Lieferzeit |
|
---|
?* Informationen zur Lieferzeit
Electroplated Diamond Bar, Medium & Precision Finishes【20 Stk. pro Packung】
MISUMI
An affordable 20 piece electroplated diamond bar set. A selection of our popular products.
ab∗ : | 32.63 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Diamant-Schleifstift mit Galvanikbindung (Stahlschaft-Ø3)【1-10 Stk. pro Packung】
HONGIA
ab∗ : | 87.12 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Borazon-Schleifstift für Innenbearbeitung
TRUSCO NAKAYAMA
[Features]
· Shank diameters of 3 mm.
· Knoop hardness is about 4,700 (second hardest material following diamonds) so CBN can be used just as diamond for most workpieces; however, it generates large amounts of heat especially during grinding, so it is best suited for metals containing carbon.
[Applications]
· Applicable workpiece materials: Carbon steel, tool steel alloy, high-speed tool steel, bearing steel, case hardened steel, hardened steel, stainless steel.
ab∗ : | 8.55 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Diamant-Trennscheibe, Metallbindung, alle Schichttypen
MINITOR
[Features]
· A cutting tool capable of speedy and excellent cutting.
· The stainless steel base plate provides safety and stability and there will be no size change due to wear.
[Applications]
· Applicable Materials: Ceramics, Glass, Tool Steel, Alloy Steel, Cemented Carbide, Cermet
ab∗ : | 118.78 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Diamant-Schleifstift galvanisch
YANASE
A wide variety of abrasive grain shapes (diamond and CBN) are available.
[Features]
· A wide variety of abrasive grain shapes (diamond and CBN) are available.
ab∗ : | 6.58 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 17.08 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
MINITOR
[Features]
· Diamond abrasive grains are distributed in all molded layers and provide long service life.
· The moderate elasticity of the resin binding agent provides a uniform finish without deep scratches.
[Applications]
· Applicable Materials: Ceramics, Glass, Tool Steel, Alloy Steel, Cemented Carbide, Cermet
ab∗ : | 27.12 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Diamant-Schleifstift DWP (Kerze) (Galvanikbindung) Standardprodukt
CRYSTON DIAMOND INDUSTRY
ab∗ : | 18.18 € |
---|---|
Minimum Lieferzeit : | 12 Arbeitstage |
*Stückpreis Standardkonfiguration
Internal Grindstone with Shaft
MISUMI
Low chatter ensures high performance on hard materials
ab∗ : | 10.49 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Electroplated Diamond Bar (φ3 Steel Shank)【1-30 Stk. pro Packung】
MISUMI
Introducing the immensely popular electroplated diamond bar set at an affordable price
ab∗ : | 3.64 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Electroplated Diamond Bar (φ3 Stainless Shank)
MISUMI
Special care has been taken in the electroplating process to ensure the quality and grade of the diamond abrasive grain.
As a result, this product is highly durable and achieves a uniform surface finish.
Products with shafts made from S45C tend to vary in shaft diameter due to rust-prevention plating.
The HGDIA shaft is made of superior non-corrosive stainless steel and boasts great durability and precise shaft diameters.
ab∗ : | 13.97 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
Diamond Disk with Specialized Mandrel
MISUMI
The Diamond Series is perfect for grinding and polishing hard-to-process materials
ab∗ : | 10.83 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
Electroplated Diamond Bar (φ6 Steel Shank)【1-10 Stk. pro Packung】
MISUMI
Introducing the extremely popular electroplated diamond bar with a φ6 shank
ab∗ : | 9.24 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Electroplated Diamond Bar with Tapered Tip (Single Item)
MISUMI
Ideal for the removal of hard layers of submarine gates and other long and thin tapered holes following discharge.
ab∗ : | 9.83 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Diamant- und CBN-Schleifstift, Galvanikbindung, für Innenpolieren mit ultrakleinem Durchmesser
NAKANISHI
[Features]
· Ideal for drilling extremely small diameter holes and conducting inner surface grinding and jig grinding.
· The carefully selected abrasive grains are held firmly by the latest electrodeposition technology.
