Sonderausführung（Seite 2）

?* Informationen zur Lieferzeit

• 

  Fensterriegel, C-838

  TAKIGEN

  [Features]
  · Improved operability in a soft, curved design. Left hand and right hand use (the drawing shows right hand only).

  CAD ：

  2D / 3D

  ab∗ ：	3.50 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Klappgriff mit Schutzring, A-417-F

  TAKIGEN

  [Features]
  · Japan Vending Machine Industry Association standard locks can be incorporated.
  · Reinforce the cylinder part with a hardened guard ring.
  · Protects from drill and other damages.
  · Can protect important parts inside the handle.
  · Prevents damage and unlocking by forced rotation of the lock.
  · Prevention mechanism for forcibly picking the lock.
  · Reliable locking by the double latch mechanism.
  · Lock can be easily replaced with 1 Phillips screwdriver.
  · One action lock activated just by pushing the handle.
  · Use personal coin lock (C-288) for the standard lock.
  · Left/Right combination type.

  CAD ：

  2D / 3D

  ab∗ ：	43.67 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Cattle-Modell Eingelassener Griff A-111

  TAKIGEN

  [Features]
  · Ideal for doors which are required to be airtight.
  · Waterproof type (O ring used).
  · Adjustable screw allows fine adjustment of grip.
  · Excellent corrosion resistance.
  Easy installation

  CAD ：

  2D

  ab∗ ：	31.97 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Side-Lift-Ausführung, zur Flächenmontage, Cremorne-Bolzen, A-328

  TAKIGEN

  [Features]
  · Easy to install surface attachment type.
  · Maintenance is very easy compared with digging type.
  · Strong seal with upper and lower rods.
  · It is thin with a height of about 45 mm from the mounting surface.
  · For left or right opening use

  CAD ：

  2D

  ab∗ ：	53.84 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahlhandgriff A-1376

  TAKIGEN

  [Features]
  · High security lock TAK70, and TAK80 can be incorporated.
  · Made of stainless steel, corrosion resistant.
  · Front attaching type can be installed easily.
  · Strongly sealed with 2 points (A-1376-2A), or 3 points (A-1376-3A).
  Rainproof, dust-proof type (using lock cap, O ring).
  · Standard setting opens to the right.
  · Please specify when using to open to the left

  CAD ：

  2D / 3D

  ab∗ ：	558.14 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Behältergriff aus Edelstahl FA-1810

  TAKIGEN

  [Features]
  · Made of stainless steel, with excellent corrosion resistance.
  · Left and right combination

  CAD ：

  2D / 3D

  ab∗ ：	77.52 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Behältergriff aus Edelstahl FA-1811N

  TAKIGEN

  [Features]
  · Conventional product FA-810 small type.
  · The handle, plate etc. were changed from cast iron to stainless steel.
  · Made of stainless steel, corrosion resistant.
  · Left and right combination

  CAD ：

  2D / 3D

  ab∗ ：	88.79 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Behältergriff aus Edelstahl FA-1820

  TAKIGEN

  [Features]
  · Ideal for opening and closing medium, small size doors.
  · The hook and keeper are made by forging and are highly resistant to impact.
  · The handle bracket has a rotation prevention mechanism.
  · Rotation is smooth since the pipe guide has built-in resin bearings.
  · Made of stainless steel, corrosion resistant.
  · Left and right combination

  CAD ：

  2D / 3D

  ab∗ ：	193.80 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Behältergriff aus Edelstahl FA-1825N

  TAKIGEN

  CAD ：

  2D / 3D

  ab∗ ：	155.04 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Behältergriff FA-810

  TAKIGEN

  [Features]
  · Dual shared type

  CAD ：

  2D / 3D

  ab∗ ：	49.40 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Behältergriff FA-811

  TAKIGEN

  [Features]
  · Conventional product FA-810 small type.
  · The handle, plate etc. were changed from cast iron to stainless steel.
  · Left and right combination

  CAD ：

  2D / 3D

  ab∗ ：	43.01 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl Doppelsichelgriff A-1293

  TAKIGEN

  [Features]
  · Made of stainless steel, with excellent corrosion resistance.
  · Since the hook is on both sides you can hold the sliding door open.
  · Left and right combination

