Lieferzeit |
|
---|
?* Informationen zur Lieferzeit
SUNFLAG
[Features]
· Ultra-thin (22 mm), it is ideal for working in narrow spaces and alongside walls.
· With a convenient ratchet function.
· The torque has been improved even further by the use of shock-resistant gears.
· L-type handle that makes it easy to apply force.
[Applications]
· For work operations in narrow spaces and near walls.
ab∗ : | 11.91 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Kugelkopf-Sechskant-Schraubendreher
SUNFLAG
[Features]
· Can be used for hex socket screws such as cap screws and set screws.
· Even when the tip part wears off, the use of a hex shaft allows cutting the tip for long-term use as a hex wrench.
· The thread hole can be caught easily and turned from an angle.
ab∗ : | 2.67 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 11.72 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 14.22 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 12.03 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 8.84 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 34.59 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 10.29 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 8.47 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Schraubendreher für Rundmuttern
PB SWISS TOOLS
A screwdriver with excellent shock resistance.
[Features]
· It can be used for general applications. Recyclable clip. The 100-6 to 9 is equipped with a square shaft part that allows a wrench to be applied to the shaft.
· The grip surface fits the hand and the groove design is ergonomic, allowing high torque to be applied.
· The high quality and transparent CAB material is extremely resistant to impacts as well as resistant to oil and gasoline, and can be recycled.
· Gentle to the skin and comfortably gripped. Vanilla aromas are blended to suppress smells.
· The shock resistance is 1 t. Resistant to oil and gasoline.
[Applications]
· Ideal for manufacturing industries, assembly sites, repairs, artisan handcrafting, DIY, hobbies, and more.
ab∗ : | 19.30 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Satz Wechsel-Schraubendreher, 8220
PB SWISS TOOLS
[Features]
· PB SWISS GRIP
· The grip has a good feel that enables working for long periods with less burden on workers.
ab∗ : | 97.20 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
1/4 Zoll Sechskant, Bit-Halterklinge für wechselbaren Hochleistungsschraubendreher
PB SWISS TOOLS
225 series bit holder blade. Can be combined and used with 225A handles and multi-torque for the replacement screwdrivers.
ab∗ : | 22.21 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Wechsel-Präzisionsschraubendreher, Klingen (Innensechsrund)
PB SWISS TOOLS
53 series blade. Can be combined and used with 53 TELESCOPE handles for replacement screwdrivers.
ab∗ : | 11.29 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Swiss Grip-Torx Plus-Schraubendreher
PB SWISS TOOLS
[Features]
· Soft-to-the-touch Swiss grip screwdriver.
· T27-T30 include a hexagonal base.
ab∗ : | 13.68 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Schraubendreher, Harz-Griff, lang (mit Durchschlag / Magnet)
KTC(KYOTO TOOL)
[Features]
· Square resin grip which makes it easy to apply force.
· There is a hexagonal part at the base of the shaft.
· Shaft is hexagon shaped.
· Shaft material is Cr-V.
[Applications]
· General purpose tool
ab∗ : | 17.14 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
KTC(KYOTO TOOL)
[Features]
· The ratchet mechanism enables fast turning in both directions for loosening and tightening.
· Fixing the ratchet allows it to be used as a normal screwdriver.
[Applications]
· General purpose tool
ab∗ : | 39.04 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Torx®-Schraubendreher, Harz-Griff, T-förmig, manipulationssicher
KTC(KYOTO TOOL)
[Features]
· Using the hexagon affixed to the base of the shaft, a wrench can be used to aid in turning.
· Tip shape can be determined by size display on grip end.
[Applications]
· General purpose tool
ab∗ : | 17.53 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 2.89 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 18.18 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 4.92 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 12.42 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 62.74 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Mikro-Schraubendreher, D-66 / D-67
HOZAN
A micro-sized screwdriver that's turned with fingertips, convenient for carrying, and can be stored anywhere.
[Features]
· Size that is easy to use even in narrow locations. For small screws that do not require force.
· The handle is designed at a length suitable for fingertip turning; while unsuitable for firmly tightened screws, it is effective for rapid turning.
