• Hinweis auf planmäßige Wartung: Diese Seite wird auf Grund von Wartungsarbeiten in der Zeit von 10:00 bis 24:00 (CEST) 21/10/2018 nicht verfügbar sein. Wir entschuldigen uns vielmals für die Unannehmlichkeiten.

Ejector Sleeves


Daten, die angezeigt werden sollen
30
45
60
Sortierung
  1. 1
Warenzeichen
Artikelserie
ab
Minimum Lieferzeit
Product composition
Material
Surface treatment
Head thickness
Shaft diameter tolerance
D/P (Shaft diameter)(mm)
V (Hole diameter)(mm)
Concentricity between the hole and shaft diameters
Boring method
Inner dia. tolerance
Tapered or not
Center pin tip shape

    Straight Ejector Sleeves -SKD61+Nitriding / Concentricity0.03 / 4mm Head / Shaft Diameter Selection_Designation Type-

      Short Ejector Sleeves (Bushings for straight ejector pins)

        Precision Straight Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-

          Straight Ejector Sleeves -SKD61+Nitriding/4mm Head / Shaft Diameter Selection_Designation Type-

            Straight Ejector Sleeves -SKD61+Nitriding /JIS Head / Shaft Diameter Selection_Designation Type-

              Short Ejector Sleeves (Bushings For Ejector Pins)

                Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/Blank Type-

                  Precision Small Diameter・Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/Relief Tapered Type-

                    Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/Blank Type-

                      Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/L Dimension Designation Type-

                        Straight Ejector Sleeves -SKD61+Nitriding / Concentricity0.03 / JIS Head / Shaft Diameter Selection_Designation Type-

                          Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/L Dimension Designation Type-

                            Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/Blank Type-

                              Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/L Dimension Designation Type-

                                Precision Straight Ejector Sleeves -SKH51/0.6mm Wall-

                                Warenzeichen

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                MISUMI

                                Artikelserie

                                Straight Ejector Sleeves -SKD61+Nitriding / Concentricity0.03 / 4mm Head / Shaft Diameter Selection_Designation Type-

                                Short Ejector Sleeves (Bushings for straight ejector pins)

                                Precision Straight Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/4mm Head / Shaft Diameter Selection_Designation Type-

                                Straight Ejector Sleeves -SKD61+Nitriding /JIS Head / Shaft Diameter Selection_Designation Type-

                                Short Ejector Sleeves (Bushings For Ejector Pins)

                                Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/Blank Type-

                                Precision Small Diameter・Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/Relief Tapered Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/Blank Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/4mm Head/L Dimension Designation Type-

                                Straight Ejector Sleeves -SKD61+Nitriding / Concentricity0.03 / JIS Head / Shaft Diameter Selection_Designation Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/4mm Head/L Dimension Designation Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/Blank Type-

                                Straight Ejector Sleeves -SKD61+Nitriding/JIS Head/L Dimension Designation Type-

                                Precision Straight Ejector Sleeves -SKH51/0.6mm Wall-

                                ab

                                -

                                -

                                -

                                -

                                -

                                -

                                -

                                Mengenrabatt

                                -

                                -

                                -

                                -

                                -

                                -

                                -

                                -

                                Minimum Lieferzeit auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage
                                Product compositionSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeve
                                MaterialSKD61SKH51SKH51SKD61SKD61SKD61SKD61SKH51SKD61SKD61SKD61SKD61SKD61SKD61SKH51
                                Surface treatmentNitridedNoNoNitridedNitridedNitridedNitridedNoNitridedNitridedNitridedNitridedNitridedNitridedNo
                                Head thickness4mm(T4)4mm(T4)4mm(T4) / 6mm(JIS) / 8mm(JIS)4mm(T4)6mm(JIS) / 8mm(JIS)4mm(T4)4mm(T4)4mm(T4)4mm(T4)4mm(T4)6mm(JIS) / 8mm(JIS)4mm(T4)6mm(JIS) / 8mm(JIS)6mm(JIS) / 8mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS)
                                Shaft diameter tolerance-0.01/-0.020/-0.005 / -0.01/-0.020/-0.005 / -0.01/-0.02-0.01/-0.02-0.01/-0.02 / -0.01/-0.03-0.01/-0.02-0.01/-0.020/-0.005-0.01/-0.02-0.01/-0.02-0.01/-0.02-0.01/-0.02-0.01/-0.02 / -0.01/-0.03-0.01/-0.02 / -0.01/-0.030/-0.005 / -0.01/-0.02
                                D/P (Shaft diameter)(mm)3.5 ~ 102.5 ~ 83.2 ~ 143.5 ~ 203.5 ~ 204 ~ 104 ~ 162.5 ~ 84 ~ 104 ~ 103.5 ~ 104 ~ 164 ~ 204 ~ 203.2 ~ 14
                                V (Hole diameter)(mm)1.5 ~ 81 ~ 6.80.8 ~ 12.21.5 ~ 161.5 ~ 161.5 ~ 81.5 ~ 3001 ~ 61.5 ~ 81.5 ~ 81.5 ~ 7.91.5 ~ 121.5 ~ 151.5 ~ 150.8 ~ 12.2
                                Concentricity between the hole and shaft diameters◎0.03◎0.01◎0.01◎0.06◎0.06◎0.06◎0.06◎0.005◎0.03◎0.03◎0.03◎0.06◎0.06◎0.06◎0.005 / ◎0.01
                                Boring methodReaming-Wire cutting & polishingReamingReamingReamingReamingGrindingReamingReamingReamingReamingReamingReamingGrinding
                                Inner dia. toleranceH7+0.005/0 / +0.01/0+0.01/0H7H7H7H7+0.005/0H7H7H7H7H7H7+0.005/0 / +0.01/0
                                Tapered or notNoYesNoNoNoNoNoYesNoNoNoNoNoNoNo
                                Center pin tip shapeNoNoNoNoNoNoNoNoNoNoNoNoNoNoNo

                                Loading...

                                1. 1

                                Kategorien beziehen sich auf Ejector Sleeves