  CAD ：

  2D

  ab∗ ：	93.02 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl Doppelsichelgriff A-1299

  TAKIGEN

  CAD ：

  2D

  ab∗ ：	93.02 €
  Minimum Lieferzeit ：	50 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rostfreier Edelstahl Explosionsresistent Verriegelungsgriff A-1360

  TAKIGEN

  [Features]
  · Outstanding sturdy stainless steel lost wax cast lock handle.
  · Waterproof type (using O ring and packing), fire resistant, heat resistant, saltwater resistant, and acid resistant

  CAD ：

  2D / 3D

  ab∗ ：	20.45 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl eingebetteter Handgriff A-1860

  TAKIGEN

  [Features]
  · Since the pipe is embedded inside the door, it does not disfigure the appearance of the door.
  · Handle is made of stainless steel and has excellent corrosion resistance

  CAD ：

  2D

  ab∗ ：	67.68 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl Oberflächenanbindung, Griff, FA-1947

  TAKIGEN

  [Features]
  · Made of stainless steel, with excellent corrosion resistance.
  · Imposition type is easy to install and maintain.
  · By just pulling the grip, you can open and close with one touch.
  · Made using elastomer resin for good grip.
  · Lock has a reversible key and a dust-proof shutter.
  · Can be sealed.
  · For both left hand and right hand use

  CAD ：

  2D

  ab∗ ：	170.54 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Doppelsichelgriff A-298

  TAKIGEN

  [Features]
  · Acrylic resin baking provides excellent corrosion resistance.
  · Aluminum made to be lightweight.
  · Since the hook is on both sides you can hold the sliding door open.
  · For both left hand and right hand use

  ab∗ ：	82.69 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Doppelter Verriegelungsgriff A-866-1L

  TAKIGEN

  [Features]
  · Sturdy anti-vibration structure with a double snatch lock.
  · Handle operation and locking / unlocking can be done from inside and outside the door.
  · Since the inner handle and outer handle are connected with a rod, there is no restriction on the placement

  CAD ：

  3D

  ab∗ ：	28.92 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Herausziehbarer Blindgriff mit Schlüssel A-437

  TAKIGEN

  [Features]
  · Because locks are embedded and facing downward, it is difficult to access illegally.
  · Since space boxes can be separated, just the pop handles can be sold. Use it with your original space box.
  · Installing the guard plate prevents theft by drill damage to the front of the handle.
  · Reliable locking by the double latch mechanism.
  · Has high operability due to the dedicated built-in lock.
  · Japan Vending Machine Industry Association standard locks can be incorporated. However, depending on the shape of the key plate, it may not be usable.
  · One action lock activated just by pushing the handle.
  · Left and right dual use type.

  CAD ：

  2D / 3D

  ab∗ ：	70.29 €
  Minimum Lieferzeit ：	49 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Bündiger Griff A-873

  TAKIGEN

  [Features]
  · Integrated structure of lock and handle.
  · Lock has a reversible key and a dust-proof shutter.
  · Flat type with few protrusions on door surface

  CAD ：

  2D

  ab∗ ：	57.03 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoff eingelassener Griff AP-874

  TAKIGEN

  [Features]
  · Remote operation of locking device is possible using rod or wire.
  · Lock has a reversible key and a dust-proof shutter.
  · Round, flat type with few protrusions.
  · The lightening of weight can be measured as it is made from resin

  CAD ：

  2D

  ab∗ ：	28.29 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Bündiger Griff, Kontrollzentrum A-873-2C

  TAKIGEN

  [Features]
  · Remote operation of locking device is possible using rod or wire.
  · Lock has a reversible key and a dust-proof shutter.
  · Flat type with few protrusions.
  · A structure that can confirm half-shut status

  CAD ：

  2D / 3D

  ab∗ ：	92.48 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Bündiger Griff, Kontrollzentrum A-873-2C-G

  TAKIGEN

  [Features]
  · A-873-2C reverse link type.
  · Remote operation of locking device is possible using rod or wire.
  · The control center of the conventional product is equipped with an internal locking / unlocking mechanism.
  · With a dust proof shutter reversible key, the built-in click mechanism gives a feeling of reliable operation.
  · Flat type with few protrusions.
  · A structure that can confirm half-shut status.
  · Key operation is the same as in a passenger car, with one place where the key can be removed

