Leitfähige Elastomerprodukte / Schaumstoffprodukte

?* Informationen zur Lieferzeit

• 

  Gummifuß/Elektrisch leitfähig【1-24 Stk. pro Packung】

  MISUMI

  • Mengenrabatt

  CAD ：

  2D / 3D

  ab∗ ：	10.00 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Antistatische Gummiplatten

  MISUMI

  CAD ：

  2D / 3D

  Minimum Lieferzeit ：	5 Arbeitstage

• 

  Erdungsbürsten

  MISUMI

  CAD ：

  2D / 3D

  Minimum Lieferzeit ：	5 Arbeitstage

• 

  Schaumstoffbänder

  MISUMI

  • Mengenrabatt

  CAD ：

  2D / 3D

  Minimum Lieferzeit ：	Versand am selben Tag

• 

  Leitfähige Gummifüße mit Hülse【4-16 Stk. pro Packung】

  MISUMI

  • Mengenrabatt

  CAD ：

  2D / 3D

  ab∗ ：	15.00 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Antistatische Gummimatte Shinon-Stat

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.
  
  [Features]
  · Sinonstat is a semi-hard mat made from a special mix of conductive materials. It consists of two layers: an anti-static color layer and a black conductive layer.
  · Highly heat-resistant. Melted solder will not eat through it, ensuring security during soldering work.
  · Sinonstat mats will not flake off powder or peel off, so you can use them with confidence in clean rooms.
  · [Product Warning] The product features hard surfaces and easily curls on all four sides. When using, lay it out for at least 24 hours, then fix in place with double-sided tape.
  · Sinonstat's performance

  • Mengenrabatt

  ab∗ ：	16.47 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Polyethylen-Schaumstoff für antistatische Anwendungen

  MISUMI

  CAD ：

  2D / 3D

  Minimum Lieferzeit ：	5 Arbeitstage

• 

  Antistatische Kautschukplatten/Platte/Rollen-Ausführung

  MISUMI

  • Mengenrabatt

  CAD ：

  2D / 3D

  Minimum Lieferzeit ：	3 Arbeitstage

• 

  Antistatische Schaumstoffplatten/Polyethylenschaum

  MISUMI

  CAD ：

  2D / 3D

  Minimum Lieferzeit ：	5 Arbeitstage

• 

  Gummifußsaugnäpfe

  MISUMI

  • Mengenrabatt

  CAD ：

  2D / 3D

  ab∗ ：	2.60 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Erdungsbänder

  MISUMI

  CAD ：

  2D / 3D

  Minimum Lieferzeit ：	5 Arbeitstage

• 

  Kupferfolie/Band

  MISUMI

  • Mengenrabatt

  CAD ：

  2D / 3D

  ab∗ ：	47.30 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Erdungsmatten

  MISUMI

  • Mengenrabatt

  CAD ：

  2D / 3D

  ab∗ ：	13.00 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  PCB-Rack Platte【10 Stk. pro Packung】

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.
  
  [Features]
  · This PCB rack sheet is a guide developed for print circuit board storage racks.
  · Everything is conductive and the surfaces maintain resistances of 104 to 108 Ω/□.
  · May be mounted as necessary for your application.
  · Three types of guide sheets are available. L type: Conductive PS; PP type: Conductive PP; MG type: Conductive heat-resistant resin

  • Mengenrabatt

  CAD ：

  2D

  ab∗ ：	33.05 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  PLG-Halterung

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.
  
  [Features]
  · The PKG holder is a basic rack for holding and storing print circuit boards.
  · Features grooves of differing widths on the front and rear surfaces, letting you place any type of print circuit board inside.
  · Uses fully conductive materials for assembling mounted boards, examination, storage, etc. (Surface resistance: 104 to 108 Ω/□)
  · Uses conductive PP materials for superior chemical resistance.
  · Useful for temporary print circuit board storage during assembly or examination.

  • Mengenrabatt

  CAD ：

  2D

  ab∗ ：	37.11 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Magazin-Rack für Einsetzmaschinen / Aufnahme Magazin-Rack PDBOX

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.
  
  [Features]
  · A standard magazine rack for insertion machines.
  · Supports surface chip mounting.
  · Used in a wide variety of areas, from automatic insertion to circuit board storage and transport.
  · ED-2504M7is a new kind of magazine rack with an adjustable width that can be adjusted with just one touch.
  · heat-resistant type (supports circuit board temperatures up to 130°C) is our standard product.
  · ED-9500NHIs a large magazine rack with sufficient heat resistance (supports circuit board temperatures up to 140°C) to be used for face installation (chip mounting).
  · width adjuster lets you loosen two screws on the top to freely and easily change widths
  · Surface resistance is semi-permanently maintained at 104 to 108 Ω/□ for all types.

  • Mengenrabatt

  CAD ：

  2D

  ab∗ ：	87.60 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rack für Logistik / Racktainer

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.
  
