Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Regular Model
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
-Da er eine Stirnnut hat, kann er gleichzeitig die Krümmung der Bohrung mit der Fräsfunktion korrigieren und die Oberflächenrauheit mit der Glättungsfunktion verbessern
-Direktes Reiben ist ohne Korrektur durch einen Schaftfräser nach dem Bohren einer Vorbohrung möglich
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
| Teilenummer | Mindestbestellmenge | Mengenrabatt | Tool Diameter (mm) | Groove Length (mm) | No. | Bottom Blade Shape | Diameter Tolerance (mm) | Shank Diameter d (mm) | Number of Flutes (Sheet(s)) | Overall Length L (mm) | Neck Length (ℓ1) (mm) | Number of Flutes | Length Under Neck ℓ2 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 8 Arbeitstage | 0.3 ～ 2.995 | 0.5 ～ 15 | 3 | F (Flat) / T (Center Dented) | 0 ~ 0.003 | 3 | 2 | 40 | - | 2 | - | ||
| 1 | 8 Arbeitstage | 2.005 ～ 3.995 | 0.5 ～ 20 | 4 | F (Flat) / T (Center Dented) | 0 ~ 0.003 | 4 | 2 | 50 | - | 2 | - | ||
| 1 | 8 Arbeitstage | 3.005 ～ 5.995 | 3 ～ 24 | 6 | F (Flat) / T (Center Dented) | 0 ~ 0.003 | 6 | 4 | 60 | - | 2 ～ 4 | - | ||
| 1 | 8 Arbeitstage | 2 ～ 2.995 | 0.5 ～ 15 | 3 | F (Flat) / T (Center Dented) | 0 ~ 0.003 | 3 | 2 | 40 | 5 ～ 20 | 2 | ℓ + ℓ1 ≦ 20 | ||
| 1 | 8 Arbeitstage | 2 ～ 3.995 | 0.5 ～ 20 | 4 | F (Flat) / T (Center Dented) | 0 ~ 0.003 | 4 | 2 | 50 | 5 ～ 20 | 2 | ℓ + ℓ1 ≦ 25 | ||
| 1 | 8 Arbeitstage | 3.005 ～ 5.995 | 3 ～ 24 | 6 | F (Flat) / T (Center Dented) | 0 ~ 0.003 | 6 | 4 | 60 | 5 ～ 20 | 2 ～ 4 | ℓ + ℓ1 ≦ 35 | ||
| 1 | 8 Arbeitstage | 0.3 ～ 2.995 | 0.5 ～ 15 | 3 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 3 | 2 | 40 | - | 2 | - | ||
| 1 | 8 Arbeitstage | 2.005 ～ 3.995 | 0.5 ～ 20 | 4 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 4 | 2 | 50 | - | 2 | - | ||
| 1 | 7 Arbeitstage | 3.005 ～ 5.995 | 3 ～ 26 | 6 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 6 | 4 | 60 | - | 2 ～ 4 | - | ||
| 1 | 7 Arbeitstage | 4.005 ～ 7.995 | 4 ～ 28 | 8 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 8 | 4 | 60 | - | 2 ～ 4 | - | ||
| 1 | 7 Arbeitstage | 6.005 ～ 9.995 | 5 ～ 35 | 10 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 10 | 4 | 80 | - | 2 ～ 4 | - | ||
| 1 | 7 Arbeitstage | 8.005 ～ 11.995 | 6 ～ 36 | 12 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 12 | 4 | 80 | - | 2 ～ 4 | - | ||
| 1 | 7 Arbeitstage | 10.005 ～ 15.995 | 8 ～ 48 | 16 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 16 | 4 | 100 | - | 2 ～ 4 | - | ||
| 1 | 8 Arbeitstage | 2 ～ 2.995 | 0.5 ～ 15 | 3 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 3 | 2 | 40 | 5 ～ 20 | 2 | ℓ + ℓ1 ≦ 20 | ||
| 1 | 8 Arbeitstage | 2 ～ 3.995 | 0.5 ～ 20 | 4 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 4 | 2 | 50 | 5 ～ 20 | 2 | ℓ + ℓ1 ≦ 25 | ||
| 1 | 8 Arbeitstage | 3.005 ～ 5.995 | 3 ～ 24 | 6 | F (Flat) / T (Center Dented) | 0 ~ 0.005 | 6 | 4 | 60 | 5 ～ 20 | 2 ～ 4 | ℓ + ℓ1 ≦ 35 |
Loading...
