• Aufgrund des Taifuns in Japan / Tokio kann es bei einigen Produkten zu Lieferverzögerungen kommen. Wir bedanken uns für Ihr Verständnis.
  • Aus technischen Gründen ist eine Kreditkartenzahlung temporär nicht möglich. Wir bitten etwaige Unannehmlichkeiten zu entschuldigen.

Hartmetall-Kugelschaftfräser

Suche durch Präzisierung der Kategorie der unteren Klasse

Daten, die angezeigt werden sollen
30
45
60
Sortieren nach:
Lieferzeit
  • Alle Produkte
  • Versand am selben Tag
  • 3 Tag oder weniger
  • 4 Tag oder weniger
  • 5 Tag oder weniger
  • 6 Tag oder weniger
  • 7 Tag oder weniger
  • 8 Tag oder weniger
  • 9 Tag oder weniger
  • 10 Tag oder weniger
  • 13 Tag oder weniger
Warenzeichen
Artikelserie
ab
Minimum Lieferzeit
Spezifikationen
R Size(mm)
Type
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Coating
Overall Length (L)(mm)
Underneck length (ℓ1)(mm)
Shank diameter (d)(mm)
R Precision(μm)
Machining Application
  • Empfehlung

SHC Series Carbide Ball End Mill, for High-Hardness Steel Machining, 2-Flute / Long Neck Model

  • Empfehlung

XAL series carbide ball end mill, 2-flute / short model

    MSB230-MUGEN-BESCHICHTETER 2-schneidiger Kugelfräser

      MRBH230-Langhalskugel, hart (für hohe Härte)

        SSB200-CBN-Kugelschaftfräser, superschneller

          HSB, HM-beschichtete 2-schneidige Kugel

            MSBH230 2-schneidiger Kugelschaftfräser für hohe Härte

              2-schneidig, langer Hals, Kugelkopfausführung, (Kugelausführung für tiefe Rippen) WX-LN-EBD

                DIA-Beschichtet, 2-schneidig, langer Hals, Kugelkopfausführung DIA-LN-EBD

                  Hartmetall-Graphit-Vollmaterial-Kugelkopffräser, 2-schneidig, lange Ausführung

                    SBD2LA langer Kugelkopffräser, 2-schneidig, OK-beschichtet

                      Hochpräziser Kugelkopffräser, 2-schneidig, große Reichweite GF500B 3853

                        Wunder-Kugelkopffräse mit zwei Messern

                          TSC series carbide ball end mill (R accuracy ±3μm)

                            TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model

                              TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model

                                XAC series carbide ball end mill, 2-flute / short model

                                  XAC series carbide ball end mill, 2-flute / short, long shank model

                                    TSC series carbide ball end mill, short model

                                      TSC series carbide ball end mill, regular model

                                        TSC series carbide ball end mill, 2-flute / short, long shank model

                                          TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model

                                            TSC series carbide ball end mill, 3-flute / short model

                                              TSC series carbide ball end mill, 3-flute / regular model

                                                TSC series carbide ball end mill, short model

                                                  TSC series carbide ball end mill, 4-flute / regular model

                                                    Carbide ball end mill, 2-flute / short model

                                                      TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model

                                                        TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model

                                                          TSC series carbide long neck ball end mill, 2-flute / long neck model

                                                            TSC series carbide long neck ball end mill, 3-flute / long neck model

                                                              TSC series carbide long neck ball end mill, 4-flute / long neck model

                                                                TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade

                                                                  TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model

                                                                    TSC Series Carbide Ball End Mill (R Accuracy ±3μm), for High-Hardness Steel Machining, 2-Flute / Short Model

                                                                      TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model

                                                                        TSC Series Carbide Ball End Mill, For High-Hardness Steel Machining, 2-Flute / Short Model, Long Shank Model

                                                                          TSC Series Carbide Ball End Mill, For High-Hardness Steel Machining, 3-Flute / Short Model

                                                                            TSC Series Carbide Ball End Mill, For High-Hardness Steel Machining, 3-Flute / Regular Model

                                                                              TSC Series Carbide Ball End Mill, For High-Hardness Steel Machining, 4-Flute / Short Model

                                                                                TSC Series Carbide Ball End Mill, For High-Hardness Steel Machining, 4-Flute / Regular Model

                                                                                  TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 2-Flute / Tapered Neck Model

                                                                                    TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model

                                                                                      TSC Series Carbide Ball End Mill for Stainless Steel Machining, 2-Flute / Short Model

