Betonbohrer

?* Informationen zur Lieferzeit

• 

  Sechskantwellen-Einsatz HEX-Typ

  UNIKA

  [Features]
  · Hammer drill dedicated bit that efficiently transmits striking torque without loss.
  · The integral design from the chuck part to the cutting edge makes it effective in through hole and deep hole machining.
  · Bits for drilling pilot holes for anchors or bits for stone (for slope construction) are also available.
  · Supports a wide range of work requirements. * Use the dedicated stone material type for drilling stone.
  · Applicable Motor: Hammer Drill

  • Mengenrabatt

  ab∗ ：	24.32 €
  Minimum Lieferzeit ：	3 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Betonbohrer, Gerader Schaft CD-S

  SKC

  ab∗ ：	9.60 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Alle Bohrer® SDMLL Kegelwelle

  SANKO TECHNO

  [Features]
  · All sizes can be exchanged with a single taper shaft adapter.
  · Since it is easy to remove the drill with a cotter, it is economical as well as effective in various types of drilling in the field.
  · By using the long adapter, it is possible to safely and smoothly drill holes in the ceiling.
  · It is designed as a cutting edge suitable for stone drilling.
  [Applications]
  · For Stone

  ab∗ ：	27.13 €
  Minimum Lieferzeit ：	11 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Betonbohrer, konisch, CD-L

  SKC

  ab∗ ：	24.93 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Bohrer für Porzellan, Fliesen, TR-Typ

  UNIKA

  • Mengenrabatt

  ab∗ ：	8.92 €
  Minimum Lieferzeit ：	3 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Wiederaufladbarer Bohrer für Porzellan, Fliesen TJ Typ

  UNIKA

  ab∗ ：	9.10 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Sechskantwelle für Stein (für die Neigungskonstruktion)

  UNIKA

  [Features]
  · Carbide tip which is optimal for stone is used.
  · Hammer drill dedicated bit that efficiently transmits striking torque without loss.

  • Mengenrabatt

  ab∗ ：	28.61 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Betonbohrer (sowohl für Drehung als auch Vibration)

  HOUSE BM

  [Features]
  · Rotation mode: For drilling mortar, ALC, Japanese style walls, ceramic siding, pottery tile, etc.
  · Impact mode: For drilling holes in concrete, blocks, brick, mortar, etc.

  • Mengenrabatt

  ab∗ ：	7.59 €
  Minimum Lieferzeit ：	3 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kegelbohrer (für Bohrhammer)

  HOUSE BM

  [Features]
  · For drilling holes in concrete, stone materials etc.

  • Mengenrabatt

  ab∗ ：	13.28 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Alle Bohrer® HEX Sechskantwelle/Standard-Typ

  SANKO TECHNO

  [Features]
  · Shank is a hex shaft type dedicated for hammer drills.
  · Efficient transmission of striking and rotation force to the cutting edge for speedy drilling.
  · With ideal spirals, it discharges cutting powder smoothly and increases drilling capacity.
  · Special carbide alloy blade tip, strictly selected steel material, and uniquely heat treated shank provide excellent wear resistance.
  · Hexagonal shaft drill with excellent durability and sharpness.
  [Applications]
  · For drilling holes in concrete, blocks, mortar, etc. (Use the dedicated stone material type for drilling stone).
  [Specifications]
  · Shank Diameter (mm): 13

  ab∗ ：	44.95 €
  Minimum Lieferzeit ：	11 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Alle Bohrer® MT Kegelwelle/Standard Typ mit Blister-Pack

  SANKO TECHNO

  [Features]
  · All sizes can be exchanged with a single taper shaft adapter.
  · Since it is easy to remove the drill with a cotter, it is economical as well as effective in various types of drilling in the field.
  · By using the long adapter, it is possible to safely and smoothly drill holes in the ceiling.
  [Applications]
  · For drilling holes in concrete, blocks, mortar, etc.

