Nylon-Steckverbinder

?* Informationen zur Lieferzeit

• • Empfehlung

  

  Easy-Connect-Steckverbinder für industrielle Geräte – XN2

  OMRON

  [Features]
  · A simple wire connection connector that is compliant with e-con specifications and is suitable for sensor connections.
  · Utilizes a spring clamp method, which has a solid track record for wire connections in industrial uses.
  · Wire connections are simple and do not require special tools.
  · Repeat wire connections (repairs) are also possible.
  · The 28–20 AWG (0.08–0.5 mm²) wiring range can be supported with a single connector (cover OD: ⌀1.5 or smaller).

  • Mengenrabatt

  ab∗ ：	3.38 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Empfehlung

  

  Serie D3000

  TE Connectivity

  
  The D-3000 series, compatible with a wide range of dynamic main series sizes.
  
  [Features]
  · Terminal construction resistant to tampering: developed by the automobile industry, a recess tab box construction concept (3-point contact) is used that is difficult to pry apart. These tough contacts offer high reliability and stability in a real work environment.
  · Three types of plating: Select the type of plating best suited for the job and optimize cost performance. Tin plating is suitable for normal use with a low insertion/extraction frequency; 0.38 μm gold plating for frequent insertion and extractions; and 0.76 μm gold plating is suited for use in an even harsher environment.
  · Two types of connection point pressure: Two contact point pressures are available in order to propose a contact environment optimal for the specific type of use. Standard connection point pressure products are for insertion/extraction durability and multiple pin use, and high connection point pressure products are for uses involving strong vibration. These two types can be used separately.
  · High current: Maximum 15 A of regular current (with a temperature elevation of less than 30°C) can be used regardless of size.
  · Newly developed copper alloy material realized with a reliable 3-point contact construction.
  · Lock filling: A clear locking sound and vibration are produced when mating, allowing workers to be sure mating has been successfully completed even in environments with low visibility.
  · Keying: A slit in the housing is provided so that improper unions can be prevented by distinguishing X keys from Y keys. If a keying plug is used, further key patterns may be created.

  • Mengenrabatt

  CAD ：

  2D

  ab∗ ：	1.23 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Serie D1000

  TE Connectivity

  The D-1000 Series are the smallest connectors within the Dynamic Series range.
  
  [Features]
  [Supports a wide range of wires]
  · This connector offers an extensive range of wiring, and supports 30–18 AWG. The outer diameter of the wire coating is large at ⌀ 2.2 mm (when using the D-1200/D-1500 Series), which can also be used as standard on-board.
  [Crimp tool with interchangeable dies]
  · The die on this standard tool is interchangeable. This a single-handle system gives the die purchase for each range, which makes it possible to reduce lead time and minimize implementation costs.
  [A full Series lineup]
  · The 2.0-mm pitch D-1100 and 2.5-mm pitch D-1200 Series are available for selection depending on the wire sizes and the voltages that are used. The lineup includes a number of electrodes up to a maximum of 40 P.
  · The D-1500 Series lineup features 3.5-mm pitch products that are optimally suited for applications, such as bundling signal wires and branching power supplies.
  · The Series lineup includes different color versions in addition to the previous standard black color.
  · In addition to positively promoting the use of multiple electrodes of the same number, it also contributes to a reducing the amount of time required to assemble connectors.
  · The lineup includes more affordable tin plated products, as part of the terminal plating specifications, in addition to conventional products with standard gold plating.
  · Contact options support an extensive range of uses based on application, quality, and cost considerations.

  • Mengenrabatt

  CAD ：

  2D

  ab∗ ：	1.10 €
  Minimum Lieferzeit ：	3 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  EL-Steckverbinder【10-100 Stk. pro Packung】

  JST

  A small connector designed for smoother mating, even when prying open the contact housing.
  
  [Features]
  · A small connector with easy contact housing insertion.
  · Ideal for pry insertion when mating.
  · Arm lock mechanism with exceptional durability.
  · Contact for 2 wire crimping.
  · Compatible with an ML connector.

  • Mengenrabatt

  ab∗ ：	2.18 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  XH-Steckverbinder【1-50 Stk. pro Packung】

  JST

  Based on the high reliability and versatility of the NH series, this connector has been designed to be smaller, with a mounting height of 9.8 mm.

