Strahlenteiler

?* Informationen zur Lieferzeit

• 

  Nicht-polarisierter Strahlteiler für Laserlinie

  SURUGA SEIKI

  [Features]
  · A non-polarizing beam splitter that corresponds to a specific laser wavelength. Splits the amount of transmitted and reflected light at a ratio of 1: 1.
  · The amount of transmitted and reflected light will not change, even if the laser beam's polarization direction does.
  · Cannot be used with high-output lasers since the polarizing film only has a maximum absorption of 10%.
  · The phase contrast​of the S-polarized light and P-polarized light for the transmitted and reflected light are not guaranteed.

  ab∗ ：	247.21 €
  Minimum Lieferzeit ：	43 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Strahlteilerplatten

  SURUGA SEIKI

  [Features]
  · A mirror that splits light entered at 45° into reflected light and transmitted light. The mirror features flat-parallel plates with a chrome film or dielectric multi-layered film coating.
  · A type that is generally called a "half-mirror."
  · In order to make the transmitted and reflected light amounts 1: 1 using this element, the polarization state of the entered light must be circularly polarized, non-polarized, or linearly polarized at 45°.
  · This is because there is a difference between the reflectance (or transmittance) of the P polarization component and the S polarization component.

  ab∗ ：	92.22 €
  Minimum Lieferzeit ：	33 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Polarisierter Strahlteiler für Laserleitung

  SURUGA SEIKI

  [Features]
  · A high performance polarizing beam splitter that corresponds to specific laser wavelengths.
  · Can split circularly polarized light or linearly polarized light at 45° into linearly polarized lights of P and S.
  · The beam position will not shift as it is a cube type.
  · The P polarization component passes through the inclined surface while the S polarization component is reflected on the inclined surface.
  · A dielectric is used for the polarizing film, achieving polarization splitting with no loss from the film.

  ab∗ ：	247.21 €
  Minimum Lieferzeit ：	43 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Breitband-Polarisation-Strahlenteiler

  SURUGA SEIKI

  Can split circularly polarized light or linearly polarized light at 45° into linearly polarized lights of P and S. The beam position will not shift as it is a cube type.
  
  [Features]
  · Does not suffer beam-shifts due to splitting as it is a cube type. The P polarization component passes through the inclined surface while the S polarization component is reflected on the inclined surface.
  · A dielectric multi-layered film is used to provide polarization splitting over a wide range of wavelengths.
  · Ideal for experiments that share two or three wavelengths.

  ab∗ ：	190.85 €
  Minimum Lieferzeit ：	33 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Breitbandige Nicht-polarisierte Strahlteiler

  SURUGA SEIKI

  [Features]
  · A cube-type beam splitter that separates the amount of transmitted and reflected light at a ratio of 1: 1.
  · Uses a hybrid (metal/dielectric) coating to achieve a non-polarized broadband over a wide range.
  · Ideal for experiments that share two or three wavelengths.
  · The amount of transmitted and reflected light (at a 1: 1 ratio) will not change, even if the laser beam's polarization direction does. Cannot be used with high energy-use lasers as it has a maximum absorption of 10%.
  · The phase contrast​of the S-polarized light and P-polarized light for the transmitted and reflected light are not guaranteed.

  ab∗ ：	169.72 €
  Minimum Lieferzeit ：	43 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...