· The tip size is No. 00, making it convenient for fine-tuning trims, trimmers, semi-fixed volume knobs, etc.
· The size and price allow placement where adjustment is necessary.
[Applications]
· Ideal for screws that are difficult to use with general drivers such as those for cameras and optical devices.
· For easily carrying glasses screws in the corners of pen cases, for regulation and for precision machines.
· Since its thin handle does not allow application of torque, it can be used securely for machine screws on instruments and fixtures which can break when too much strength is applied.
ab∗ : | 0.94 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Schraubendreher mit Anti-Fall-Ring
ANEX
The cord does not tangle, even when the handle is turned by the rotating cap. With ring for attaching fall prevention cord. Ideal for work in high places.
ab∗ : | 7.03 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 48.85 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 22.44 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
ab∗ : | 14.80 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
ab∗ : | 7.61 € |
---|---|
Minimum Lieferzeit : | 6 Arbeitstage |
*Stückpreis Standardkonfiguration
Schraubendreher, Holzgriff, durchgehend (starke Klasse)
ANEX
[Features]
· High accuracy, black point finish screwdriver with magnet.
ab∗ : | 13.85 € |
---|---|
Minimum Lieferzeit : | 9 Arbeitstage |
*Stückpreis Standardkonfiguration
VESSEL
Der Hauptkörper ist aus Edelstahl (Kappe des Endes aus Harz hergestellt ist).
Für die Montage, Reparatur und Demontage von Präzisionsvorrichtungen, Abstandshalter, Spielzeug, etc.
ab∗ : | 13.88 € |
---|---|
Minimum Lieferzeit : | 5 Arbeitstage |
*Stückpreis Standardkonfiguration
HOZAN
Driver for adjusting the ferrite core and pre-set knobs (with and without dial).
[Features]
· Material adopts polyacetal excellent in high insulation and wear resistance.
· It does not damage the core or cause misalignment.
· Tip size: 1.9 x 0.9, 1.95 / 2.0 / 2.6 / 2.65.
ab∗ : | 1.45 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
HOZAN
A dedicated screwdriver convenient for attaching/detaching valve cores of American type valves (for tire tubes).
[Features]
· The handle is hexagonal which makes it easy to turn fast.
· Handle diameter 10.0 mm φ.
· Weight: 20 g.
[Applications]
· Attachment and removal of the valve core of American type valves (for tire tubes).
ab∗ : | 3.61 € |
---|---|
Minimum Lieferzeit : | Versand am selben Tag |
*Stückpreis Standardkonfiguration
Kurzer SUS-Schraubendreher, SSSD-M2
MAEDAKINNZOKU
An all-stainless steel stubby flathead screwdriver which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
[Features]
· The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.
· Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
[Applications]
· Ideal for food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development.
· Ideal for places that use stainless steel bolts and nuts such as plants, waterproofing work, plumbing and cleaning equipment.
ab∗ : | 30.70 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
MAEDAKINNZOKU
An all-stainless steel flathead screwdriver which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
[Features]
· The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.
· Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
[Applications]
· Ideal for food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development.
· Ideal for places that use stainless steel bolts and nuts such as plants, waterproofing work, plumbing and cleaning equipment.
ab∗ : | 39.77 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
MAEDAKINNZOKU
Lightweight, all-stainless flathead screwdriver with excellent workability and corrosion resistance.
[Features]
· The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.
· Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
[Applications]
· Food-related equipment, medical equipment, cleanrooms, precision machinery, and ships.
· For marine sports, marine development, plants, waterproof construction and water supply construction.
· Ideal for places that use stainless steel bolts and nuts such as cleaning equipment.
ab∗ : | 47.50 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Piercing-Schraubendreher, KPD-001
MAEDAKINNZOKU
Square shaft through screwdriver.
[Features]
· Plastic grip.
· Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
· The tip has a high-strength magnet.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
ab∗ : | 4.49 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Piercing-Schraubendreher, KPD-003
MAEDAKINNZOKU
A piercing square-shafted driver with a plastic grip.