· Uses a high hardness dedicated shaft, with high rigidity that achieves high precision machining.
[Applications]
· Grinding of machine parts, electronic parts, precision parts and molds.
· Suitable for hard and brittle materials (carbide alloy, ceramics, glass, stone, silicon, etc.).
ab∗ : | 13.11 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
„Diamant-Trennscheibe“ (Galvanikbindung)
NAKANISHI
[Features]
· The electrodeposition type has greater protrusion of diamond abrasive grains and features significant concentration to deliver superior grinding force.
[Applications]
· Ideal for groove milling and cutting of substrates, etc., made from hard and brittle materials (carbide alloy, ceramic, stone, glass, and silicon).
ab∗ : | 36.94 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Diamant-Schleifstift für Innenbearbeitung
TRUSCO NAKAYAMA
[Features]
· Shank diameters of 3 mm.
· Knoop hardness is about 7,000 (the hardest material on earth) so it can be used for most workpieces such as metals, marble, glass, etc. Most suited for workpieces with high hardness such as ceramic materials. However, since diamond does not withstand heat, it is not suitable for machining that involves production of large amounts of heat (HSS, etc.).
[Applications]
· Applicable workpiece materials: Carbide alloy, glass, ceramic, rubber, plastic, stone, concrete, ferrite and other nonferrous metals.
ab∗ : | 7.29 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Schleifstifte für Innenbearbeitung, 5-teiliges Set (Borazon)【5 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· Borazon (CBN) is an abrasive grain that has hardness second to diamond. Suitable for iron based materials (stainless steel, SC, SK, SCM, etc.) for which diamond is not suitable.
· Also suitable in cases where sufficient cooling is not possible, as its heat-resistant temperature is higher than that of diamond.
[Applications]
· Applicable workpiece materials: Carbon steel, tool steel alloy, high-speed tool steel, bearing steel, case hardened steel, hardened steel, stainless steel.
ab∗ : | 42.64 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Hoch belastbarer Schleifstift, schwarz, Nr. 325
TRUSCO NAKAYAMA
[Features]
· For finishing, chamfering.
· Special high-hardness stainless steel shank realizes firm operability and suppleness.
· Capable of precision machining thanks to the shank, which bends less.
· Machining time is significantly shortened as work can be done with high loads.
ab∗ : | 15.84 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Hoch belastbarer Schleifstift, schwarz, Nr. 600
TRUSCO NAKAYAMA
[Features]
· For Precision Finishing.
· Special high-hardness stainless steel shank realizes firm operability and suppleness.
· Capable of precision machining thanks to the shank, which bends less.
· Machining time is significantly shortened as work can be done with high loads.
ab∗ : | 16.07 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
TRUSCO NAKAYAMA
[Features]
· Natural diamonds with good shapes are carefully selected and used. Proprietary electrodeposition technology is employed for unfaltering fixture of diamond particles to provide exceptionally long service life.
· Although it can be used dry, grinding fluid can be used to improve accuracy, finish, sharpness and life.
ab∗ : | 7.36 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Diamant-Schleifstift, 8er Set【8 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· For materials that are difficult to grind such as carbide alloys, as well as for non-metals such as glass, ceramics and the like.
· A significant reduction in machining time is achieved.
· Natural diamonds with good shapes are carefully selected and used.
· Proprietary electrodeposition technology is employed for unfaltering fixture of diamond particles to exhibit exceptionally long service life.
[Applications]
· Applicable workpiece materials: Carbide alloy, glass, ceramic, rubber, plastic, stone, concrete, ferrite and other nonferrous metals.
ab∗ : | 82.27 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Diamant-Schleifstift, 5er Set【5 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· For carbide alloys and non-metals such as glass, ceramics and the like.
· A significant reduction in machining time is achieved.
· Natural diamonds with good shapes are carefully selected and used. Proprietary electrodeposition technology is employed for unfaltering fixture of diamond particles to exhibit exceptionally long service life.
[Applications]
· Applicable workpiece materials: Carbide alloy, glass, ceramic, rubber, plastic, stone, concrete, ferrite and other nonferrous metals.
ab∗ : | 97.81 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
TRUSCO NAKAYAMA
[Features]
· Ideal for machining ferrous metals.