                                                                                        DLC Coated Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model

                                                                                        Warenzeichen

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        NS TOOL

                                                                                        NS TOOL

                                                                                        NS TOOL

                                                                                        UNION TOOL

                                                                                        NS TOOL

                                                                                        OSG

                                                                                        OSG

                                                                                        EIKOSHA

                                                                                        OKAZAKI SEIKO

                                                                                        GUHRING

                                                                                        CREATE TOOL

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        Artikelserie

                                                                                        SHC Series Carbide Ball End Mill, for High-Hardness Steel Machining, 2-Flute / Long Neck Model

                                                                                        XAL series carbide ball end mill, 2-flute / short model

                                                                                        MSB230-MUGEN-BESCHICHTETER 2-schneidiger Kugelfräser

                                                                                        MRBH230-Langhalskugel, hart (für hohe Härte)

                                                                                        SSB200-CBN-Kugelschaftfräser, superschneller

                                                                                        HSB, HM-beschichtete 2-schneidige Kugel

                                                                                        MSBH230 2-schneidiger Kugelschaftfräser für hohe Härte

                                                                                        2-schneidig, langer Hals, Kugelkopfausführung, (Kugelausführung für tiefe Rippen) WX-LN-EBD

                                                                                        DIA-Beschichtet, 2-schneidig, langer Hals, Kugelkopfausführung DIA-LN-EBD

                                                                                        Hartmetall-Graphit-Vollmaterial-Kugelkopffräser, 2-schneidig, lange Ausführung

                                                                                        SBD2LA langer Kugelkopffräser, 2-schneidig, OK-beschichtet

                                                                                        Hochpräziser Kugelkopffräser, 2-schneidig, große Reichweite GF500B 3853

                                                                                        Wunder-Kugelkopffräse mit zwei Messern

                                                                                        TSC series carbide ball end mill (R accuracy ±3μm)

                                                                                        TSC series carbide ball end mill (for shrink fit holder / R accuracy ±3 μm) 2-flute / stub model

                                                                                        TSC series carbide ball end mill, for shrinkage fitting, 2-flute / stub model

                                                                                        XAC series carbide ball end mill, 2-flute / short model

                                                                                        XAC series carbide ball end mill, 2-flute / short, long shank model

                                                                                        TSC series carbide ball end mill, short model

                                                                                        TSC series carbide ball end mill, regular model

                                                                                        TSC series carbide ball end mill, 2-flute / short, long shank model

                                                                                        TSC series carbide ball end mill, spherical, 2-flute / stub, long neck model

                                                                                        TSC series carbide ball end mill, 3-flute / short model

                                                                                        TSC series carbide ball end mill, 3-flute / regular model

                                                                                        TSC series carbide ball end mill, short model

                                                                                        TSC series carbide ball end mill, 4-flute / regular model

                                                                                        Carbide ball end mill, 2-flute / short model

                                                                                        TSC series carbide tapered neck ball end mill, 2-flute / tapered neck model

                                                                                        TSC series carbide tapered neck ball end mill, 3-flute / tapered neck model

                                                                                        TSC series carbide long neck ball end mill, 2-flute / long neck model

                                                                                        TSC series carbide long neck ball end mill, 3-flute / long neck model

                                                                                        TSC series carbide long neck ball end mill, 4-flute / long neck model

                                                                                        TS Coated Carbide Ball End Mill, Cutting Edge Rigidity Machining / For High-Hardness Steel Machining, 2-Flute / No Side Blade

                                                                                        TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model

                                                                                        TSC Series Carbide Ball End Mill (R Accuracy ±3μm), for High-Hardness Steel Machining, 2-Flute / Short Model

                                                                                        TSC Series Carbide Ball End Mill (for Shrink Fit Holder) for High-Hardness Steel Machining, 2-Flute / Stub Model

                                                                                        TSC Series Carbide Ball End Mill, For High-Hardness Steel Machining, 2-Flute / Short Model, Long Shank Model

                                                                                        TSC Series Carbide Ball End Mill, For High-Hardness Steel Machining, 3-Flute / Short Model

                                                                                        TSC Series Carbide Ball End Mill, For High-Hardness Steel Machining, 3-Flute / Regular Model

                                                                                        TSC Series Carbide Ball End Mill, For High-Hardness Steel Machining, 4-Flute / Short Model

                                                                                        TSC Series Carbide Ball End Mill, For High-Hardness Steel Machining, 4-Flute / Regular Model