  • Mengenrabatt

  ab∗ ：	2.95 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Universal-Mate-N-Lok-Steckverbinder

  TE Connectivity

  Universal Mate-N-Lok conforms to UL and CSA standards.

  • Mengenrabatt

  ab∗ ：	1.16 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  CL-Steckverbinder【1-500 Stk. pro Packung】

  JST

  These are connectors that allow branching and short-circuit low resistance connections using simple tools such as pliers.
  
  [Features]
  ・ Insulation displacement connection is possible by simple operation.
  ・There is no need to strip the electrical wire sheathing when connecting.
  ・ No special tool is required. The internal contact (fork-shaped contact) is securely pressed against the electrical wire. The connection can be completed by simply clamping the connector body using pliers, etc.
  ・Superior insulation performance.
  ・Insulating the connecting section is not required.
  ・The pre-installed housing provides highly reliable insulating effectiveness.
  ・Mechanism for temporarily securing electrical wires.
  ・Includes a built-in mechanism for temporarily securing electrical wires to prevent wire-slip or connection errors when connecting wires.
  ・ Workability has been improved.

  • Mengenrabatt

  ab∗ ：	7.38 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  SM-Steckverbinder【1-1,000 Stk. pro Packung】

  JST

  This small-type relay connector is equipped with a panel lock mechanism, and offers high reliability with a smaller size, more dense design, and the use of micro-currents.
  
  [Features]
  ・This small-type relay connector with 2.5-mm pitch offers high reliability with a smaller size, more dense design, and the use of micro-currents.
  ・High contact pressure, dual contact.
  · Shell type housing.
  ・Applicable to a wide range of panels.
  ▪ Arm lock mechanism.

  • Mengenrabatt

  ab∗ ：	0.87 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Handelsüblicher Mate-N-Lok-Steckverbinder

  TE Connectivity

  Small, lightweight connector that can increase precision of equipment.

  • Mengenrabatt

  ab∗ ：	1.10 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Steckverbinder Serie DK 3000, 3,81/5,08 mm Rastermaß

  DDK

  [Features]
  • The DK-3000 series of connectors was developed for 3.81/5.08 mm-pitch industrial wire-to-wire and wire-to-board signal and power transmission. The series includes a diverse array of connectors.
  • Wiring is connected by crimping (or dip soldering for board-mounted types), making wire connection easy.
  • Connectors make a click sound when the housing locks, enabling the user to be sure the connection is secure.

  ab∗ ：	1.68 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Federsteckverbinder, Serie 734, 3,81 mm Rastermaß, Stecker

  WAGO

  The female side can be connected to 734-200 (3.81 mm pitch) series connectors with the male side of a spring type connector.

  ab∗ ：	4.07 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  X-COM-SYSTEM- und Serie 769-Steckverbinder

  WAGO

  The X-COM connector is a product for connecting between connector plugs and connector heads and terminal blocks. It enables connection between primary side terminal blocks and secondary side connectors, etc.

  ab∗ ：	3.86 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Steckverbinder mit seitlicher Feder, Stecker und Buchse, Serie 231, mit 7,5 mm Rastermaß, für Verbindungen mit Steckverbindern der Serie 731-600, entsprechende Platine für Verbindungen mit Steckverbindern der Serie 231-200/Serie 800.

  WAGO

  The male side can be connected to 731-600 series connectors with the female side of a spring-type connector, and the corresponding circuit board can be connected to 7.5 mm-pitch 231-200 series/800 series connectors.

  ab∗ ：	3.26 €
  Minimum Lieferzeit ：	13 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Serie BL 3,50【1-800 Stk. pro Packung】

  WEIDMÜLLER

  3.5mm pitch screw connection. It is a classic product.

  • Mengenrabatt

  ab∗ ：	2.67 €
  Minimum Lieferzeit ：	2 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Dyna-Klemmen-Kit: Kabelklemmen-Kit

  TE Connectivity

  4P type connector with sequential structure.

  • Mengenrabatt

  CAD ：

  2D

  ab∗ ：	15.28 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Steckverbinder für mehrere Gehäuse

  TE Connectivity

  I/O connector for human-machine interfaces.

