Carbide Square End Mill for Aluminum Machining, 3-Flute / Stub, Slim Shank Model (Teilenummern)
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
- Mengenrabatt
- Non-Coated
- Aluminum
- 3 Flutes
- B (Stub)
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
Teilenummer
|
|---|
| SEC-SS-ALHEM3B6.2 |
| SEC-SS-ALHEM3B8.2 |
| SEC-SS-ALHEM3B10.2 |
| SEC-SS-ALHEM3B12.2 |
| SEC-SS-ALHEM3B16.2 |
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | |
|---|---|---|---|---|---|---|---|---|
72.20 € | 1 | Verfügbar | 5 Arbeitstage | 6.2 | 9 | 6 | 80 | |
107.27 € | 1 | Verfügbar | 5 Arbeitstage | 8.2 | 12 | 8 | 100 | |
127.70 € | 1 | Verfügbar | 5 Arbeitstage | 10.2 | 15 | 10 | 130 | |
140.36 € | 1 | Verfügbar | 5 Arbeitstage | 12.2 | 18 | 12 | 150 | |
338.16 € | 1 | Verfügbar | 5 Arbeitstage | 16.2 | 24 | 16 | 180 |
Loading...
Spezifikationen
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | |
| Outer Diameter D |
|||||
| SEC-SS-ALHEM3B | 6.2 | 9 | 80 | 6 | 2 |
| 8.2 | 12 | 100 | 8 | 2 | |
| 10.2 | 15 | 130 | 10 | 2 | |
| 12.2 | 18 | 150 | 12 | 2 | |
| 16.2 | 24 | 180 | 16 | 2 |
For Cutting Conditions, Refer to >>Click here.
Weitere Informationen
● Adopts a sharp cutting edge that prevents the built-up edge that is unique to aluminum.
● The shank relief also makes it suitable in cases where tool interference may be an issue.
● The corners of the blade tip are slightly rounded to prevent chipping when cutting.
● The rounded edge of the blade rear end suppresses machining streaks caused by multi-stage machining of side surfaces. (SEC-LS-ALHEM3B Characteristics)
● The unique tip pocket shape allows for the cutting of grooves to be achieved with 2 flutes in parallel at the cutting depth. (SEC-SS-ALHEM3B Characteristics)
● It adopts a 3-flute shape to be strong against chatter and is capable of high-speed, high-efficiency machining of grooves. (SEC-SS-ALHEM3B Characteristics)
Grundlegende Informationen
| Work Material | Aluminum Alloy / Copper Alloy / Graphit / Kunststoff | Number of Flutes(sheet) | 3 | Model | Quadratisch |
|---|---|---|---|---|---|
| Coating | Ohne Beschichtung | Processing Applications | Flat Surface / Side Surface / Nut / Inclined Cutting | Geometry | Ultra-Small R |
| Torsion Angle (θ) | Powerful Helix (45° to 60°) | Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 |
| ● Inventory Product □ Manufacturer Product | ● |
Konfigurieren
Basiseigenschaften
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Ausführung
- SEC-SS-ALHEM3B
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.