TYPENCODE Suche | *NOT READY*: #CODE

Suchwort-Vorschlag

Vorgeschlagene Teilenummer

Auslaufprodukte

THK Profilschienenführungen mit Wälzkörpern（Vorspannung：Standard）

Eingeschränkte Suche durch Präzisierung Ausführung - Führungswagen

Standard
Kurz
Breit
Groß
Lang
Extralang
Breit Kurz

Daten, die angezeigt werden sollen: 30; 45; 60

Sortieren nach:

?* Informationen zur Lieferzeit und Preisen

Miniatur-Profilschienenführungen / SRS / Wagendimensionen wählbar

THK

A miniature type with a compact structure. Can be mounted in areas in space saving areas, and a part of the LM block has been formed using resin to achieve lightweight.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.

2D / 3D CAD Daten verfügbar

Minimum Lieferzeit ： 14 Arbeitstage
Profilschienenführungen / SHS / Material wählbar / Wagendimensionen wählbar

THK

A standard type of LM guide with ball retainer. Incurs load from four directions which allows it to be used in any position.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.

2D / 3D CAD Daten verfügbar

Minimum Lieferzeit ： 14 Arbeitstage
Profilschienenführungen / HRW / Material wählbar / breiter Wagen

THK

A structure with a wide rail width and low center of gravity. HSR It is advantageous when there are Mc moment requirements and is thin compared with.

[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Compact heavy load: A high number of effective balls makes it possible to obtain high rigidity in all directions. Has a wide rail width and can adequately withstand moments with a single shaft.
There is a high rigidity in the horizontal direction and there is no need to for reinforcement such as horizontal pressing due to large secondary moments being incurred on the rail cross-section.
· The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.

2D / 3D CAD Daten verfügbar

Minimum Lieferzeit ： 14 Arbeitstage
Profilschienenführungen / SHW / Material wählbar / breiter Wagen

THK

A structure with a wide rail width and low center of gravity. SHS It is advantageous when there are Mc moment requirements and is thin compared with.

[Features]
· A highly rigid LM guide that is capable of superior high speeds, maintenance-free over long periods of time, and having low noise due to the adoption of a ball retainer.
· The SHW, which has a structure with a width LM rail width and a low center of gravity, is ideal for use in locations where there are space limitations, and when there are MC moment rigidity requirements.
· Each of the rail rows has been arranged in an array at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and can be used for a wide range of application.
· The self-aligning capability achieved from the unique circular arched-groove front face combination (DF set) makes it possible to absorb the mounting error even when there is a preload incurred, and it is also capable of obtaining a smooth linear motion at a high accuracy.
· The ball retainers eliminate the mutual friction between the balls and holds the lubricant oil (agent) to achieve superior low-dust performance.

2D / 3D CAD Daten verfügbar

Minimum Lieferzeit ： 14 Arbeitstage

Minimum Lieferzeit ：	14 Arbeitstage

Minimum Lieferzeit ：	14 Arbeitstage

Minimum Lieferzeit ：	14 Arbeitstage

Minimum Lieferzeit ：	14 Arbeitstage

Führungswagen für Profilschienen / SR / Kugelumlauf / Wagendimensionen wählbar

THK

An individual block item from the THK LM guide SR series. Extremely useful for sudden design changes and when performing maintenance.

[Features]
· Circulates the ball row using the end plate that is assembled
· in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
· Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.

Mengenrabatt

2D / 3D CAD Daten verfügbar

ab^∗ ：	46.67 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Profilschienenführungen / SR / Material wählbar / Wagendimensionen wählbar

THK

A type with a compact structure that has a low cross-section height and is resilient against loads in the radial direction. More advantageous than HSR when incurring loads in the radial direction (longevity, precision, rigidity, etc.).

