TSC series carbide long neck square end mill, 4-flute / long neck model (Teilenummern)
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
- Mengenrabatt
-Demonstriert hohe Leistung bei der Bearbeitung von allgemeinem Stahl, EN 1.4301 Equiv. (gesintert) und wärmebehandeltem Stahl (bis zu 50 HRC)
-Kann die optimale Körperlänge für die Bearbeitung tiefer Teile des Werkstücks auswählen
-Optimal für die Bearbeitung im niedrigen bis mittleren Drehbereich aufgrund des universellen 30°-Spiralwinkels
-Ist mit einer Beschichtung mit hoher Oxidationsbeständigkeit und hoher Härte ausgestattet und erreicht eine lange Lebensdauer. Effektiv bei Hochgeschwindigkeitsbearbeitung und Trockenbearbeitung als Beschichtungseigenschaften
- TS
- General Steel
- 4 Flutes
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Geometry | Torsion Angle (θ) | Additional Classification | Figure | ● Inventory Product □ Manufacturer Product | Under Neck Diameter d1 (mm) | Actual Effective Length Depends on Work Inclination Angle 30' (mm) | Actual Effective Length Depends on Work Inclination Angle 1° (mm) | Actual Effective Length Depends on Work Inclination Angle 2° (mm) | Actual Effective Length Depends on Work Inclination Angle 3° (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
84.30 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 7.5 | 6 | 100 | 50 | Mit Führung | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 4.8 | 52.35 | Without Interference | Without Interference | Without Interference | |
42.45 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 9 | 6 | 70 | 20 | Mit Führung | Standard Helix (30 to 40°) | Stocked Product | 2 | ● | 5.8 | Without Interference | Without Interference | Without Interference | Without Interference | |
42.45 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 9 | 6 | 70 | 30 | Mit Führung | Standard Helix (30 to 40°) | Stocked Product | 2 | ● | 5.8 | Without Interference | Without Interference | Without Interference | Without Interference | |
49.52 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 9 | 6 | 100 | 40 | Mit Führung | Standard Helix (30 to 40°) | Stocked Product | 2 | ● | 5.8 | Without Interference | Without Interference | Without Interference | Without Interference | |
59.84 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 9 | 6 | 100 | 50 | Mit Führung | Standard Helix (30 to 40°) | Stocked Product | 2 | ● | 5.8 | Without Interference | Without Interference | Without Interference | Without Interference | |
20.28 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 1.5 | 4 | 50 | 4 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 4.19 | 4.4 | 4.88 | 5.49 | |
18.89 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 1.5 | 4 | 50 | 6 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 6.28 | 6.59 | 7.32 | 8.24 | |
20.28 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 1.5 | 4 | 50 | 8 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 8.38 | 8.79 | 9.76 | 10.98 | |
22.56 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 1.5 | 4 | 50 | 10 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 10.47 | 10.99 | 12.21 | 13.73 | |
21.41 € | 1 | Verfügbar | 5 Arbeitstage | 1 | 1.5 | 4 | 50 | 12 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 0.95 | 12.57 | 13.19 | 14.65 | 16.48 | |
25.31 € | 1 | Verfügbar | 5 Arbeitstage | 1.2 | 1.8 | 4 | 50 | 6 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.15 | 6.28 | 6.59 | 7.32 | 8.24 | |
27.83 € | 1 | Verfügbar | 5 Arbeitstage | 1.2 | 1.8 | 4 | 50 | 8 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.15 | 8.38 | 8.79 | 9.76 | 10.98 | |
26.91 € | 1 | Verfügbar | 5 Arbeitstage | 1.2 | 1.8 | 4 | 50 | 10 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.15 | 10.47 | 10.99 | 12.21 | 13.73 | |