· As it has micro crushing power (autogenous action), stable processed surfaces can be produced.
· Heat resistance is better than diamond at about 1,400°C.
ab∗ : | 11.05 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Diamant-Schleifstift, Scheibenform
TRUSCO NAKAYAMA
[Features]
· It is an integrally processed high-precision shank.
· The use of synthetic diamond leads to a much flatter disc.
· Uses rust-resistant stainless steel.
· Higher rigidity compared to a mandrel type.
[Applications]
· Groove filling.
· Cutting.
· Surface processing.
· Chamfering.
· Deburring.
ab∗ : | 25.47 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
CBN-Schleifstift, Scheibenform
TRUSCO NAKAYAMA
[Features]
· It is an integrally processed high-precision shank.
· Uses rust-resistant stainless steel.
· CBN is ideal for processing ferrous metals.
· Higher rigidity compared to a mandrel type.
[Applications]
· Grooving
· Cutting
· Surface Processing
· Chamfering
· Deburring
ab∗ : | 25.47 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 62.17 € |
---|---|
Minimum Lieferzeit : | 10 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 26.84 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 23.48 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 27.32 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 28.21 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 5.93 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 6.62 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 16.01 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 6.37 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 16.01 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 12.33 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 8.75 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Diamant-Schleifstift, Galvanikbindung, Wellendurchmesser 3 mm
MINITOR
[Features]
· Large diamond abrasive grain protrusions for excellent sharpness.
· Ideal for rough grinding when a finish surface roughness is not required.
[Applications]
· Applicable Materials: Ceramics, Glass, Tool Steel, Alloy Steel, Cemented Carbide, Cermet
ab∗ : | 21.19 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
MINITOR
[Features]
· Diamond abrasive grains are distributed in all molded layers and provide long service life.
· Ideal for cutting at will, such as when using a hand grinder.
[Applications]
· Applicable Materials: Ceramics, Glass, Tool Steel, Alloy Steel, Cemented Carbide, Cermet
ab∗ : | 41.98 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Diamant-Schleifstift, Galvanikbindung, Wellendurchmesser 6 mm
MINITOR
[Features]
· Large diamond abrasive grain protrusions for excellent sharpness.
· Ideal for rough grinding when a finish surface roughness is not required.
[Applications]
· Applicable Materials: Ceramics, Glass, Tool Steel, Alloy Steel, Cemented Carbide, Cermet
ab∗ : | 45.86 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
Diamant-Schleifstift, Feinbearbeitung, Galvanikbindung
MINITOR
[Features]
· An electrodeposited diamond bar which has a high-rigidity carbide shaft with a runout accuracy of 5 μm or less.
· High accuracy and cutting depth during machining prevent problems with axial clearance, drastically improving machining accuracy and efficiency.
[Applications]
· Applicable Materials: Ceramics, Glass, Tool Steel, Alloy Steel, Cemented Carbide, Cermet
ab∗ : | 51.74 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Diamant-Schleifscheibe, Galvanikbindung
MINITOR
[Features]
· Separate type tool to be used in combination with a mandrel (shaft).
· Because the mandrel can be used repeatedly, post-use waste is reduced, resulting in lower costs than tools with shafts.
· Hole Diameter (mm): 1.8
· Applicable Materials: Ceramics, Glass, Tool Steel, Alloy Steel, Cemented Carbide, Cermet, General Steel, Stainless Steel, Aluminum, Copper
ab∗ : | 65.34 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Diamant-Schleifstift, Galvanikbindung/CBN-Schleifstift, Wellendurchmesser 2,34 mm
NAKANISHI
[Features]
· Suitable for a wide range of machining from precision grinding to deburring and engraving.
· With the electrodeposition bond, the grinding abrasive grains protrude more and feature significant concentration to deliver superior grinding force.
ab∗ : | 18.45 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Diamant-Schleifstift für Innenbearbeitung (runde Zylinderspitze)
TRUSCO NAKAYAMA
[Features]
· As the top of the head is rounded, it is suitable for use such as drilling and deburring of small holes.