  ab∗ ：	12.03 €
  Minimum Lieferzeit ：	11 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Alle Bohrer®-Adapter/Sicherungsstift für MT-Typ MT-1/SDS-MT-1 (Sechskantwelle/SDS-Plus-Schaft)

  SANKO TECHNO

  [Features]
  · A single adapter supports all sizes of the all drill/MT type.
  · 2 types available, for hexagonal shaft shanks and SDS-plus shaft shanks.
  · A wide selection of long types is also available, making it convenient for drilling holes in the ceiling.

  ab∗ ：	5.00 €
  Minimum Lieferzeit ：	11 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Betonbohrer für Schwingungsbohrer (gerader Schaft)【1-5 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · Achieves fantastic cutting quality by using an ultra-hard tip with excellent durability, and employing a specially designed blade tip shape and angle.

  • Mengenrabatt

  ab∗ ：	6.35 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Betonbohrer (SDSplus-Schaft) für Bohrhammer mit geringer Kapazität【1-3 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · The carbide tip and cutting edge of the candle type have been made thin, allowing it to drill workpieces sharply and improving the drilling speed.
  · The center point at the end of the carbide tip exhibits excellent positioning performance to facilitate drilling that is close to a perfect circle.
  · Center point suppress core vibration during drilling to reduce vibration load during operation.
  [Applications]
  · Work materials: Concrete, blocks, mortar, Japanese walls.

  • Mengenrabatt

  ab∗ ：	8.85 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Aufladbarer Sechskant-Schraubendrehereinsatz (6,35 mm Sechskantwelle)【1-3 Stk. pro Packung】

  TRUSCO NAKAYAMA

  [Features]
  · Use of 6.35 mm hexagonal shank improves torque transmission efficiency.
  · An integrated shape from the shank to blade tip for safety.
  [Applications]
  · Work materials: Block, mortar, brick, plasterboard, etc.

  • Mengenrabatt

  ab∗ ：	8.03 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Betonbohrer „SDS-Plus-UX“ (SDSplus-Schaft) für Bohrhammer mit geringer Kapazität

  TRUSCO NAKAYAMA

  [Features]
  · It can make a hole close to a perfect circle and makes inserting an anchor smooth.
  · The blade tip is a cross blade which can penetrate a deck plate.
  · The low-wear blade tips and outer diameter cross blades maintain stable hole boring and minimize pinching even when reinforced steel bar is struck.
  [Applications]
  · Work material: Deck plate + Concrete, Block, Brick, Mortar, Gypsum board, Marble.

  • Mengenrabatt

  ab∗ ：	10.81 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Wiederaufladbarer Bohreinsatz für Fliesen aus Porzellan (6,35 Sechskant-Set)

  TRUSCO NAKAYAMA

  [Features]
  · Because a special carbide tip that maintains boring force is adopted, hard-to-cut materials can be bored steadily with sharp cutting quality.
  · When the cutting edge is cooled with water before boring, the edge has more cutting ability and durability.
  · An integrated shape from the shank to enable proper perforation without blade tip chattering.
  [Applications]
  · Work materials: Porcelain tiles, ceramic tiles, roof tiles, etc.

  ab∗ ：	8.51 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  „Glas“ (gerader Schaft)

  TRUSCO NAKAYAMA

  [Features]
  · Ideal for delicate drilling of difficult-to-cut materials such as glass and marble.
  [Applications]
  · Work materials: Glass, tile, marble, concrete, etc.

  ab∗ ：	9.75 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Betonbohrer, lang, gerader Schaft CD-L

  SKC

  ab∗ ：	27.31 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Betonbohrer, für Hilti SDS

  SKC

  ab∗ ：	27.31 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Betonbohrer, für Sechskantwelle-Hämmer CD-H

  SKC

  ab∗ ：	56.27 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  SDS-Bit Max SDSMAX Typ

  UNIKA

  [Features]
  · SDS-max shank hammer drill dedicated bit that efficiently transmits high striking torque to the cutting edge without loss.
  · The integral design from the chuck part to the cutting edge makes it effective in through hole and deep hole machining.
  · Cold chisels and bull points for chipping hammer are also available.