27.83 € | 1 | Verfügbar | 5 Arbeitstage | 1.2 | 1.8 | 4 | 50 | 12 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.15 | 12.57 | 13.19 | 14.65 | 16.48 | |
31.39 € | 1 | Verfügbar | 5 Arbeitstage | 1.2 | 1.8 | 4 | 50 | 16 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.15 | 16.75 | 17.58 | 19.53 | 21.97 | |
51.85 € | 1 | Verfügbar | 5 Arbeitstage | 1.3 | 1.9 | 4 | 50 | 6 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.25 | 6.28 | 6.59 | 7.32 | 8.24 | |
51.85 € | 1 | Verfügbar | 5 Arbeitstage | 1.3 | 1.9 | 4 | 50 | 10 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.25 | 10.47 | 10.99 | 12.21 | 13.73 | |
22.35 € | 1 | Verfügbar | 5 Arbeitstage | 1.4 | 2.1 | 4 | 50 | 6 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.35 | 6.28 | 6.59 | 7.32 | 8.24 | |
29.66 € | 1 | Verfügbar | 5 Arbeitstage | 1.4 | 2.1 | 4 | 50 | 8 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.35 | 8.38 | 8.79 | 9.76 | 10.98 | |
29.66 € | 1 | Verfügbar | 5 Arbeitstage | 1.4 | 2.1 | 4 | 50 | 10 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.35 | 10.47 | 10.99 | 12.21 | 13.73 | |
29.66 € | 1 | Verfügbar | 5 Arbeitstage | 1.4 | 2.1 | 4 | 50 | 14 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.35 | 14.66 | 15.39 | 17.09 | 19.22 | |
20.72 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 50 | 6 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 6.28 | 6.59 | 7.32 | 8.24 | |
23.95 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 50 | 8 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 8.38 | 8.79 | 9.76 | 10.98 | |
20.72 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 50 | 10 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 10.47 | 10.99 | 12.21 | 13.73 | |
23.95 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 50 | 12 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 12.57 | 13.19 | 14.65 | 16.48 | |
23.95 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 50 | 14 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 14.66 | 15.39 | 17.09 | 19.22 | |
26.91 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 50 | 16 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 16.75 | 17.58 | 19.53 | 21.97 | |
26.91 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 70 | 18 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 18.85 | 19.78 | 21.97 | 24.71 | |
26.91 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | 2.3 | 4 | 70 | 20 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.45 | 20.94 | 21.98 | 24.41 | Without Interference | |
29.66 € | 1 | Verfügbar | 5 Arbeitstage | 1.6 | 2.4 | 4 | 50 | 6 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 6.28 | 6.59 | 7.32 | 8.24 | |
22.35 € | 1 | Verfügbar | 5 Arbeitstage | 1.6 | 2.4 | 4 | 50 | 8 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 8.38 | 8.79 | 9.76 | 10.98 | |
29.66 € | 1 | Verfügbar | 5 Arbeitstage | 1.6 | 2.4 | 4 | 50 | 10 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 10.47 | 10.99 | 12.21 | 13.73 | |
30.55 € | 1 | Verfügbar | 5 Arbeitstage | 1.6 | 2.4 | 4 | 50 | 12 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 12.57 | 13.19 | 14.65 | 16.48 | |
29.66 € | 1 | Verfügbar | 5 Arbeitstage | 1.6 | 2.4 | 4 | 50 | 14 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.55 | 14.66 | 15.39 | 17.09 | 19.22 | |
34.25 € | 1 | Verfügbar | 5 Arbeitstage | 1.7 | 2.5 | 4 | 50 | 6 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.65 | 6.28 | 6.59 | 7.32 | 8.24 | |
28.06 € | 1 | Verfügbar | 5 Arbeitstage | 1.7 | 2.5 | 4 | 50 | 16 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.65 | 16.75 | 17.58 | 19.53 | 21.97 | |
20.72 € | 1 | Verfügbar | 5 Arbeitstage | 1.8 | 2.7 | 4 | 50 | 6 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 6.28 | 6.59 | 7.32 | 8.24 | |
27.83 € | 1 | Verfügbar | 5 Arbeitstage | 1.8 | 2.7 | 4 | 50 | 8 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 8.38 | 8.79 | 9.76 | 10.98 | |
