Kettenspanner (für Laufräder)

?* Informationen zur Lieferzeit

• 

  Kettenspanner

  MISUMI

  CAD ：

  2D / 3D

  Minimum Lieferzeit ：	7 Arbeitstage

• 

  Kettenspanner

  MISUMI

  CAD ：

  2D / 3D

  Minimum Lieferzeit ：	5 Arbeitstage

• 

  Spanneinheit mit einem Laufrad

  MISUMI

  CAD ：

  2D / 3D

  Minimum Lieferzeit ：	7 Arbeitstage

• 

  Kettenspanner/Mit Spannrädern

  MISUMI

  • Mengenrabatt

  CAD ：

  2D / 3D

  ab∗ ：	42.00 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Schraubenjustierungsspanner (SAT)

  IMAO CORPORATION

  Tension can be easily adjusted with a hex wrench. Has a large stroke and powerful tension.
  
  [Features]
  · Has a large stroke and powerful tension.
  · AST-1 Mount direction can be changed with a bracket

  CAD ：

  2D / 3D

  ab∗ ：	88.37 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Festziehvorrichtung TM-Serie Spanner mit automatischer Spannungseinstellungsmechanismus (TMB)

  KATAYAMA CHAIN

  The KANA tight master is a type that uses built-in springs to tighten automatically. Comes with standard idler.
  
  [Features]
  · Chain extension induces reduction of transmission efficiency.
  · Also, chain and sprocket wear is hastened to shorten life.
  · The KANA Tight master is a type that uses built-in springs to tighten automatically. Comes with standard idler

  CAD ：

  2D / 3D

  ab∗ ：	64.47 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Ständer Schraubenschlüssel ST-R

  KONISHI MFG

  Tension support base. Type that can be adjusted to the optimal position if the serration bolt is loosened. 2 types of stand spanner with different shaft heights are available. 2 types of idler bolt length are also available.

  CAD ：

  2D

  ab∗ ：	64.06 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Ständer Schraubenschlüssel ST-S

  KONISHI MFG

  Tension support base. 2 types of stand spanner with different shaft heights are available. 2 types of idler bolt length are also available. The spanner and idler combination set product is super-convenient.

  CAD ：

  2D

  ab∗ ：	25.27 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flachschlüssel FLR

  KONISHI MFG

  Tension support base. Type that can be adjusted to the optimal position if the serration bolt is loosened. 2 types of idler bolt length are also available.

  CAD ：

  2D

  ab∗ ：	62.93 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Seitliche Spannplatte

  MISUMI

  • Mengenrabatt

  CAD ：

  2D / 3D

  ab∗ ：	17.70 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Flex-Halter YSA

  NABEYA BI-TECH

  [Features]
  · Uses Neidhardt rubber springs for unique non-linear spring characteristics.
  · Automatically adjusts belt tension.
  · The rubber spring part and the driver mounting arm can be assembled in any of four directions.
  · Also, the rubber spring part can be adjusted while still fixed to machinery.
  · Maximum allowable twist angle is ±30°.
  · The operating temperature range is from -42°C to +85°C.
  · The material and finishing are: SS400 and bright chromate plating for the main body, and the rubber is NR.

  CAD ：

  2D / 3D

  ab∗ ：	29.33 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Flex-Halter YSB

  NABEYA BI-TECH

  [Features]
  · Uses Neidhardt rubber springs for unique non-linear spring characteristics.
  · Automatically adjusts belt tension.
  · Can be easily mounted with 1 bolt (included).
  · Rotates 360°, and the position of the idler can be freely adjusted.
  · Maximum allowable twist angle is ±32°.
  · The operating temperature range is from -42°C to +85°C.
  · Material and finishing: Steel, trivalent chromate processing.

  CAD ：

  2D / 3D

  ab∗ ：	50.07 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Enge Halter THB-Serie

  KATAYAMA CHAIN

  [Features]
  · Chain tensioner that can be easily and dramatically adjusted by using an eccentric pin.
  · Use of tight holder to increase chain transmission efficiency and chain life is also recommended.

  CAD ：

  2D / 3D

  ab∗ ：	40.50 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Leitungshalter YAB

  NABEYA BI-TECH

  Made from FC200, with electrostatic paint coating (black).

  CAD ：

  2D / 3D

  ab∗ ：	20.93 €
  Minimum Lieferzeit ：	auf Anfrage

  *Stückpreis Standardkonfiguration

• 

  Halterung für Flex-Halter YSBM

  NABEYA BI-TECH

  [Features]
  · Dedicated mount for flex holders.
  · Material and finishing: Steel, trivalent chromate processing

  CAD ：

  2D / 3D

  ab∗ ：	19.67 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Gerade Spanner, Kurbelspanner (SRT/CRT)

  IMAO CORPORATION

  Simple tightener in straight or crank shape.

  CAD ：

  2D / 3D

  ab∗ ：	12.59 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Aluminium-Schraubenschlüssel AL-1

  KONISHI MFG

  Tension support base made from aluminum. 2 types of idler bolt length are available.

  CAD ：

  2D

  ab∗ ：	29.98 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Enge Halter THB-Serie L-Modell-Befestigung

  KATAYAMA CHAIN

  Dedicated L type attachment for tight holder THB series. Common to all model numbers. Set product that includes an L type attachment is also available.
  
  [Features]
  · Chain tensioner that can be easily and dramatically adjusted by using an eccentric pin.
  · Use of tight holder to increase chain transmission efficiency and chain life is also recommended

  CAD ：

  2D / 3D

  ab∗ ：	8.22 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Enge Halter THB-Serie Platzhalter

  KATAYAMA CHAIN

  Dedicated spacer for the tight holder, THB series. Common to all model numbers. Set product that includes a spacer is also available.
  
  [Features]
  · Chain tensioner that can be easily and dramatically adjusted by using an eccentric pin.
  · Use of tight holder to increase chain transmission efficiency and chain life is also recommended

  CAD ：

  2D / 3D

  ab∗ ：	6.50 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Seitenhalter YFS

  NABEYA BI-TECH

  Made from FC200, with electrostatic paint coating (black).

  CAD ：

  2D / 3D

  ab∗ ：	21.21 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Gleithalter YAC

  NABEYA BI-TECH

  Made from AC4B.

  CAD ：

  2D / 3D

  ab∗ ：	36.54 €
  Minimum Lieferzeit ：	34 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Basishalterung YFB

  NABEYA BI-TECH

  Made from FC200, with electrostatic paint coating (black).

  CAD ：

  2D / 3D

  ab∗ ：	25.05 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Aluminium-Schraubenschlüssel AL-2

  KONISHI MFG

  Tension support base made from aluminum. 2 types of idler bolt length are available.

  CAD ：

  2D

  ab∗ ：	29.27 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flachschlüssel FLS

  KONISHI MFG

  Tension support base. 2 types of idler bolt length are available.

  CAD ：

  2D

  ab∗ ：	18.17 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...