[Features]
· Phillips shaft length: 150 mm, total length: 260 mm.
· Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
· The tip has a high-strength magnet.
[Applications]
· Convenient for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
ab∗ : | 8.97 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Langschaft-Schraubendreher (Durchgehend), KLD-M3
MAEDAKINNZOKU
With a flathead tip of 1.0 x 9.0 and total length of 380 mm, it is ideal for work at places where standard long shaft screwdrivers cannot reach.
[Features]
· Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
· The tip has a high-strength magnet.
· Through-hole type.
· Total length: 380 mm.
· 275 mm shaft length.
[Applications]
· Ideal for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
ab∗ : | 14.19 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Langschaft-Schraubendreher (Durchgehend), KLD-P
MAEDAKINNZOKU
Ideal for work at places where standard long shaft screwdrivers cannot reach.
[Features]
· Cross-recessed end +No.2, total length 380 mm.
· Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
· A through type with magnetic tip with axial length of 275 mm.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
ab∗ : | 14.19 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Keramik-Abgleichschraubendreher, D-271 / D-272 / D-275
HOZAN
A long screwdriver that's convenient for adjustment inside equipment.
[Features]
· Uses zirconia ceramic that stands out among fine ceramics specifically for its exceptional strength and elasticity.
· Has high abrasion resistance and maintains cutting edge precision for a long time even for tip-type semi-fixed knob adjustment work.
[Applications]
· The 110 mm long shaft makes it ideal for adjusting parts in deep places.
ab∗ : | 16.85 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Kurzer Wechsel-Schraubendreher, D-59
HOZAN
Stubby screwdriver with interchangeable shaft.
[Features]
· The tip is a combination of Phillips and flathead shapes.
[Applications]
· The screwdriver cannot be used for purposes other than turning screws.
· Cannot be used on live electrical equipment.
ab∗ : | 5.16 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Auswechselbarer Keramik-Abgleichschraubendreher, D-281
HOZAN
A perfect driver for adjusting pre-set knobs/capacitors on printed circuit boards.
[Features]
· Uses zirconia ceramic that does not cause coil misalignment.
· Has greater durability against wear and damage than alumina ceramics.
* Alumina ceramic: Fine ceramic. Besides abrasion resistance, it is excellent in heat and chemical resistance.
· Combination contents: D-281, Phillips No.0 (D-284), cross-shaped, blade width 1.7 mm (D-285).
ab∗ : | 28.99 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
MAEDAKINNZOKU
An all-stainless steel Phillips screwdriver which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
[Features]
· This stainless steel tool is made of martensitic material that emphasizes strength, is rust resistant, and has excellent corrosion resistance, chemical resistance and hygienic properties.
[Applications]
· Food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development, plants, waterproofing construction, and plumbing work.
· Ideal for places that use stainless steel bolts and nuts such as cleaning equipment.
ab∗ : | 47.50 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
MAEDAKINNZOKU
An 8-piece all-stainless steel screwdriver set, which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
[Features]
· The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.
· Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
[Applications]
· Ideal for food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development.
· Ideal for places that use stainless steel bolts and nuts such as plants, waterproofing work, plumbing and cleaning equipment.
ab∗ : | 253.38 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
MAEDAKINNZOKU
Flathead stubby screwdriver with an overall length of 70 mm.
[Features]
· The total length is short, making it ideal for working in narrow places.
[Applications]
· Automobile interiors, and maintenance of motorcycles, bicycles, and machinery.