22.35 € | 1 | Verfügbar | 5 Arbeitstage | 1.8 | 2.7 | 4 | 50 | 10 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 10.47 | 10.99 | 12.21 | 13.73 | |
27.83 € | 1 | Verfügbar | 5 Arbeitstage | 1.8 | 2.7 | 4 | 50 | 12 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 12.57 | 13.19 | 14.65 | 16.48 | |
27.83 € | 1 | Verfügbar | 5 Arbeitstage | 1.8 | 2.7 | 4 | 50 | 14 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 14.66 | 15.39 | 17.09 | 19.22 | |
22.35 € | 1 | Verfügbar | 5 Arbeitstage | 1.8 | 2.7 | 4 | 50 | 16 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 16.75 | 17.58 | 19.53 | Without Interference | |
27.83 € | 1 | Verfügbar | 5 Arbeitstage | 1.8 | 2.7 | 4 | 70 | 20 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 20.94 | 21.98 | 24.41 | Without Interference | |
46.58 € | 1 | Verfügbar | 5 Arbeitstage | 1.8 | 2.7 | 4 | 70 | 25 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.75 | 26.18 | 27.47 | 30.51 | Without Interference | |
25.80 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 3 | 4 | 50 | 6 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 6.28 | 6.59 | 7.32 | 8.24 | |
24.22 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 3 | 4 | 50 | 8 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 8.38 | 8.79 | 9.76 | 10.98 | |
21.73 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 3 | 4 | 50 | 10 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 10.47 | 10.99 | 12.21 | 13.73 | |
20.34 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 3 | 4 | 50 | 12 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 12.57 | 13.19 | 14.65 | 16.48 | |
21.46 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 3 | 4 | 50 | 14 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 14.66 | 15.39 | 17.09 | 19.22 | |
21.25 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 3 | 4 | 50 | 16 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 16.75 | 17.58 | 19.53 | Without Interference | |
27.88 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 3 | 4 | 70 | 18 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 18.85 | 19.78 | 21.97 | Without Interference | |
22.40 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 3 | 4 | 70 | 20 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 20.94 | 21.98 | 24.41 | Without Interference | |
25.57 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 3 | 4 | 70 | 25 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 26.18 | 27.47 | Without Interference | Without Interference | |
30.39 € | 1 | Verfügbar | 5 Arbeitstage | 2 | 3 | 4 | 70 | 30 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 1.95 | 31.41 | 32.97 | Without Interference | Without Interference | |
27.88 € | 1 | Verfügbar | 5 Arbeitstage | 2.5 | 3.8 | 4 | 50 | 8 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.4 | 8.38 | 8.79 | 9.76 | 10.98 | |
22.15 € | 1 | Verfügbar | 5 Arbeitstage | 2.5 | 3.8 | 4 | 50 | 12 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.4 | 12.57 | 13.19 | 14.65 | Without Interference | |
23.53 € | 1 | Verfügbar | 5 Arbeitstage | 2.5 | 3.8 | 4 | 50 | 16 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.4 | 16.75 | 17.58 | 19.53 | Without Interference | |
27.88 € | 1 | Verfügbar | 5 Arbeitstage | 2.5 | 3.8 | 4 | 70 | 20 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.4 | 20.94 | 21.98 | Without Interference | Without Interference | |
28.32 € | 1 | Verfügbar | 5 Arbeitstage | 2.5 | 3.8 | 4 | 70 | 25 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.4 | 26.18 | 27.47 | Without Interference | Without Interference | |
37.83 € | 1 | Verfügbar | 5 Arbeitstage | 3 | 4.5 | 6 | 50 | 8 | Sharp Corner | Standard Helix (30 to 40°) | Stocked Product | 1 | ● | 2.9 | 8.38 | 8.79 | 9.76 | 10.98 |
Loading...
