- Aus technischen Gründen ist eine Kreditkartenzahlung temporär nicht möglich. Wir bitten etwaige Unannehmlichkeiten zu entschuldigen.
NAKAJIMAKOUKI Zentrieren/Senken
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit
-
NAKAJIMAKOUKI
A center drill manufactured with tempering using the best heat treatment
- Mengenrabatt
Minimum Lieferzeit ： 3 Arbeitstage -
Zentrierbohrer, Okabe Standard, JIS-Typ 1 60°
NAKAJIMAKOUKI
A center drill manufactured with tempering using the best heat treatment
- Mengenrabatt
ab∗ ： 12.63 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
NAKAJIMAKOUKI
A center drill manufactured with tempering using the best heat treatment
- Mengenrabatt
ab∗ ： 10.52 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
NAKAJIMAKOUKI
A center drill manufactured with tempering using the best heat treatment
ab∗ ： 10.34 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Zentrierbohrer, JIS B Typ 60°x120°
NAKAJIMAKOUKI
A center drill manufactured with tempering using the best heat treatment
- Mengenrabatt
ab∗ ： 15.03 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Zentrierbohrer, Okabe Standard, Typ 1 60°
NAKAJIMAKOUKI
A center drill manufactured with tempering using the best heat treatment
- Mengenrabatt
ab∗ ： 5.58 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Zentrierbohrer, Okabe Standard, Typ 1 90°
NAKAJIMAKOUKI
A center drill manufactured with tempering using the best heat treatment
- Mengenrabatt
ab∗ ： 13.29 € Minimum Lieferzeit ： 4 Arbeitstage *Stückpreis Standardkonfiguration
-
Zentrierbohrer, Okabe Standard, Typ 1, G Beschichtung 60°
NAKAJIMAKOUKI
A center drill manufactured with tempering using the best heat treatment
Minimum Lieferzeit ： 3 Arbeitstage -
Zentrierbohrer, Okabe Standard, Typ 1, G Beschichtung 90°
NAKAJIMAKOUKI
A center drill manufactured with tempering using the best heat treatment
Minimum Lieferzeit ： 3 Arbeitstage -
Zentrierbohrer, Okabe-Standard, Typ 1, linke Klinge 60°
NAKAJIMAKOUKI
A center drill manufactured with tempering using the best heat treatment
Minimum Lieferzeit ： 5 Arbeitstage -
Zentrierbohrer, Okabe Standard, Typ 1, Hartmetall 60°
NAKAJIMAKOUKI
A center drill manufactured with tempering using the best heat treatment
ab∗ ： 86.44 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Zentrierbohrer, Okabe Standard, Typ 1, Hartmetall, 90°
NAKAJIMAKOUKI
A center drill manufactured with tempering using the best heat treatment
ab∗ ： 87.20 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Zentrierbohrer, Okabe Standard, JIS-Typ 1 90°
NAKAJIMAKOUKI
A center drill manufactured with tempering using the best heat treatment
ab∗ ： 11.72 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Zentrierbohrer, Okabe Standard, JIS-Typ 1, G Beschichtung 60°
NAKAJIMAKOUKI
A center drill manufactured with tempering using the best heat treatment
ab∗ ： 21.05 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Zentrierbohrer, Okabe Standard, JIS-Typ 1, G Beschichtung 90°
NAKAJIMAKOUKI
A center drill manufactured with tempering using the best heat treatment
ab∗ ： 23.31 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Zentrierbohrer, Okabe Standard, JIS-Typ 2 60°x120°
NAKAJIMAKOUKI
A center drill manufactured with tempering using the best heat treatment
- Mengenrabatt
ab∗ ： 22.29 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Zentrierbohrer, Okabe Standard, R, Typ R
NAKAJIMAKOUKI
A center drill manufactured with tempering using the best heat treatment
- Mengenrabatt
ab∗ ： 16.24 € Minimum Lieferzeit ： 3 Arbeitstage *Stückpreis Standardkonfiguration
-
Zentrierbohrer, Okabe Standard, langer Zentrierbohrer 60°
NAKAJIMAKOUKI
A center drill manufactured with tempering using the best heat treatment
- Mengenrabatt
Minimum Lieferzeit ： 3 Arbeitstage -
Zentrierbohrer, Okabe Standard, langer Zentrierbohrer 90°
NAKAJIMAKOUKI
A center drill manufactured with tempering using the best heat treatment
- Mengenrabatt
Minimum Lieferzeit ： 4 Arbeitstage -
Zentrierbohrer, Okabe Standard, langer Zentrierbohrer, G-Beschichtung 60°
NAKAJIMAKOUKI
A center drill manufactured with tempering using the best heat treatment
- Mengenrabatt
Minimum Lieferzeit ： 5 Arbeitstage -
Zentrierbohrer, Okabe Standard, langer Zentrierbohrer, G-Beschichtung 90°
NAKAJIMAKOUKI
A center drill manufactured with tempering using the best heat treatment
- Mengenrabatt
