Lieferzeit |
|
---|
?* Informationen zur Lieferzeit
Edelstahl Dünnen, flacher Schwenkhebel A-1464
TAKIGEN
[Features]
· Waterproof type (using O ring and sheet packing).
· A new reversible key with a dust proof shutter with excellent operability, TAK60 is standard equipment (A-464-L-TAK60).
· Panel drilling dimensions are compatible with A-160· A-240 series, etc.
· Left/right combination type (exchange left and right by turning over the cam)
ab∗ : | 95.51 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 42.08 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
Schmaler Flachschwenkhebel A-446
TAKIGEN
[Features]
· Conforms to Cabinet Industry Association (CA-G02) "Handle quality demands" (A-446).
· Thin type with a depth of 12.5 mm from the mounting surface to the stopper.
· Flat handle A-160· A-240 series panel drilling dimensions can also be installed.
· Waterproof type (using O ring and sheet packing).
· Left /right combination type (exchange left and right by turning over the cam)
ab∗ : | 10.55 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Edelstahl Flachschwenkhebel A-1475
TAKIGEN
[Features]
· Fire resistant, heat resistant, salt resistant and acid resistant (A-1475).
· The handle and stopper are directly connected and can be forcibly rotated, and there is no malfunction due to the distortion of the housing.
· Stainless steel flush handle is compatible with A-1260 for installation.
· Left and right hand use (you can exchange left and right by turning the stopper over)
ab∗ : | 91.24 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Wasserdichter Flachgriff mit erzwungener Auslassfunktion, A-481-N
TAKIGEN
Mechanism for forcing the handle to be pushed out by pushing the button strongly.
Waterproof type (using O ring, sheet packing) Left/right combination type (exchange left and right by turning over the cam and stopper)
ab∗ : | 26.18 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Plastikabdeckung für Modell A-464, A-464-PC
TAKIGEN
[Features]
· Compatible with A-464 series.
· Install on 464 series to improve corrosion resistance and dust prevention (IP × 3)
ab∗ : | 5.48 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
Wasserdichte Dichtung für A-464, A-464-WP
TAKIGEN
[Features]
· Optimum packing for outdoor / waterproof specifications.
· "Fins" on the outer circumference and "ribs" inside prevent water from getting in.
· Replace the standard packing and install it
ab∗ : | 2.35 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
Kautschukkappe für A-481, A-481-RC
TAKIGEN
[Features]
· Protects the handle, improves dust resistance and corrosion resistance.
· A-481-RC-4N is a bag shape.
· EPDM is suitable for outdoor use because it is made of durable and weather resistant material
ab∗ : | 8.46 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· No caulking, etc. is required on the handle mounting part when the handle is attached to the outside of the packing.
· Install the handle outside the sealing area, and effectively use the space inside the cabinet.
· Large stroke (32 mm) can be obtained with a slim body.
· Even if the size of the housing changes, it is not necessary to change the length of the rod.
· For rod seat, the recommended hinge B-71-3 is compatible with installation.
· Panel drilling of the handle is also vertically symmetrical, so design of the housing can be done easily (no need to select door arbitrarily).
· A new reversible key with a dust proof shutter with excellent operability, TAK60 is standard equipment. (A-462-1-1-TAK60).
· For right / for left / with keys / without keys
ab∗ : | 79.79 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· 3 point tightening mechanism developed for the outside system.
· No caulking, etc. required on the mounting part for attaching the handle to the outside of the packing.
· Large stroke can be obtained with a slim body.
· Upper and lower rod ends use plastic rollers, and the operation is smooth.
· For rod seat, recommended hinge B-71-3 is compatible with installation.
· Therefore, we do not choose right or left side use of the door (panel cut is also vertically symmetrical). Even if the size of the housing changes, it is not necessary to change the length of the rod.
· Small and slim pin tumbler lock with high security is used.
· Left/right combination type (exchange left and right by turning over the control center)
ab∗ : | 84.75 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
Automatik-Verschluss Spülgriff (Zylinderverschluss-Model) A-480-A
TAKIGEN
[Features]
· Includes new, easy to operate, reversible TAK60 key and dust-proof shutter as standard equipment.
· One-touch mechanism (open and lock).
· Waterproof type (using O ring and sheet packing).
· Lock has a dust proof shutter.
· Left/right combination type (exchange left and right by turning over the cam).
ab∗ : | 39.50 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Eingelassener Griff für Getriebe A-248
TAKIGEN
[Features]
· Lock comes standard with the TAK60, a new type of reversible key with an easy to use dust-proof shutter (A-248-1-TAK60).