                                                                                        TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 2-Flute / Tapered Neck Model

                                                                                        TSC Series Carbide Tapered Neck Ball End Mill, for High-Hardness Steel, 3-Flute / Tapered Neck Model

                                                                                        TSC Series Carbide Ball End Mill for Stainless Steel Machining, 2-Flute / Short Model

                                                                                        DLC Coated Carbide Ball End Mill for Aluminum Machining, 2-Flute / Short Model

                                                                                        ab

                                                                                        24.09 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        11.77 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        22.31 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        23.84 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        126.09 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        37.04 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        21.45 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        35.60 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        156.54 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        133.32 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        72.47 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        111.97 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        26.60 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        33.95 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        44.96 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        19.71 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        15.85 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        31.86 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        -

                                                                                        Mengenrabatt

                                                                                        -

                                                                                        Mengenrabatt

                                                                                        -

                                                                                        Mengenrabatt

                                                                                        -

                                                                                        Mengenrabatt

                                                                                        -

                                                                                        Mengenrabatt

                                                                                        -

                                                                                        Mengenrabatt

                                                                                        -

                                                                                        Mengenrabatt

                                                                                        -

                                                                                        Mengenrabatt

                                                                                        -

                                                                                        Mengenrabatt

                                                                                        26.10 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        -

                                                                                        Mengenrabatt

                                                                                        -

                                                                                        Mengenrabatt

                                                                                        -

                                                                                        Mengenrabatt

                                                                                        -

                                                                                        Mengenrabatt

                                                                                        68.92 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        41.98 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        36.09 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        19.61 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        51.11 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        -