[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
· A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.
· This is a self-aligning type that can easily absorb error in the level precision and the degree of parallelism for the two shafts, which is capable of highly precise and smooth movements.
· The retainer part on each of the ball rows can obtain rolling motions with limited sound because of the balls being designed to smoothly circulate using the guiding part on the end plate.
· It is possible to maintain precision of long periods of time, have excellent abrasion resistance and limited differential slipping even when there is a preload or uneven loads.
· LM block, LM rail, and LM rail are all compatible with stainless steel.

2D / 3D CAD Daten verfügbar

Minimum Lieferzeit ： 14 Arbeitstage
Miniatur-Profilschienenführungen / SHS-Typ

THK

A best selling THK product. The SHS series can be used in any position.
*When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.

2D / 3D CAD Daten verfügbar

Minimum Lieferzeit ： 7 Arbeitstage
Miniatur-Profilschienenführungen / SRS-G / Wagendimensionen wählbar

THK

A full-ball type with not ball retainer on the SRS type.

[Features]
· The LM guide with ball retainer SRS type has a structure that includes two rolling sides on a compact body, which allows the load to be incurred from all sides, and can be used with a single shaft at locations that have limited space requirements and locations that use moment.
· The adoption of the ball retainer has eliminated mutual friction between the balls, which provides excellent high speed, low noise, good sound quality, long life, and being maintenance-free for long periods of time.
· The ball retainer eliminates the mutual friction between the balls, which improves the grease holdability and reduces the raised dust amount.
· The LM block and LM rail both use stainless steel that are highly rust-proof.
· The rail cross-section height is kept low, and it has a compact structure with a single left and right ball row, which allows it be mounted in space saving areas.
· This is a lightweight type where a part (around the ball escape hole, etc.) of the LM block has been insert formed using resin materials.

2D / 3D CAD Daten verfügbar

Minimum Lieferzeit ： 19 Arbeitstage
Profilschienenführungen / HSR / Material wählbar / Wagendimensionen wählbar

THK

A standard full-ball type. Incurs load from four directions which allows it to be used in any position. A series with the most abundance in variations in size and shape, etc.
* When ordering multiple shaft types, please input a multiple of the number of required shaft types as your order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.

2D / 3D CAD Daten verfügbar

Minimum Lieferzeit ： 14 Arbeitstage
Profilschienen / HSR / Material wählbar

THK

No need to fret over delivery because the THK LM guide ships in three days. We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.

2D / 3D CAD Daten verfügbar

Minimum Lieferzeit ： 7 Arbeitstage

Minimum Lieferzeit ：	14 Arbeitstage

Minimum Lieferzeit ：	7 Arbeitstage

Minimum Lieferzeit ：	19 Arbeitstage

Minimum Lieferzeit ：	14 Arbeitstage

Minimum Lieferzeit ：	7 Arbeitstage

Führungswagen für Profilschienen / SHS / großer Wagen, Wagendimensionen wählbar

THK

An individual block from the THK LM guide SHS series. Extremely useful for sudden design changes and when performing maintenance.

[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions.
·
· Cross-section

Mengenrabatt

2D / 3D CAD Daten verfügbar

ab^∗ ：	72.04 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Profilschienenführungen / SSR / Material wählbar / Wagendimensionen wählbar

THK

Radial type that is strong against loads in the radial direction. More advantageous than SHS when incurring loads in the radial direction (longevity, precision, rigidity, etc.). A stainless steel type not featured with the SHS is also available.
*When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.

2D / 3D CAD Daten verfügbar

Minimum Lieferzeit ： 14 Arbeitstage
Profilschienen / SR

THK

We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.

[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM block is removed from the LM rail because it is held by a holding plate.
· Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.
· A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.
· Palm of the two shafts

2D / 3D CAD Daten verfügbar

Minimum Lieferzeit ： 7 Arbeitstage
Profilschienen / HRW / Material wählbar / breite Schiene

THK

We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.

[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM rail is removed because it is held by a holding plate. (Excludes the HRW12 and 14LR types) each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) where there is action on the M block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance

Mengenrabatt

2D / 3D CAD Daten verfügbar
Minimum Lieferzeit ： 7 Arbeitstage
Miniatur-Profilschienenführungen / SRS-Typ

THK

A best selling THK product. The SRS series is designed for installation to locations in which space is at a premium.
*When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.