· Knoop hardness is about 7,000 (the hardest material on earth) so it can be used for most workpieces such as metals, marble, glass, etc. Most suited for workpieces with high hardness such as ceramic materials. However, since diamond does not withstand heat, it is not suitable for machining that involves production of large amounts of heat (HSS, etc.).
[Applications]
· Polishing of curved surfaces, chamfering/deburring.
ab∗ : | 13.09 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
Warenzeichen |
---|
Artikelserie |
ab∗ |
Minimum Lieferzeit |
Classification |
Type |
Particle Size(#) |
Shape |
Material/abrasive |
Diamond Maximum Diameter(mm) |
Diamond Length/Grindstone Length(mm) |
Shaft Diameter(mm) |
|
| ||||||||||||||||||||||||||||||||||||||||||||
Warenzeichen | MISUMI | HONGIA | TRUSCO NAKAYAMA | MINITOR | YANASE | CRYSTON DIAMOND INDUSTRY | MINITOR | CRYSTON DIAMOND INDUSTRY | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | NAKANISHI | NAKANISHI | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | SUMFLEX | SUMFLEX | SUMFLEX | SUMFLEX | SUMFLEX | M & M | M & M | EARTH MAN | M & M | EARTH MAN | M & M | M & M | MINITOR | MINITOR | MINITOR | MINITOR | MINITOR | NAKANISHI | TRUSCO NAKAYAMA |
Artikelserie | Electroplated Diamond Bar, Medium & Precision Finishes【20 Stk. pro Packung】 | Diamant-Schleifstift mit Galvanikbindung (Stahlschaft-Ø3)【1-10 Stk. pro Packung】 | Diamant-Schleifstift DWP (Kerze) (Galvanikbindung) Standardprodukt | Electroplated Diamond Bar (φ3 Steel Shank)【1-30 Stk. pro Packung】 | Electroplated Diamond Bar (φ6 Steel Shank)【1-10 Stk. pro Packung】 | Diamant- und CBN-Schleifstift, Galvanikbindung, für Innenpolieren mit ultrakleinem Durchmesser | Schleifstifte für Innenbearbeitung, 5-teiliges Set (Borazon)【5 Stk. pro Packung】 | Diamant-Schleifstift, Galvanikbindung, Wellendurchmesser 3 mm | Diamant-Schleifstift, Galvanikbindung, Wellendurchmesser 6 mm | Diamant-Schleifstift, Galvanikbindung/CBN-Schleifstift, Wellendurchmesser 2,34 mm | Diamant-Schleifstift für Innenbearbeitung (runde Zylinderspitze) | ||||||||||||||||||||||||||||||||||
ab∗ | 32.63 € *Stückpreis Standardkonfiguration Mengenrabatt | 87.12 € *Stückpreis Standardkonfiguration Mengenrabatt | 8.55 € *Stückpreis Standardkonfiguration Mengenrabatt | 118.78 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.58 € *Stückpreis Standardkonfiguration Mengenrabatt | 17.08 € *Stückpreis Standardkonfiguration Mengenrabatt | 27.12 € *Stückpreis Standardkonfiguration Mengenrabatt | 18.18 € *Stückpreis Standardkonfiguration Mengenrabatt | 10.49 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.64 € *Stückpreis Standardkonfiguration Mengenrabatt | 13.97 € *Stückpreis Standardkonfiguration Mengenrabatt | 10.83 € *Stückpreis Standardkonfiguration Mengenrabatt | 9.24 € *Stückpreis Standardkonfiguration Mengenrabatt | 9.83 € *Stückpreis Standardkonfiguration | 13.11 € *Stückpreis Standardkonfiguration Mengenrabatt | 36.94 € *Stückpreis Standardkonfiguration | 7.29 € *Stückpreis Standardkonfiguration Mengenrabatt | 42.64 € *Stückpreis Standardkonfiguration | 15.84 € *Stückpreis