· Slim body, ideal for a cabinet with a small installation space.
· Waterproof type (using O ring and sheet packing).
· Fix the door tightly with ø4 bar rod.
· Quick bush is used for installation of bar rod with one touch.
· For right side
ab∗ : | 31.58 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
Rostfreier Edelstahl Bündige Griffleiste mit automatischer Verriegelung A-1480
TAKIGEN
[Features]
· Lock comes standard with the TAK60, a new type of reversible key with an easy to use dust-proof shutter (A-1480-TAK60).
· Made of stainless steel, corrosion resistant.
· Waterproof type (using O ring and sheet packing).
· Waterproof standard IP x 3 compatible.
· Left/right combination type (exchange left and right by turning over the cam)
ab∗ : | 139.43 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· Resin mold cover attached to the back surface to improve waterproofness.
· (A-1970-A-2WP).
· Temporary fixation can be done with a dedicated mounting plate, which improves workability.
· (A-1970-A-2WP).
· Made of stainless steel, corrosion resistant.
· The handle and stopper are directly connected and can be forcibly rotated, and there is no malfunction due to distortion of the housing.
· Press manufactured to be lightweight.
· Left and right dual use (the standard product is set for right hand opening. Please inquire when using for left opening).
ab∗ : | 48.89 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Wasserdichter Edelstahl-Flachgriff mit Zwangs- Extrusionsfunktion, A-1481-F
TAKIGEN
[Features]
· A new reversible key with a dust proof shutter with excellent operability, TAK60 is standard equipment (A-1481-F / A-481-F) The mechanism used for forcibly pushing the handle out is activated by pressing the button strongly.
· Manufactured by Nitto K.K. H-83/84/86 and panel drilling are compatible.
· Waterproof type (using O ring and sheet packing).
· Left/right combination type (exchange left and right by turning over the cam)
ab∗ : | 90.74 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Wasserdichter Edelstahl-Flachgriff mit Zwangs- Extrusionfunktion, A-1481-N
TAKIGEN
[Features]
· The mechanism used for forcibly pushing the handle out is activated by pressing the button strongly.
· Manufactured by Nitto K.K. H-83/84/86 and panel drilling are compatible.
· Waterproof type (using O ring / sheet packing)· Left/right combination type (exchange left and right by turning over the cam and stopper
ab∗ : | 90.25 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Edelstahl Griffmuschel für Vorhängeschloss A-1464-1-PDL
TAKIGEN
[Features]
· Can be locked with a padlock (cord diameter ø6).
· The part where the padlock is hung is on the handle lever side, and does not interfere with operation.
· A-1461-1 can be installed with the same panel cuts.
· Depth to the stopper is 12.5 mm, and the space inside the enclosure can be effectively used.
· Left/right combination type (exchange left and right by turning over the cam)
ab∗ : | 90.13 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 90.13 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Stainless Steel dünner wasserdichter Flachgriff A-1494
TAKIGEN
[Features]
· Ultra thin type with a depth of 13 to 22 mm from the mounting surface to the stopper.
· Waterproof type (using O ring and sheet packing).
· Improved rust prevention satellite chrome plating (25 μm).
· Fire resistant, heat resistant, saltwater resistant and acid resistant.
· Left/right combination type (exchange left and right by turning over the cam).
· A new reversible key with a dust proof shutter with excellent operability, TAK60 is standard equipment
ab∗ : | 94.76 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Wasserdichter Edelstahl-Flachgriff A-1465-C
TAKIGEN
[Features]
· The lock comes standard with the TAK60, a new style of reversible key with easy to use dust-proof shutter (A-1465-C and A-465-F).
· Flat handle A-160· A-240 series panel drilling dimensions can also be installed.
· Left and right combination
ab∗ : | 95.51 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 76.08 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 134.95 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
Messuhr-Sperre Flachgriff A-464-DL
TAKIGEN
[Features]
· Unlock by merely matching the code number of the code (dial), with no need to manage subordinate keys.
· High security lock TAK built-in series that can be unlocked with a key.
· Effective for individual system and master system with integrated administrator.
· Code is 4 digits from 0 to 9, and 10,000 combinations are possible.
· Change of PIN number can be done with one lever operation easily.
· A-160-1 A-240-1· A-464-1, etc. are compatible for installation.
· For both left hand and right hand use
ab∗ : | 87.22 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 14.43 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Schwenkhebel mit Kunststoff-Staubschutzkappe AP-493
TAKIGEN
[Features]
· Dust proof cap is provided as standard equipment to protect the lock from rainwater and dust.
· Uses convex packing of soft rubber molding. Improved adhesion.
