OMRON Zeitschalter/Kalender-Zeitschalter

?* Informationen zur Lieferzeit und Preisen

• • Empfehlung

  

  Digitaler Timer H5CX-N

  OMRON

  [Features]
  · Even easier to view and easier to use.
  · The no. 1 digital timer has advanced further.
  · Basic functions, 59 mm deep (terminal platform AC24V/DC12 to 24V type) ultra short barrel body.
  · High visibility using 12 mm high alphanumerics (four digit type).
  · Switch-over possible between three colors (red / green / orange) of alphanumerics (first display).
  · The power source circuit and the input circuit are completely isolated, safe/worry free.
  · Newly incorporates a "set value limit function" and "output iterations counter function."
  · The front part can be white or light gray.
  · Series addition with instantaneous connection.

  ab∗ ：	276.30 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Empfehlung

  

  Solid State Timer H3Y

  OMRON

  [Features]
  · Ultra-small timer for use in sequence control incorporating a dedicated IC.
  · High precision with a repeat error of ±1% (including first time value).
  · Recover time including recovery during operation is less than 100ms.
  · Easy time setting using the large dial in common with the +- driver.
  · Semi-multi power source voltages.
  · A standard product which acquired UL, CSA standards.
  · EN61812-1 Compatible, corresponds to the CE mark.

  • Mengenrabatt

  ab∗ ：	45.05 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Zeitrelais, Ausschaltverzögert H3DT-H

  OMRON

  Value Design for Panel supported product that increases control panel value.
  Power OFF-delay timers allow you to set two time ranges with each timer, from 0.1 to 12 seconds for the S Series and from 1.0 to 120 seconds for the L Series.
  
  ■ Features
  · Introducing the advanced H3DT timer, based on a new concept.
  It has been 80 years since the production of OMRON's first product, an X-ray timer.
  　Provides more value to the customer, taking control panels to a new level.
  · The top class in industry*1 for low power consumption
  Power consumption is low, which reduces the DC power supply load for the entire control panel.
  · Push-in Plus terminal blocks for easy wiring.
  Just insert wires, no tools required.
  　Use Push-In Plus terminal blocks to reduce the time and work involved in wiring.
  · Certified for safety standards of major countries.
  The Timers help to reduce the work involved in control panel design
  with certifications and compliance for various standards, including UL Listing.
  
  *1. According to OMRON investigation in November 2015

  ab∗ ：	124.32 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Solid State Timer H3CR-F / -G / -H

  OMRON

  [Features]
  · A series based on twin timer, star delta timer.
  · UL, CSA, LR, NK, CCC acquired, EN61812-1 compatible safe design.
  · Compatible with the CE mark.
  · Because the time units enable separate ON time and OFF time setting, combinations of long term ON or OFF and short time ON or OFF are possible.
  · Product line-up with the two types of operational mode of start flicker ON and start flicker OFF.
  · Power sources for any low voltage (AC24 to 48/DC12 to 48V), any high voltage (AC100 to 240V/DC100 to 125V).
  · 24 types of time ranges can be selected from among 0.05 seconds to 300 hours.
  · Instantaneous output of 0 setting is possible.
  · Because there is instantaneous output by revolving the scale in the direction of 0, the checking of the sequence operation and the like is simple.
  · UL, CSA, NK, LR, CCR acquired, EN61812-1 compatible.
  · Corresponds to the CE mark.

  • Mengenrabatt

  ab∗ ：	92.99 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Solid State Timer H3CR-A

  OMRON

  [Features]
  · Multiple time ranges and operational modes.
  · DIN48 × 48 mm full multiple timer.
  · Two types of AC / DC free power supply, drastically reducing the number of models in stock.
  · Can deal with a variety of applications with eight operational modes (11 pin type) or five operational modes (8 pin type).
  · An economical design with reduced power consumption.
  · 0 Setting instantaneous output which facilitates sequence check.
  · Socket (type P3G-08) attached, 75 mm neck-down short barrel type (Type H3CR-A8EAC100 to 240V/DC100 to 125V).
  · PNP input types are also available in the lineup.
  · UL, CSA, NK, LR, CCC acquired, EN61812-1 compatible, corresponds to the CE mark.

  • Mengenrabatt

  ab∗ ：	54.54 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Solid State Timer H3YN

  OMRON

  [Features]
  · Type H3Y and implements multiple time ranges and multiple operational modes in the same shape.
  · Moreover, compatible with the EN standard.
  · Implements multiple time ranges and operational modes.
  · Semi-multi power source voltages.
  · Type MY power relay and pin compatible.
  · A small scale UL contributing to space saving. CSA standard acquired.
  · EN61812-1 compatible, corresponds to the CE mark.
  · Can deal with multiple time ranges with switch-over between four ranges.
  · Can deal with four roles of multi-operational modes in one apparatus.
  · Type MY relay and terminal compatible.
  · Compatible with the EN standard, so OK for export to Europe.
  · Deals with reducing inventory volumes by semi-multi power voltage compatibility.

  ab∗ ：	59.31 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Digitaler Timer H5CZ

  OMRON

  Unbeatable ease-of-use combined with economy.
  
