Lieferzeit |
|
---|
?* Informationen zur Lieferzeit und Preisen
EIKOSHA
[Features]
· A finishing reamer for 1/5 to 1/10 taper.
ab∗ : | 237.21 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
EIKOSHA
Short type cobalt HSS and TiN coating for long service life
ab∗ : | 38.85 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
EIKOSHA
Long Type, Deep Hole Use, for Improved Guidance, 1° Bite Gradient
ab∗ : | 80.25 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
ab∗ : | 65.64 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
Minimum Lieferzeit : | 7 Arbeitstage |
---|
EIKOSHA
Spiral reamer for 1/48 and 1/50 tapered hole processing (HSS).
[Features]
· A torsion resistant type for 1/48 and 1/50 taper pins.
· By adopting strong torsion, surface roughness and chip disposal are improved and cutting resistance is reduced.
ab∗ : | 69.11 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 82.79 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
EIKOSHA
Spiral reamer for 1/10 tapered hole (HSS).
[Features]
· Morse taper shank has been adopted for machinery.
· Adoption of a twisted blade allows appropriate disposal of chips.
[Applications]
· Ideal for machining receiving holes for 1/10 taper shafts.
ab∗ : | 200.13 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
Minimum Lieferzeit : | 7 Arbeitstage |
---|
ab∗ : | 32.89 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
EIKOSHA
General purpose type. In order to improve guidance, the bite gradient is set to 1°
ab∗ : | 28.87 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
EIKOSHA
[Features]
· A reamer exclusively for blind holes.
· TiN coating is added to powdered HSS for a long service life.
ab∗ : | 81.78 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
EIKOSHA
Spiral reamer for 1/50 tapered hole processing (HSS).
[Features]
· Shank has a square section that can also be used for turning by hand.
· Adoption of twisted blade allows appropriate disposal of chips.
ab∗ : | 33.51 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
EIKOSHA
A drill and reamer integrated HSS tool.
[Features]
· The tip is a drill and the large-diameter part has a reamer shape.
· Since drilling and finishing can be done simultaneously, machining time is shortened. (For through-hole)
[Applications]
· To be used when drilling holes and finish machining at the same time.
ab∗ : | 103.11 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
EIKOSHA
[Features]
· A high-torsion type that reduces cutting resistance.
· Tapered shank type.
ab∗ : | 90.04 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
EIKOSHA
Spiral reamer for gate hole machining (HSS).
[Features]
· For mold pin point gate hole drilling.
· A wide variety of tip rounding, blade length and angles are available.
ab∗ : | 95.49 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
EIKOSHA
A high-torsion type that reduces cutting resistance.
ab∗ : | 68.40 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
EIKOSHA
[Features]
· A high-torsion type that reduces cutting resistance.
· Tapered shank type.
ab∗ : | 82.79 € |
---|---|
Minimum Lieferzeit : | 7 Arbeitstage |
*Stückpreis Standardkonfiguration
Warenzeichen |
---|
Artikelserie |
ab∗ |
Minimum Lieferzeit : |
Tool Diameter(mm) |
Shank Type |
work material |
Groove Length(mm) |
Coating Y/N |
Groove Shape |
Base Blade Y/N |
Tip diameter |
Large End Diameter |
radius R |
Both square |
|
|
|
|
| ||||||||||||||
Warenzeichen | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA |
Artikelserie | Hochgeschwindigkeits-Kegel-Spiral-Räumwerkzeug mit Pulverbeschichtung HSPTR | 1 / 10-Zoll-Kegel-Spiral-Räumwerkzeug für Endbearbeitung SPTR-RF | ||||||||||||||||
ab∗ | 237.21 € *Stückpreis Standardkonfiguration | 38.85 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2023Mengenrabatt | 80.25 € *Stückpreis Standardkonfiguration | 65.64 € *Stückpreis Standardkonfiguration | - | 69.11 € *Stückpreis Standardkonfiguration Mengenrabatt | 82.79 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2023Mengenrabatt | 200.13 € *Stückpreis Standardkonfiguration | - | 32.89 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2023Mengenrabatt | 28.87 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2023Mengenrabatt | 81.78 € *Stückpreis Standardkonfiguration | 33.51 € *Stückpreis Standardkonfiguration Mengenrabatt | 103.11 € *Stückpreis Standardkonfiguration | 90.04 € *Stückpreis Standardkonfiguration | 95.49 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/06/2023 | 68.40 € *Stückpreis Standardkonfiguration Mengenrabatt | 82.79 € *Stückpreis Standardkonfiguration |
