TSC series carbide long neck radius end mill, 4-flute / long neck model (Teilenummern)
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
- Mengenrabatt
-Radius (R)-Genauigkeit von ±5 µm (im Vergleich zu den Herstellermessungen) ermöglicht hochpräzises Fräsen von tiefen Kavitäten
-Durch die Annahme der 4-Spiralform ist es möglich, im Vergleich zur 2-Spiralform mit hoher Vorschubeinstellung zu arbeiten
-Kann nachgeschliffen werden. Bitte informieren Sie sich auf der Seite "Nachschleifservice" über Einsatzverfahren, Leistungsspektrum, Preise usw.
- TS
- General Steel
- 4 Flutes
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Outer Diameter (D) (φ) | R Size (mm) | Work Material | Flute Length (ℓ) (mm) | Overall Length (L) (mm) | Shank Diameter (d) (mm) | Length Under Neck (ℓ1) (mm) | Processing Applications | R Precision (μm) | Additional Classification | #6 | Figure | Under Neck Diameter d1 (mm) | Actual Effective Length Depends on Work Inclination Angle 30' (mm) | Actual Effective Length Depends on Work Inclination Angle 1° (mm) | Actual Effective Length Depends on Work Inclination Angle 2° (mm) | Actual Effective Length Depends on Work Inclination Angle 3° (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
100.21 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 0.2 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 6 | 100 | 6 | 40 | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | ±0.005 | Stocked Product | - | 1 | 3.8 | 41.88 | 43.96 | Without Interference | Without Interference | |
86.88 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 0.5 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 6 | 100 | 6 | 40 | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | ±0.005 | Stocked Product | - | 1 | 3.8 | 41.88 | 43.96 | Without Interference | Without Interference | |
84.64 € | 1 | Verfügbar | 5 Arbeitstage | 4 | 1 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 6 | 100 | 6 | 40 | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | ±0.005 | Stocked Product | - | 1 | 3.8 | 41.88 | 43.96 | Without Interference | Without Interference | |
91.57 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 0.1 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 7.5 | 70 | 6 | 25 | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | ±0.005 | Stocked Product | - | 1 | 4.8 | 26.18 | 27.47 | Without Interference | Without Interference | |
79.72 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 0.2 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 7.5 | 70 | 6 | 25 | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | ±0.005 | Stocked Product | - | 1 | 4.8 | 26.18 | 27.47 | Without Interference | Without Interference | |
98.04 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 0.3 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 7.5 | 70 | 6 | 25 | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | ±0.005 | Stocked Product | - | 1 | 4.8 | 26.18 | 27.47 | Without Interference | Without Interference | |
96.88 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 0.5 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 7.5 | 70 | 6 | 25 | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | ±0.005 | Stocked Product | - | 1 | 4.8 | 26.18 | 27.47 | Without Interference | Without Interference | |
75.84 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 1 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 7.5 | 70 | 6 | 25 | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | ±0.005 | Stocked Product | - | 1 | 4.8 | 26.18 | 27.47 | Without Interference | Without Interference | |
109.75 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 0.1 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 7.5 | 100 | 6 | 35 | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | ±0.005 | Stocked Product | - | 1 | 4.8 | 36.65 | Without Interference | Without Interference | Without Interference | |
115.54 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 0.2 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 7.5 | 100 | 6 | 35 | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | ±0.005 | Stocked Product | - | 1 | 4.8 | 36.65 | Without Interference | Without Interference | Without Interference | |
110.05 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 0.3 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 7.5 | 100 | 6 | 35 | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | ±0.005 | Stocked Product | - | 1 | 4.8 | 36.65 | Without Interference | Without Interference | Without Interference | |