Spezifikationen
Model Number
TSC-PEM4LB (Sharp Edge / Stocked Product) / TSC-EM4LB (Standard / Stocked Product)
| Outer Diameter D |
Length Under Neck ℓ1 |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Shank Diameter d |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||||
| 1 | 4 | ● | ● | 1.5 | 0.95 | 50 | 4 | 4.19 | 4.40 | 4.88 | 5.49 | 1 |
| 6 | ● | ● | 6.28 | 6.59 | 7.32 | 8.24 | ||||||
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||
| 1.2 | 6 | ● | ● | 1.8 | 1.15 | 50 | 4 | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||
| 1.3 | 6 | No Standards | ● | 1.9 | 1.25 | 50 | 4 | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||
| 1.4 | 6 | No Standards | ● | 2.1 | 1.35 | 50 | 4 | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||
Model Number
TSC-PEM4LB (Sharp Edge / Stocked Product) / TSC-EM4LB (Standard / Stocked Product)
| Outer Diameter D |
Length Under Neck ℓ1 |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Shank Diameter d |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||||
| 1.5 | 6 | ● | ● | 2.3 | 1.45 | 50 | 4 | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||
| 14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||
| 18 | ● | ● | 70 | 18.85 | 19.78 | 21.97 | 24.71 | |||||
| 20 | ● | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||
| 1.6 | 6 | No Standards | ● | 2.4 | 1.55 | 50 | 4 | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||
| 12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||
| 1.7 | 6 | No Standards | ● | 2.5 | 1.65 | 50 | 4 | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 16 | No Standards | ● | 16.75 | 17.58 | 19.53 | 21.97 | ||||||
| 1.8 | 6 | No Standards | ● | 2.7 | 1.75 | 50 | 4 | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | No Standards | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||
| 10 | No Standards | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||
| 12 | No Standards | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||
| 14 | No Standards | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||
| 16 | No Standards | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||
| 20 | No Standards | ● | 70 | 20.94 | 21.98 | 24.41 | Without Interference | |||||
| 25 | No Standards | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||
| 2 | 6 | ● | ● | 3 | 1.95 | 50 | 4 | 6.28 | 6.59 | 7.32 | 8.24 | 1 |
| 8 | ● | ● | 8.38 | 8.79 | 9.76 | 10.98 | ||||||
| 10 | ● | ● | 10.47 | 10.99 | 12.21 | 13.73 | ||||||
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||
| 14 | ● | ● | 14.66 | 15.39 | 17.09 | 19.22 | ||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||
| 18 | ● | ● | 70 | 18.85 | 19.78 | 21.97 | Without Interference | |||||
| 20 | ● | ● | 20.94 | 21.98 | 24.41 | Without Interference | ||||||
| 25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||
| 30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||
| 2.5 | 8 | ● | ● | 3.8 | 2.4 | 50 | 4 | 8.38 | 8.79 | 9.76 | 10.98 | 1 |
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | Without Interference | ||||||
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||
| 20 | ● | ● | 70 | 20.94 | 21.98 | Without Interference | Without Interference | |||||
| 25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||
Model Number
TSC-PEM4LB (Sharp Edge / Stocked Product) / TSC-EM4LB (Standard / Stocked Product)
| Outer Diameter D |
Length Under Neck ℓ1 |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Shank Diameter d |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | |||||||||
| 3 | 8 | No Standards | ● | 4.5 | 2.9 | 50 | 6 | 8.38 | 8.79 | 9.76 | 10.98 | 1 |
| 12 | ● | ● | 12.57 | 13.19 | 14.65 | 16.48 | ||||||
| 16 | ● | ● | 70 | 16.75 | 17.58 | 19.53 | 21.97 | |||||
| 20 | ● | ● | 20.94 | 21.98 | 24.41 | 27.46 | ||||||
| 25 | ● | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||