2D / 3D CAD Daten verfügbar

Minimum Lieferzeit ： 7 Arbeitstage
Profilschienen / SHS

THK

No need to fret over delivery because the THK LM guide ships in three days. We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.

2D / 3D CAD Daten verfügbar

Minimum Lieferzeit ： 7 Arbeitstage

Minimum Lieferzeit ：	14 Arbeitstage

Minimum Lieferzeit ：	7 Arbeitstage

Minimum Lieferzeit ：	7 Arbeitstage

Minimum Lieferzeit ：	7 Arbeitstage

Minimum Lieferzeit ：	7 Arbeitstage

Führungswagen für Profilschienen / SSR / Wagendimensionen wählbar

THK

An individual block from the THK LM guide SSR series. Extremely useful for sudden design changes and when performing maintenance.

[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· This ball retainer has been adopted which has eliminated mutual friction between balls and also improves the holding power of the grease.
· , which makes it possible to be maintenance-free over a long term, have a long life, have excellent high speed, and low noise.
· Compact / radial type: A compact type with a low cross-sectional height, which is ideal for horizontal guide parts for ball contact structures that are strong against loads in the radial direction.

Mengenrabatt

2D / 3D CAD Daten verfügbar

ab^∗ ：	51.04 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Profilschienenführungen / HSR-Modell / Kugelkette

THK

A best selling THK product. The HSR series can be used in any position.
*When ordering multiple shaft types, input multiples of the number of required shafts as the order quantity.
(Example) required shafts: 2(-II)⇒ Order quantity: "2, 4, 6..."
Required shafts: 3 3(-III)⇒ Order quantity: "3, 6, 9..."
Please place your orders in this manner.

2D / 3D CAD Daten verfügbar

Minimum Lieferzeit ： 7 Arbeitstage

Minimum Lieferzeit ：	7 Arbeitstage

Führungswagen für Profilschienen / SHW / breiter Wagen, Wagendimensionen wählbar

THK

An individual block from the THK LM guide SHW series. Extremely useful for sudden design changes and when performing maintenance.

Mengenrabatt

2D / 3D CAD Daten verfügbar

ab^∗ ：	125.20 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Führungswagen für Profilschienen / HRW / Material wählbar / Kugelumlauf / breiter Wagen, Wagendimensionen wählbar

THK

An individual block from the THK LM guide HRW series. Extremely useful for sudden design changes and when performing maintenance.

Mengenrabatt

2D / 3D CAD Daten verfügbar

ab^∗ ：	104.99 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Führungswagen für Profilschienen / HSR / Material wählbar / Kugelumlauf / großer Wagen, Wagendimensionen wählbar

THK

An individual block from the THK LM guide HSR series. Extremely useful for sudden design changes and when performing maintenance.

[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· The ball will not fall out even if the LM rail is removed because it is held by a holding plate. (Excludes the HSR8,10, and 12).
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used in any position, and is also stable due to incurring a preload with a good balance, and makes it possible to maintain a constant low friction coefficient, and increase rigidity in four directions. Has a low cross-section height, and the LM block has been designed with a high rigidity, which allows for highly precise and consistent linear motion.

Mengenrabatt

2D / 3D CAD Daten verfügbar

ab^∗ ：	64.07 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Profilschienenführungen / SR-M1-Typ

THK

High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.

2D CAD Daten verfügbar

Minimum Lieferzeit ： 39 Arbeitstage
Profilschienen / SSR / Material wählbar

THK

No need to fret over delivery because the THK LM guide ships in three days. We have started selling individual rails due to customer requests we have received. The rail length can be designated at units of 1 mm.

