Radiusfräser (Hartmetall)(Seite 2)

Daten, die angezeigt werden sollen
30
45
60
Sortierung
Lieferzeit
  • Alle Produkte
  • 3 Tag oder weniger
  • 4 Tag oder weniger
  • 5 Tag oder weniger
  • 6 Tag oder weniger
  • 12 Tag oder weniger
  • 13 Tag oder weniger
Warenzeichen
Artikelserie
ab
Minimum Lieferzeit
Spezifikationen
Blade diameter (D)(φ)
R Size(mm)
work material
Blade length (ℓ)(mm)
Number of flutes(sheet)
Type
Overall Length (L)(mm)
Shank diameter (d)(mm)
Underneck length (ℓ1)(mm)
Machining Application
Coating
Torsion Angle (θ)
R Precision(μm)

    TSC series carbide radius end mill, 3-flute, 45° spiral / short model

      DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model

        Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model

          Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model

            Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

              Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model

                Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model

                  TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model

                    Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

                      TSC Series Carbide Uneven Lead 4-Flute Radius End Mill

                        VAC Series Carbide 2-Flute Radius End Mill

                          VAC Series Carbide 4-Flute Uneven Lead Radius End Mill

                            DLC Mill Radius 2DLCM-R

                              GS MILL Hard Radius GSH-R

                                GSX MILL VL, TI / SUS Radius 2.5D GSXVL4T-R-2.5D

                                  GS MILL Radius GS4-R

                                    X's Mill, Geo Radius, 4XSGEO-R

                                      2-Flute Corner R Short GX-CR-EDS-SF

                                        2-Flute Corner R Short FX-CR-EDS-6

                                          2-Flute Corner R Short FX-CR-MG-EDS

                                            2-Flute, Corner R Long, FX-CR-MG-EDL

                                              2-Flute, Die Plunging Process, GX-PDS-SF

                                                New DLC Coated Carbide End Mill 2 Flute Aluminum Alloy Short Type DLC-AIR-EDS

                                                  3-Flute, for Aluminum Alloy, CA-MFE-SF

                                                    3-Flute, Corner R Short for Steel / Aluminum Alloy CA-CR-ETS

                                                      Carbide End Mill Phoenix (High Feeder Bull Nose) PHX-CRT

                                                        Carbide End Mill Phoenix (Deep Feeder Radius) PHX-DFR

                                                          Heavy-Duty, Multifunction for 3-Flute Steel / Aluminum Alloy CA-PKE

                                                            Carbide Ultra FX End Mill (Positive Corner R Type Multi-Function) FX-CR-MG-EHS

                                                              4-Flute Corner R, Long, FX-CR-MG-EML

                                                                4-Blade Unequal Reed Corner R Short, Heavy-Duty Cutting Type NEO-CR-PHS

                                                                  Corner Long Shank for 2-Flute Graphite DIA-LS-CRED

                                                                    WX21 Carbide End Mill (Super Radius), WX-CRE

                                                                      Cermet End Mill (for Bottom Surface Finishing), FX-MCF

                                                                        Powerful Type Multi-Function FXS-PKE

                                                                          Carbide Ultra FX Super End Mill (Powerful Type Multi-Function HS Shank) FXS-HS-PKE

                                                                            WX21 Carbide End Mill, 4-Flute, Short, Corner Radius, Strong, Heavy-Duty Model, WX-CR-PHS

                                                                              Carbide Ultra FX Super End Mill (Corner R Short) FXS-CR-EMS

                                                                                Carbide End Mill (Multi-Flute Unequal Lead Corner R Short) NEO-CR-EMS

                                                                                  Multi-Function Type for Deep Wall Applications FXS-MFE

                                                                                    UT Coat, 2 Flutes, Radius

                                                                                      CBN End MILL (Small-Diameter, 2-Flute, Corner Radius End Mill) CBN-SXR

                                                                                        HG Coated High Helix Carbide Radius

                                                                                          SA Coated Carbide Radius 2-Flute

                                                                                            SA Coated Carbide Radius 4-Flute Long Shank

                                                                                            Warenzeichen

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            MISUMI

                                                                                            NACHI(FUJIKOSHI)