                                                                                        Mengenrabatt

                                                                                        -

                                                                                        Mengenrabatt

                                                                                        -

                                                                                        Mengenrabatt

                                                                                        -

                                                                                        Mengenrabatt

                                                                                        26.01 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        -

                                                                                        Mengenrabatt

                                                                                        63.84 €

                                                                                        *Stückpreis Standardkonfiguration

                                                                                        Mengenrabatt

                                                                                        -

                                                                                        Mengenrabatt

                                                                                        Minimum Lieferzeit 3 Arbeitstage 3 Arbeitstage 4 Arbeitstage Versand am selben Tag 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 6 Arbeitstage 6 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage
                                                                                        Spezifikationen
                                                                                          • XAL
                                                                                          • General Steel
                                                                                          • 2 Flutes
                                                                                                                • TS
                                                                                                                • General Steel
                                                                                                                • 2 Flutes
                                                                                                                • S (Short)
                                                                                                                • TS
                                                                                                                • General Steel
                                                                                                                • 2 Flutes
                                                                                                                • B (Stub)
                                                                                                                • TS
                                                                                                                • General Steel
                                                                                                                • 2 Flutes
                                                                                                                • B (Stub)
                                                                                                                • TiAlN
                                                                                                                • General Steel
                                                                                                                • 2 Flutes
                                                                                                                • S (Short)
                                                                                                                • TiAlN
                                                                                                                • General Steel
                                                                                                                • 2 Flutes
                                                                                                                • TS
                                                                                                                • General Steel
                                                                                                                • 2 Flutes
                                                                                                                • S (Short)
                                                                                                                • TS
                                                                                                                • General Steel
                                                                                                                • 2 Flutes
                                                                                                                • R (Regular)
                                                                                                                • TS
                                                                                                                • General Steel
                                                                                                                • 2 Flutes
                                                                                                                • S (Short)
                                                                                                                • TS
                                                                                                                • General Steel
                                                                                                                • 2 Flutes
                                                                                                                • B (Stub)
                                                                                                                • TS
                                                                                                                • General Steel
                                                                                                                • 3 Flutes
                                                                                                                • S (Short)
                                                                                                                • TS
                                                                                                                • General Steel
                                                                                                                • 3 Flutes
                                                                                                                • R (Regular)
                                                                                                                • TS
                                                                                                                • General Steel
                                                                                                                • 4 Flutes
                                                                                                                • S (Short)
                                                                                                                • TS
                                                                                                                • General Steel
                                                                                                                • 4 Flutes
                                                                                                                • R (Regular)
                                                                                                                • Non-Coated
                                                                                                                • General Steel
                                                                                                                • 2 Flutes
                                                                                                                • S (Short)
                                                                                                                • TS
                                                                                                                • General Steel
                                                                                                                • 2 Flutes
                                                                                                                • TS
                                                                                                                • General Steel
                                                                                                                • 3 Flutes
                                                                                                                • TS
                                                                                                                • General Steel
                                                                                                                • 2 Flutes
                                                                                                                • TS
                                                                                                                • General Steel
                                                                                                                • 3 Flutes
                                                                                                                • TS
                                                                                                                • General Steel
                                                                                                                • 4 Flutes
                                                                                                                • TS
                                                                                                                • High-Hardness Steel