  [Features]
  .
  · Changing each digit up/down is a simple operation with a see-saw key.
  · Simplified "digitization" of an analog timer.
  · Timer, twin timer implement in one apparatus.
  
  · Power source circuit and input circuit are isolated from each other in the timer.
  · An upper limit of the setting value can be set, preventing mis-operation by the output apparatus due to erroneous setting.
  · Contributes to estimation of lifetime of the timer and load with the output time counter.
  .
  · A line-up with an instantaneous connection point type.
  · Water resistant/dust resistant structure (UL 508 Type 4X: IP66).
  · Implements a key protect function.

  • Mengenrabatt

  ab∗ ：	133.54 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Summenzähler / Betriebsstundenzähler (DIN 48 × 24) H7GP

  OMRON

  [Features]
  · Easy to view IP66 oil-resistant level water resistance, and oil resistance DIN48 × 24 size total counter / time counter.
  · By employing a negative type alphanumeric height of 8.5 mm LCD and red colored LED with back-light, a similar high visibility to LED implements low power consumption.
  · By using an integrated front part and casing and oil resistant parts materials, IP66 oil resistant NEMA4.
  · Implements a short barrel shape with a neck-down length of 80 mm.
  · Flip switches NPN and PNP to deal with each input mode.
  · Can be both externally reset and manually reset.
  · With a finger safe terminal block cover for protection against electric shocks, which conforms to VDE0106Part100.
  · Safety standard UL, CSA acquired.
  · EMC (EN61326) compatible, corresponds to the CE mark.

  • Mengenrabatt

  ab∗ ：	198.96 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Quarz-Timer H5AN

  OMRON

  [Features]
  · The time range has become wider DIN72 × 72 mm quartz timer.
  · 1/100th of a second to 9999 hours are covered by one apparatus.
  · For the first time, the timer incorporates an external power source supply, and all kinds of sensors can be connected directly.
  · Maintenance is possible by removing the wiring from the main body by a draw-out structure.
  · The power sources are AC100 to 240V, the product line-up also includes DC specifications.
  · The control output simultaneously enabled contact and non-contact connection.
  · The standard product has acquired UL and CSA standard.

  • Mengenrabatt

  ab∗ ：	258.56 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Quarz-Timer H5CN

  OMRON

  [Features]
  · A complete series DIN48 × 48 mm of quartz timers.
  · 9.999s, 99.99s, 999.9sd, 99min59s, 99h59min and wide time specifications.
  · A type which counts time elapsed or remaining time, and contact or non-contact connection types can be selected in accordance with requirements.
  · Power source freely selectable AC100 to 240V.
  · The DC specification enables a free choice from 12 to 48V.
  · UL and foreign standard CSA were acquired.

  • Mengenrabatt

  ab∗ ：	153.27 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Solid State Timer H3CA

  OMRON

  [Features]
  · AC/DC power sources OK/8 operational functions.
  · 0.1 seconds to 9990 hours implemented in one timer.
  · The time elapsed display window is big and easy to see.
  · Uses a free power source, supporting AC24 to 240V/DC12 to 240V.
  · Moreover, the polarity instruction for the DC specification is unnecessary.
  · Eight operation functions can be selected using the switch operation function switch.
  · Multiple time specification implemented from 0.1 seconds to 9990 hours by use of a combination of time setting switch and the time units switch.
  · All kinds of external signal input functions enabled.
  · Can be connected to all kinds of non-contact point apparatus.
  · UL, CSA standard acquired.
  · Compatible with EMC standards (EN61812-1).
  · Corresponds to the CE mark.

  • Mengenrabatt

  ab∗ ：	91.73 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Solid State Timer H3DK-F

  OMRON

  DIN22.5 mm wide standard timer series twin timer for use in a panel
  
  [Features]
  · AC/DC power sources OK (AC/DC24 to 240V).
  · DC12V powered type has been added every series.
  · UL, CSA, CCC acquired, EN61812-1 compatible.
  · Compatible with the CE mark.
  · Conforms with the EMC standard EN61812-1, so can be used in an industrial environment but also in residential, sales and light industry.
  · A terminal construction with secure screw fittings that prevents against hazardous contact (EN50274 compliant).

  • Mengenrabatt

  ab∗ ：	114.93 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Solid State Timer H3DK-H

  OMRON

  DIN22.5 mm-width standard timer series power OFF-delay timer
  
  [Features]
  · For DIN22.5 mm width control panels.
  · Standard timer series.
  · AC/DC free power source compatible (AC/DC24 to 240V).
  · DC12V powered type has been added every series.
  · UL, CSA, NK, LR, CCR acquired, EN61812-1 compatible.
  · Compatible with the CE mark.
  · Conforms with the EMC standard EN61812-1, so can be used in an industrial environment but also in residential, sales and light industry.
  · A terminal construction with secure screw fittings that prevents against hazardous contact (EN50274 compliant).