Standardkonfiguration Mengenrabatt | 16.07 € *Stückpreis Standardkonfiguration Mengenrabatt | 7.36 € *Stückpreis Standardkonfiguration Mengenrabatt | 82.27 € *Stückpreis Standardkonfiguration Mengenrabatt | 97.81 € *Stückpreis Standardkonfiguration | 11.05 € *Stückpreis Standardkonfiguration Mengenrabatt | 25.47 € *Stückpreis Standardkonfiguration Mengenrabatt | 25.47 € *Stückpreis Standardkonfiguration Mengenrabatt | 62.17 € *Stückpreis Standardkonfiguration | 26.84 € *Stückpreis Standardkonfiguration Mengenrabatt | 23.48 € *Stückpreis Standardkonfiguration Mengenrabatt | 27.32 € *Stückpreis Standardkonfiguration Mengenrabatt | 28.21 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.93 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.62 € *Stückpreis Standardkonfiguration Mengenrabatt | 16.01 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.37 € *Stückpreis Standardkonfiguration | 16.01 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.33 € *Stückpreis Standardkonfiguration Mengenrabatt | 8.75 € *Stückpreis Standardkonfiguration Mengenrabatt | 21.19 € *Stückpreis Standardkonfiguration Mengenrabatt | 41.98 € *Stückpreis Standardkonfiguration | 45.86 € *Stückpreis Standardkonfiguration | 51.74 € *Stückpreis Standardkonfiguration Mengenrabatt | 65.34 € *Stückpreis Standardkonfiguration | 18.45 € *Stückpreis Standardkonfiguration Mengenrabatt | 13.09 € *Stückpreis Standardkonfiguration Mengenrabatt |
Minimum Lieferzeit | Versand am selben Tag | 4 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 5 Arbeitstage | 12 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 10 Arbeitstage | Versand am selben Tag | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 4 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage |
Classification | Kataphorese-Stange | Kataphorese-Stange | Interner Schleifstein | - | Kataphorese-Stange | Interner Schleifstein | - | - | Interner Schleifstein | Kataphorese-Stange | Kataphorese-Stange | Kataphorese-Stange | Kataphorese-Stange | Kataphorese-Stange | Kataphorese-Stange | Kataphorese-Stange | Interner Schleifstein | Interner Schleifstein | Interner Schleifstein | Interner Schleifstein | Kataphorese-Stange | Kataphorese-Stange | Kataphorese-Stange | - | - | - | Kataphorese-Stange | Kataphorese-Stange | Kataphorese-Stange | Kataphorese-Stange | Kataphorese-Stange | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Type | Produktsatz | Einzelstück / Produktsatz | Einzelstück | - | Einzelstück | Einzelstück | - | - | Einzelstück | Einzelstück / Produktsatz | Einzelstück | Diamantscheibe, Profildorn | Einzelstück / Produktsatz | Einzelstück | Einzelstück | Diamantscheibe, Profildorn | Diamantscheibe, Profildorn | Produktsatz | Einzelstück | Einzelstück | Einzelstück | Produktsatz | Produktsatz | Einzelstück | Diamantscheibe, Profildorn | Diamantscheibe, Profildorn | Einzelstück | Produktsatz | Produktsatz | Produktsatz | Produktsatz | Einzelstück | Produktsatz | Produktsatz | Einzelstück | Produktsatz | Einzelstück | Einzelstück | - | - | - | - | - | - | - |