  CAD ：

  2D

  ab∗ ：	92.16 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Hochzieh-Griff A-432

  TAKIGEN

  [Features]
  · High security lock TAK80 is standard equipment.
  · Pull the handle lever to get a rod stroke of 18 mm.
  · Based on the mounting position of the handle, outside and inside can be set.
  · Use B-1071-3D (B-71-3D) for the hinge.
  · Striker has mounting compatibility with the recommended hinge B-1071-3D, and the door opening can be rearranged as desired.
  · Multi-point tightening is possible.
  · Right and left dual use type (change between left and right by inverting the striker)

  CAD ：

  2D / 3D

  ab∗ ：	5.14 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Klappgriff A-403

  TAKIGEN

  [Features]
  · Fewer protrusions on the panel attachment surface, eliminating the harmful effects caused by the protrusions.
  · For easy opening and closing of the door, insert and rotate the key to pop up the handle.
  · Left / right dual use type (you can exchange the left and right by turning over the cam)

  CAD ：

  2D / 3D

  ab∗ ：	33.18 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Klappgriff A-403-A

  TAKIGEN

  [Features]
  · A-403 personal coin lock on the lock (C-288 type).
  · Plenty of key variations.
  · The protrusion from the panel mounting surface is 9.5 mm, so harm caused by protrusion is eliminated.
  · For easy opening and closing of the door, insert and rotate the key to pop up the handle.
  · Left / right dual use type (you can exchange the left and right by turning over the cam)

  ab∗ ：	60.71 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Klappgriff A-412-A

  TAKIGEN

  [Features]
  · Japan Vending Machine Industry Association standard product locks can be incorporated.
  · One action locking by pushing the handle.
  · Standard lock uses a personal coin lock (C-288).
  · Left / right dual use type (you can exchange the left and right by turning over the cam)

  CAD ：

  2D

  ab∗ ：	58.58 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Klappgriff A-412-B

  TAKIGEN

  [Features]
  · Japan Vending Machine Industry Association standard product locks can be incorporated.
  · One action locking by pushing the handle.
  · Left / right dual use type (you can exchange the left and right by turning over the cam)

  CAD ：

  2D

  ab∗ ：	60.71 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Klappgriff A-421

  TAKIGEN

  [Features]
  · Japan Vending Machine Industry Association standard product locks can be incorporated.
  · Lock forcible key removal prevention mechanism.
  · Reliable locking by the double latch mechanism.
  · One action locking by pushing the handle.
  · Pop handle mini A-407 is a more sturdy type.
  · Dimensions of panel drilling are the same.
  · Standard lock uses a personal coin lock (C-288).
  · Left / right dual use type (you can exchange the left and right by turning over the cam)

  CAD ：

  2D / 3D

  ab∗ ：	50.06 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Klappgriff A-422

  TAKIGEN

  [Features]
  · Japan Vending Machine Industry Association standard product locks can be incorporated.
  · One action locking by pushing the handle.
  · Left / right dual use type (you can exchange left and right by turning over the cam. ) Standard lock uses a personal coin lock (C-288).
  · Optional waterproof packing for latch hole / switch hole

  CAD ：

  2D

  ab∗ ：	39.57 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Hebegriff A-868

  TAKIGEN

  [Features]
  · This handle adapts to every door; lift doors, sliding doors, opening doors, etc.
  · Large and easy to operate.
  · Remote operation of locking device is possible using rod.
  · Lock has a reversible key and a dust-proof shutter.
  · For left hand or right hand use

  CAD ：

  2D / 3D

  ab∗ ：	55.97 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Verriegelungsplatte A-417-LP

  TAKIGEN

  [Features]
  · Pop handle A-417-B· A-417-C· A-427-W can be set.
  · Close door with one touch.
  · Unlike conventional rod bars, this does not scratch the casing.
  · Also serves as reinforcement around the handle due to the lock plate.
  · Easy to install by unit type

  CAD ：

  2D

  ab∗ ：	73.48 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Griff für Schiebetür A-35-S

  TAKIGEN

  [Features]
  · Beautiful external appearance thanks to the bronze casting mirror finish