                                                                                            NACHI(FUJIKOSHI)

                                                                                            NACHI(FUJIKOSHI)

                                                                                            NACHI(FUJIKOSHI)

                                                                                            NACHI(FUJIKOSHI)

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            UNION TOOL

                                                                                            OSG

                                                                                            SANKO MFG

                                                                                            SANKO MFG

                                                                                            SANKO MFG

                                                                                            Artikelserie

                                                                                            TSC series carbide radius end mill, 3-flute, 45° spiral / short model

                                                                                            DLC Coated Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model

                                                                                            Carbide Radius End Mill for Aluminum Machining, 2-Flute / Regular Model

                                                                                            Carbide Radius End Mill for Aluminum Machining, 3-Flute / Regular Flute Length Model

                                                                                            Carbide Radius End Mill for Aluminum Machining, 3-Flute / Stub, Long Shank Model

                                                                                            Diamond Coated Carbide Radius End Mill for Graphite Machining, 4-Flute / Long Model

                                                                                            Carbide Radius End Mill for Resin Machining, 2-Flute / Regular Model

                                                                                            TSC Series Coated Carbide Radius End Mill, 3-Flute, 45° Spiral / Short, Long Neck Model

                                                                                            Non-Coated TS Coated Carbide 0.1 mm Unit Radius Designated End Mill

                                                                                            TSC Series Carbide Uneven Lead 4-Flute Radius End Mill

                                                                                            VAC Series Carbide 2-Flute Radius End Mill

                                                                                            VAC Series Carbide 4-Flute Uneven Lead Radius End Mill

                                                                                            DLC Mill Radius 2DLCM-R

                                                                                            GS MILL Hard Radius GSH-R

                                                                                            GSX MILL VL, TI / SUS Radius 2.5D GSXVL4T-R-2.5D

                                                                                            GS MILL Radius GS4-R

                                                                                            X's Mill, Geo Radius, 4XSGEO-R

                                                                                            2-Flute Corner R Short GX-CR-EDS-SF

                                                                                            2-Flute Corner R Short FX-CR-EDS-6

                                                                                            2-Flute Corner R Short FX-CR-MG-EDS

                                                                                            2-Flute, Corner R Long, FX-CR-MG-EDL

                                                                                            2-Flute, Die Plunging Process, GX-PDS-SF

                                                                                            New DLC Coated Carbide End Mill 2 Flute Aluminum Alloy Short Type DLC-AIR-EDS

                                                                                            3-Flute, for Aluminum Alloy, CA-MFE-SF

                                                                                            3-Flute, Corner R Short for Steel / Aluminum Alloy CA-CR-ETS

                                                                                            Carbide End Mill Phoenix (High Feeder Bull Nose) PHX-CRT

                                                                                            Carbide End Mill Phoenix (Deep Feeder Radius) PHX-DFR

                                                                                            Heavy-Duty, Multifunction for 3-Flute Steel / Aluminum Alloy CA-PKE

                                                                                            Carbide Ultra FX End Mill (Positive Corner R Type Multi-Function) FX-CR-MG-EHS

                                                                                            4-Flute Corner R, Long, FX-CR-MG-EML

                                                                                            4-Blade Unequal Reed Corner R Short, Heavy-Duty Cutting Type NEO-CR-PHS

                                                                                            Corner Long Shank for 2-Flute Graphite DIA-LS-CRED

                                                                                            WX21 Carbide End Mill (Super Radius), WX-CRE

                                                                                            Cermet End Mill (for Bottom Surface Finishing), FX-MCF

                                                                                            Powerful Type Multi-Function FXS-PKE

                                                                                            Carbide Ultra FX Super End Mill (Powerful Type Multi-Function HS Shank) FXS-HS-PKE