ab∗ : | 3.68 € |
---|---|
Minimum Lieferzeit : | 4 Arbeitstage |
*Stückpreis Standardkonfiguration
Warenzeichen |
---|
Artikelserie |
ab∗ |
Minimum Lieferzeit |
Tip standards |
Tip size / Phillips (+) |
Tip size / flathead (-) blade width (mm) B1 |
Shaft length L (mm) |
Single Product/Set Classification |
Shaft type |
Magnet |
Shaft through |
Bolster |
Grip Type |
Tip size / flathead (-) blade thickness (mm) B2 |
(Box/Hex/Ball-Point) Width Across Flats (mm) |
(Box/Hex/Ball-Point) Width Across Flats (inch) |
Warenzeichen | SUNFLAG | SUNFLAG | WERA | WERA | WERA | WERA | WERA | WERA | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | KTC(KYOTO TOOL) | E VALUE | E VALUE | SK 11 | WIHA | ENGINEER | HOZAN | ANEX | ANEX | WERA | SIGNET | BESTTOOL | ANEX | VESSEL | HOZAN | HOZAN | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU | HOZAN | HOZAN | HOZAN | MAEDAKINNZOKU | MAEDAKINNZOKU | MAEDAKINNZOKU |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Artikelserie | 1/4 Zoll Sechskant, Bit-Halterklinge für wechselbaren Hochleistungsschraubendreher | Schraubendreher, Harz-Griff, lang (mit Durchschlag / Magnet) | Torx®-Schraubendreher, Harz-Griff, T-förmig, manipulationssicher | Antistatischer Präzisions-Kugelkopf-Sechskantschraubendreher | Keramik-Abgleichschraubendreher (mit rotierender Kappe), DK-91 | ||||||||||||||||||||||||||||||||||||||||
ab∗ | 11.91 € *Stückpreis Standardkonfiguration | 2.67 € *Stückpreis Standardkonfiguration | 11.72 € *Stückpreis Standardkonfiguration | 14.22 € *Stückpreis Standardkonfiguration | 12.03 € *Stückpreis Standardkonfiguration | 8.84 € *Stückpreis Standardkonfiguration | 34.59 € *Stückpreis Standardkonfiguration Mengenrabatt | 10.29 € *Stückpreis Standardkonfiguration | 8.47 € *Stückpreis Standardkonfiguration | 19.30 € *Stückpreis Standardkonfiguration Mengenrabatt | 97.20 € *Stückpreis Standardkonfiguration | 22.21 € *Stückpreis Standardkonfiguration Mengenrabatt | 11.29 € *Stückpreis Standardkonfiguration Mengenrabatt | 13.68 € *Stückpreis Standardkonfiguration | 17.14 € *Stückpreis Standardkonfiguration | 39.04 € *Stückpreis Standardkonfiguration Mengenrabatt | 17.53 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.89 € *Stückpreis Standardkonfiguration | 18.18 € *Stückpreis Standardkonfiguration | 4.92 € *Stückpreis Standardkonfiguration | 12.42 € *Stückpreis Standardkonfiguration | 62.74 € *Stückpreis Standardkonfiguration | 0.94 € *Stückpreis Standardkonfiguration | 7.03 € *Stückpreis Standardkonfiguration | 48.85 € *Stückpreis Standardkonfiguration Mengenrabatt | 22.44 € *Stückpreis Standardkonfiguration | 14.80 € *Stückpreis Standardkonfiguration Mengenrabatt | 7.61 € *Stückpreis Standardkonfiguration | 13.85 € *Stückpreis Standardkonfiguration | 13.88 € *Stückpreis Standardkonfiguration | 1.45 € *Stückpreis Standardkonfiguration | 3.61 € *Stückpreis Standardkonfiguration | 30.70 € *Stückpreis Standardkonfiguration | 39.77 € *Stückpreis Standardkonfiguration | 47.50 € *Stückpreis Standardkonfiguration | 4.49 € *Stückpreis Standardkonfiguration Mengenrabatt | 8.97 € *Stückpreis Standardkonfiguration | 14.19 € *Stückpreis Standardkonfiguration | 14.19 € *Stückpreis Standardkonfiguration Mengenrabatt | 16.85 € *Stückpreis Standardkonfiguration | 5.16 € *Stückpreis Standardkonfiguration | 28.99 € *Stückpreis Standardkonfiguration | 47.50 € *Stückpreis Standardkonfiguration | 253.38 € *Stückpreis Standardkonfiguration | 3.68 € *Stückpreis Standardkonfiguration Mengenrabatt |
