Ejector Sleeves

Daten, die angezeigt werden sollen
30
45
60
Sortierung
  1. 1
Warenzeichen
Artikelserie
ab
Minimum Lieferzeit
Product composition
Material
Surface treatment
Head thickness
D (Shaft diameter)(mm)
P (Tip diameter)(mm)
V (Hole diameter)(mm)
Concentricity
Boring method
Inner dia. tolerance
Tapered or not
Shaft diameter tolerance

    Precision Small Diameter·Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/0.3mm Wall Type-

      Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/Free Designation Type

        Precision Stepped Ejector Sleeves -SKH51/0.6mm Wall Type-

          Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/L Dimension Designation Type-

            Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/4mm Head/Free Designation Type-

              Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/Blank Type-

                Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/JIS Head/Free Designation Type-

                  Precision Stepped Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-

                  Warenzeichen

                  MISUMI

                  MISUMI

                  MISUMI

                  MISUMI

                  MISUMI

                  MISUMI

                  MISUMI

                  MISUMI

                  Artikelserie

                  Precision Small Diameter·Thin-Wall Stepped Ejector Sleeves -SKH51/Concentricity0.005/0.3mm Wall Type-

                  Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.03/Free Designation Type

                  Precision Stepped Ejector Sleeves -SKH51/0.6mm Wall Type-

                  Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/L Dimension Designation Type-

                  Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/4mm Head/Free Designation Type-

                  Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/Blank Type-

                  Stepped Ejector Sleeves -SKD61+Nitriding/Concentricity0.06/JIS Head/Free Designation Type-

                  Precision Stepped Ejector Sleeves -SKH51/Concentricity0.01/0.6mm Wall/S Dimension Long Type-

                  ab

                  -

                  -

                  -

                  -

                  -

                  -

                  -

                  -

                  Minimum Lieferzeit auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage
                  Product compositionSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeveSingle sleeve
                  MaterialSKH51SKD61SKH51SKD61SKD61SKD61SKD61SKH51
                  Surface treatmentNoNitridedNoNitridedNitridedNitridedNitridedNo
                  Head thickness4mm(T4)4mm(T4) / 6mm(JIS) / 8mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS)4mm(T4) / 8mm(JIS)4mm(T4)4mm(T4) / 8mm(JIS)6mm(JIS) / 8mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS)
                  D (Shaft diameter)(mm)2.5 ~ 64 ~ 103.5 ~ 2504 ~ 204 ~ 164 ~ 205 ~ 203.5 ~ 250
                  P (Tip diameter)(mm)1.8 ~ 5.953 ~ 9.953.2 ~ 12.93 ~ 6.53 ~ 15.953 ~ 6.53.5 ~ 19.953.2 ~ 12.9
                  V (Hole diameter)(mm)0.8 ~ 5.11.5 ~ 7.90.8 ~ 11.71.5 ~ 151.5 ~ 131.5 ~ 152 ~ 160.8 ~ 11.7
                  Concentricity◎0.005◎0.03◎0.005 / ◎0.01◎0.06◎0.06◎0.06◎0.06◎0.01
                  Boring methodGrindingReamingGrindingReamingReamingReamingReamingWire cutting & polishing
                  Inner dia. tolerance+0.005/0H7+0.005/0 / +0.01/0H7H7H7H7+0.01/0
                  Tapered or notNoNoNoNoNoNoNoNo
                  Shaft diameter tolerance0/-0.005-0.01/-0.020/-0.005 / -0.01/-0.02-0.01/-0.02-0.01/-0.02-0.01/-0.02-0.01/-0.02-0.01/-0.02

                  Loading...

                  1. 1

                  Kategorien beziehen sich auf Ejector Sleeves