Particle Size(#) | 100 ~ 200 | 120 ~ 140 | 200 | 80 ~ 320 | 140 | 150 ~ 400 | 220 | - | 120 ~ 800 | 100 ~ 200 | 120 ~ 325 | 140 ~ 200 | 100 ~ 120 | 150 | 100 ~ 1000 | 100 ~ 400 | 120 ~ 325 | - | 325 | 600 | 100 ~ 140 | - | - | 140 | 140 | 140 | 60 | 140 | - | 140 | 140 | 400/600 | 180 | - | 300 | - | 400 | 400 | 120 ~ 600 | 200 | 100 | 140 ~ 1000 | 120 | 130 ~ 400 | 140/170 |
Shape | - | Kegelförmig / Mit Konusgewinde, runde Spitze / Tongari-Ausführung mit abgerundetem Ende / mit Zylinder / Kugelförmig / Gehäuseausführung | mit Zylinder | - | Kegelförmig / Mit Konusgewinde, runde Spitze / Tongari-Ausführung / Tongari-Ausführung mit abgerundetem Ende / mit Zylinder / Kugelförmig / Flach / Gehäuseausführung | mit Zylinder | mit Zylinder | Tongari-Ausführung | mit Zylinder | Kegelförmig / Mit Konusgewinde, runde Spitze / Tongari-Ausführung / Tongari-Ausführung mit abgerundetem Ende / mit Zylinder / Kugelförmig / Oval / Gehäuseausführung / Gehäusekonus / Mit Konusgewinde, flache Spitze | Kegelförmig / mit Zylinder / Kugelförmig / Flach / Gehäuseausführung | - | Ausführung mit Deckplatte / Mit Konusgewinde, runde Spitze / Tongari-Ausführung / Tongari-Ausführung mit abgerundetem Ende / mit Zylinder / Kugelförmig / Oval / Flach / Gehäuseausführung / Mit Konusgewinde, flache Spitze | Kegelförmig | mit Zylinder | Flach | mit Zylinder | mit Zylinder | mit Zylinder | mit Zylinder | Kegelförmig / Mit Konusgewinde, runde Spitze / mit Zylinder / Umgekehrter Kegel / Kugelförmig / Flach / Gehäuseausführung / Mit Konusgewinde, flache Spitze | - | - | Kegelförmig | Flach | Flach | mit Zylinder | mit Zylinder | - | - | - | - | - | - | - | Kugelförmig | - | - | mit Zylinder | mit Zylinder | mit Zylinder | mit Zylinder | - | - | - |
Material/abrasive | Diamant | Diamant | CBN | - | CBN / Diamant | CBN / Diamant | - | - | CBN / Diamant | Diamant | - | - | Diamant | Diamant | Diamant | Diamant | Diamant | Diamant | CBN / Diamant | Diamant | Diamant | Diamant | Diamant | CBN | Diamant | CBN | Diamant | Diamant | Diamant | Diamant | Diamant | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Diamond Maximum Diameter(mm) | - | 1 ~ 5 | - | 19 ~ 21 | 1 ~ 13 | 0.3 ~ 20 | 6 ~ 8 | 3 | 0.3 ~ 15 | 1 ~ 6 | 0.5 ~ 10 | - | 6 ~ 25 | 1.5 ~ 4.8 | - | - | - | - | - | - | - | - | - | - | - | - | 1.5 ~ 2 | 6.5 | - | - | - | - | - | - | - | - | - | - | 0.3 ~ 6 | 6 | 4 | 0.2 ~ 1 | - | 0.7 ~ 2.5 | 3 |
Diamond Length/Grindstone Length(mm) | - | 1 ~ 17 | - | - | 1 ~ 25 | 2 ~ 10 | - | 7.5 ~ 10.5 | 2 ~ 10 | 2 ~ 15 | 0.5 ~ 25 | - | 1.2 ~ 33 | 25 ~ 48 | - | - | - | - | - | - | - | - | - | - | - | - | 3.5 | 15 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Shaft Diameter(mm) | 3 | 3 | 3 | 2.34 ~ 3 | 3 ~ 6 | 3 ~ 10 | 3 | 3 | - | 3 | - | 6 | 6 | 3 | 3 | 3 | 3 | - | 3 | 3 | 1.6 ~ 3 | - | - | 3 | 3 | 3 | 3 | 2.34 | 2.34 | 2.34 | 2.34 | - | - | φ2.35 | - | φ2.35 | - | - | 3 | 3 | 6 | 3 | - | 2.34 | 3 |
Loading...
Helfen Sie uns dabei, unsere Webseite noch weiter zu verbessern.
Bitte geben Sie uns Ihr Feedback zu unserem MISUMI e-Katalog.
Vielen Dank für Ihre Unterstützung.
Bitte nutzen Sie das Anfrageformular, wenn Sie eine umgehende Antwort von uns wünschen.