Laser-Halter Rund
[Features]
· F20 sandwiches the laser between three screws. The optical axis is adjusted by screwing in and out.
· With F21, in addition to the function of F20, it is possible to adjust in the θy direction by operating the screw at the bottom of the holder.
· Both F20 and F21 have two types, L=150 and 250, depending on the length of the laser.
· The included standard rod has a diameter of ø20 and a length of 60, but both the rod diameter and length can be changed upon request.
· The laser holding part can be fixed to positions at 50 mm intervals by removing the fixing screw from the bottom (only F20-150/250).
· The F20 can be attached directly to the breadboard (A65) by removing the rod.
· F20 sandwiches the laser between three screws. The optical axis is adjusted by screwing in and out.
· With F21, in addition to the function of F20, it is possible to adjust in the θy direction by operating the screw at the bottom of the holder.
· Both F20 and F21 have two types, L=150 and 250, depending on the length of the laser.
· The included standard rod has a diameter of ø20 and a length of 60, but both the rod diameter and length can be changed upon request.
· The laser holding part can be fixed to positions at 50 mm intervals by removing the fixing screw from the bottom (only F20-150/250).
· The F20 can be attached directly to the breadboard (A65) by removing the rod.
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
Loading...
Konfigurieren
Basiseigenschaften
-
Höhe des Halters(mm)
-
Arbeitsweg
- ±3°
-
Länge L(mm)
- 150
- 250
-
Ausführung
- F20
- F21
-
Filtern nach CAD Format
- 2D
- 3D
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
- 10 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.