• Marken
  • Unternehmen
  • Kontakt
DE
TYPENCODE Suche | *NOT READY*
#CODE
Suchwort-Vorschlag
Vorgeschlagene Teilenummer
Auslaufprodukte

LW.A - Maschinenfüße mit Schwingungsdämpfung -Fußteller und Verstellspindel (415131)

LW.A - Maschinenfüße mit Schwingungsdämpfung -Fußteller und Verstellspindel 415131
  • Mengenrabatt

ELESA

ELESA

Produktdetails:

Hersteller-Teilenummer: 415131

Marke: ELESA

Preis: 112.92 €

Lieferzeit: 1 Arbeitstag


Technische Daten:

D: 160

D1: 150

d: M20x1.5

d2: 130

L: 188


Datenblatt

Teilenummer

Hier finden Sie die Teilenummern
zu dem gesuchten Artikel

415131

LW.A / Vibration-damping Levelling Elements, Steel Base and Stem

Features

ELESA vibration-damping levelling elements have been designed to damp vibrations, shocks and noises produced by moving bodies or non-balanced vibrating masses of equipment and machines which can cause:
- malfunctioning and reduction of the machine lifespan and/or of the adjacent ones;
- damage to operator's health;
- noise.

Material

Base

Zinc-plated steel.

Damping Element

NR rubber, hardness 80 Shore A, black colour, matte finish.

Levelling Plate

Zinc-plated steel.

Packing Ring

NBR synthetic rubber O-Ring.

Threaded Stem

Zinc-plated steel, supplied not assembled.

Nut and Washer

Zinc-plated steel.

Specifications


CodeDescriptionDdD1LL1
min÷max		ll1d2sMax. limit static load
[N]		Stiffness
[N/mm]		Max. deflection
[mm]		Weight
415111LW.A-80-M12x1.25x12080M12 x 1.257213335÷4618.532607x7500025002530
415121LW.A-120-M16x1.5x130120M16 x 1.510914440÷512336.5809x91000040002.51200
415131LW.A-160-M20x1.5x170160M20 x 1.515018850÷632943.513012x122000090002.22650
415141LW.A-200-M20x1.5x170200M20 x 1.518619860÷733654.513012x1240000150002.74500

Assembly Instructions

- Put the base of the vibration-damping element under the machine and insert the stem through the hole (not threaded) in the frame of the machine (fig.1)
- Turn the square end of the stem to take the levelling plate in contact with the machine thus obtaining the levelling required. Then lock with nut and washer (fig.2)

Technical Data and Guidelines for the Choice

1. Basic data required:
- disturbing frequency: the frequency of the disturbing vibration produced by a on-duty machine. In general, it is obtained by the number of rotations of the engine [Hz=r.p.m./60];
- the load applied to every single vibration-damping element [N];
- the isolation degree required [%];
- the deflection value of the vibration-damping element under a given load [mm];
- the rigidity, that is to say the load that applied to the vibration-damping element produces a deflection of 1.0 mm [N/mm].
2. How to choose the vibration-damping element:
- with reference to the diagram for checking the isolation degree, intersect the disturbing frequency value with the isolation degree required (each isolation degree corresponds to a line in the diagram) and define the deflection [in mm];
- divide the load applied onto the vibration-damping element by the deflection value to obtain the required rigidity of the vibration-damping element;
- compare the rigidity obtained with the rigidity shown in the table and choose the vibration-damping element which presents the nearest value (lower) to the calculated one.
3. Check:
- the deflection of the vibration-damping element chosen can be obtained in the graph on the basis of the load;
- intersect the disturbing frequency value with the vibration-damping element deflection value in the diagram to obtain the isolation degree offered by the vibration-damping element chosen;
- compare the obtained value with the isolation degree required.
4. Example:
Conditions of use: disturbing frequency = 50 Hz (3,000 r.p.m.); load applied to every levelling element = 4,000 N; a 80% isolation degree is required;
- diagram shows that with a 50 Hz disturbing frequency and an isolation degree of 80%, the deflection obtained is 0.6 mm;
- divide the load applied by the deflection obtained to define the rigidity required, which is 4,000/0.6= 6,666 N/mm;
- compare the rigidity value obtained (6,666 N/mm) with the values reported in the table. This value is within the rigidity value reported in the table for LW.A-120 (4,000 N/mm) and LW.A-160 (9,000 N/mm). Choose the vibration-damping element with the lower value that is LW.A-120.
For a further check:
- graph shows that LW.A-120 (4,000 N/mm) deflection is 1mm.
- by intersecting the deflection value with the disturbing frequency of 50 Hz in the diagram, the isolation degree obtained is 90%.
This value is even greater than the required one; your choice has proved to be correct.

Daten, die angezeigt werden sollen
30
45
60
  1. 1
Teilenummer
415131
Teilenummer
Standard-Stückpreis
MindestbestellmengeMengenrabatt
Reguläre
Versanddauer
?
D D1 d d2 L l l1 L1 min÷max s Max. Ruhebelastung
(N) 		Max. Dämpfung
(mm) 		Steifheit
(N/mm) 		Gewindeschraube Code Beschreibung

112.92 €

1 Verfügbar 1 Arbeitstag 160150M20x1.51301882943.550÷6312x12200002.29000M20415131LW.A-160-M20x1.5x170

Loading...

  1. 1
 

Grundlegende Informationen

Werkstoff Gummi - Stahl

Sie befinden sich auf der Seite für LW.A - Maschinenfüße mit Schwingungsdämpfung -Fußteller und Verstellspindel, die Teilenummer ist 415131.
Sie finden detaillierte Informationen über Spezifikation und Dimensionierung unter der Teilenummer 415131.

Konfigurieren

Zurücksetzen

1Vorgeschlagene Teilenummer

Teilenummern anzeigen

Einige Spezifikationen sind bisher nicht festgelegt.
Die Teilenummer wurde erkannt.

Basiseigenschaften

Filtern nach vsl. Lieferzeit

    • Alle Produkte
    • 1 Tag oder weniger
    • 4 Tage oder weniger
    • 25 Tage oder weniger

    Zurücksetzen

Optionale Eigenschaften

Produktvarianten

Teilenummer
415111
415121
415141
TeilenummerStandard-StückpreisMindestbestellmengeMengenrabattReguläre
Versanddauer
?		D D1 d d2 L l l1 L1 min÷max s Max. Ruhebelastung
(N) 		Max. Dämpfung
(mm) 		Steifheit
(N/mm) 		Gewindeschraube Code Beschreibung

41.23 €

1 Verfügbar 25 Arbeitstage 8072M12x1.256013318.53235÷467x7500022500M12415111LW.A-80-M12x1.25x120

65.58 €

1 Verfügbar 4 Arbeitstage 120109M16x1.5801442336.540÷519x9100002.54000M16415121LW.A-120-M16x1.5x130

196.64 €

1 Verfügbar 1 Arbeitstag 200186M20x1.51301983654.560÷7312x12400002.715000M20415141LW.A-200-M20x1.5x170

Technischer Support

Technische Anfrage

Bezahlverfahren

  • Rechnung
  • Vorauskasse
  • PayPal

On-Demand-Fertigung

Ansicht ändern

Zertifikate

  • ISO-9001
  • ISO-14001
  • AEO Certification
  • RoHS
  • REACH

MISUMI weltweit

Social Media

Rechtliche Hinweise

Copyright © MISUMI Corporation All Rights Reserved.