115.54 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 0.5 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 7.5 | 100 | 6 | 35 | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | ±0.005 | Stocked Product | - | 1 | 4.8 | 36.65 | Without Interference | Without Interference | Without Interference | |
110.05 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 1 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 7.5 | 100 | 6 | 35 | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | ±0.005 | Stocked Product | - | 1 | 4.8 | 36.65 | Without Interference | Without Interference | Without Interference | |
90.02 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 0.1 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 9 | 70 | 6 | 30 | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | ±0.005 | Stocked Product | - | 2 | 5.8 | Without Interference | Without Interference | Without Interference | Without Interference | |
59.84 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 0.2 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 9 | 70 | 6 | 30 | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | ±0.005 | Stocked Product | - | 2 | 5.8 | Without Interference | Without Interference | Without Interference | Without Interference | |
90.48 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 0.3 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 9 | 70 | 6 | 30 | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | ±0.005 | Stocked Product | - | 2 | 5.8 | Without Interference | Without Interference | Without Interference | Without Interference | |
74.00 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 0.5 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 9 | 70 | 6 | 30 | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | ±0.005 | Stocked Product | - | 2 | 5.8 | Without Interference | Without Interference | Without Interference | Without Interference | |
94.59 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 1 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 9 | 70 | 6 | 30 | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | ±0.005 | Stocked Product | - | 2 | 5.8 | Without Interference | Without Interference | Without Interference | Without Interference | |
136.40 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 0.1 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 9 | 100 | 6 | 40 | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | ±0.005 | Stocked Product | - | 2 | 5.8 | Without Interference | Without Interference | Without Interference | Without Interference | |
72.86 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 0.2 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 9 | 100 | 6 | 40 | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | ±0.005 | Stocked Product | - | 2 | 5.8 | Without Interference | Without Interference | Without Interference | Without Interference | |
136.40 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 0.3 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 9 | 100 | 6 | 40 | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | ±0.005 | Stocked Product | - | 2 | 5.8 | Without Interference | Without Interference | Without Interference | Without Interference | |
155.20 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 0.5 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 9 | 100 | 6 | 40 | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | ±0.005 | Stocked Product | - | 2 | 5.8 | Without Interference | Without Interference | Without Interference | Without Interference | |
136.40 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 1 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[○] / Copper Alloy[○] | 9 | 100 | 6 | 40 | Flat Surface / Side Surface / Curved Surface / Nut / Inclined Cutting | ±0.005 | Stocked Product | - | 2 | 5.8 | Without Interference | Without Interference | Without Interference | Without Interference |
Loading...
Spezifikationen
Model Number
TSC-CR-PEM4LB (Stocked Product)
| Outer Diameter D |
Length Under Neck ℓ1 |
Radius R |
Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Shank Diameter d |
Actual Effective Length Depends on Work Inclination Angle | Figure | |||
| 30' | 1° | 2° | 3° | ||||||||
| 1 |
3
|
0.05 0.1 0.2 0.3
|
1.5
|
0.95
|
50
|
4
|
3.14
|
3.30
|
3.66
|
4.12
|
1 |
|
4
|
4.19
|
4.40
|
4.88
|
5.49
|
|||||||
|
5
|
5.24
|
5.49
|
6.10
|
6.87
|
|||||||
|
6
|
6.28
|
6.59
|
7.32
|
8.24
|
|||||||
|
8
|
8.38
|
8.79
|
9.76
|
10.98
|
|||||||
|
10
|
10.47
|
10.99
|
12.21
|
13.73
|
|||||||
|
12
|
12.57
|
13.19
|
14.65
|
16.48
|
|||||||
| 1.2 |
5
|
0.1 0.2 0.3
|
1.8
|
1.15
|
50
|
4
|