                                                                                            WX21 Carbide End Mill, 4-Flute, Short, Corner Radius, Strong, Heavy-Duty Model, WX-CR-PHS

                                                                                            Carbide Ultra FX Super End Mill (Corner R Short) FXS-CR-EMS

                                                                                            Carbide End Mill (Multi-Flute Unequal Lead Corner R Short) NEO-CR-EMS

                                                                                            Multi-Function Type for Deep Wall Applications FXS-MFE

                                                                                            UT Coat, 2 Flutes, Radius

                                                                                            CBN End MILL (Small-Diameter, 2-Flute, Corner Radius End Mill) CBN-SXR

                                                                                            HG Coated High Helix Carbide Radius

                                                                                            SA Coated Carbide Radius 2-Flute

                                                                                            SA Coated Carbide Radius 4-Flute Long Shank

                                                                                            ab

                                                                                            58.23 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            -

                                                                                            Mengenrabatt

                                                                                            -

                                                                                            Mengenrabatt

                                                                                            -

                                                                                            Mengenrabatt

                                                                                            62.56 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            159.17 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            24.89 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            49.43 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            -

                                                                                            27.00 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            29.24 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            29.24 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            50.68 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            86.32 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            82.11 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            52.42 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            71.56 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            56.95 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            65.64 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            59.59 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            92.98 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            119.18 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            116.32 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            126.30 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            58.02 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            98.62 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            88.35 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            60.95 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            95.10 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            107.28 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            83.05 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            160.05 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            55.43 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            94.84 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            74.54 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            86.13 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            74.31 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            108.19 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            94.81 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            133.79 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            40.85 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            100.88 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            51.07 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            59.99 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Mengenrabatt

