Leitungsschläuche / Leitungsrohrkomponenten

?* Informationen zur Lieferzeit

• 

  Montageflansch für Spiralschläuche

  MISUMI

  • Mengenrabatt

  CAD ：

  2D / 3D

  ab∗ ：	9.90 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Zubehör für Spiralschläuche/Haubenabdeckung mit Flansch

  MISUMI

  • Mengenrabatt

  CAD ：

  2D / 3D

  ab∗ ：	79.70 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Zubehör für Spiralschläuche/Stutzen

  MISUMI

  • Mengenrabatt

  CAD ：

  2D / 3D

  ab∗ ：	6.70 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Staubsammelbehälter

  MISUMI

  CAD ：

  2D / 3D

  ab∗ ：	138.00 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Manschette für Rohrleitung N.S.D.

  KANAFLEX CORPORATION

  Attractive-looking duct N.S.D. cuffs.

  • Mengenrabatt

  ab∗ ：	2.47 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Leitungsschellen

  KANAFLEX CORPORATION

  Visually appealing duct cuffs.

  • Mengenrabatt

  ab∗ ：	2.52 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flexibler Schlauch P-Ausführung / P-2-Ausführung / Feuersichere P-Ausführung Manschette

  TIGERS POLYMER

  [Features]
  · Material: synthetic rubber (P type, P-2 type EPDM), (flame retardant P type CR)

  ab∗ ：	2.84 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Ti-Kanalschlauch Manschette N-Modell

  TIGERS POLYMER

  [Features]
  Material: Ø 16 to Ø 150 Soft PVC, Ø 200 Synthetic Rubber (EPDM Gray), Ø 250 to Ø300 Synthetic Rubber (EPDM Black)

  ab∗ ：	1.63 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Zubehör für Spiralschläuche aus Aluminium/Flansch

  MISUMI

  • Mengenrabatt

  CAD ：

  2D / 3D

  ab∗ ：	10.00 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Zubehör für Spiralschläuche aus Aluminium/Dämpfer

  MISUMI

  • Mengenrabatt

  CAD ：

  2D / 3D

  ab∗ ：	67.40 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Leitungsschellen

  TOTAKU INDUSTRIES

  PVC duct cuffs for connecting duct hose (rubber make on φ175 type only). Available in gray and ivory colors.

  • Mengenrabatt

  ab∗ ：	2.99 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Ti-Kanalschlauch für abriebfeste GL-Modell-Manschette.

  TIGERS POLYMER

  Cuff dedicated to the abrasion resistant GL type.

  ab∗ ：	6.83 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Wickelfalzrohrverbindung, Deckel für gerade Rohre

  KURIMOTO

  [Features]
  · Fitting made of molten zinc plated steel according to JIS G 3302.
  · [Please be sure to check the safety precautions listed in the catalog.]

  ab∗ ：	7.32 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Wickelfalzrohrverbindung, Flansch-Farbe

  KURIMOTO

  This fitting is made of molten zinc-plated steel conforming to JIS G 3302. [Check the precautions in the catalog for safety]

  ab∗ ：	7.45 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Manschetten für Rohrleitung für Typ AD-2/MultiNA®

  KURARAYPLASTICS

  ab∗ ：	5.50 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Manschette für TAC-Helanleitung

  TOTAKU INDUSTRIES

  Rubber cuffs for connecting to TAC Heran ducts.

  • Mengenrabatt

  ab∗ ：	7.56 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Nicht-PVC-Rohrmanschette

  TOTAKU INDUSTRIES

  [Features]
  -Dechlorinated cuffs that connect to the TAC Eco duct

  • Mengenrabatt

  ab∗ ：	5.22 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Manschette für TAC-Verlängerungsleitung

  TOTAKU INDUSTRIES

  Rubber cuffs for connecting to TAC telescopic ducts.

  ab∗ ：	5.28 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  N.S.-Rohrschelle

  KANAFLEX CORPORATION

  Burnable, with little ash left after incineration. Produces no dioxin, hydrogen chloride gas, sulfur oxides, or other poison gases.

  • Mengenrabatt

  ab∗ ：	2.37 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  TAC Festrohr-Auslassabdeckung

  TOTAKU INDUSTRIES

  Aesthetic cover for the end of a TAC rigid duct. Also prevents damage to the cut surface.
  
  [Features]
  · Vinyl chloride free cuffs for connecting to Totaku Industries TAC eco duct.
  · Variety of sizes available.

  ab∗ ：	2.77 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Ti-Kanalschlauch Manschette GL-Modell / GL-E-Modell / GL-ST-Modell

  TIGERS POLYMER

  [Features]
  · Material: φ25 to φ150 soft PVC φ175 φ200 synthetic rubber (EPDM)

  ab∗ ：	1.91 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flexibler Schlauch A-Ausführung Anschlussbuchse

  TIGERS POLYMER

  Material: PVC

  ab∗ ：	3.76 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Wickelfalzrohr, Deckel für Gelenke

  KURIMOTO

  Fitting made of molten zinc plated steel which conforms to JIS G 3302 standards. [Please confirm the safety precautions in the catalog]
  
  [Features]
  Fitting is made of steel plate and plated with molten zinc in accordance with JISG3302

  ab∗ ：	9.23 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Wickelfalzrohr, Flanschplatte

  KURIMOTO

  [Please read the Safety Precautions written in the catalog]
  
  [Features]
  · A plate flange for connecting flanges (based on stainless steel/coated).