2D / 3D CAD Daten verfügbar

Minimum Lieferzeit ： 7 Arbeitstage
Profilschienenführungen / HSR-M1-Modell

THK

High temperature specifications that can be used in maximum temperatures of 150°C, and the grease can also be used in high temperature environments. Has low rolling resistance fluctuation in response to changes in temperature and a dimension consistency treatment has been applied, which has provided excellent dimensional consistency.

[Features]
· Circulates the ball row using the end plate that is assembled in the LM block when the ball rotates the rotating side with four rows that have been precision ground into the LM block and LM rail.
· Each of the rail rows has been positioned at a 45° contact angle so that the rated load will be the same for all four directions (radial direction, reverse radial direction, horizontal direction) that act on the LM block, which allows it to be used from any position.
· The LM guide for use in high temperatures can be used in even higher temperatures of up to 150°C as a result of using a unique technology for the materials, heat treatment, and lubricant.
· Can now be used in temperatures of up to 150°C by using stainless steel end rails and end rails that utilize rubber materials for use in high temperatures.
· A dimensional consistency treatment has been applied to achieve excellent dimensional consistency after applying heat or cooling (may thermally expand under high temperatures).
· The LM block, LM rail, and balls all use stainless steel with excellent corrosion resistance, which is ideal for use in clean rooms.
· Uses a grease for use in high temperatures with limited rolling resistance fluctuations resulting from grease even when the temperature fluctuates from a normal temperature to a high temperature.

2D CAD Daten verfügbar

Minimum Lieferzeit ： 54 Arbeitstage

Minimum Lieferzeit ：	39 Arbeitstage

Minimum Lieferzeit ：	7 Arbeitstage

Minimum Lieferzeit ：	54 Arbeitstage


Warenzeichen
Artikelserie
CAD
ab^∗
Minimum Lieferzeit ：
Ausführung - Führungswagen
Ausführung - Schiene
Breite - Führungsschiene(mm)
[H] Höhe - Montage(mm)
Werkstoff
Anzahl Führungswagen
[L] Länge - Schiene(mm)
Vorspannung
Genauigkeit
Nominale Teilenummer
Kugelausrichtung
Kugelkäfige
Abstand Befestigungsbohrung - Führungswagen (Breitrichtung)(mm)
Abstand Befestigungsbohrung - Führungswagen (Längsrichtung)(mm)
Durchmesser Befestigungsbohrung - Führungswagen
Abstand Befestigungsbohrung - Schiene(mm)
Durchmesser Befestigungsbohrung - Schiene
Set / Einzelteile