  CAD ：

  2D / 3D

  ab∗ ：	155.04 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoff-Harz Handgriff für Schiebetüren, AP-889

  TAKIGEN

  [Features]
  · Soft to the touch.
  · There is a finger hook for closing the door, with smooth operation.
  · Ideal for small sliding doors.
  · For both left hand and right hand use

  CAD ：

  2D

  ab∗ ：	19.77 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Drucktaster Ein-Griff-Ausführung A-870

  TAKIGEN

  [Features]
  · Lock has a reversible key and a dust-proof shutter.
  · A-871 (for large-sized doors) to achieve unification of design by combination

  CAD ：

  2D / 3D

  ab∗ ：	35.17 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Drucktaster Modell mit doppeltem Griff A-871

  TAKIGEN

  [Features]
  · Lock has a reversible key and a dust-proof shutter.
  · Link device (C-871-2-S) combination enables one-touch open and close.
  · Open and close the door with both hands.
  · Push type control center C-871 (P.1128) can be combined

  CAD ：

  3D

  ab∗ ：	40.49 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Griff für Klapptüren, A-35-P

  TAKIGEN

  [Features]
  · Beautiful external appearance thanks to the bronze casting mirror finish

  CAD ：

  2D / 3D

  ab∗ ：	139.53 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Schloss für Boote A-302

  TAKIGEN

  [Features]
  · Acrylic resin baking provides excellent corrosion resistance.
  · One-touch opening and closing.
  · Door can be opened either inside or outside.
  · Made of aluminum alloy, lightweight.
  · For left hand and right hand use (photos show right hand use)

  CAD ：

  2D

  ab∗ ：	64.59 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kleines Cremorne-Schloss A-363

  TAKIGEN

  [Features]
  · Low cost extended bolt lock.
  · Since they are front faced, installation and maintenance are easy.
  · Waterproof for right/left

  CAD ：

  2D / 3D

  Minimum Lieferzeit ：	10 Arbeitstage

• 

  Kleines oberflächenmontiertes Cremorne-Schloss A-343-A

  TAKIGEN

  [Features]
  · Easy to install surface attachment type.
  · Maintenance is very easy compared with digging type.
  · Strong seal with large dead bolt.
  · Rainproof· Dust-proof type for right opening/left opening

  CAD ：

  3D

  ab∗ ：	100.78 €
  Minimum Lieferzeit ：	49 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Großer Auslösegriff A-869

  TAKIGEN

  [Features]
  · 3-point tightening is possible by combining with the C-878 control center.
  · Available in customized colors.
  · High-performance lubricant C-985 can be applied to sliding parts for regular long-term use

  CAD ：

  2D / 3D

  ab∗ ：	27.71 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Großer robuster Kunststoffgriff AP-886

  TAKIGEN

  [Features]
  · Soft touch handle ideal for large lift doors.
  · Integrated structure of lock and handle.
  · Lock has a reversible key and a dust-proof shutter.
  · Flat type with few protrusions on door surface

  CAD ：

  2D

  ab∗ ：	40.00 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Verriegelungsgriff zum Befestigen auf großer Oberfläche A-388N

  TAKIGEN

  [Features]
  · Please apply high-performance lubricant C-985 to ensure long-term use.
  · We recommend the application of a "Loosening prevention agent" on the screws for the stopper plate of this product in order to prevent looseness.
  · Please be aware that rotating the key more than necessary may damage the lock/key tip

  CAD ：

  2D

  ab∗ ：	102.81 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flacher Griffhebel, A-885-B

  TAKIGEN

  [Features]
  · Flat type with few projections from the door surface.
  · Lock has a reversible key and a dust-proof shutter.
  · Snatch-lock type flat handle is strong against vibration and impact

  CAD ：

  2D

  ab∗ ：	53.94 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Integrierter Griff A-860

  TAKIGEN

  [Features]
  · Since the pipe is embedded inside the door, it does not disfigure the appearance of the door.
  · Handle is big and easy to grasp with excellent operability.
  · Lock has a reversible key and a dust-proof shutter

  CAD ：

  2D

  ab∗ ：	63.42 €
  Minimum Lieferzeit ：	9 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...