  [Features]
  · A grooved print circuit board storage unit featuring an integrated rack and plastic container for transport.
  · An adjustable cassette-insertion system eliminates annoying width adjustments.
  · Guide plates and containers are made of conductive plastic for light weight and excellent durability.
  · Can be stacked up for convenience and space saving.
  · Use the dedicated locking lid (sold separately) with the container type to keep the inside airtight, helping prevent dust, etc. during transport.
  · Widths can be adjusted at a 4 mm pitch, and the grooves are 5 mm deep

  • Mengenrabatt

  CAD ：

  2D

  ab∗ ：	149.17 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Zahnstangenführungsplatte für sehr hohe Temperaturbeständigkeit Prozesse

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.

  • Mengenrabatt

  CAD ：

  2D

  ab∗ ：	33.36 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rack für sehr hohe Temperaturbeständigkeit Prozesse

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.

  CAD ：

  2D

  ab∗ ：	31.29 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Antistatisches, transparentes Zeichenetui

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.
  
  [Features]
  · The drawing case was developed to create an environment that doesn't cause static electricity interference in clean rooms and work areas, keeping electronic parts safe if they make contact with it.
  · The card-case type is sealed on three surfaces for hard durability.
  · The clear-file type is sealed on two surfaces

  • Mengenrabatt

  ab∗ ：	20.18 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Leitfähige Gehäuseteile

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.
  
  [Features]
  · Useful for storing semiconductors and other electronic parts, substrates, IC cards, LCD panels, etc.
  · Everything is conductive and the surfaces maintain resistances of 104 to 107 Ω/□

  • Mengenrabatt

  CAD ：

  2D

  ab∗ ：	3.96 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rack für Logistik / Racktainer (Spezielle Abdeckung)

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.
  
  [Features]
  · A grooved print circuit board storage unit featuring an integrated rack and plastic container for transport.
  · An adjustable cassette-insertion system eliminates annoying width adjustments.
  · Guide plates and containers are made of conductive plastic for light weight and excellent durability.
  · Can be stacked up for convenience and space saving.
  · Use the dedicated locking lid (sold separately) with the container type to keep the inside airtight, helping prevent dust, etc. during transport.
  · Widths can be adjusted at a 4 mm pitch, and the grooves are 5 mm deep, letting you store most kinds of circuit boards.
  · The N type features long (155 mm) grooves for improved storability

  ab∗ ：	51.71 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rack für Logistik / Racktainer (Trenner)

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.
  
  [Features]
  · A grooved print circuit board storage unit featuring an integrated rack and plastic container for transport.
  · An adjustable cassette-insertion system eliminates annoying width adjustments.
  · Guide plates and containers are made of conductive plastic for light weight and excellent durability.
  · Can be stacked up for convenience and space saving.
  · Use the dedicated locking lid (sold separately) with the container type to keep the inside airtight, helping prevent dust, etc. during transport.
  · Widths can be adjusted at a 4 mm pitch, and the grooves are 5 mm deep, letting you store most kinds of circuit boards.
  · The N type features long (155 mm) grooves for improved storability

  • Mengenrabatt

  ab∗ ：	59.69 €
  Minimum Lieferzeit ：	11 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  L-förmiges Gestell für den Tischgebrauch, EL-Gestell

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.
  
  [Features]
  · The EL rack is a basic L-type circuit board holder suited for relatively large boards.
  · Shallow (3 mm) grooves ensure board components won't butt against the rack, even if there is little empty space on the edges.
  · Sturdy construction supports loads up to 30 kg.
  · Uses conductive PP materials for superior chemical resistance.
  · Surface resistance maintained at 104 to 108Ω/□.

  • Mengenrabatt

  CAD ：

  2D

  ab∗ ：	38.57 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  L-förmiges Gestell für den Tischgebrauch, SGL-Gestell

  COCO SHINON

  Note: The CAD data for this series is being revised. The data will be available as soon as modifications are completed.
  
  [Features]
  · The SGL rack is a basic L-shaped circuit board holder.
  · The grooves are relatively deep at 5 mm, keeping boards safely in place for storage.
  · The heat-resistant type uses carbon fiber, which provides durability and eliminates powder dropping, so you can use it with confidence in clean rooms.
  · Surface resistance maintained at 104 to 108 Ω/

  • Mengenrabatt

  CAD ：

  2D

  ab∗ ：	23.01 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Leitfähiges Abdeckband C-300-MCU-M

  TAKIGEN

  Washer-type conductive masking tape.

  ab∗ ：	5.60 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  TRUSTAT leitfähige Dichtungsbahn, SCS SAS-Serie

  SIMCO JAPAN

  A long, conductive sheet with excellent electric properties and durability (use the dedicated grounding kit with IMΩ resistors for grounding)

  ab∗ ：	43.03 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...