Filterhalter (Blockform)
[Features]
· A holder for setting filters with diameters of ø15 mm or ø20 mm.
· The optical axis height is standardized at 25 mm from the bottom.
· Can be fitted with two filters.
· Fix by loosening the clamp and sliding the holding part backwards or forwards in line with the thickness of the filter.
· Filters with a thickness of up to 4 mm are supported.
· The bottom plate features an M4 tapped hole. Mount a rod to change to a rod type.
· The F561-20 can also be used as a simplified polarizing element holder by directly turning the element.
· A holder for setting filters with diameters of ø15 mm or ø20 mm.
· The optical axis height is standardized at 25 mm from the bottom.
· Can be fitted with two filters.
· Fix by loosening the clamp and sliding the holding part backwards or forwards in line with the thickness of the filter.
· Filters with a thickness of up to 4 mm are supported.
· The bottom plate features an M4 tapped hole. Mount a rod to change to a rod type.
· The F561-20 can also be used as a simplified polarizing element holder by directly turning the element.
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
Konfigurieren
Basiseigenschaften
-
Passender Filterdurchmesser(φ)
- 15
- 20
-
Ausführung
- F561
-
Filtern nach CAD Format
- 2D
- 3D
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
- 10 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.