Warenzeichen	THK	THK	THK	THK	THK	THK	THK	THK	THK	THK	THK	THK	THK	THK	THK	THK	THK	THK	THK	THK	THK	THK	THK	THK
Artikelserie	Miniatur-Profilschienenführungen / SRS / Wagendimensionen wählbar	Profilschienenführungen / SHS / Material wählbar / Wagendimensionen wählbar	Profilschienenführungen / HRW / Material wählbar / breiter Wagen	Profilschienenführungen / SHW / Material wählbar / breiter Wagen	Führungswagen für Profilschienen / SR / Kugelumlauf / Wagendimensionen wählbar	Profilschienenführungen / SR / Material wählbar / Wagendimensionen wählbar	Miniatur-Profilschienenführungen / SHS-Typ	Miniatur-Profilschienenführungen / SRS-G / Wagendimensionen wählbar	Profilschienenführungen / HSR / Material wählbar / Wagendimensionen wählbar	Profilschienen / HSR / Material wählbar	Führungswagen für Profilschienen / SHS / großer Wagen, Wagendimensionen wählbar	Profilschienenführungen / SSR / Material wählbar / Wagendimensionen wählbar	Profilschienen / SR	Profilschienen / HRW / Material wählbar / breite Schiene	Miniatur-Profilschienenführungen / SRS-Typ	Profilschienen / SHS	Führungswagen für Profilschienen / SSR / Wagendimensionen wählbar	Profilschienenführungen / HSR-Modell / Kugelkette	Führungswagen für Profilschienen / SHW / breiter Wagen, Wagendimensionen wählbar	Führungswagen für Profilschienen / HRW / Material wählbar / Kugelumlauf / breiter Wagen, Wagendimensionen wählbar	Führungswagen für Profilschienen / HSR / Material wählbar / Kugelumlauf / großer Wagen, Wagendimensionen wählbar	Profilschienenführungen / SR-M1-Typ	Profilschienen / SSR / Material wählbar	Profilschienenführungen / HSR-M1-Modell
CAD	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D / 3D	2D	2D / 3D	2D
ab^∗	-	-	-	-	46.67 € *Stückpreis Standardkonfiguration Mengenrabatt	-	-	-	-	-	72.04 € *Stückpreis Standardkonfiguration Mengenrabatt	-	-	- Mengenrabatt	-	-	51.04 € *Stückpreis Standardkonfiguration Mengenrabatt	-	125.20 € *Stückpreis Standardkonfiguration Mengenrabatt	104.99 € *Stückpreis Standardkonfiguration Mengenrabatt	64.07 € *Stückpreis Standardkonfiguration Mengenrabatt	-	-	-
Minimum Lieferzeit ：	14 Arbeitstage	14 Arbeitstage	14 Arbeitstage	14 Arbeitstage	5 Arbeitstage	14 Arbeitstage	7 Arbeitstage	19 Arbeitstage	14 Arbeitstage	7 Arbeitstage	5 Arbeitstage	14 Arbeitstage	7 Arbeitstage	7 Arbeitstage	7 Arbeitstage	7 Arbeitstage	5 Arbeitstage	7 Arbeitstage	5 Arbeitstage	5 Arbeitstage	5 Arbeitstage	39 Arbeitstage	7 Arbeitstage	54 Arbeitstage
Ausführung - Führungswagen	Standard / Breit / Lang	Standard / Breit	Breit	Breit	Standard / Breit	Standard / Breit / Breit Kurz	Standard / Breit	Standard / Breit	Standard / Breit	-	Standard / Breit	Standard / Breit	-	-	Breit	-	Standard / Breit	Standard	Breit	Breit	Standard / Breit	Standard / Breit / Breit Kurz	-	Standard / Breit