                                                                                                                • 2 Flutes
                                                                                                                • TS
                                                                                                                • High-Hardness Steel
                                                                                                                • 2 Flutes
                                                                                                                • B (Stub)
                                                                                                                • TS
                                                                                                                • High-Hardness Steel
                                                                                                                • 2 Flutes
                                                                                                                • S (Short)
                                                                                                                • TS
                                                                                                                • High-Hardness Steel
                                                                                                                • 2 Flutes
                                                                                                                • B (Stub)
                                                                                                                • TS
                                                                                                                • High-Hardness Steel
                                                                                                                • 2 Flutes
                                                                                                                • S (Short)
                                                                                                                • TS
                                                                                                                • High-Hardness Steel
                                                                                                                • 3 Flutes
                                                                                                                • S (Short)
                                                                                                                • TS
                                                                                                                • High-Hardness Steel
                                                                                                                • 3 Flutes
                                                                                                                • R (Regular)
                                                                                                                • TS
                                                                                                                • High-Hardness Steel
                                                                                                                • 4 Flutes
                                                                                                                • S (Short)
                                                                                                                • TS
                                                                                                                • High-Hardness Steel
                                                                                                                • 4 Flutes
                                                                                                                • R (Regular)
                                                                                                                • TS
                                                                                                                • High-Hardness Steel
                                                                                                                • 2 Flutes
                                                                                                                • TS
                                                                                                                • High-Hardness Steel
                                                                                                                • 3 Flutes
                                                                                                                • TS
                                                                                                                • SUS
                                                                                                                • 2 Flutes
                                                                                                                • S (Short)
                                                                                                                • DLC
                                                                                                                • Aluminum
                                                                                                                • 2 Flutes
                                                                                                                • S (Short)
                                                                                                                R Size(mm)0.05 ~ 30.05 ~ 100.05 ~ 100.05 ~ 30.3 ~ 10.03 ~ 60.05 ~ 60.1 ~ 30.5 ~ 2.51 ~ 151 ~ 12.5-1 ~ 100.2 ~ 30.3 ~ 20.2 ~ 60.2 ~ 12.52 ~ 80.05 ~ 100.2 ~ 80.5 ~ 12.50.5 ~ 50.5 ~ 101 ~ 61 ~ 101.5 ~ 60.2 ~ 100.1 ~ 50.5 ~ 30.05 ~ 30.5 ~ 31 ~ 31 ~ 50.3 ~ 30.2 ~ 2.50.2 ~ 62 ~ 80.5 ~ 60.5 ~ 50.5 ~ 51.5 ~ 50.1 ~ 50.5 ~ 31 ~ 50.5 ~ 6
                                                                                                                TypeLong-Neck BallBallBallLong-Neck BallBallBallBallLong-Neck BallLong-Neck BallBallBallLong-Neck BallBallBallBallBallBallBallBallBallBallLong-Neck Ball / Spherical BallBallBallBallBallBallTapered neck ballTapered neck ballLong-Neck BallLong-Neck BallLong-Neck BallBallBallBallBallBallBallBallBallBallTapered neck ballTapered neck ballBallBall
                                                                                                                work materialgeneral steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○/◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Aluminum[○] / Titanium[◎] / Copper[○] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[◎]Aluminum[◎] / Copper[◎] / Graphite[◎]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○]-High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]general steel[○] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Cast Iron[○]Aluminum[◎] / Copper[○] / Resin[○]
                                                                                                                Blade length (ℓ)(mm)0.07 ~ 60.2 ~ 380.1 ~ 300.07 ~ 60.5 ~ 1.20.06 ~ 220.1 ~ 200.16 ~ 4.81.5 ~ 7.520 ~ 802 ~ 60-2 ~ 300.6 ~ 90.6 ~ 40.4 ~ 120.8 ~ 508 ~ 300.2 ~ 251.5 ~ 302 ~ 30-2 ~ 255 ~ 223 ~ 255 ~ 220.8 ~ 250.2 ~ 80.8 ~ 60.07 ~ 80.8 ~ 4.81.6 ~ 61 ~ 50.6 ~ 60.6 ~ 7.50.4 ~ 126 ~ 201.5 ~ 183 ~ 181.5 ~ 155 ~ 180.15 ~ 80.8 ~ 63 ~ 151.5 ~ 18
                                                                                                                Number of flutes(sheet)222222222222222222222233442232342222233442322
                                                                                                                CoatingFor High Hardness (Silicon Group)For General Steels (AlCrN, etc.)TiAlNFor High Hardness (Silicon Group)Non-CoatedFor High Hardness (Silicon Group)For High Hardness (Silicon Group)TiAlNDia Coat-TiAlNOtherFor High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)TiAlNTiAlNFor High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)Non-CoatedFor High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)For High Hardness (Silicon Group)DLC
                                                                                                                Overall Length (L)(mm)50 ~ 11040 ~ 16050 ~ 17045 ~ 12052 ~ 5350 ~ 11050 ~ 10045 ~ 12060 ~ 100120 ~ 25080 ~ 23080 ~ 15060 ~ 16050 ~ 904040 ~ 6540 ~ 180100 ~ 25040 ~ 15050 ~ 14070 ~ 28070 ~ 9050 ~ 15050 ~ 11050 ~ 15060 ~ 11040 ~ 15050 ~ 11050 ~ 11040 ~ 11050 ~ 11050 ~ 7050 ~ 904050 ~ 8040 ~ 65100 ~ 22050 ~ 11050 ~ 10050 ~ 10060 ~ 10050 ~ 11050 ~ 11050 ~ 10050 ~ 110
                                                                                                                Underneck length (ℓ1)(mm)0.3 ~ 50--0.2 ~ 501.5 ~ 5--0.5 ~ 505 ~ 50-14 ~ 2140 ~ 105------15 ~ 7517 ~ 8015 ~ 804 ~ 5515 ~ 7517 ~ 7215 ~ 7517 ~ 72-1.5 ~ 607 ~ 600.2 ~ 603 ~ 504 ~ 305 ~ 10----14 ~ 6817 ~ 6814 ~ 6517 ~ 682 ~ 503 ~ 50-14 ~ 68
                                                                                                                Shank diameter (d)(mm)4 ~ 63 ~ 204 ~ 204 ~ 644 ~ 124 ~ 124 ~ 664 ~ 256 ~ 256 ~ 106 ~ 20664 ~ 123 ~ 254 ~ 163 ~ 204 ~ 163 ~ 256 ~ 106 ~ 206 ~ 126 ~ 206 ~ 123 ~ 204 ~ 124 ~ 83 ~ 84 ~ 64 ~ 66 ~ 10664 ~ 124 ~ 164 ~ 124 ~ 104 ~ 106 ~ 104 ~ 124 ~ 86 ~ 104 ~ 12
                                                                                                                R Precision(μm)±0.005-0.007 ~ +0.003 ~ ±0.010.005~-0.005 ~ 0.02~-0.020.005~-0.0050.005~-0.005-0.007~0.007 ~ -0.002~0.0020.005~-0.005 ~ 0.01~-0.01-0.01~+0.01-±0.02----0.005 ~ +0.001 ~ ±0.003±0.003-0.007 ~ +0.003 ~ ±0.005±0.01±0.01-0.007 ~ +0.003 ~ ±0.01-0.007 ~ +0.003 ~ ±0.01-0.007 ~ +0.003 ~ ±0.01±0.01±0.01±0.01±0.01±0.01±0.01-0.007 ~ +0.003 ~ ±0.005-0.007 ~ +0.003 ~ ±0.005-0.007 ~ +0.003 ~ ±0.005-0.007 ~ +0.003 ~ ±0.005-0.007 ~ +0.003 ~ ±0.005±0.01-0.005 ~ +0.001 ~ ±0.003±0.003-0.007 ~ +0.003 ~ ±0.005-0.007 ~ +0.003 ~ ±0.01±0.01±0.01±0.01±0.01-0.007 ~ +0.003 ~ ±0.005-0.007 ~ +0.003 ~ ±0.005±0.01±0.01
                                                                                                                Machining ApplicationCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Engraving / R Groove-Curved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R GrooveCurved surface / Side / Engraving / R Groove

                                                                                                                Loading...

                                                                                                                Kategorien beziehen sich auf Hartmetall-Kugelschaftfräser