Minimum Lieferzeit ： 4 Arbeitstage -
Zentrierbohrer, Semi-Standard Okabe, Typ 1 60°
NAKAJIMAKOUKI
A center drill manufactured with tempering using the best heat treatment
- Mengenrabatt
ab∗ ： 14.19 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Zentrierbohrer, Semi-Standard Okabe, Typ 1 90°
NAKAJIMAKOUKI
A center drill manufactured with tempering using the best heat treatment
- Mengenrabatt
ab∗ ： 15.23 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Application |
| Tip angle (θ) |
| Tool Diameter (D)(mm) |
| work material |
| Single blade, two blades |
| Peripheral Blade Y/N |
| Tool Material Type |
| Coating Y/N |
| Coating Type |
| R Size (R)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | NAKAJIMAKOUKI | NAKAJIMAKOUKI | NAKAJIMAKOUKI | NAKAJIMAKOUKI | NAKAJIMAKOUKI | NAKAJIMAKOUKI | NAKAJIMAKOUKI | NAKAJIMAKOUKI | NAKAJIMAKOUKI | NAKAJIMAKOUKI | NAKAJIMAKOUKI | NAKAJIMAKOUKI | NAKAJIMAKOUKI | NAKAJIMAKOUKI | NAKAJIMAKOUKI | NAKAJIMAKOUKI | NAKAJIMAKOUKI | NAKAJIMAKOUKI | NAKAJIMAKOUKI | NAKAJIMAKOUKI | NAKAJIMAKOUKI | NAKAJIMAKOUKI | NAKAJIMAKOUKI |
| Artikelserie | Zentrierbohrer, Okabe Standard, JIS-Typ 1, G Beschichtung 60° | Zentrierbohrer, Okabe Standard, JIS-Typ 1, G Beschichtung 90° | Zentrierbohrer, Okabe Standard, langer Zentrierbohrer, G-Beschichtung 60° | Zentrierbohrer, Okabe Standard, langer Zentrierbohrer, G-Beschichtung 90° | |||||||||||||||||||
| ab∗ | - Mengenrabatt | 12.63 € *Stückpreis Standardkonfiguration Mengenrabatt | 10.52 € *Stückpreis Standardkonfiguration Mengenrabatt | 10.34 € *Stückpreis Standardkonfiguration | 15.03 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.58 € *Stückpreis Standardkonfiguration Mengenrabatt | 13.29 € *Stückpreis Standardkonfiguration Mengenrabatt | - | - | - | 86.44 € *Stückpreis Standardkonfiguration | 87.20 € *Stückpreis Standardkonfiguration | 11.72 € *Stückpreis Standardkonfiguration | 21.05 € *Stückpreis Standardkonfiguration | 23.31 € *Stückpreis Standardkonfiguration | 22.29 € *Stückpreis Standardkonfiguration Mengenrabatt | 16.24 € *Stückpreis Standardkonfiguration Mengenrabatt | - Mengenrabatt | - Mengenrabatt | - Mengenrabatt | - Mengenrabatt | 14.19 € *Stückpreis Standardkonfiguration Mengenrabatt | 15.23 € *Stückpreis Standardkonfiguration Mengenrabatt |
| Minimum Lieferzeit ： | 3 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 5 Arbeitstage | 3 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 3 Arbeitstage | 3 Arbeitstage | 4 Arbeitstage | 5 Arbeitstage | 4 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage |
| Application | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) |
| Tip angle (θ) | 60 | 60 | 60 | 90 | 60×120 | 60 | 90 | 60 | 90 | 60 | 60 | 90 | 90 | 60 | 90 | 60×120 | 60 | 60 | 90 | 60 | 90 | 60 | 90 |
| Tool Diameter (D)(mm) | 0.5 ～ 10 | 0.7 ～ 6 | 0.5 ～ 10 | 1 ～ 6.3 | 0.5 ～ 10 | 0.3 ～ 12 | 0.3 ～ 10 | 0.3 ～ 12 | 0.3 ～ 10 | 0.3 ～ 6 | 0.3 ～ 6 | 0.3 ～ 6 | 0.7 ～ 6 | 0.7 ～ 6 | 0.7 ～ 6 | 1 ～ 6 | 0.7 ～ 6 | 1 ～ 5 | 1 ～ 5 | 1 ～ 5 | 1 ～ 5 | 1.1 ～ 4.5 | 1.1 ～ 4.5 |
| work material | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | general steel[○] | general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] | general steel[○] | general steel[○] | general steel[○] | general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | general steel[○] | general steel[○] |
| Single blade, two blades | Double-edged | Double-edged | Double-edged | Double-edged | Double-edged | Double-edged | Double-edged | Double-edged | Double-edged | Double-edged | Single blade / Double-edged | Double-edged | Double-edged | Double-edged | Double-edged | Double-edged | Double-edged | Double-edged | Double-edged | Double-edged | Double-edged | Double-edged | Double-edged |
| Peripheral Blade Y/N | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA | NA |
| Tool Material Type | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | Carbide | Carbide | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel |
| Coating Y/N | NA | NA | NA | NA | NA | NA | NA | Available | Available | NA | NA | NA | NA | Available | Available | NA | NA | NA | NA | Available | Available | NA | NA |
| Coating Type | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | TiN | Non-Coated | Non-Coated |
| R Size (R)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 3.5 ～ 18 | - | - | - | - | - | - |
Loading...