  • Mengenrabatt

  ab∗ ：	7.59 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Mini-Universal-Mate-N-Lok-Steckverbinder【1-20 Stk. pro Packung】

  TE Connectivity

  Small connector that facilitates high density wiring inside equipment.

  • Mengenrabatt

  ab∗ ：	1.06 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  MATE-N-LOK-Steckverbinder für Starkstrom

  TE Connectivity

  These connectors are designed for high-current applications such as in refrigerators, freezers, air-conditioners, and microwave ovens.
  
  [Features]
  • These connectors are designed for high-current applications such as in refrigerators, freezers, air-conditioners, and microwave ovens.

  • Mengenrabatt

  ab∗ ：	1.48 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Gehäuse Serie CB01【10 Stk. pro Packung】

  SUMIKO TEC

  Small waterproof connector with 2.5-mm pitch. · Watertightness is secured by a retainer that pushes the contact into the built-in wire seal.
  
  [Features]
  · A small, highly reliable waterproof connector. Watertightness is secured by a retainer that pushes and holds the terminal into the wire seal that is built into the connector.
  · Two relay and circuit-board types are available. The circuit-board type is equipped with a reverse-insertion prevention boss.
  · Applications generally include electrical products that require waterproof performance. Such examples include: electronic appliances for bathtubs, washlet toilets, water heaters, industrial refrigerators, washing machines, water purifiers, and outdoor motors, etc.

  • Mengenrabatt

  ab∗ ：	7.82 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kabel-zu-Platine-Steckverbindergehäuse mit 6,5 mm Rastermaß (51142)

  MOLEX

  Molex terminals are completely protected by the housing's insulation wall. (Mating housings: 53721 / 53728, conforming terminals: 50597 / 51143 / 50598)

  • Mengenrabatt

  ab∗ ：	1.13 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Standard-Einschub-Steckverbinder

  TE Connectivity

  [Features]
  · 15 A, AC 250, standard drawer connector.
  · 50 per pack.

  • Mengenrabatt

  ab∗ ：	17.64 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Stecker-Stiftleiste mit Lötstiften/Serie 734, Kategorie 1/Gerade/3,5 mm Rastermaß

  WAGO

  [Features]
  　● Can be mounted directly to a printed circuit board using a solder pin.
  　● Maximum rated current of 10 A is possible using a 1 x 1 mm pin.
  　● Incorrect insertion is impossible.
  　● An accessory coding key can be attached.

  ab∗ ：	1.81 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Federsteckverbinder, Serie 231, 5 mm Rastermaß, Stecker

  WAGO

  The female side can be connected to 231-100 series connectors with the male side of a spring type connector. The corresponding circuit board can be connected to 232-100/200 series connectors.

  • Mengenrabatt

  ab∗ ：	3.81 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Federsteckverbinder, Serie 231, 5,08 mm Rastermaß, Buchse mit Schraube

  WAGO

  The male side can be connected to a 231-6**/109-000 series connector, and corresponding circuit board can be connected to a 231-***/108-000 series connector as well as 200 series connector using a female spring-type connector.

  ab∗ ：	14.22 €
  Minimum Lieferzeit ：	13 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Stecker-Stiftleiste mit Lötstift für Federsteckverbinder, Serie 231, 7,5 mm Rastermaß, Nennwert von 12 A

  WAGO

  Please select a 231-200 (7.5 mm pitch) series connector for the angle-type/female side spring-type circuit board connector. Pins are 1 mm and have a rated value of 12 A.

  ab∗ ：	2.87 €
  Minimum Lieferzeit ：	13 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Dynamischer pneumatischer Steckverbinder

  TE Connectivity

  Modular housing structure with maximum operating pressure 1.0 MPa.

  • Mengenrabatt

  ab∗ ：	4.60 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  RITS-Steckverbindersystem【1-36 Stk. pro Packung】

  TE Connectivity

  A “click” sound can be heard when latching while in the smart lock configuration. A connector that lets you easily make connections simply by pushing up with a general purpose tool.

