HOZAN Schraubendreher
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
Auswechselbarer Keramik-Abgleichschraubendreher, D-280
HOZAN
· A perfect driver for adjusting pre-set knobs/capacitors on printed circuit boards.
[Features]
· Uses zirconia ceramic that does not cause coil misalignment.
· Has greater durability against wear and damage than alumina ceramics.
* Alumina ceramic: Fine ceramic. Besides abrasion resistance, it is excellent in heat and chemical resistance.
[Applications]
· Combination: D-280, -0.9 x -1.8 mm, blade thickness 0.4 mm (D-282), -1.3 x -2.6 mm, blade thickness 0.4 mm (D-283).- Mengenrabatt
ab∗ ： 69.44 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
Kegelreibahle, K-441 / K-442 / K-443 / K-444
HOZAN
A taper reamer that boasts outstanding sharpness and durability.
[Features]
· K-441, K-442, K-443 and K-444 are available.
· Can be used in various applications according to the hole diameters and taper angles.
· Perfect for work that requires application of torque as it comes with a handle.
· Allows cutting by rotating clockwise.
· Excellent sharpness and outstanding durability.
[Applications]
· Ideal for modification and enlargement of holes in metal plates, aluminum plates, thin iron plates, etc.- Mengenrabatt
ab∗ ： 13.68 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Stiftkloben, K-501
HOZAN
Vise driver for grasping small diameter drills and rotating them, and grasping pin (rod) shaped objects securely.
[Features]
· Features a rotary head with embedded ball bearings, which offers great workability.
· Vise for small diameter drills with rotating cap.
· It can be smoothly rotated while pushing in the vertical direction.
· With non-slip knurled grip, it is unlikely to slip and easy to rotate. It also has a thick body that makes it easy to apply force.
· It has built-in collets with 4 sizes that can be exchanged to correspond to a wide range of drill diameters.
· The inner collet and main body are throughcut, allowing even long objects to be inserted and fixed to the back depending on the diameter.
[Applications]
· It can also be used for etching by grasping a needle (probe), etc.- Mengenrabatt
ab∗ ： 27.53 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Schlagschrauber, D-963
HOZAN
Impact screwdriver that can be switched between left and right rotation.
[Features]
· Rusted screws can be loosened easily by hitting it with the hammer as the screwdriver bit rotates at high torque.
· It uses a flanged protective grip that protects the hand.
· Removing the bit holder allows a 12.7 mm square socket to be attached.
· Case included.
[Applications]
· Ideal for turning screws, etc. that take effort to loosen.- Mengenrabatt
ab∗ ： 4.73 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Stiftkloben, K-502
HOZAN
Fine drill pin vise for applications including but not limited to grasping small diameter drills and rotating them, including grasping pin (rod) shaped objects securely.
[Features]
· As the main body is compact, it is easy to see the work at hand.
· Also, there is less load in continuous work as it is a light finish.
· Body is rather thick which makes it easy to apply force, and it has line knurling which makes it anti-slip and easy to turn.
[Applications]
· It can also be used for drilling on precision parts and substrates, for plastic models, for etching by grasping a needle (probe), etc.
· A fixed-type collet, body-integral, compact single-head type.- Mengenrabatt
ab∗ ： 12.01 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
Keramik-Abgleichschraubendreher, Satz, D-17
HOZAN
A long screwdriver that's convenient for adjustment inside equipment.
[Features]
· With a sewn case that is resistant to friction and pulling.
· Uses zirconia ceramic that stands out among fine ceramics specifically for its exceptional strength and elasticity.
· Has high abrasion resistance and maintains cutting edge precision for a long time even for tip-type semi-fixed knob adjustment work.
[Applications]
· The 110 mm long shaft makes it ideal for adjusting parts in deep places.- Mengenrabatt
ab∗ ： 64.90 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Präzisions-Schraubendreher, 6er-Satz【6 Stk. pro Packung】
HOZAN
High-precision screwdriver set with high versatility.
[Features]
· A set of +No.0/+No.1/-1.2 x 0.32/-1.8 x 0.32/-2.3 x 0.35/-3.0 x 0.45.
· Sewn case included.
[Applications]
· Ideal for fast turning of small screws thanks to its rotary-type head that provides high workability.ab∗ ： 24.23 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
LED-Elektroschrauber, D-745
HOZAN
An LED type inspection screwdriver with high visibility.
[Features]
· Batteries can be changed.
· Applicable ranges: 100 to 240 VAC, tip size of 2.5 x 0.6 mm, total length of 139 mm, shaft length of 17 mm, shaft diameter of 2.5 mm.
· Handle diameter 16 mm, weight 23 g.
· Be sure to check the light before use.
· Be careful of short circuit and electric shock.
[Applications]
· Used for determining AC polarity and checking electrical conductance.