| 30 | ● | ● | 31.41 | 32.97 | 36.62 | Without Interference | ||||||
| 40 | ● | ● | 100 | 41.88 | 43.96 | Without Interference | Without Interference | |||||
| 3.5 | 16 | No Standards | ● | 5.5 | 3.35 | 70 | 6 | 16.75 | 17.58 | 19.53 | 21.97 | 1 |
| 25 | No Standards | ● | 26.18 | 27.47 | 30.51 | Without Interference | ||||||
| 35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||
| 4 | 12 | No Standards | ● | 6 | 3.8 | 50 | 6 | 12.57 | 13.19 | 14.65 | 16.48 | 1 |
| 16 | ● | ● | 16.75 | 17.58 | 19.53 | Without Interference | ||||||
| 20 | ● | ● | 70 | 20.94 | 21.98 | 24.41 | Without Interference | |||||
| 30 | ● | ● | 31.41 | 32.97 | Without Interference | Without Interference | ||||||
| 35 | No Standards | ● | 100 | 36.65 | 38.46 | Without Interference | Without Interference | |||||
| 40 | ● | ● | 41.88 | 43.96 | Without Interference | Without Interference | ||||||
| 45 | No Standards | ● | 47.12 | 49.45 | Without Interference | Without Interference | ||||||
| 50 | No Standards | ● | 52.35 | 54.95 | Without Interference | Without Interference | ||||||
| 5 | 16 | ● | ● | 7.5 | 4.8 | 70 | 6 | 16.75 | 17.58 | Without Interference | Without Interference | 1 |
| 25 | ● | ● | 26.18 | 27.47 | Without Interference | Without Interference | ||||||
| 35 | ● | ● | 100 | 36.65 | Without Interference | Without Interference | Without Interference | |||||
| 50 | ● | ● | 52.35 | Without Interference | Without Interference | Without Interference | ||||||
| 6 | 20 | ● | ● | 9 | 5.8 | 70 | 6 | Without Interference | Without Interference | Without Interference | Without Interference | 2 |
| 30 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference | ||||||
| 40 | ● | ● | 100 | Without Interference | Without Interference | Without Interference | Without Interference | |||||
| 50 | ● | ● | Without Interference | Without Interference | Without Interference | Without Interference | ||||||
Model Number
LN-TSC-PEM4S (Sharp Edge / Manufactured Product) / EM4S (Standard / Manufactured Product)
| Outer Diameter D |
Length Under Neck ℓ1 1 mm Increment Designation |
Standard | Sharp Edge | Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Shank Diameter d |
Figure |
| 1.5 | 8 ~ 20 | ● | ● | 3 | 1.45 | 40 | 4 | 3 |
| 2 | 9 ~ 21 | ● | ● | 4 | 1.95 | 40 | 4 | 3 |
| 2.5 | 10 ~ 22 | ● | ● | 5 | 2.4 | 40 | 4 | 3 |
| 3 | 11 ~ 21 | ● | ● | 6 | 2.9 | 45 | 6 | 3 |
| 3.5 | 12 ~ 22 | ● | ● | 7 | 3.3 | 45 | 6 | 3 |
| 4 | 13 ~ 23 | ● | ● | 8 | 3.8 | 45 | 6 | 3 |
| 5 | 15 ~ 25 | ● | ● | 10 | 4.8 | 45 | 6 | 3 |
[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the model numbers differ as below when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number
For Cutting Conditions, Refer to >>Click here.
Weitere Informationen
● The ideal under-neck length can be selected for workpiece machining in deep areas.
● It has a TS film coating with much greater oxidation resistance and hardness than conventional films, yielding a longer operational life and is ideal for high speed machining / dry machining. 
Grundlegende Informationen
| Work Material | General Steel / Heat-Treated Steel / Edelstahl / Gusseisen / Aluminum Alloy / Copper Alloy | Number of Flutes(sheet) | 4 | Model | Long Neck Square |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Processing Applications | Flat Surface / Side Surface / Inclined Cutting | Tolerance of OD(mm) | 0 ~ -0.02 |
Konfigurieren
Basiseigenschaften
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Geometry
- Sharp Corner
- Mit Führung
-
Torsion Angle (θ)
- Standard Helix (30 to 40°)
- Powerful Helix (45° to 60°)
-
Additional Classification
- Manufactured Product
- Stocked Product
-
Ausführung
- LN-TSC-EM4S
- LN-TSC-PEM4S
- TSC-EM4LB
- TSC-PEM4LB
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
- 8 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.