  • Mengenrabatt

  CAD ：

  2D

  ab∗ ：	1.72 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  MINI-E/A-STECKVERBINDERSYSTEM FÜR INDUSTRIEANWENDUNGEN

  TE Connectivity

  [Features]
  A small, compact latch system with two configurations to prevent mis-mating.

  • Mengenrabatt

  ab∗ ：	5.83 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  EH-Steckverbinder【50-100 Stk. pro Packung】

  JST

  This connector has an ultra-thin design, in response to customers' needs for high-density mounting and increased freedom in circuit design of electronic equipment.

  • Mengenrabatt

  ab∗ ：	2.94 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  VH-Steckverbinder【50 Stk. pro Packung】

  JST

  This is a highly reliable small high-capacity connector for printed circuit boards, which enables a wide range of connections from signal circuits in consumer electronics, to power supply circuits and output circuits.

  • Mengenrabatt

  ab∗ ：	3.91 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Gehäuse Serie CL07【10 Stk. pro Packung】

  SUMIKO TEC

  A 5.8 mm pitch waterproof connector capable of handling large currents (max 10A). Three types of waterproof packing are available, providing waterproofing in a variety of sheath sizes. Waterproof packing required (sold separately). Parts with 3 cores or less (CL07D series) are waterproof; parts with 4 cores or more (CL07A series) are drip-proof.
  
  [Features]
  · A drip-proof connector used in environments where mist or droplets form on wires in refrigerated showcases, water heaters, etc.
  · Stable contacts provide for superior mechanical and electrical performance.

  • Mengenrabatt

  ab∗ ：	5.67 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Serie SMS, Nylon-Steckverbinder, kompakte, leichte und kostengünstige Ausführung

  SOURIAU

  SMS Series Nylon Connector, Compact, Lightweight, and Low Cost Type
  
  [Features]
  ▪ A nylon rectangular connector with compact and lightweight construction.
  ▪ "Panel mount type" for panel mounting, as well as "board mount type" and "inline board mount type" for board mounting are available, and support a broad range of uses in numerous fields.
  ▪ Designed so that coupling and removal can be performed easily and securely, by lightly opening and closing the latch on the plug-side with a finger.
  ▪ Additionally, the polarizing key for preventing incorrect insertion prevents incorrect coupling.

  • Mengenrabatt

  ab∗ ：	1.69 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Gitter-Steckverbinder

  TE Connectivity

  This connector has been developed for primary power source (conforms to IEC-950). 12 poles and 28 poles are available.
  
  [Features]
  ・This product has been developed as an I/O connector for copy machines and other OA equipment. 12 poles and 28 poles are available.
  ・The contacts are protected by the square-shaped housing, so it is designed to resist twisting.
  ・The contacts are made of highly conductive material, so high current can be used even though the size is small.
  ・Can also be used for very small currents (signal line). One type of contact is suitable for very low to high current.
  ・This contact has excellent past results. It is resistant to whisker formation and fretting corrosion.
  ・The housing lance method means there is no danger of contacts getting tangled or coming off the housing.
  ・Cable clamp ensures secure fixing of the cable.
  ・One-touch locking for reliable locking is highly regarded.
  ・Designed to prevent contacts colliding with each other.

  • Mengenrabatt

  ab∗ ：	10.84 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Federsteckverbinder, Serie 733, 2,5 mm Rastermaß, Buchse

  WAGO

  The male side can be connected to 733-200 series connectors with the female side of the mini type spring connector. The corresponding circuit board can be connected to 733-300 series connectors. Maximum wire size is 0.5 mm2.

  • Mengenrabatt

  ab∗ ：	2.81 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Federsteckverbinder, Serie 734, 3,5 mm Rastermaß, Buchse mit Verriegelungsmechanismus

  WAGO

  A Wago 734 Series female spring-type connector with locking mechanism to enable male-side connection to the 734–300 Series connectors. Compatible boards: 734–100/400 Series. An extremely compact connector.