· Temporary fixing boss is provided on the mounting plate, and workability has improved.
· The lock includes a new reversible key TAK60, with a dust-proof shutter with excellent operability as standard equipment.
· Panel drilling dimensions are compatible with A-160· A-240 series.
· Left /right combination type (exchange left and right by turning over the cam)
ab∗ : | 19.21 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· Japan Vending Machine Industry Association standard product locks can be incorporated.
· Double safety mechanism of tightening plus locking.
· Standard lock uses a personal coin lock (C-288).
· Optional 3 point electric lock can be attached (when the handle is forcibly unlocked, solenoids on the top and bottom of the door work, locking the door)
ab∗ : | 55.07 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· Japan Vending Machine Industry Association standard product locks can be incorporated.
· Waterproof type (using O ring / packing).
· Protrusion from the panel mounting surface is 4 mm, making it a flat type.
· The key can be removed only when locking so that lock is ensured.
· Standard lock uses a dedicated thin cylinder (C-288-G).
· Left / right dual use type (you can exchange the left and right by turning over the cam)
ab∗ : | 51.36 € |
---|---|
Minimum Lieferzeit : | 24 Arbeitstage |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· Waterproof type (using O-ring and packing).
· Protrusion from the panel mounting surface is 4 mm, and there is 40 mm till the stopper in this thin type.
· Left and right hand use (you can exchange left and right by turning the cam over).
· Standard lock, dedicated small cylinder (C-288-H) is used.
· Since the key will leave the lock only at the time of locking, there is no forgetting to lock
ab∗ : | 43.94 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· Waterproof type (using O-ring and packing).
· Protrusion from the panel mounting surface is 4 mm, and there is 40 mm till the stopper in this thin type.
· Left and right hand use (you can exchange left and right by turning the cam over).
· Standard lock, dedicated small cylinder (C-288-H) is used.
· Since the key will leave the lock only at the time of locking, there is no forgetting to lock
ab∗ : | 43.94 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
Kunststoff-Multiverschluss Flachgriff AP-469-W
TAKIGEN
[Features]
· 2 locks are built-in and it supports various security systems.
· Master lock specification: can be released with either lever side cylinder or case side cylinder.
· Set lever side cylinder to different key, and by setting the case side cylinder to the same key, you can manage and operate like a master key.
· Double lock specification: The handle lever can not be released unless you unlock both the lever side cylinder and the case side cylinder.
· Both sides are aligned, and for the first time there is a specification to enable cancel (operation).
· Note: various customized combinations can be made according to request, such as making the same key (stop number) on one side, different key on both sides, etc.
ab∗ : | 27.86 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
Wasserdichter Flachgriff mit Stabsteuerung AC-100-E
TAKIGEN
[Features]
· Rod bar is attached straight.
· Determine the center without bend processing.
· A new reversible key with a dust proof shutter with excellent operability, TAK60 is standard equipment. (AC-100-E-TAK60).
· Easy to handle swing handle type.
· 3 point tightening corresponding with stopper.
· Improved rust prevention satellite chrome plating (25 μm).
· Waterproof type (using O ring and sheet packing).
· Left and right hand dual use (exchange left and right by turning over the control center)
ab∗ : | 72.38 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· The lock comes standard with TAK60, a new kind reversible key with an easy to use dust-proof shutter (A-303-TAK60).
· Waterproof type (using O ring / packing).
· Since it is one-touch lock system, there is no forgetting to lock (with key), for left and right dual use
ab∗ : | 39.35 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Wasserdichter Flachgriff mit erzwungener Auslassfunktion, A-481-F
TAKIGEN
[Features]
· This lock comes standard equipped with a new reversible key TAK60 and a dust-proof shutter, with excellent operability.
· The mechanism used for forcibly pushing the handle out is activated by pressing the button strongly.
· Manufactured by Nitto K.K. H-83/84/86 and panel drilling are compatible.
· Waterproof type (using O-ring/packing).
· Left/right combination type (exchange left and right by turning the cam)
ab∗ : | 35.29 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Wasserdichter Flachgriff mit erzwungener Auslassfunktion, A-494-12
TAKIGEN
[Features]
· This lock comes standard equipped with a new reversible key TAK60 and a dust-proof shutter, with excellent operability.
· When key is turned, forcibly pushing the handle up by 6 mm, it pops.
· A-494-2 and panel drilling is compatible.
· Waterproof type (using O ring and sheet packing).
· F satellite chrome plating for improved rust prevention.