  ab∗ ：	13.97 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Wickelfalzrohrverbindung, Flanschwinkel

  KURIMOTO

  [Please read the Safety Precautions written in the catalog]
  
  [Features]
  · An angle flange for connecting flanges (based on stainless steel/coated).

  ab∗ ：	23.23 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Wickelfalzrohrverbindung, Kautschukdichtung

  KURIMOTO

  Packing for flange connection. [Please be sure to check the safety precautions listed in the catalog]
  
  [Features]
  • The wax used in the molding of the spiral duct offers sufficient reinforcing effects for use with high speed ducts, dust collection ducts, and exhaust ducts.
  • The inner surface of the spiral duct is completely circular and smooth and as such the resistance is extremely low. In addition, a lock seam has been applied via machine molding, and as such the leakage amount per duct is now just 1/1000 that of the square duct.
  • Connection work for the spiral duct is simple. Also, if hung from the ceiling, its workability is good, helping save greatly on construction time.
  • In addition, as it is constructed in a factory it offers a solid and reliable build quality.
  • Spiral ducts are standard products that are mass produced in factories, helping keep costs down.
  • In addition, with a comparatively small surface area compared to a square duct, you need only send the required air flow, helping reduce heating costs.

  ab∗ ：	5.82 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rostfreies Rohrgelenk, Flanschplatte

  KURIMOTO

  Plate flange made of SUS304 based on JIS G 4305. [Please confirm the precautions in the catalog for safety]
  
  [Features]
  · Plate flange made of SUS304 based on JISG4305

  ab∗ ：	50.89 €
  Minimum Lieferzeit ：	11 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rostfreies Rohrgelenk, Flanschwinkel

  KURIMOTO

  Angle flange made of SUS304 based on JIS G 4305. [Please confirm the precautions in the catalog for safety]
  
  [Features]
  · Angle flange made of SUS304 based on JISG4305

  ab∗ ：	79.55 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rostfreies Rohrgelenk, Dichtung

  KURIMOTO

  Flange connection packing. [Read the safety precautions in the catalog]

  ab∗ ：	6.44 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rostfreies Rohrgelenk, Flanschkragen

  KURIMOTO

  Fitting made of SUS304 2B conforming to JIS G 4305. [Please confirm the precautions in the catalog for safety]
  
  [Features]
  · Welded structure so leakage reduced further compared to the spiral model.
  · Opening diameter and pipe thickness are freely selectable.
  · Construction is simple and convenient.
  · Low friction losses.

  ab∗ ：	23.65 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  F-Ringspiralförmige Rohrfitting-Kappe für gerades Rohr

  KURIMOTO

  Fitting made of molten zinc plated steel conforming to JIS G 3302, fitted with a special gasket. [Please confirm the precautions in the catalog for safety]
  
  [Features]
  · Connection and construction are easy.
  · Standard connection method of a spiral duct is a screw + coating + taping.
  · Thorough application may be difficult as application involves work at high places.
  · F-Ring spiral is equipped with a gasket to a fitting portion, and because the construction is only finished by inserting and striking screws, you can expect a solid structure.
  · Can reduce transport, lifting and operations.
  ▪·The overall material volume is reduced when pipes with smaller diameters are sequentially inserted into the straight pipe with large diameter.
  ▪ Therefore, this will significantly lower the weight compared to items prefabricated in a plant.

  ab∗ ：	19.89 €
  Minimum Lieferzeit ：	11 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Verbindungs-Bänder

  KURIMOTO

  Used for silent flex connection. [Read the safety cautions in the catalog]

  ab∗ ：	8.78 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rohr-Rollenband Klemme

  ORIENT CORPORATION

  [Features]
  · Cut to the required size to match the duct aperture.
  · Cut exactly to the determined length.
  · Scale marked on the product meaning a ruler is not required to measure where to cut.
  · This single item can be used with ducts of varying diameters.
  · Safe and secure beveling.
  · Correct size and fit with zero waste.
  · 30 meters can be accommodated in the case.
  · Tightening of the clamp is done with one screwdriver.
  · Easy measurement by simply aligning the guide.
  · Convenient to carry around, and inventory control is also easy.

  ab∗ ：	55.57 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Offset-Band

  OHTSUKA

  Tubing parts for duct or duct hose of a brand famous in Japan. Used when tightening

  • Mengenrabatt

  ab∗ ：	18.15 €
  Minimum Lieferzeit ：	28 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Manschetten für Rohrleitung für Banner ®Typ A/TM-A

  KURARAYPLASTICS

  ab∗ ：	5.10 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Manschetten für Rohrleitung für Clean-Flex® Typ NW

  KURARAYPLASTICS

  ab∗ ：	6.04 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Lüftungsschlauch, Leitungsschellen

  KOHSHIN RUBBER

  Light and strong, and with excellent pressure resistance. Can be cut as required, making it more economical.

  ab∗ ：	7.38 €
  Minimum Lieferzeit ：	8 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Silikontuch (Twill)

  TRUSCO NAKAYAMA

  - Highly pure silica fibers made of 95% silicon dioxide.
  - Excellent heat and shock resistance; can be used in rapidly-changing temperature conditions.
  - No asbestos.
  - Ultra-high temperature material that can be used in 1000°C environments.
  - For high-temperature heat insulation, exhaust duct insulation, high-temperature cushioning and other high-temperature locations.
  

  ab∗ ：	293.49 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...