  • Mengenrabatt

  ab∗ ：	28.23 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  SDS-Plus-UX

  UNIKA

  [Features]
  · The blade tip is a cross blade which can penetrate a deck plate.
  · Can make a hole close to a perfect circle, allowing anchors to be inserted smoothly.
  · The low-wear blade tips and outer diameter cross blades maintain stable hole boring and minimize biting even when reinforced steel bar is struck.

  • Mengenrabatt

  ab∗ ：	12.25 €
  Minimum Lieferzeit ：	3 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  SDS-Plus-Einsätze SDS-Typ

  UNIKA

  [Features]
  · Can be attached and detached to/from a lightweight hammer drill in a single action.
  · With U-shaped grooves, drive contact area (60 mm2) is enlarged and impact rotation force is efficiently delivered to the blade edge.
  · In this abundant lineup, the cutting edge diameters range from 3.2 mm to 26.0 mm, and the total lengths from 110 mm to 1,000 mm.

  • Mengenrabatt

  ab∗ ：	9.77 €
  Minimum Lieferzeit ：	3 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Betonbohrer Typ B【1-10 Stk. pro Packung】

  UNIKA

  [Features]
  · Abundant sizes support a wide range of work environment needs.
  · Achieves fantastic cutting quality by using a carbide tip with excellent durability, and employing a specially designed blade tip shape and angle.
  · SKS material (alloy tool steel) with excellent rigidity and impact resistance is selected for cutting edges with diameters: 5.0 mm or less. Suppresses breaking and bending of the drill to the minimum.

  • Mengenrabatt

  ab∗ ：	7.38 €
  Minimum Lieferzeit ：	3 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Span-Obereinsatz (SDS-Plus) TT-Typ【1-5 Stk. pro Packung】

  UNIKA

  • Mengenrabatt

  ab∗ ：	10.00 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Bull Point/Flachmeißel

  UNIKA

  [Features]
  · Less wear, easily handling long periods of use.
  · The durable drill tip ensures constant powerful crushing power.

  • Mengenrabatt

  ab∗ ：	12.33 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Bull Point/Flachmeißel (SDS-Max.)

  UNIKA

  [Features]
  · Less wear, easily handling long periods of use.
  · The durable drill tip ensures constant powerful crushing power.

  ab∗ ：	17.78 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Bull Point/Flachmeißel (SDS-Plus)

  UNIKA

  [Features]
  · Less wear, easily handling long periods of use.
  · The durable drill tip ensures constant powerful crushing power.

  • Mengenrabatt

  ab∗ ：	22.55 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Wiederaufladbare Schlagbohrer-Schraubendrehereinsatz【1-5 Stk. pro Packung】

  UNIKA

  • Mengenrabatt

  ab∗ ：	9.10 €
  Minimum Lieferzeit ：	3 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Wiederaufladbar Diamantkern-Einsatz DJ-Typ

  UNIKA

  [Features]
  · Special brazed diamond blade tip enables hole drilling of porcelain tile with impact drivers. Achieves durability not possible with carbide drills.
  · Fully integrated from the shank to the cutting edge. No blade tip vibration or chatter for accurate hole drilling.
  · Use of 6.35 mm hexagonal shank improves torque transmission efficiency.

  • Mengenrabatt

  ab∗ ：	56.95 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Wiederaufladbare Gleitschleifanlage Bohrer BJ-Typ

  UNIKA

  ab∗ ：	9.10 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Bohrer für Stone SB-Typ

  UNIKA

  [Features]
  · Outstanding sharpness and durability support materials from general stone to difficult-to-cut granite.
  · Provides effective power transmission due to the "slip-proof" engraving on the shank.
  · Because the cutting edge is cooled with water before boring, the edge has more cutting ability and durability.