· Left/Right combination type
ab∗ : | 60.01 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
Kunststoff eingelassener Griff AP-501
TAKIGEN
[Features]
· Lock uses reversible key with dust-proof shutter and excellent operability TAK60 as standard equipment. Durable glass fiber reinforced resin is used.
· Made of resin, lightweight.
· Left and right combination
ab∗ : | 14.87 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Wasserdichter salzbeständiger Flachgriff, A-464-J
TAKIGEN
[Features]
· Corresponds to waterproof standard IP × 6.
· Developed for heavy salt damage, making it ideal for doors requiring salt tolerance.
· Rubber cap that protects the lock part from rainwater and dust is standard equipment.
· Change from conventional sheet packing to convex type packing of soft rubber molding.
· Improved adhesion.
· Handle shaft part has a double O ring specification, which improves waterproofing and operability.
· A new reversible key with a dust proof shutter with excellent operability, TAK60 is standard equipment.
· Made from aluminum and lightweight
ab∗ : | 33.43 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· This lock comes standard equipped with a new reversible key TAK60 and a dust-proof shutter, with excellent operability.
· Panel drilling dimensions are compatible with A-160 / A-240, etc. series (A-464-F-1).
· With tightening mechanism.
· In conjunction with the raising and lowering of the handle, the stopper moves back and forth (3 mm).
· For right side
ab∗ : | 42.08 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Dünner, flacher Schwenkgriff A-464
TAKIGEN
[Features]
· Waterproof type (O ring / sheet packing used).
· Panel drilling dimensions are compatible with A-160· A-240 series, etc.
· Left/right combination type (exchange left and right by turning over the cam).
ab∗ : | 18.95 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Dünner, flacher Schwenkgriff A-464-C
TAKIGEN
[Features]
· This lock comes standard equipped with a new reversible key TAK60 and a dust-proof shutter, with excellent operability.
· Panel drilling dimensions are compatible with A-160· A-240 series, etc.
· Height from the mounting surface to the stopper is suppressed to 12.5 mm, which places no burden on the internal design of the board.
· Left/right combination type (exchange left and right by turning over the cam)
ab∗ : | 23.54 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Dünner, flacher Schwenkgriff A-464-L
TAKIGEN
[Features]
· Waterproof type (using O ring and sheet packing).
· A new reversible key with a dust proof shutter with excellent operability, TAK60 is standard equipment (A-464-L-TAK60).
· Panel drilling dimensions are compatible with A-160· A-240 series, etc.
· Left/right combination type (exchange left and right by turning over the cam)
ab∗ : | 33.43 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Dünner, flacher Schwenkgriff A-499
TAKIGEN
[Features]
· Push slide pin tumbler TAK40 is used, so the lock portion fits compactly, and space can be effectively used both inside and outside the panel surface.
· Temporary fixation can be done with one touch and workability is improved.
· Left/right combination type (exchange left and right by turning over the cam)
ab∗ : | 53.83 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
Dünner wasserdichter Flachgriff A-494
TAKIGEN
[Features]
· This lock comes standard equipped with a new reversible key TAK60 and a dust-proof shutter, with excellent operability.
· When key is turned, forcibly pushing the handle up by 6 mm, it pops.
· A-494-2 and panel drilling is compatible.
· Waterproof type (using O ring / sheet packing) satellite chrome plating with improved rust prevention.
· For both left hand and right hand use
ab∗ : | 21.68 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Dünner wasserdichter Flachgriff A-960
TAKIGEN
[Features]
· The mechanism used for forcibly pushing the handle out is activated by pressing the button strongly.
· Compact thin type with a depth of 11.5 mm from the panel surface to the stopper.
· A-480/490 and panel drilling dimensions are compatible.
· A new reversible key with a dust proof shutter with excellent operability, TAK60 is standard equipment (A-960-TAK60).
· Rustproof satellite chrome plating (25 μm).
· Left and right hand use (you can exchange left and right by turning the stopper over)
ab∗ : | 34.60 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
TAKIGEN
[Features]
· The handle and stopper are directly connected and can be forcibly rotated, and there is no malfunction due to distortion of the housing.
· Stainless steel flush handle is compatible with A-1260 for installation.
· Left and right hand dual use (exchange the left and right by turning the stopper over).
ab∗ : | 17.16 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Flacher Schwenkhebel (Beschichtung) A-475-A-SLV
TAKIGEN
[Features]
· The handle and stopper are directly connected and can be forcibly rotated, and there is no malfunction due to distortion of the housing.
· Panel drilling dimensions are the same as A-160 / A-240/etc. A-475 series.