                                                                                            95.14 €

                                                                                            *Stückpreis Standardkonfiguration

                                                                                            Minimum Lieferzeit 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 5 Arbeitstage 3 Arbeitstage 3 Arbeitstage 3 Arbeitstage 4 Arbeitstage 6 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 5 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 5 Arbeitstage 5 Arbeitstage 5 Arbeitstage 5 Arbeitstage 5 Arbeitstage 5 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 3 Arbeitstage 5 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 4 Arbeitstage 3 Arbeitstage 4 Arbeitstage 4 Arbeitstage 5 Arbeitstage 4 Arbeitstage 6 Arbeitstage 6 Arbeitstage
                                                                                            Spezifikationen
                                                                                            • TS
                                                                                            • SUS
                                                                                            • 3 Flutes
                                                                                            • S (Short)
                                                                                            • DLC
                                                                                            • Aluminum
                                                                                            • 3 Flutes
                                                                                            • R (Regular)
                                                                                            • Non-Coated
                                                                                            • Aluminum
                                                                                            • 2 Flutes
                                                                                            • R (Regular)
                                                                                            • Non-Coated
                                                                                            • Aluminum
                                                                                            • 3 Flutes
                                                                                            • R (Regular)
                                                                                            • Non-Coated
                                                                                            • Aluminum
                                                                                            • 3 Flutes
                                                                                            • DIA
                                                                                            • Graphite
                                                                                            • 4 Flutes
                                                                                            • Long
                                                                                            • Non-Coated
                                                                                            • Resin
                                                                                            • 2 Flutes
                                                                                            • R (Regular)
                                                                                            • TS
                                                                                            • High-Hardness Steel
                                                                                            • 3 Flutes
                                                                                            • Non-Coated
                                                                                            • General Steel
                                                                                                                                                                    Blade diameter (D)(φ)3 ~ 122 ~ 122 ~ 122 ~ 125 ~ 226 ~ 121 ~ 104 ~ 121 ~ 202 ~ 251 ~ 121.5 ~ 122 ~ 206 ~ 206 ~ 203 ~ 123 ~ 2010 ~ 200.5 ~ 2.51 ~ 202 ~ 2518 ~ 2212 ~ 2518 ~ 223 ~ 201 ~ 206 ~ 203 ~ 206 ~ 256 ~ 203 ~ 255 ~ 112 ~ 136 ~ 203 ~ 206 ~ 203 ~ 206 ~ 256 ~ 2510 ~ 221 ~ 120.5 ~ 34 ~ 253 ~ 206 ~ 25
                                                                                                                                                                    R Size(mm)0.5 ~ 20.2 ~ 10.2 ~ 10.2 ~ 10.5 ~ 20.5 ~ 30.21 ~ 20.1 ~ 30.2 ~ 6.50.1 ~ 30.2 ~ 30.2 ~ 30.2 ~ 20.3 ~ 30.2 ~ 20.2 ~ 30.5 ~ 10.1 ~ 0.20.1 ~ 40.2 ~ 80.21 ~ 310.2 ~ 30.3 ~ 31.5 ~ 30.5 ~ 30.2 ~ 30.5 ~ 30.2 ~ 50.3 ~ 10.5 ~ 30.1 ~ 0.40.2 ~ 30.5 ~ 30.2 ~ 30.2 ~ 30.3 ~ 50.5 ~ 10.2 ~ 30.05 ~ 0.50.5 ~ 30.5 ~ 50.3 ~ 8
                                                                                                                                                                    work materialgeneral steel[◎] / Quenched and tempered steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○]Aluminum[◎] / Copper[○] / Resin[○]Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○]Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○]Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[○] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○]Aluminum[◎] / Copper[○]Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]Stainless Steel[◎] / Titanium[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○]general steel[◎] / Quenched and tempered steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]general steel[◎] / Quenched and tempered steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Graphite[○]Aluminum[◎]Aluminum[◎] / Copper[◎]Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[○]Aluminum[◎] / Copper[◎] / Resin[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]Graphite[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Cast Iron[◎]general steel[◎] / Quenched and tempered steel[○] / Stainless Steel[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎]general steel[○] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[◎] / High Hardness Steel-HRC60[◎] / High Hardness Steel-HRC65[◎]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]general steel[◎] / Quenched and tempered steel[◎] / High Hardness Steel-HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○]