Konfigurieren
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Application
-
Centering (Positioning)
-
Hole Chamfer
-
Chamfering/Horizontal
-
V Groove
-
Drilling
-
Centering (Positioning)
-
Tip angle (θ)
- 30
- 45
- 60
- 60°
- 60×120
- 80
- 90
- 90°
- Center Hole Angle: 90°
- Cutter Tip Angle: 100°
- 118
- 120
- 125°
-
Tool Diameter (D)(mm)
- 0.03
- 0.04
- 0.05
- 0.06
- 0.07
- 0.08
- 0.09
- 0.1
- 0.11
- 0.12
- 0.13
- 0.14
- 0.15
- 0.16
- 0.17
- 0.18
- 0.19
- 0.2
- 0.21
- 0.22
- 0.23
- 0.24
- 0.25
- 0.26
- 0.27
- 0.28
- 0.29
- 0.3
- 0.35
- 0.4
- 0.45
- 0.5
- 0.55
- 0.6
- 0.63
- 0.65
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1～2.12
- 1 to 2.5
- 1/8
- 1/16
- 1/32
- 1/64
- 1.1
- 1.2
- 1.25
- 1.25～2.65
- 1.3
- 1.4
- 1.5
- 1.5 to 4
- 1.6
- 1.6～3.35
- 1.7
- 1.8
- 1.9
- 2.
- 2
- 2～4.25
- 2~5
- 2.1
- 2.2
- 2.3
- 2.4
- 2.5
- 2.5～5.3
- 2.5 to 6.5
- 2.6
- 2.7
- 2.8
- 2.9
- 2.95
- 3
- 3–6
- 3–8
- 3/16
- 3/32
- 3/64
- 3.1
- 3.15
- 3.15～6.7
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 4
- 4～8.5
- 4–10
- 4.3
- 4.5
- 5
- 5～10.6
- 5–12
- 5/16
- 5/32
- 5/64
- 5.3
- 5.6
- 5.8
- 6
- 6~15
- 6.3
- 6.3,8.3,10.4,12.4,16.5,20.5
- 6.3/8.3/10.4/12.4/16.5/20.5
- 6.3～13.2
- 6.35
- 6.5
- 7
- 7.3
- 7.7
- 8
- 8 to 17
- 8.3
- 9
- 9.4
- 9.5
- 9.52
- 10
- 10.0(+0.3)
- 10～21.2
- 10.4
- 11
- 11.2
- 11.5
- 12
- 12.4
- 12.5
- 12.7
- 13
- 13.4
- 14
- 14.4
- 15
- 15.0(+0.3)
- 15.87
- 16
- 16.5
- 16.5,20.5,25.0,37.0
- 18
- 18.5
- 19
- 19.05
- 19.5
- 20
- 20.0(+0.3)
- 20.5
- 21
- 22
- 22.4
- 22.5
- 23
- 25
- 25.0(+0.3)
- 25.4
- 26
- 27
- 28
- 30
- 30.0(+0.3)
- 31
- 31.5
- 32
- 34
- 35
- 35.5
- 36
- 37
- 40
- 45
- 46
- 50
- 55
- 60
- 63
- 65
- 70
- 75
- 80
- 90
- 95
- 100
-
work material
- general steel
- Quenched and tempered steel
- high hardness steel
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
-
Single blade, two blades
-
Peripheral Blade Y/N
-
Tool Material Type
- High-speed steel
- Cobalt HSS
- Carbide
-
Coating Y/N
-
Coating Type
-
R Size (R)(mm)
Suchergebnisse durch Herstellerauswahl einschränken
-
- MISUMI (23)
- YAMAWA MFG (55)
- IWATA TOOL (40)
- GUHRING (29)
- NAKAJIMAKOUKI ()
- ILIX (17)
- WATERMILLS (14)
- ATOM (9)
- EIKOSHA (9)
- NOGAJAPAN (6)
- TRUSCO NAKAYAMA (5)
- RUKO (4)
- ALPEN (3)
- DIXI (3)
- TAIYO-TOOL (3)
- ATI (2)
- OSG (2)
- SKC (2)
- DIJET (1)
- MAPAL (1)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Kategorien beziehen sich auf Zentrieren/Senken
Bezahlverfahren
MISUMISales area
Copyright © MISUMI Corporation All Rights Reserved.
Helfen Sie uns dabei, unsere Webseite noch weiter zu verbessern.
Bitte geben Sie uns Ihr Feedback zu unserem MISUMI e-Katalog.
Vielen Dank für Ihre Unterstützung.
Bitte nutzen Sie das Anfrageformular, wenn Sie eine umgehende Antwort von uns wünschen.