  • Mengenrabatt

  ab∗ ：	7.61 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Sechskantwelle UX-Einsatz

  UNIKA

  [Features]
  · Hammer drill dedicated bit that efficiently transmits striking torque without loss.
  · Can make a hole close to a perfect circle, allowing anchors to be inserted smoothly.
  · The low-wear blade tips and outer diameter cross blades maintain stable hole boring and minimize biting even when reinforced steel bar is struck. Applicable Motor: Hammer Drill

  • Mengenrabatt

  ab∗ ：	31.67 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Sechskantwelle Betonbohrer

  EARTH MAN

  ab∗ ：	12.26 €
  Minimum Lieferzeit ：	3 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Beton-Diamanteinsatz (Sechskantwelle)

  SANKYO DIAMOND INDUSTRIAL

  • Mengenrabatt

  ab∗ ：	37.46 €
  Minimum Lieferzeit ：	3 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  VB Diamantbohrer Wasser Einspritzventil

  SANKYO DIAMOND INDUSTRIAL

  ab∗ ：	17.34 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  VB Diamantbohrer (Ersatzteilsatz)

  SANKYO DIAMOND INDUSTRIAL

  ab∗ ：	29.23 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Z-Achse Kreuzeinsatz (für leichte Schlagbohrmaschine)

  HOUSE BM

  [Features]
  · With a cross shape (4-flute) blade tip enabling drilling an almost perfect circle, anchor insertion work can be performed smoothly.
  · Enables easy drilling of deck plate + concrete.

  • Mengenrabatt

  ab∗ ：	22.55 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Auswirkungen des Z-Achsen-Einsatzes (SDS) (für leichte Schlagbohrmaschine)【1-30 Stk. pro Packung】

  HOUSE BM

  [Features]
  · Can be attached and detached to/from a lightweight hammer drill in a single action.
  · In this abundant lineup, the cutting edge diameters range from 3.2 mm to 32.0 mm, and the total lengths from 110 mm to 2,000 mm.

  • Mengenrabatt

  ab∗ ：	11.44 €
  Minimum Lieferzeit ：	3 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Betonbohrer mit gezacktem Schaft (Schwingung)

  HOUSE BM

  [Features]
  · The shank has been machined for a serrated shaft finish and to prevent the chuck from slipping.
  · As the drill can be used to its fullest capacity, it provides both sharpness and durability at least 30% higher than conventional products.
  · With a serrated shaft preventing slippage, drilling hard material is now possible.

  • Mengenrabatt

  ab∗ ：	7.75 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kegeladapter (für Bohrhammer)

  HOUSE BM

  [Features]
  · TA type (hexagonal shaft type), ZTA type (SDS type), drill removal cotter.

  • Mengenrabatt

  ab∗ ：	7.15 €
  Minimum Lieferzeit ：	3 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Granitbohrer (für Oszillation)

  HOUSE BM

  [Features]
  · For drilling work on stone, granite, PC boards, etc.

  • Mengenrabatt

  ab∗ ：	7.83 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Einsatz für Zement-Extrusions-geformte Einsätze (für Drehung)

  HOUSE BM

  [Features]
  · For drilling extruded cement boards (ideal for drilling pilot holes for Z-clips).

  • Mengenrabatt

  ab∗ ：	14.37 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Bohrer für Fliesen aus Porzellan/Dachziegel (Drehung)

  HOUSE BM

  [Features]
  · As it can drill by rotation alone, cracking can be prevented.
  · Clean round holes can be drilled.
  · Special polished cutting edge enables direct hole drilling without center marking.
  · If the sharpness deteriorates after drilling tiles and the like, it can also be used for concrete.
  · 3 times higher drilling capacity with porcelain or roof tiles than when drilling with conventional concrete drills.
  · The ideal rpm for the electric drill is 800 to 1,200 per use.
  · Avoid continuous use. (After using 3 to 4 times continuously, stop once and cool using water.)
  · Press the electric drill forcefully when drilling. In addition, use a heavy object.

  • Mengenrabatt

  ab∗ ：	8.87 €
  Minimum Lieferzeit ：	4 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...