DLC Coated Carbide Roughing End Mill for Aluminum Machining, 3-Flute / Regular Model (Teilenummern)
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
- Mengenrabatt
- DLC
- Aluminum
- 3 Flutes
- R (Regular)
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Outer Diameter (D) (φ) | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Length Under Neck (ℓ1) (mm) | Additional Classification | Tolerance of OD (mm) | Figure | ● Inventory Product □ Manufacturer Product | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
67.07 € | 1 | Verfügbar | 5 Arbeitstage | 5 | 15 | 6 | 57 | - | Stocked Product | 0 ~ -0.048 | 1 | ● | |
60.44 € | 1 | Verfügbar | 5 Arbeitstage | 6 | 15 | 6 | 57 | - | Stocked Product | 0 ~ -0.058 | 2 | ● | |
79.58 € | 1 | Verfügbar | 5 Arbeitstage | 8 | 20 | 8 | 72 | - | Stocked Product | 0 ~ -0.058 | 2 | ● | |
107.99 € | 1 | Verfügbar | 5 Arbeitstage | 10 | 25 | 10 | 72 | - | Stocked Product | 0 ~ -0.070 | 2 | ● | |
160.28 € | 1 | Verfügbar | 5 Arbeitstage | 12 | 30 | 12 | 100 | - | Stocked Product | 0 ~ -0.070 | 2 | ● | |
165.07 € | 1 | Verfügbar | 5 Arbeitstage | 16 | 40 | 16 | 100 | - | Stocked Product | 0 ~ -0.070 | 2 | ● | |
235.32 € | 1 | Verfügbar | 5 Arbeitstage | 20 | 45 | 20 | 100 | - | Stocked Product | 0 ~ -0.084 | 2 | ● | |
- | 1 | 8 Arbeitstage | 6 | 15 | 6 | 57 | 20 ～ 39 | Standard Neck Relief | 0 ~ -0.058 | 2 | □ | ||
- | 1 | 8 Arbeitstage | 8 | 20 | 8 | 72 | 25 ～ 48 | Standard Neck Relief | 0 ~ -0.058 | 2 | □ | ||
- | 1 | 8 Arbeitstage | 10 | 25 | 10 | 72 | 30 ～ 42 | Standard Neck Relief | 0 ~ -0.070 | 2 | □ | ||
- | 1 | 8 Arbeitstage | 12 | 30 | 12 | 100 | 35 ～ 70 | Standard Neck Relief | 0 ~ -0.070 | 2 | □ | ||
- | 1 | 8 Arbeitstage | 16 | 40 | 16 | 100 | 50 ～ 68 | Standard Neck Relief | 0 ~ -0.070 | 2 | □ | ||
- | 1 | 8 Arbeitstage | 20 | 45 | 20 | 100 | 55 ～ 62 | Standard Neck Relief | 0 ~ -0.084 | 2 | □ |
Loading...
Spezifikationen
| Model Number | Flute Length ℓ |
Overall Length L |
Shank Diameter d |
Figure | |
| Outer Diameter D |
|||||
| DLC-ALRFR | 5 | 15 | 57 | 6 | 1 |
| 6 | 15 | 57 | 6 | 2 | |
| 8 | 20 | 72 | 8 | 2 | |
| 10 | 25 | 72 | 10 | 2 | |
| 12 | 30 | 100 | 12 | 2 | |
| 16 | 40 | 100 | 16 | 2 | |
| 20 | 45 | 100 | 20 | 2 |
For Cutting Conditions, Refer to >>Click here.
Weitere Informationen
● The DLC coating has excellent wear resistance and deposition resistant properties that make it ideal for machining aluminum.
● The wide pitch and shallow nicks allow the time taken for the rough machining of aluminum to be reduced.
● It has a 3-flute structure for wider chip pockets which discharges chips better, allowing for high-efficiency aluminum machining.
Grundlegende Informationen
| Work Material | Aluminum Alloy / Copper Alloy / Kunststoff | Number of Flutes(sheet) | 3 | Model | Schruppen |
|---|---|---|---|---|---|
| Coating | DLC | Processing Applications | Flat Surface / Side Surface / Nut / Inclined Cutting | Geometry | Ultra-Small R |
| Torsion Angle (θ) | Standard Helix (30 to 40°) |
Konfigurieren
Basiseigenschaften
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Additional Classification
- Standard Neck Relief
- Stocked Product
-
Ausführung
- DLC-ALRFR
- SN-DLC-ALRFR
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
- 8 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.