Ausführung - Schiene	Standard / Breit	Standard	Breit	Breit	Standard	Standard	Standard	Standard / Breit	Standard	Standard	Standard	Standard	Standard	Breit	Breit	Standard	Standard	Standard	Breit	Breit	Standard	Standard	Standard	Standard
Breite - Führungsschiene(mm)	9 ～ 42	15 ～ 63	18 ～ 120	18 ～ 90	-	15 ～ 70	15 ～ 34	9 ～ 42	15 ～ 63	15 ～ 28	-	15 ～ 34	15 ～ 34	33 ～ 42	18 ～ 42	15 ～ 23	-	15 ～ 34	-	-	-	15 ～ 34	15 ～ 34	15 ～ 28
[H] Höhe - Montage(mm)	6.5 ～ 25	24 ～ 90	12 ～ 60	12 ～ 50	-	24 ～ 85	24 ～ 55	10 ～ 25	28 ～ 90	24 ～ 42	-	24 ～ 48	24 ～ 48	17 ～ 27	12 ～ 16	24 ～ 36	-	28 ～ 55	-	-	-	24 ～ 48	24 ～ 48	24 ～ 45
Werkstoff	Rostfreier Stahl	Kohlenstoffstahl	Kohlenstoffstahl / Rostfreier Stahl	Kohlenstoffstahl / Rostfreier Stahl	Kohlenstoffstahl / Rostfreier Stahl	Kohlenstoffstahl / Rostfreier Stahl	Kohlenstoffstahl	Rostfreier Stahl	Kohlenstoffstahl / Rostfreier Stahl	-	Kohlenstoffstahl	Kohlenstoffstahl / Rostfreier Stahl	-	-	Rostfreier Stahl	-	Kohlenstoffstahl / Rostfreier Stahl	Kohlenstoffstahl	Kohlenstoffstahl	Kohlenstoffstahl / Rostfreier Stahl	Kohlenstoffstahl / Rostfreier Stahl	Rostfreier Stahl	-	Rostfreier Stahl
Anzahl Führungswagen	1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9	1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9	1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9	1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9	1	1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9	1 / 2 / 3 / 4	1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9	1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9	-	1	1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9	-	-	1	-	1	1 / 2 / 3 / 4	1	1	1	1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9	-	1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 / 9
[L] Länge - Schiene(mm)	30 ～ 2000	71 ～ 3000	38 ～ 3000	38 ～ 3000	-	47 ～ 3000	73 ～ 2920	32 ～ 2000	64 ～ 3000	73 ～ 2920	-	47 ～ 3000	73 ～ 3000	64 ～ 2920	41 ～ 430	73 ～ 2920	-	73 ～ 2920	-	-	-	47 ～ 1500	73 ～ 2920	67 ～ 1500
Vorspannung	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard	Standard
Genauigkeit	Standardklasse / Hohe Güte / Präzisionsklasse	A / Standardklasse / Hohe Güte / Präzisionsklasse / Hochpräzisionsklasse / Ultra-Präzisionsklasse	Standardklasse / Hohe Güte / Präzisionsklasse / Hochpräzisionsklasse / Ultra-Präzisionsklasse	Standardklasse / Hohe Güte / Präzisionsklasse / Hochpräzisionsklasse / Ultra-Präzisionsklasse	Standardklasse	Standardklasse / Hohe Güte / Präzisionsklasse / Hochpräzisionsklasse / Ultra-Präzisionsklasse	Standardklasse	Standardklasse / Hohe Güte / Präzisionsklasse	Standardklasse / Hohe Güte / Präzisionsklasse / Hochpräzisionsklasse / Ultra-Präzisionsklasse	Standardklasse	Standardklasse	Standardklasse / Hohe Güte / Präzisionsklasse / Hochpräzisionsklasse / Ultra-Präzisionsklasse	Standardklasse	Standardklasse	Standardklasse	Standardklasse	Standardklasse	Standardklasse	Standardklasse	Standardklasse	Standardklasse	Standardklasse / Hohe Güte / Präzisionsklasse / Hochpräzisionsklasse / Ultra-Präzisionsklasse	Standardklasse	Standardklasse / Hohe Güte / Präzisionsklasse / Hochpräzisionsklasse / Ultra-Präzisionsklasse
Nominale Teilenummer	5W ～ 25	15 ～ 65	12 ～ 60	12 ～ 50	15 ～ 35	15 ～ 70	15 ～ 35	9W ～ 25	15 ～ 65	15 ～ 30	15 ～ 35	15 ～ 35	15 ～ 35	17 ～ 27	9W ～ 15W	15 ～ 25	15 ～ 35	15 ～ 35	21 ～ 35	17 ～ 35	15 ～ 35	15 ～ 35	15 ～ 35	15 ～ 30
Kugelausrichtung	Standard	4-reihig, rund	4-reihig, rund	4-reihig, rund	4-reihig, rund	4-reihig, rund	4-reihig, rund	Standard	4-reihig, rund	-	4-reihig, rund	4-reihig, rund	-	-	Standard	-	4-reihig, rund	4-reihig, rund	4-reihig, rund	4-reihig, rund	4-reihig, rund	4-reihig, rund	-	4-reihig, rund
Kugelkäfige	Verfügbar	Verfügbar	NA	Verfügbar	NA	NA	Verfügbar	NA	NA	-	Verfügbar	Verfügbar	-	-	Verfügbar	-	Verfügbar	NA	Verfügbar	NA	NA	NA	-	NA
Abstand Befestigungsbohrung - Führungswagen (Breitrichtung)(mm)	15 ～ 45	26 ～ 142	21 ～ 180	21 ～ 144	26 ～ 82	26 ～ 90	26 ～ 72	15 ～ 45	11.5 ～ 142	-	26 ～ 72	26 ～ 60	-	-	21 ～ 45	-	26 ～ 60	26 ～ 50	31 ～ 107	29 ～ 107	26 ～ 82	26 ～ 82	-	11.5 ～ 72
Abstand Befestigungsbohrung - Führungswagen (Längsrichtung)(mm)	10 ～ 35	26 ～ 120	12 ～ 80	15 ～ 80	26 ～ 50	26 ～ 90	26 ～ 72	10 ～ 35	18 ～ 120	-	26 ～ 72	26 ～ 50	-	-	12 ～ 20	-	26 ～ 50	26 ～ 72	19 ～ 60	15 ～ 60	26 ～ 72	26 ～ 50	-	18 ～ 60
Durchmesser Befestigungsbohrung - Führungswagen	3 ～ 6	4 ～ 16	3 ～ 10.5	2.5 ～ 10	4 ～ 9	4 ～ 16	4 ～ 8.5	3 ～ 6	4 ～ 16	-	4 ～ 8.5	4 ～ 8	-	-	3 ～ 4	-	4 ～ 8	4 ～ 8	4.4 ～ 8	3.3 ～ 8	4 ～ 10	4 ～ 9	-	4 ～ 10
Abstand Befestigungsbohrung - Schiene(mm)	20 ～ 60	60 ～ 150	40 ～ 105	40 ～ 80	60 ～ 80	60 ～ 150	60 ～ 80	20 ～ 60	60 ～ 150	60 ～ 80	60 ～ 80	60 ～ 80	60 ～ 80	40 ～ 60	30 ～ 40	60	60 ～ 80	60 ～ 80	50 ～ 80	40 ～ 80	60 ～ 80	60 ～ 80	60 ～ 80	60 ～ 80
Durchmesser Befestigungsbohrung - Schiene	3 ～ 7	4.5 ～ 18	4.5 ～ 11	4.5 ～ 9	3.5 ～ 9	3.5 ～ 18	4.5 ～ 9	3.5 ～ 7	4.5 ～ 18	4.5 ～ 9	4.5 ～ 9	4.5 ～ 9	3.5 ～ 9	4.5	3.5 ～ 4.5	4.5 ～ 7	4.5 ～ 9	4.5 ～ 9	4.5 ～ 7	4.5 ～ 7	4.5 ～ 9	3.5 ～ 9	4.5 ～ 9	4.5 ～ 9
Set / Einzelteile	Set	Set	Set	Set	nur Führungswagen	Set	Set	Set	Set	Nur Führungsschiene	nur Führungswagen	Set	Nur Führungsschiene	Nur Führungsschiene	Set	Nur Führungsschiene	nur Führungswagen	Set	nur Führungswagen	nur Führungswagen	nur Führungswagen	Set	Nur Führungsschiene	Set