Spezifikationen
| Model Number | Number of Flutes (Selection) | Blade Diameter D 0.005 mm Increment Designation | Blade Length ℓ 0.5 mm Increment Designation | Bottom Blade Shape (Selection) | Overall Length L | Shank Diameter d | |
| No. | |||||||
| SEC-RMSC SEC-HP-RMSC (No.3 ~ No.6 only can be designated) | 3 | 2 | 0.300 ~0.495 | 0.5 ~1.0 | T (Dished) F (Flat) | 40 | 3 |
| 3 | 2 | 0.500 ~1.500 | 0.5 ~5.0 | 40 | 3 | ||
| 3 | 2 | 1.505 ~2.000 | 0.5 ~ 10.0 | 40 | 3 | ||
| 3 | 2 | 2.005 ~2.995 | 0.5 ~ 15.0 | 40 | 3 | ||
| 4 | 2 | 2.005 ~3.995 | 0.5 ~ 20.0 | 50 | 4 | ||
| 6 | 2 4 | 3.005 ~5.995 | 3.0 ~ 24.0 | 60 | 6 | ||
| 8 | 4.005 ~7.995 | 4.0 ~ 28.0 | 60 | 8 | |||
| 10 | 6.005 ~9.995 | 5.0 ~ 35.0 | 80 | 10 | |||
| 12 | 8.005 ~ 11.995 | 6.0 ~ 36.0 | 80 | 12 | |||
| 16 | 10.005 ~ 15.995 | 8.0 ~ 48.0 | 100 | 16 |
| Model Number | Number of Flutes (Selection) | Blade Diameter D 0.005 mm Increment Designation | Blade Length ℓ 0.5 mm Increment Designation | Neck Length ℓ1 1 mm Increment Designation | Bottom Blade Shape (Selection) | Length Under Neck Specified Range ℓ2 | Overall Length L | Shank Diameter d | |
| No. | |||||||||
| SEC-RMSCZ SEC-HP-RMSCZ | 3 | 2 | 2.000 ~ 2.995 | 0.5 ~ 15.0 | 5 ≤ ℓ1 ≤ 20 | T (Dished) F (Flat) | ℓ + ℓ1 ≤ 20 | 40 | 3 |
| 4 | 2 | 2.000 ~ 3.995 | 0.5 ~ 20.0 | ℓ + ℓ1 ≤ 25 | 50 | 4 | |||
| 6 | 2 4 | 3.005 ~ 5.995 | 3.0 ~ 24.0 | ℓ + ℓ1 ≤ 35 | 60 | 6 |
For Cutting Conditions, Refer to >>Click here.
Optionen
| Model Number | Coating Addition |
| SEC-RMSC | ○ |
| SEC-RMSCZ | ○ |
| SEC-HP-RMSC | - |
| SEC-HP-RMSCZ | - |
Coating
How to Order / Charge Details >>Click here.
Grundlegende Informationen
| Shank type | Schaftfräserschaft | Work Material | General Steel / Heat-Treated Steel / Edelstahl / Gusseisen / Aluminium / Kupfer | Coating Presence | None |
|---|---|---|---|---|---|
| Groove Shape | Gerade | Base-Blade Availability | Included | Tool Material Type | Carbide |
Konfigurieren
Basiseigenschaften
-
Tool Diameter(mm)
-
Groove Length(mm)
-
No.
- 3
- 4
- 6
- 8
- 10
- 12
- 16
-
Bottom Blade Shape
- F (Flat)
- T (Center Dented)
-
Diameter Tolerance(mm)
-
Shank Diameter d(mm)
-
Number of Flutes(Sheet(s))
- 2
- 4
-
Overall Length L(mm)
-
Neck Length (ℓ1)(mm)
-
Number of Flutes
-
Ausführung
- SEC-HP-RMSC
- SEC-HP-RMSCZ
- SEC-RMSC
- SEC-RMSCZ
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 7 Tage oder weniger
- 8 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.