Minimum Lieferzeit | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 4 Arbeitstage | Versand am selben Tag | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 6 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 4 Arbeitstage | Versand am selben Tag | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | Versand am selben Tag | 6 Arbeitstage | 9 Arbeitstage | 5 Arbeitstage | 4 Arbeitstage | Versand am selben Tag | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage | 4 Arbeitstage |
Tip standards | Kreuzschlitz (+)/Senkkopf (-) | Kugelkopf | Kreuzschlitz (+) / Senkkopf (-) | Kreuzschlitz (+) / Senkkopf (-) | Senkkopf (-) | Kreuzschlitz (+) / Senkkopf (-) | - | Sonstige | Senkkopf (-) | Sonstige | Kombination | - | Torx | Torx | Kreuzschlitz (+) / Senkkopf (-) | Packung / Kombination | Torx | Kombination | Kombination | Kreuzschlitz (+) | Kugelkopf | Kreuzschlitz (+)/Senkkopf (-) | Kreuzschlitz (+) / Senkkopf (-) | Kreuzschlitz (+) / Senkkopf (-) | Kombination | - | Kreuzschlitz (+)/Senkkopf (-) | Sonstige | Senkkopf (-) | - | Kombination | - | Senkkopf (-) | Senkkopf (-) | Senkkopf (-) | Kreuzschlitz (+) | Kreuzschlitz (+) | Senkkopf (-) | Kreuzschlitz (+) | Kreuzschlitz (+) / Senkkopf (-) | Kreuzschlitz (+)/Senkkopf (-) | Kreuzschlitz (+) | Kreuzschlitz (+) | Kreuzschlitz (+)/Senkkopf (-) | Senkkopf (-) |
Tip size / Phillips (+) | - | - | Nr. 0 / Nr. 1 / Nr. 2 / Nr. 3 / Nr. 4 | Nr. 1 / Nr. 2 / Nr. 3 / Nr. 4 | - | Nr. 1 / Nr. 2 / Nr. 3 | - | - | - | - | Nr. 0 / Nr. 1 / Nr. 2 | - | - | - | Nr. 1 / Nr. 2 / Nr. 3 | Nr. 2 | - | Nr. 00 | Nr. 0 / Nr. 1 / Nr. 2 / Nr. 3 | Nr. 2 | - | Sonstige | Nr. 00 | Nr. 2 | Nr. 1 / Nr. 2 / Nr. 3 | - | Nr. 2 | - | - | - | - | - | - | - | - | Nr. 1 | Nr. 3 | - | Nr. 2 / Nr. 3 | Nr. 0 | Nr. 2 | Nr. 0 | Nr. 3 | Nr. 1 / Nr. 2 / Nr. 3 | - |
Tip size / flathead (-) blade width (mm) B1 | 6 | - | 5 ~ 12 | 3.5 ~ 14 | 7 ~ 8 | 3.5 ~ 8 | - | - | 2 ~ 18 | - | 2 ~ 5 | - | - | - | 5.5 ~ 8 | 6 | - | 1.6 | 4 ~ 6 | - | - | 0.9 ~ 2.5 | 1.8 | 6 | 6 | - | 6 | - | 10 | - | 1.9 | - | 6 | 6 | 8 | - | - | 9 | - | 1.3 ~ 1.8 | 6 | - | - | 5.5 ~ 8 | 7.2 |
Shaft length L (mm) | - | 51 ~ 122 | 60 ~ 300 | 80 ~ 250 | 150 ~ 175 | 25 | - | 105 ~ 107 | 70 ~ 240 | - | 50 ~ 120 | - | - | 50 ~ 125 | 300 | - | 75 ~ 150 | - | - | 125 | 50 ~ 60 | 15 ~ 18 | 23 | 100 ~ 150 | - | - | - | - | 250 ~ 300 | - | - | 25 | 35 | 100 | 150 | 76 | 153 | 275 | 275 | 110 | 17 | - | 150 | 35 ~ 150 | 23 |