Filtern nach:

Suchergebnisse durch Auswahl der Spez./Maße einschränken

Ausführung - Schiene
- Standard
- Breit
Bild vergrößern

Zurücksetzen

Breite - Führungsschiene(mm)
5

7

9

10

12

14

15

18

20

23

24

25

28

30

33

34

37

42

44

45

47

48

52

53

54

59

60

63

68

69

70

71

73

80

86

90

100

120

126

140

142

162

170

250
Zurücksetzen

[H] Höhe - Montage(mm)
6

6.5

8

9

10

12

12,9

13

14

15

16

17

18

18,7

20

21

21,7

22,3

23,5

24

25

27

28

29,7

30

31

33

34,2

35

36

37,2

38

40

41,5

42

44

45

48

50

52

53,8

55

60

70

80

85

90

100

120
Zeichnung

Zurücksetzen

Werkstoff
- Kohlenstoffstahl
- Rostfreier Stahl
Bei Druckstück sind Führungswagen und Schiene aus demselben Werkstoff.

Zurücksetzen

Anzahl Führungswagen
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
Zurücksetzen

[L] Länge - Schiene(mm)
25

35

40

45

50

55

70

75

80

85

95

100

110

115

120

130

135

140

145

150

155

160

165

170

175

190

195

200

205

215

220

230

235

240

245

250

255

260

265

270

275

280

290

295

310

315

320

335

340

345

350

355

360

370

375

390

395

400

415

420

430

435

440

445

455

460

470

475

495

510

515

520

535

545

550

555

560

570

575

580

590

595

600

615

620

630

635

640

645

670

680

695

700

710

720

745

750

760

770

790

795

800

820

830

840

845

870

880

895

910

920

940

945

950

970

990

1000

1040

1060

1080

1120

1160

1180

1200

1240

1300

1320

1360

1400

1420

1440

1480

1520

1540

1560

1600

1640

1660

1720

1780

1800

1840

1880

1900

1960

2000
[30-3000/1mmTeile]
Zeichnung

Zurücksetzen

Vorspannung
- Standard
- Leichte Vorspannung
- Mittlere Vorspannung
- Spiel
- Schwere Vorspannung
Schlagen Sie in den Genauigkeitsstandards des jeweiligen Herstellers nach.

Zurücksetzen

Genauigkeit
- Standardklasse
- Hohe Güte
- Präzisionsklasse
- Hochpräzisionsklasse
- Ultra-Präzisionsklasse
Schlagen Sie in den Genauigkeitsstandards des jeweiligen Herstellers nach.

Zurücksetzen

Nominale Teilenummer
5

5W

7

7W

9

9W

9X

9/M3

12

12W

14

15

15W

17

18

20

21

24

25

27

30

35

42

45

50

55

60

65

70
Zurücksetzen

Kugelausrichtung
- Standard
- 4-reihig, rund
- 4-reihig gotisch
Bilder

Zurücksetzen

Kugelkäfige
- NA
- Verfügbar
Zurücksetzen

Abstand Befestigungsbohrung - Führungswagen (Breitrichtung)(mm)
11.5

12

15

16

19

20

21

23

25

26

28

29

30

31

32

35

38

40

41

45

46

49

50

53

57

60

70

72

75

76

82

90

100

107

116

142

144

180
Zurücksetzen

Abstand Befestigungsbohrung - Führungswagen (Längsrichtung)(mm)
10

11

12

13

15

16

17

18

19

20

24

25

26

28

29

30

32

34

35

36

40

43

45

50

52

55

60

62

65

70

72

75

80

85

90

95

110

120
Zurücksetzen

Durchmesser Befestigungsbohrung - Führungswagen
2

2.5

3

3.3

4

4.4

4.5

5

5.3

5.4

5.5

6

6.8

7

8

8.5

8.6

9

10

10.5

11

12

12.5

14

14.5

16
Zurücksetzen

Abstand Befestigungsbohrung - Schiene(mm)
15

20

25

30

40

50

60

80

105

120

150
Zurücksetzen

Durchmesser Befestigungsbohrung - Schiene
2.4

3

3.5

4.5

6

7

9

11

14

16

18
Zurücksetzen

Set / Einzelteile
- Set
- nur Führungswagen
- Nur Führungsschiene
Zurücksetzen

Suchergebnisse durch Herstellerauswahl einschränken

- MISUMI (0)
- Kostengünstige Artikel ()
- THK (24)
- SBC (6)
- BOSCH REXROTH (2)
- OZAK (0)
- IKO (0)
- INA (0)
- SKF (0)
- GANTER (0)
- NORELEM (0)
- SCHNEEBERGER (0)
Zurücksetzen

Suchergebnisse durch Auswahl des CAD-Formats einschränken

- 2D
- 3D
Zurücksetzen

Eingeschränkte Suche durch Präzisierung der Lieferzeit

Alle Produkte

Versand am selben Tag

4 Tage oder weniger

5 Tage oder weniger

6 Tage oder weniger

7 Tage oder weniger

8 Tage oder weniger

9 Tage oder weniger

10 Tage oder weniger

11 Tage oder weniger

12 Tage oder weniger
Zurücksetzen