5.24
|
5.49
|
6.10
|
6.87
|
1 |
|
10
|
10.47
|
10.99
|
12.21
|
13.73
|
|||||||
|
15
|
15.71
|
16.48
|
18.31
|
20.60
|
|||||||
| 1.5 |
6
|
0.1 0.5
|
2.3
|
1.45
|
50
|
4
|
6.28
|
6.59
|
7.32
|
8.24
|
1 |
|
12
|
12.57
|
13.19
|
14.65
|
16.48
|
|||||||
|
16
|
16.75
|
17.58
|
19.53
|
21.97
|
|||||||
|
6
|
0.2 0.3
|
6.28
|
6.59
|
7.32
|
8.24
|
||||||
|
8
|
8.38
|
8.79
|
9.76
|
10.98
|
|||||||
|
10
|
10.47
|
10.99
|
12.21
|
13.73
|
|||||||
|
12
|
12.57
|
13.19
|
14.65
|
16.48
|
|||||||
|
16
|
16.75
|
17.58
|
19.53
|
21.97
|
|||||||
| 2 |
8
|
0.1 0.3
|
3
|
1.95
|
50
|
4
|
8.38
|
8.79
|
9.76
|
10.98
|
1 |
|
12
|
12.57
|
13.19
|
14.65
|
16.48
|
|||||||
|
16
|
16.75
|
17.58
|
19.53
|
Without Interference
|
|||||||
|
20
|
70
|
20.94
|
21.98
|
24.41
|
Without Interference
|
||||||
|
24
|
25.13
|
26.38
|
Without Interference
|
Without Interference
|
|||||||
|
8
|
0.2 0.5
|
3
|
1.95
|
50
|
4
|
8.38
|
8.79
|
9.76
|
10.98
|
1 | |
|
10
|
10.47
|
10.99
|
12.21
|
13.73
|
|||||||
|
12
|
12.57
|
13.19
|
14.65
|
16.48
|
|||||||
|
14
|
14.66
|
15.39
|
17.09
|
19.22
|
|||||||
|
16
|
16.75
|
17.58
|
19.53
|
Without Interference
|
|||||||
|
20
|
70
|
20.94
|
21.98
|
24.41
|
Without Interference
|
||||||
|
24
|
25.13
|
26.38
|
Without Interference
|
Without Interference
|
|||||||
| 2.5 |
15
|
0.1 0.2 0.3 0.5
|
3.7
|
2.4
|
50
|
4
|
15.71
|
16.48
|
18.31
|
Without Interference
|
1 |
|
20
|
70
|
20.94
|
21.98
|
Without Interference
|
Without Interference
|
||||||
|
30
|
31.41
|
32.97
|
Without Interference
|
Without Interference
|
|||||||
| 3 |
16
|
0.1 0.2 0.3 0.5 1
|
4.5
|
2.9
|
70
|
6
|
16.75
|
17.58
|
19.53
|
21.97
|
1 |
|
20
|
20.94
|
21.98
|
24.41
|
27.46
|
|||||||
|
25
|
26.18
|
27.47
|
30.51
|
Without Interference
|
|||||||
|
30
|
31.41
|
32.97
|
36.62
|
Without Interference
|
|||||||
|
40
|
100
|
41.88
|
43.96
|
Without Interference
|
Without Interference
|
||||||
| 4 |
16
|
0.1 0.2 0.5 1
|
6
|
3.8
|
50
|
6
|
16.75
|
17.58
|
19.53
|
Without Interference
|
1 |
|
20
|
70
|
20.94
|
21.98
|
24.41
|
Without Interference
|
||||||
|
30
|
31.41
|
32.97
|
36.62
|
Without Interference
|
|||||||
|
40
|
100
|
41.88
|
43.96
|
Without Interference
|
Without Interference
|
||||||
| 5 |
25
|
0.1 0.2 0.3 0.5 1
|
7.5
|
4.8
|
70
|
6
|
26.18
|
27.47
|
Without Interference
|
Without Interference
|
1 |
|
35
|
100
|
36.65
|
Without Interference
|
Without Interference
|
Without Interference
|
||||||
| 6 |
30
|
0.1 0.2 0.3 0.5 1
|
9
|
5.8
|
70
|
6
|
Without Interference
|
Without Interference
|
Without Interference
|
Without Interference
|
2 |
|
40
|
100
|
Without Interference
|
Without Interference
|
Without Interference
|
Without Interference
|
||||||
Model Number
LN-TSC-CR-EM4S (Manufactured Product)
| Outer Diameter D |
Radius R |
Length Under Neck ℓ1 1 mm Increment Designation |
Flute Length ℓ |
Under Neck Diameter d1 |
Overall Length L |
Shank Diameter d |
Figure |
| 2 | 0.5 | 9 ~ 21 | 4 | 1.95 | 40 | 4 | 3 |
| 3 | 0.5 | 11 ~ 21 | 6 | 2.9 | 45 | 6 | 3 |
| 4 | 0.5 | 13 ~ 23 | 8 | 3.8 | 45 | 6 | 3 |
| 5 | 0.5 | 17 ~ 25 | 12 | 4.8 | 45 | 6 | 3 |
[ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the points below differ when ordering a stocked product.
(1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number.(3) The order for specifying the "length under neck" and "radius" is the opposite from that of stocked products.
For Cutting Conditions, Refer to >>Click here.
Weitere Informationen
● Radius (R) accuracy is of high quality at ±5 μm (compared to our other products), allowing for high-precision deep groove machining to be achieved.
● It adopts a 4-flute shape to allow higher feed configurations compared to machining with 2-flute models. 
Grundlegende Informationen
| Number of Flutes(sheet) | 4 | Model | Long Neck Radius | Coating | For High Hardness (Silicone-Based) |
|---|---|---|---|---|---|
| Torsion Angle (θ) | Standard Helix (30 to 40°) |
Konfigurieren
Basiseigenschaften
-
Outer Diameter (D)(φ)
-
R Size(mm)
-
Work Material
- General Steel
- Heat-Treated Steel
- High-Hardness Steel ~ HRC55
- Edelstahl
- Gusseisen
- Aluminum Alloy
- Copper Alloy
-
Flute Length (ℓ)(mm)
-
Overall Length (L)(mm)
-
Shank Diameter (d)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Processing Applications
- Flat Surface
- Side Surface
- Curved Surface
- Nut
- Inclined Cutting
-
R Precision(μm)
-
Additional Classification
- Manufactured Product
- Stocked Product
-
#6
-
Ausführung
- LN-TSC-CR-EM4S
- TSC-CR-PEM4LB
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
- 8 Tage oder weniger
- 13 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.