Lieferzeit |
|
---|
?* Informationen zur Lieferzeit und Preisen
FPTOOLS
Complete blind hole drilling is possible. Newly developed special blade coating. End mill shank is adopted.
* Product name was changed from SH to CE. Although there is no change in the standards and price, the label of the delivered product may be that of the former SH series.
ab∗ : | 83.99 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
FPTOOLS
[Features]
· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.
· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.
· High durability: Excellent durability, maintaining precision over long periods of time.
· Application: General work materials.
ab∗ : | 52.68 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
FPTOOLS
Blade diameter dimensions can be adjusted to achieve the functionality of dozens of solid reamers with just the one reamer.
ab∗ : | 90.40 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
FPTOOLS
[Features]
· The most universally usable reamer among all series of carbide reamers.
· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.
· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.
· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
ab∗ : | 20.58 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
FPTOOLS
[Features]
· Cutting speed can be increased by 50% compared to carbide straight blade types.
· Ideal for deep drilling: Long neck section.
· Excellent anterior chip discharge: 30° torsion, left
ab∗ : | 84.02 € |
---|---|
Besonderer Preis | |
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
FPTOOLS
Cutting capacity for quenched hardness around 60 HRC, thanks to purple coating for high-hardness steel and right-lead blade shape. Shank diameter is endmill shank type.
ab∗ : | 59.32 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
FPTOOLS
[Features]
· Reamer shape ideal for high-speed machining: Achieves high-precision and high-speed machining thanks to its high torsion, highly rigid blade shape and eccentric chamfer blade.
· Special coating: Features a special coating with an excellent oxidation resistance temperature and friction coefficient. This coating helps improve the tool service life and allows smooth cutting chip processing.
· High-precision end mill shank: Shank tolerance of h5 is adopted.
· Effective for machining stainless steel: General-purpose F.P. Platinum Reamer can even be used for high-speed machining of stainless steel.
ab∗ : | 86.06 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
FPTOOLS
[Merkmale]
Es ist möglich, Bohrungen aus allgemeinem Stahl hochglanzpoliert zu bohren, und es ist möglich, ohne nachfolgende Pilotbohrung zu bohren.
ab∗ : | 37.33 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
FPTOOLS
[Features]
· Ultra-low price contributes to cost reductions.
· Carbide is used for the reamer, greatly reducing the price.
· It will help reduce the machining costs by the improvement of tool life and reduction of tool costs.
· Deep hole machining possible: Thinner shank diameter makes it possible to machine deep holes.
· The processing range can be expanded.
· High-precision: Precision equivalent to the best-selling carbide reamer "G-Series".
· Can be used with peace of mind
ab∗ : | 34.72 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
Warenzeichen |
---|
Artikelserie |
ab∗ |
Minimum Lieferzeit : |
Tool Diameter(mm) |
Shank Type |
work material |
Groove Length(mm) |
Coating Y/N |
Groove Shape |
Base Blade Y/N |
Tip diameter |
Large End Diameter |
radius R |
Both square |
|
|
|
|
| |||||
Warenzeichen | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS |
Artikelserie | |||||||||
ab∗ | 83.99 € *Stückpreis Standardkonfiguration Mengenrabatt | 52.68 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/09/2023Mengenrabatt | 90.40 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/09/2023Mengenrabatt | 20.58 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/09/2023Mengenrabatt | 84.02 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis bis 30/09/2023Mengenrabatt | 59.32 € *Stückpreis Standardkonfiguration Mengenrabatt | 86.06 € *Stückpreis Standardkonfiguration Mengenrabatt | 37.33 € *Stückpreis Standardkonfiguration Mengenrabatt | 34.72 € *Stückpreis Standardkonfiguration Mengenrabatt |
Minimum Lieferzeit : | 6 Arbeitstage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage |
Tool Diameter(mm) | 1 ~ 14.05 | 0.5 ~ 10.009 | 12.00~13.50 ~ 30.25~34.25 | 0.2 ~ 12.1 | 1 ~ 15.5 | 1 ~ 12.1 | 2.95 ~ 12.005 | 0.9 ~ 14 | 2.91 ~ 12.1 |
Shank Type | Schaftfräserschaft | Schaftfräserschaft | - | Schaftfräserschaft | Schaftfräserschaft | Schaftfräserschaft | Schaftfräserschaft | Gerader Schaft | Schaftfräserschaft |
work material | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[○] / Edelstahl[○] / Gusseisen[○] / Aluminium[○] / Kupfer[○] / Matrizenstahl[◎] / Legierter Stahl[◎] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[○] / Edelstahl[○] / Gusseisen[◎] / Aluminium[○] / Kupfer[○] / Kunststoff[○] / Matrizenstahl[◎] / Legierter Stahl[◎] | Stahl allgemein[○] / Legierter Stahl[○] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[○] / Edelstahl[○] / Gusseisen[◎] / Aluminium[○] / Kupfer[○] / Kunststoff[○] / Matrizenstahl[◎] / Legierter Stahl[◎] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[○] / Gusseisen[◎] / Kunststoff[○] / Matrizenstahl[○] / Legierter Stahl[◎] | Abgeschreckter und gehärteter Stahl[◎] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[○] / Edelstahl[◎] / Gusseisen[○] / Aluminium[○] / Kupfer[○] / Matrizenstahl[◎] / Legierter Stahl[◎] | Stahl allgemein[○] / Kunststoff[○] / Legierter Stahl[○] | Stahl allgemein[◎] / Abgeschreckter und gehärteter Stahl[○] / Edelstahl[○] / Gusseisen[◎] / Aluminium[○] / Kupfer[○] / Kunststoff[○] / Matrizenstahl[◎] / Legierter Stahl[◎] |
Groove Length(mm) | 5 ~ 30 | 5 ~ 40 | 42 ~ 98 | 3 ~ 45 | 8 ~ 45 | 15 ~ 65 | 15 ~ 40 | 20 ~ 70 | 20 ~ 25 |
Coating Y/N | Verfügbar | N/A | - | N/A | N/A | Verfügbar | Verfügbar | N/A | N/A |
Groove Shape | Spiralform | Gerade | - | Gerade | Spiralform | Spiralform | Spiralform | Gerade | Gerade |
Base Blade Y/N | Verfügbar | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
Tip diameter | - | - | - | - | - | - | - | - | - |
Large End Diameter | - | - | - | - | - | - | - | - | - |
radius R | 1 ~ 2.5 | - | - | - | - | - | - | - | - |
Both square | - | - | - | - | - | - | - | - | - |
Loading...
Helfen Sie uns dabei, unsere Webseite noch weiter zu verbessern.
Bitte geben Sie uns Ihr Feedback zu unserem MISUMI e-Katalog.
Vielen Dank für Ihre Unterstützung.
Bitte nutzen Sie das Anfrageformular, wenn Sie eine umgehende Antwort von uns wünschen.