Single Product/Set Classification | Produktsatz | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Produktsatz | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Produktsatz | Einzelstück / Produktsatz | Produktsatz | Produktsatz | Einzelstück | Einzelstück | Produktsatz | Einzelstück | Einzelstück | Produktsatz | Einzelstück | Einzelstück | Produktsatz | Einzelstück | - | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Einzelstück | Produktsatz | Einzelstück | Produktsatz | Einzelstück |
Shaft type | - | Quadratisch | Rund | Rund | Rund | Rund | - | Rund | Rund | Rund | Rund | - | Rund | Rund | Rund | Quadratisch | Quadratisch | Rund | - | Rund | Rund | Rund | Rund | Rund | - | - | - | - | Rund | - | - | Rund | Rund | Rund | Rund | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Rund | Rund | Rund | Rund | Rund | Quadratisch |
Magnet | N/A | N/A | N/A | N/A | N/A | N/A | - | N/A | N/A | N/A | N/A | - | N/A | N/A | Verfügbar | N/A | N/A | N/A | N/A | Verfügbar | N/A | N/A | N/A | N/A | N/A | - | N/A | N/A | Verfügbar | - | - | N/A | N/A | N/A | N/A | Verfügbar | Verfügbar | Verfügbar | Verfügbar | N/A | N/A | N/A | N/A | N/A | Verfügbar |
Shaft through | - | N/A | N/A | Verfügbar | N/A | N/A | - | N/A | N/A | N/A | N/A | - | - | N/A | Verfügbar | - | N/A | - | - | N/A | N/A | N/A | N/A | N/A | - | - | - | - | Verfügbar | - | - | - | N/A | N/A | N/A | Verfügbar | Verfügbar | Verfügbar | Verfügbar | N/A | - | - | N/A | N/A | N/A |
Bolster | - | N/A | N/A | im Lieferumfang enthalten / N/A | N/A | N/A | - | N/A | N/A | N/A | N/A | - | - | im Lieferumfang enthalten / N/A | im Lieferumfang enthalten | - | im Lieferumfang enthalten | - | - | N/A | N/A | N/A | N/A | N/A | - | - | - | - | N/A | - | - | - | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | - | - | N/A | N/A | N/A |
Grip Type | Kunststoff | Kunststoff | Kautschuk | Kautschuk | Kautschuk | Kautschuk | Kautschuk | Kautschuk | Kunststoff | Kunststoff | Kunststoff | - | - | Kunststoff | Kunststoff | Kautschuk | Kunststoff | Edelstahl | Kunststoff | Kunststoff | Kautschuk | Kunststoff | Kunststoff | Kautschuk | Kunststoff | Kautschuk | Kunststoff | Edelstahl | Holzgriff | - | Kunststoff | Kautschuk | Edelstahl | Edelstahl | Edelstahl | Kunststoff | Kunststoff | Kunststoff | Kunststoff | Kunststoff | Kautschuk | Kunststoff | Edelstahl | Edelstahl | Kunststoff |
Tip size / flathead (-) blade thickness (mm) B2 | - | - | - | - | - | - | - | - | 0.3 ~ 3 | - | 0.3 ~ 0.8 | - | - | - | 0.8 ~ 1.2 | - | - | - | - | - | - | 0.35 ~ 0.7 | 0.3 | - | - | - | - | - | 1.2 | - | 0.9 | - | 0.8 | 1 | 1.1 | - | - | 1 | - | 0.4 | 0.8 | - | - | 0.8 ~ 1.1 | 0.8 |
(Box/Hex/Ball-Point) Width Across Flats (mm) | - | 1.5 ~ 10 | - | - | - | - | - | - | - | - | - | - | - | - | - | 1.5 ~ 10 | - | - | 2 ~ 6 | - | 1.5 ~ 3 | - | - | - | 2.5 ~ 6 | - | - | - | - | - | 1.95 ~ 2.65 | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
(Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Helfen Sie uns dabei, unsere Webseite noch weiter zu verbessern.
Bitte geben Sie uns Ihr Feedback zu unserem MISUMI e-Katalog.
Vielen Dank für Ihre Unterstützung.
Bitte nutzen Sie das Anfrageformular, wenn Sie eine umgehende Antwort von uns wünschen.