· Can be used within the applicable range.- Mengenrabatt
ab∗ ： 14.71 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
|
|
|
|
| |
| Warenzeichen | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN | HOZAN |
| Artikelserie | ||||||||
| ab∗ | 69.44 € *Stückpreis Standardkonfiguration Mengenrabatt | 13.68 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 27.53 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.73 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.01 € *Stückpreis Standardkonfiguration Mengenrabatt | 64.90 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 24.23 € *Stückpreis Standardkonfiguration | 14.71 € *Stückpreis Standardkonfiguration Mengenrabatt |
| Minimum Lieferzeit ： | 6 Arbeitstage | Versand am selben Tag | 7 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | Versand am selben Tag | 7 Arbeitstage | 6 Arbeitstage |
| Tip standards | Senkkopf (-) | Sonstige | - | Kreuzschlitz (+) / Senkkopf (-) / Kreuzschlitz (+)/Senkkopf (-) | - | Kreuzschlitz (+)/Senkkopf (-) | Kreuzschlitz (+)/Senkkopf (-) | Senkkopf (-) |
| Tip size / Phillips (+) | - | - | - | Nr. 2 / Nr. 3 / Nr. 4 | - | Nr. 0 | Nr. 0 / Nr. 1 | - |
| Tip size / flathead (-) blade width (mm) B1 | 0.9 ～ 2.6 | - | - | 8 ～ 10 | - | 1.3 ～ 1.8 | 1.2 ～ 3 | 2.5 |
| Shaft length L (mm) | - | - | - | 36 ～ 80 | - | 110 | - | 17 |
| Single Product/Set Classification | Produktsatz | Einzelstück | Einzelstück | Einzelstück / Produktsatz | Einzelstück | Produktsatz | Produktsatz | Einzelstück |
| Shaft type | Rund | - | - | Quadratisch | - | Rund | Rund | Rund |
| Magnet | N/A | - | - | N/A | - | N/A | N/A | N/A |
| Shaft through | - | - | - | - | - | N/A | N/A | N/A |
| Bolster | - | - | - | - | - | N/A | N/A | N/A |
| Grip Type | Kunststoff | Edelstahl | - | Kautschuk | - | Kunststoff | Edelstahl | Kunststoff |
| Tip size / flathead (-) blade thickness (mm) B2 | 0.4 | - | - | - | - | 0.4 | 0.32 ～ 0.45 | 0.6 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | - | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - | - | - | - | - |
Loading...
Filtern nach:
Stock
-
- Stock Items Included
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Tip standards
- Kreuzschlitz (+)
- Senkkopf (-)
- Kreuzschlitz (+)/Senkkopf (-)
- Torx
- Packung
- Sechskant
- Kugelkopf
- Kombination
- Sonstige
-
Tip size / Phillips (+)
-
Tip size / flathead (-) blade width (mm) B1
-
Shaft length L (mm)
-
Single Product/Set Classification
-
Shaft type
-
Magnet
- Verfügbar
- N/A
-
Shaft through
- Verfügbar
- N/A
-
Bolster
- im Lieferumfang enthalten
- N/A
-
Grip Type
- Kunststoff
- Holzgriff
- Kautschuk
- Edelstahl
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Suchergebnisse durch Herstellerauswahl einschränken
-
- WIHA (185)
- VESSEL (40)
- PB SWISS TOOLS (38)
- MAEDAKINNZOKU (35)
- ANEX (31)
- WERA (25)
- TRUSCO NAKAYAMA (24)
- KTC(KYOTO TOOL) (19)
- ENGINEER (15)
- PHOENIX CONTACT (10)
- SK 11 (9)
- HOZAN (8)
- GEDORE (7)
- BAHCO (6)
- SUNFLAG (5)
- CIMCO (4)
- BERNSTEIN AG (4)
- HAZET (4)
- KNIPEX (4)
- HIRAI KOGU (3)
- TRAD (3)
- WOLFCRAFT (2)
- EIGHT TOOL (2)
- E VALUE (2)
- SMATO (2)
- SIGNET (2)
- SUEKAGE TOOL (2)
- FACOM (2)
- AS ONE (1)
- HANDIWORK (1)
- MATADOR (1)
- OSG (1)
- PROXXON MICROMOT (1)
- RITTAL (1)
- WEIDMÜLLER (1)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Schraubendreher
-
- Ratschenschlüssel / Ringschlüssel / Schraubenschlüssel
- Steckschlüssel
- Innensechskantschlüssel
- Sechsrund-Schlüssel (TX/E)
- Schraubendreher
- Bits für Schraubendreher / Schraubendrehereinsätze
- Blechbearbeitung
- Zangen / Kneifzangen / Pinzetten
- Universalschlüssel
- Werkzeuge für Wasserversorgungs-/Klimaleitungen
- Werkzeuge für Elektroanlagen
- Werkzeug-Sets/Werkzeugkästen
- Pinzetten, Klemmen, Zangen
- Fahrzeug-Wartungswerkzeuge
-
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.