• Wichtige Mitteilung: Aufgrund von COVID-19 sind unsere Importkosten für Produkte nach Europa enorm gestiegen. Daher wird ab dem 1. Mai 2020 vorübergehend ein zusätzlicher Frachtkostenzuschlag von 11,50 Euro pro Lieferung berechnet. Weitere Informationen finden Sie hier.

Kernstifte, 1-fach abgestuft


Daten, die angezeigt werden sollen
30
45
60
Sortieren nach:
  1. 1
Warenzeichen
Artikelserie
ab
Minimum Lieferzeit
Material
Surface treatment
Head thickness
Shaft diameter tolerance
Shape
D/P (Shaft diameter)(mm)
Step (Step shape)
Shape (Tip shape)
Applicable sleeve hole diameter tolerance
With/without cooling hole

    One-Step Center Pins -High Speed Steel SKH51/Shaft Diameter (D) Selection/Shaft Diameter Tolerance 0_-0.005 Type-

      One-Step Center Pins -High Speed Steel SKH51/Shaft Diameter (P) Designation (0.01mm Increments)/Shaft Diameter Tolerance 0_-0.005 Type-

        One-Step Center Pins -High Speed Steel SKH51/Shaft Diameter (D) Selection/Shaft Diameter Tolerance -0.01_-0.02 Type-

          One-Step Center Pins -High Speed Steel SKH51/Shaft Diameter (P) Designation (0.01mm Increments)/Shaft Diameter Tolerance -0.01_-0.02 Type-

            One-Step Center Pins -Die Steel SKD61+Nitriding/Shaft Diameter (D) Selection/Shaft Diameter Tolerance -0.01_-0.02 Type-

              One-Step Center Pins -Die Steel SKD61+Nitriding/Shaft Diameter (P) Designation (0.01mm Increments)/Shaft Diameter Tolerance -0.01_-0.02 Type-

                One-Step Center Pins With Cooling Hole -Die Steel SKD61+Nitriding/Shaft Diameter (D) Selection/Shaft Diameter Tolerance -0.01_-0.02 Type-

                  One-Step Center Pins -Die Steel SKD61/4mm Head/Shaft Diameter (D) Selection Type-

                    One-Step Center Pins -Die Steel SKD61/4mm Head/Shaft Diameter (P) Designation (0.01mm Increments) Type-

                      Stepped One-Step Center Pins -High Speed Steel SKH51/Shaft Diameter (P) Designation (0.01mm Increments) Type-

                        Stepped One-Step Center Pins -Die Steel SKD61+Nitriding/Shaft Diameter (P) Designation (0.01mm Increments) Type-

                        Warenzeichen

                        MISUMI

                        MISUMI

                        MISUMI

                        MISUMI

                        MISUMI

                        MISUMI

                        MISUMI

                        MISUMI

                        MISUMI

                        MISUMI

                        MISUMI

                        Artikelserie

                        One-Step Center Pins -High Speed Steel SKH51/Shaft Diameter (D) Selection/Shaft Diameter Tolerance 0_-0.005 Type-

                        One-Step Center Pins -High Speed Steel SKH51/Shaft Diameter (P) Designation (0.01mm Increments)/Shaft Diameter Tolerance 0_-0.005 Type-

                        One-Step Center Pins -High Speed Steel SKH51/Shaft Diameter (D) Selection/Shaft Diameter Tolerance -0.01_-0.02 Type-

                        One-Step Center Pins -High Speed Steel SKH51/Shaft Diameter (P) Designation (0.01mm Increments)/Shaft Diameter Tolerance -0.01_-0.02 Type-

                        One-Step Center Pins -Die Steel SKD61+Nitriding/Shaft Diameter (D) Selection/Shaft Diameter Tolerance -0.01_-0.02 Type-

                        One-Step Center Pins -Die Steel SKD61+Nitriding/Shaft Diameter (P) Designation (0.01mm Increments)/Shaft Diameter Tolerance -0.01_-0.02 Type-

                        One-Step Center Pins With Cooling Hole -Die Steel SKD61+Nitriding/Shaft Diameter (D) Selection/Shaft Diameter Tolerance -0.01_-0.02 Type-

                        One-Step Center Pins -Die Steel SKD61/4mm Head/Shaft Diameter (D) Selection Type-

                        One-Step Center Pins -Die Steel SKD61/4mm Head/Shaft Diameter (P) Designation (0.01mm Increments) Type-

                        Stepped One-Step Center Pins -High Speed Steel SKH51/Shaft Diameter (P) Designation (0.01mm Increments) Type-

                        Stepped One-Step Center Pins -Die Steel SKD61+Nitriding/Shaft Diameter (P) Designation (0.01mm Increments) Type-

                        ab

                        -

                        -

                        -

                        -

                        -

                        -

                        -

                        -

                        -

                        -

                        -

                        Minimum Lieferzeit auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage auf Anfrage
                        MaterialSKH51SKH51SKH51SKH51SKD61SKD61SKD61SKD61SKD61SKH51SKD61
                        Surface treatmentNoNoNoNoNitridedNitridedNitridedNoNoNoNitrided
                        Head thickness4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS)4mm(T4)4mm(T4)4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)4mm(T4) / 6mm(JIS) / 8mm(JIS) / 4mm(JIS)
                        Shaft diameter tolerance0/-0.0050/-0.005-0.01/-0.02-0.01/-0.02-0.01/-0.02 (Reference tolerance)-0.01/-0.02 (Reference tolerance)-0.01/-0.02 (Reference tolerance)0/-0.005 / -0.01/-0.020/-0.005 / -0.01/-0.020/-0.005-0.01/-0.02 (Reference tolerance)
                        ShapeOne-stepOne-stepOne-stepOne-stepOne-stepOne-stepOne-stepOne-stepOne-stepStepped one-stepStepped one-step
                        D/P (Shaft diameter)(mm)1 ~ 120.8 ~ 11.991 ~ 120.8 ~ 11.991.5 ~ 161.5 ~ 206 ~ 161.5 ~ 121 ~ 11.990.8 ~ 11.991.5 ~ 15.99
                        Step (Step shape)A / B / C / D / EA / B / C / D / EA / B / C / D / EA / B / C / D / EA / B / C / D / EA / B / C / D / EA / B / C / D / EA / B / C / D / EA / B / C / D / EA / B / C / D / EA / B / C / D / E
                        Shape (Tip shape)No processing / C / G / T / R / BNo processing / C / G / T / R / BNo processing / C / G / T / R / BNo processing / C / G / T / R / BNo processing / C / G / T / R / BNo processing / C / G / T / R / BNo processing / C / G / T / R / BNo processing / C / G / T / R / BNo processing / C / G / T / R / B--
                        Applicable sleeve hole diameter tolerance+0.005/0+0.005/0+0.01/0 or H7+0.01/0 or H7+0.01/0 or H7+0.01/0 or H7+0.01/0 or H7+0.005/0 / +0.01/0 or H7+0.005/0 / +0.01/0 or H7+0.005/0+0.01/0 or H7
                        With/without cooling holeNoNoNoNoNoNoYesNoNoNoNo

                        Loading...

                        1. 1

                        Kategorien beziehen sich auf Kernstifte, 1-fach abgestuft