                                                                                                                                                                    Blade length (ℓ)(mm)7 ~ 185 ~ 365 ~ 365 ~ 369 ~ 3330 ~ 603 ~ 308 ~ 244 ~ 604 ~ 502.5 ~ 304 ~ 306 ~ 3813 ~ 3815 ~ 507.5 ~ 268 ~ 3810 ~ 200.7 ~ 3.72.5 ~ 3810 ~ 677 ~ 914 ~ 2718 ~ 228 ~ 382 ~ 4012 ~ 404.5 ~ 3013 ~ 4520 ~ 566 ~ 5010 ~ 220.8 ~ 5.50.9 ~ 3.25 ~ 309 ~ 308 ~ 3815 ~ 5012 ~ 5015 ~ 332 ~ 250.3 ~ 1.89 ~ 5610 ~ 4520 ~ 75
                                                                                                                                                                    Number of flutes(sheet)332334232 ~ 442426 ~ 84442222223333344423 ~ 444446 ~ 86422424
                                                                                                                                                                    TyperadiusradiusradiusradiusradiusradiusradiusLong-Neck Radiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradiusradius
                                                                                                                                                                    Overall Length (L)(mm)60 ~ 10040 ~ 8040 ~ 8040 ~ 8080 ~ 200150 ~ 20050 ~ 8070 ~ 14040 ~ 12550 ~ 12050 ~ 13050 ~ 15040 ~ 10050 ~ 10050 ~ 10045 ~ 7550 ~ 12532 ~ 585040 ~ 11050 ~ 18046 ~ 5490 ~ 11051 ~ 6050 ~ 10560 ~ 15080 ~ 15050 ~ 12590 ~ 18090 ~ 16050 ~ 120100 ~ 18060 ~ 11090 ~ 16060 ~ 16050 ~ 11060 ~ 12590 ~ 18050 ~ 120130 ~ 20045 ~ 7545 ~ 5050 ~ 14050 ~ 115120 ~ 230
                                                                                                                                                                    Shank diameter (d)(mm)6 ~ 124 ~ 124 ~ 124 ~ 124 ~ 206 ~ 123 ~ 104 ~ 124 ~ 206 ~ 256 ~ 126 ~ 124 ~ 206 ~ 206 ~ 206 ~ 126 ~ 206 ~ 1264 ~ 204 ~ 2510 ~ 1212 ~ 2510 ~ 126 ~ 206 ~ 206 ~ 206 ~ 206 ~ 256 ~ 206 ~ 254 ~ 106 ~ 126 ~ 206 ~ 206 ~ 206 ~ 206 ~ 256 ~ 258 ~ 204 ~ 124 ~ 64 ~ 256 ~ 206 ~ 25
                                                                                                                                                                    Underneck length (ℓ1)(mm)-23 ~ 5023 ~ 5023 ~ 50-60 ~ 85------------1.5 ~ 5---40 ~ 56--4 ~ 15------5 ~ 249 ~ 309 ~ 60------1.5 ~ 6---
                                                                                                                                                                    Machining ApplicationPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / GroovePlane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Curved surface / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Curved surfacePlane / Side / Curved surfacePlane / Side / Curved surfacePlane / Side / Curved surfacePlane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surfacePlane / Side / Curved surfacePlane / Side / Curved surfacePlane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Curved surfacePlane / Side / Curved surfacePlane / Side / Curved surfacePlane / Side / Curved surfacePlane / Side / Curved surfacePlane / Side / Curved surfacePlane / Side / Curved surfacePlane / Side / Curved surface / Groove / Plunging (Z feed)Plane / Side / Groove / Plunging (Z feed) / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined CutsPlane / Side / Curved surface / Groove / Inclined Cuts
                                                                                                                                                                    CoatingFor High Hardness (Silicon Group)DLCNon-CoatedNon-CoatedNon-CoatedDia CoatNon-CoatedFor High Hardness (Silicon Group)For High Hardness (Silicon Group) / Non-CoatedFor High Hardness (Silicon Group)--DLCTiAlNFor General Steels (AlCrN, etc.)TiAlNTiAlNFor General Steels (AlCrN, etc.)TiAlNTiAlNTiAlNFor General Steels (AlCrN, etc.)DLCNon-CoatedNon-CoatedTiAlNFor High Hardness (Silicon Group)Non-CoatedTiAlNTiAlNTiAlNDia CoatTiAlNTiAlNTiAlNTiAlNTiAlNTiAlNTiAlNTiAlNTiCN-For General Steels (AlCrN, etc.)TiAlNTiAlN
                                                                                                                                                                    Torsion Angle (θ)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Other--Standard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)No torsionStandard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)No torsionWeak torsion (15 to 25˚)No torsionStandard torsion (30-40°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)Standard torsion (30-40°)No torsionNo torsionPowerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Powerful Torsion (45°-60°)Standard torsion (30-40°)Powerful Torsion (45°-60°)--Powerful Torsion (45°-60°)Standard torsion (30-40°)Standard torsion (30-40°)
                                                                                                                                                                    R Precision(μm)±0.02±0.02±0.01 ~ ±0.02±0.01 ~ ±0.02±0.02±0.02±0.02±0.015±0.02±0.02---0.032~-0.059 ~ -0.014~-0.028-0~-0.0300~-0.030 ~ 0~-0.015-0.032~-0.059 ~ -0.014~-0.028-------------------------0~+0.040~+0.040~+0.04

                                                                                                                                                                    Loading...

                                                                                                                                                                    Kategorien beziehen sich auf Radiusfräser (Hartmetall)