· Left and right hand use (you can exchange left and right by turning the stopper around
ab∗ : | 17.36 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Warenzeichen |
---|
Artikelserie |
CAD |
ab∗ |
Minimum Lieferzeit |
Spezifikationen |
Warenzeichen | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN | TAKIGEN |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Artikelserie | Wasserdichter Flachgriff mit erzwungener Auslassfunktion, A-481-N | Automatik-Verschluss Spülgriff (Zylinderverschluss-Model) A-480-A | Rostfreier Edelstahl Bündige Griffleiste mit automatischer Verriegelung A-1480 | Wasserdichter Edelstahl-Flachgriff mit Zwangs- Extrusionsfunktion, A-1481-F | Wasserdichter Edelstahl-Flachgriff mit Zwangs- Extrusionfunktion, A-1481-N | Wasserdichter Flachgriff mit erzwungener Auslassfunktion, A-481-F | Wasserdichter Flachgriff mit erzwungener Auslassfunktion, A-494-12 | ||||||||||||||||||||||||||||||||||||||
CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
ab∗ | 95.51 € *Stückpreis Standardkonfiguration | 42.08 € *Stückpreis Standardkonfiguration | 10.55 € *Stückpreis Standardkonfiguration | 91.24 € *Stückpreis Standardkonfiguration Mengenrabatt | 26.18 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.48 € *Stückpreis Standardkonfiguration | 2.35 € *Stückpreis Standardkonfiguration | 8.46 € *Stückpreis Standardkonfiguration | 79.79 € *Stückpreis Standardkonfiguration | 84.75 € *Stückpreis Standardkonfiguration | 39.50 € *Stückpreis Standardkonfiguration Mengenrabatt | 31.58 € *Stückpreis Standardkonfiguration | 139.43 € *Stückpreis Standardkonfiguration | 48.89 € *Stückpreis Standardkonfiguration | 90.74 € *Stückpreis Standardkonfiguration | 90.25 € *Stückpreis Standardkonfiguration | 90.13 € *Stückpreis Standardkonfiguration | 90.13 € *Stückpreis Standardkonfiguration | 94.76 € *Stückpreis Standardkonfiguration | 95.51 € *Stückpreis Standardkonfiguration | 76.08 € *Stückpreis Standardkonfiguration | 134.95 € *Stückpreis Standardkonfiguration | 87.22 € *Stückpreis Standardkonfiguration | 14.43 € *Stückpreis Standardkonfiguration Mengenrabatt | 19.21 € *Stückpreis Standardkonfiguration | 55.07 € *Stückpreis Standardkonfiguration | 51.36 € *Stückpreis Standardkonfiguration | 43.94 € *Stückpreis Standardkonfiguration | 43.94 € *Stückpreis Standardkonfiguration | 27.86 € *Stückpreis Standardkonfiguration | 72.38 € *Stückpreis Standardkonfiguration | 39.35 € *Stückpreis Standardkonfiguration Mengenrabatt | 35.29 € *Stückpreis Standardkonfiguration | 60.01 € *Stückpreis Standardkonfiguration | 14.87 € *Stückpreis Standardkonfiguration | 33.43 € *Stückpreis Standardkonfiguration | 42.08 € *Stückpreis Standardkonfiguration | 18.95 € *Stückpreis Standardkonfiguration Mengenrabatt | 23.54 € *Stückpreis Standardkonfiguration Mengenrabatt | 33.43 € *Stückpreis Standardkonfiguration Mengenrabatt | 53.83 € *Stückpreis Standardkonfiguration | 21.68 € *Stückpreis Standardkonfiguration Mengenrabatt | 34.60 € *Stückpreis Standardkonfiguration Mengenrabatt | 17.16 € *Stückpreis Standardkonfiguration Mengenrabatt | 17.36 € *Stückpreis Standardkonfiguration Mengenrabatt |
Minimum Lieferzeit | 5 Arbeitstage | 9 Arbeitstage | 4 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 9 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 5 Arbeitstage | 9 Arbeitstage | Versand am selben Tag | 9 Arbeitstage | 9 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 9 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 9 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | 9 Arbeitstage | 9 Arbeitstage | 24 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 4 Arbeitstage | Versand am selben Tag | 4 Arbeitstage | 9 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 4 Arbeitstage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 9 Arbeitstage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag |
Spezifikationen |
|
|
Loading...
Helfen Sie uns dabei, unsere Webseite noch weiter zu verbessern.
Bitte geben Sie uns Ihr Feedback zu unserem MISUMI e-Katalog.
Vielen Dank für Ihre Unterstützung.
Bitte nutzen Sie das Anfrageformular, wenn Sie eine umgehende Antwort von uns wünschen.