  • Mengenrabatt

  ab∗ ：	113.10 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Solid State Timer H3DK-M / -S

  OMRON

  DIN22.5 mm wide standard timer series twin timer for use in a panel
  
  [Features]
  · AC/DC power sources OK (AC/DC24 to 240V).
  · DC12V powered type has been added every series.
  · UL, CSA, CCC acquired, EN61812-1 compatible.
  · Compatible with the CE mark.
  · Conforms with the EMC standard EN61812-1, so can be used in an industrial environment but also in residential, sales and light industry.
  · A terminal construction with secure screw fittings that prevents against hazardous contact (EN50274 compliant).

  • Mengenrabatt

  ab∗ ：	74.90 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Solid State Timer H3DS

  OMRON

  DIN17.5 mm wide console incorporating a standard timer series
  
  [Features]
  · Huge reduction in inventory types by enabling AC/DC power sources (AC24 to 230V/DC24 to 48V).
  · The eight operational modes (type H3DS-ML), and four operational modes (Type H3DS-SL) cover a variety of applications.
  · Erroneous operation prevented by a dial/switch locking function.
  · 0 Setting instantaneous output which facilitates sequence check.
  · UL, CSA acquired, EN61812-1 compatible.
  · Compatible with the CE mark.
  · Conforms with the EMC standard EN61812-1, so can be used in an industrial environment but also in residential, sales and light industry.
  · Cadmium free terminal is easy on the environment (AgNi connection point) relay employed.
  · Name seals applied for use by specific preferred users.
  · A terminal construction with secure screw fittings that prevents against hazardous contact (VDE0106/P100 compliant).

  ab∗ ：	62.65 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Solid State Timer H3RN

  OMRON

  [Features]
  · Type G2R A small scale and thin timer which is relay and pin compatible.
  · Implements multiple time ranges and operational modes.
  · A small thin size which contributes to space saving.
  · UL, CSA standard acquired.
  · Meets the EN61812-1 standard.
  · Corresponds to the CE mark.

  • Mengenrabatt

  ab∗ ：	66.45 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Zeitschaltuhr mit Tagesprogramm, H5L

  OMRON

  [Features]
  · Weekly control using a large clock display.
  · A daily time switch of a setting type that can be set while in dialog with both sides, and with a large display with a clock.
  · Simple to operate with five keys.
  · ON/OFF time schedule setting has 24 steps.
  · AC100 to 230V free power source.
  · Has a warranty for long duration power outage (approx. 10 years).
  · International safety standard UL, CSA acquired.
  · Day-to-day operations are possible with the same settings as timer operation.

  • Mengenrabatt

  ab∗ ：	212.50 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Digitaler Timer mit Tagesprogramm H5F

  OMRON

  [Features]
  · Simplifies operation of one day schedule control.
  · Can select operation weekday (however, only one each of operational weekday and special weekday can be set).
  · ON/OFF time schedule setting has 24 steps.
  · Compatible with the CE mark.
  · UL, CSA standard acquired.
  · Remarkably simple handling of bank holidays with holiday function.
  · Simplified checking of the program with the test mode function.
  · Can deal with urgent schedule changes with the semiautomatic operation.
  · Pulse operation enabled as well as Summer time response.
  · All functions subject to finger protection.
  · A line-up of convention dimension types which are surface or deep mounted.
  · Day-to-day operations are possible with the same settings as timer operation.

  ab∗ ：	262.10 €
  Minimum Lieferzeit ：	7 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Solid State Timer, H3DK-G

  OMRON

  Solid state timer H3DK-G
  
  [Features]
  · DIN22.5 mm width standard timer series for use in the control panel.
  · AC/DC free power source compatible (AC/DC24 to 240V).
  · DC12V powered type has been added every series.
  · UL, CSA, CCC acquired, EN61812-1 compatible. Compatible with the CE mark.
  · Conforms with the EMC standard EN61812-1, so can be used in an industrial environment but also in residential, sales and light industry.
  · A terminal construction with secure screw fittings that prevents against hazardous contact (EN50274 compliant).

  ab∗ ：	126.22 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Dip-Zeitmesser H3FA

  OMRON

  Dip timer H3FA
  
  [Features]
  · A timer for use on a PCB of contact / non-contact output type.
  · Two types are provided for control output, with the contact output (1a, 1b) it is 3A (AC250V low resistance load), with the non-contact output there is a maximum of 150mA and high capacity.
  · 1 sec./10 sec./1 min./10 min. (type A), 6 sec./60 sec./6 min./60 min. (type B) with four time types in one apparatus offering multiple functions.
  · The time can be operated remotely by the connection to an external varistor.
  · Completely washable.
  · A small scale size enabling installation in a one-inch-pitch rack (length × width × height: 17.75 × 36.9 × 19.5 mm).
  · UL/CSA acquired.

  • Mengenrabatt

  ab∗ ：	28.77 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...