  • Mengenrabatt

  ab∗ ：	3.09 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Federsteckverbinder, Serie 734, 3,81 mm Rastermaß, Buchse – kompakter Steckverbinder

  WAGO

  The male side can be connected to 734-300 series connector with the female side of a spring type connector, and the corresponding circuit board can be connected to 3.81 mm pitch 734-200 series/400 series connectors. It is a very compact connector.

  ab∗ ：	2.76 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Stecker-Stiftleiste für Federsteckverbinder mit Lötstiften, Serie 231, 7,5 mm Rastermaß, rechtwinklig, Nennwert 16 A

  WAGO

  Please select a 231-200 (7.5 mm pitch) series connector for the angle-type/female side spring-type circuit board connector. Pins are 1.6 mm and have a rated value of 16 A.

  ab∗ ：	2.87 €
  Minimum Lieferzeit ：	13 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Stecker-Stiftleiste mit Lötstift für Federsteckverbinder, Serie 231, mit Befestigungsschraube

  WAGO

  Please select a 231-3**/ 107-000 series connector for the straight-type/female side spring-type circuit board connector. Pins are 1 mm and have a rated value of 12 A.

  ab∗ ：	7.90 €
  Minimum Lieferzeit ：	13 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Stecker-Stiftleiste mit Lötstift für Federsteckverbinder, Serie 231, 5,08 mm Rastermaß

  WAGO

  Please select a 231-300 series connector for the straight-type/female side spring-type circuit board connector. Pins are 1 mm and have a rated value of 12 A.

  ab∗ ：	2.54 €
  Minimum Lieferzeit ：	13 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Relais-Steckverbinder (Schneidklemmen-Ausführung)【10 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  - A single male connector for connecting to a female.
  - Can be linked for use as multi-pole connectors.
  - No wire peeling necessary.
  [Use]
  - Male (M) and female (F) sides are coupled to enable wire connections and relays within devices.

  • Mengenrabatt

  ab∗ ：	5.00 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  PT-Steckverbinder【100 Stk. pro Packung】

  NICHIFU TERMINAL INDUSTRIES

  For equipment internal wiring. It is a connector that does not require special tools and is suitable for easy connection. (PT)

  • Mengenrabatt

  ab∗ ：	20.41 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  QLMC (Allzweck) Steckverbinder【30 Stk. pro Packung】

  NICHIFU TERMINAL INDUSTRIES

  [Features]
  · The cumbersome taping and crimping work of conventional methods is unnecessary.
  · Simply peel off the wire coating and insert into the connector.
  · Passed the heat resistance test as per Fire Department Notice No. 11 where a temperature of 380°C is reached after 15 minutes.
  · Lineup also includes polycarbonate materials for general purpose wires.
  · Uses a proven two-point contact spring structure.

  • Mengenrabatt

  ab∗ ：	14.98 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  SPTV-Steckverbinder【100 Stk. pro Packung】

  NICHIFU TERMINAL INDUSTRIES

  For equipment internal wiring. It is a connector that does not require special tools and is suitable for easy connection. (SPT)

  • Mengenrabatt

  ab∗ ：	28.82 €
  Minimum Lieferzeit ：	21 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Steckverbinder für Platten und kleine Netzschalter【500 Stk. pro Packung】

  NICHIFU TERMINAL INDUSTRIES

  Allows simultaneous mounting of multiple poles. The new locking mechanism provides reliable and secure connections.
  
  [Features]
  · Renders the cumbersome taping and crimping work of conventional methods unnecessary.
  ▪ Uses a 2 point contact spring structure.
  · Passed the heat resistance test from the Fire Department Notice No. 11, reaching the stipulated 380°C after 15 minutes.
  · Renders the cumbersome taping and crimping work of conventional methods unnecessary.
  · Simply peel off the wire coating and insert into the connector.
  · Passed the heat resistance test from the Fire Department Notice No. 11, reaching the stipulated 380°C after 15 minutes.
  · Polycarbonate types for general-purpose wires are also available.
  · Uses a tried-and-tested two-point contact spring structure

  Minimum Lieferzeit ：	auf Anfrage

• 

  Steckverbinder, Verbindungsstück【5-20 Stk. pro Packung】

  NICHIFU TERMINAL INDUSTRIES

  [Features]
  · Multi-wiring system for indoor wiring.
  · Electrical Appliance and Material Safety Law permitted product (PSE).
  · Easy branching by switching to a branched connection block.

  • Mengenrabatt

  ab∗ ：	12.60 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...