Minimum Lieferzeit : | 7 Arbeitstage | Versand am selben Tag | 7 Arbeitstage | 7 Arbeitstage | 7 Arbeitstage | 7 Arbeitstage | Versand am selben Tag | 7 Arbeitstage | 7 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 7 Arbeitstage | 7 Arbeitstage | 7 Arbeitstage | 7 Arbeitstage | Versand am selben Tag | 7 Arbeitstage | 7 Arbeitstage |
Tool Diameter(mm) | - | 1.97 ~ 9 | 3 ~ 14 | 1/2 ~ 25 | 5 ~ 30 | - | - | - | 3 ~ 60 | 2.1 ~ 16.05 | 1/4 ~ 20.2 | 2.95 ~ 50 | - | 3 ~ 13 | 10 | - | 3 ~ 10 | 8 ~ 30 |
Shank Type | Schaftfräserschaft | Gerader Schaft | Gerader Schaft | Gerader Schaft | Kegelgewinde | Gerader Schaft | Schaftfräserschaft | Kegelgewinde | Kegelgewinde | Schaftfräserschaft / Gerader Schaft | Schaftfräserschaft / Gerader Schaft | Schaftfräserschaft | Gerader Schaft | Gerader Schaft | Kegelgewinde | Schaftfräserschaft | Gerader Schaft | Kegelgewinde |
work material | Stahl allgemein[◎] / Gusseisen[○] / Aluminium[◎] / Kupfer[◎] / Matrizenstahl[○] / Legierter Stahl[◎] | Stahl allgemein[◎] / Gusseisen[○] / Aluminium[◎] / Kupfer[◎] / Matrizenstahl[○] / Legierter Stahl[○] | Stahl allgemein[○] / Gusseisen[○] / Aluminium[○] / Kupfer[○] / Legierter Stahl[○] | Stahl allgemein[○] / Gusseisen[○] / Aluminium[○] / Kupfer[○] / Legierter Stahl[○] | Stahl allgemein[○] / Gusseisen[○] / Aluminium[○] / Kupfer[○] / Legierter Stahl[○] | Stahl allgemein[○] / Gusseisen[○] / Aluminium[○] / Kupfer[○] / Legierter Stahl[○] | Stahl allgemein[○] / Gusseisen[○] / Aluminium[○] / Kupfer[○] / Legierter Stahl[○] | Stahl allgemein[○] / Gusseisen[○] / Aluminium[○] / Kupfer[○] / Legierter Stahl[○] | Stahl allgemein[○] / Gusseisen[○] / Aluminium[○] / Kupfer[○] / Matrizenstahl[○] / Legierter Stahl[○] | Abgeschreckter und gehärteter Stahl[○] / Edelstahl[○] / Gusseisen[○] / Aluminium[◎] / Kupfer[◎] / Matrizenstahl[○] / Temperaturbeständige Legierung[○] / Legierter Stahl[○] | Stahl allgemein[○] / Gusseisen[○] / Aluminium[○] / Kupfer[○] / Matrizenstahl[○] / Legierter Stahl[○] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[○] / Edelstahl[○] / Gusseisen[◎] / Aluminium[◎] / Kupfer[◎] / Matrizenstahl[○] / Temperaturbeständige Legierung[○] / Legierter Stahl[◎] | Stahl allgemein[○] / Aluminium[○] / Kupfer[○] / Legierter Stahl[○] | Stahl allgemein[○] / Gusseisen[○] / Aluminium[○] / Kupfer[○] / Legierter Stahl[○] | Stahl allgemein[◎] / Gusseisen[○] / Aluminium[◎] / Kupfer[◎] / Matrizenstahl[○] / Legierter Stahl[○] | Stahl allgemein[○] / Gusseisen[○] / Aluminium[○] / Kupfer[○] / Legierter Stahl[○] | Stahl allgemein[◎] / Gusseisen[○] / Aluminium[◎] / Kupfer[◎] / Matrizenstahl[○] / Legierter Stahl[○] | Stahl allgemein[◎] / Gusseisen[○] / Aluminium[◎] / Kupfer[◎] / Matrizenstahl[○] / Legierter Stahl[○] |
Groove Length(mm) | 40 ~ 55 | 11 ~ 36 | 80 ~ 200 | 20 ~ 65 | 120 ~ 300 | 28 ~ 318 | 60 ~ 160 | 60 ~ 100 | 35 ~ 190 | 15 ~ 45 | 30 ~ 120 | 16 ~ 30 | 48 ~ 318 | 52 ~ 100 | 40 | 25 ~ 150 | 24 ~ 60 | 40 ~ 75 |
Coating Y/N | N/A | Verfügbar | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | Verfügbar | N/A | N/A | N/A | N/A | N/A | N/A |
Groove Shape | Spiralform | Spiralform | Spiralform | Spiralform | Spiralform | Schraubenförmig | Spiralform | Spiralform | Spiralform | Schraubenförmig | Spiralform | Spiralform | Spiralform | Spiralform | Schraubenförmig | Spiralform | Schraubenförmig | Schraubenförmig |
Base Blade Y/N | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | Verfügbar | N/A | N/A | N/A | Verfügbar | N/A | N/A |
Tip diameter | - | - | - | - | - | 1 ~ 30 | 2 ~ 10 | 10.5 ~ 25 | - | - | - | - | 1.9 ~ 29.7 | - | - | - | - | - |
Large End Diameter | 12.2 ~ 30.2 | - | - | - | - | 1.46 ~ 36.06 | 3.04 ~ 37.99 | 16 ~ 34.5 | - | - | - | - | 2.86 ~ 36.06 | - | - | 1.43 ~ 15.3 | - | - |
radius R | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.5 ~ 2.5 | - | - |
Both square | 1/5T ~ 1/10T | - | - | - | - | 1/50 | 1 ~ 10 | 1/10 | - | - | - | - | 1/50 | - | - | 1゚ ~ 5゚ | - | - |
Loading...
Helfen Sie uns dabei, unsere Webseite noch weiter zu verbessern.
Bitte geben Sie uns Ihr Feedback zu unserem MISUMI e-Katalog.
Vielen Dank für Ihre Unterstützung.
Bitte nutzen Sie das Anfrageformular, wenn Sie eine umgehende Antwort von uns wünschen.