SURUGA SEIKI Filterhalter

?* Informationen zur Lieferzeit und Preisen

• 

  Filterhalter mit Blattfeder

  SURUGA SEIKI

  [Features]
  · A holder for holding square and round filters.
  · Can be fitted with up to four filters with external diameters of ø50 mm.
  · Filters are fixed by inserting them from the top whereupon the leaf spring will push them against the reference surface.
  · As the tilt of the filter (even when replacing them) remains constant in relation to the optical axis, the optical axis will not shift dramatically.
  · The filters will not abut against each other.
  · The filter-contacting portion of the leaf spring is made of resin.

  2D / 3D CAD Daten verfügbar

  ab∗ ：	133.52 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Filterhalter (Y-Modell)

  SURUGA SEIKI

  [Features]
  · A holder for setting round and square type filters.
  · Can be fitted with up to four filters with external diameters of ø50 mm.
  · Filters are inserted from the top, but as they are only placed down, they can be angled depending on the filter thickness.

  2D / 3D CAD Daten verfügbar

  ab∗ ：	136.96 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Filterhalter (Blockform)

  SURUGA SEIKI

  [Features]
  · A holder for setting filters with diameters of ø15 mm or ø20 mm.
  · The optical axis height is standardized at 25 mm from the bottom.
  · Can be fitted with two filters.
  · Fix by loosening the clamp and sliding the holding part backwards or forwards in line with the thickness of the filter.
  · Filters with a thickness of up to 4 mm are supported.
  · The bottom plate features an M4 tapped hole. Mount a rod to change to a rod type.
  · The F561-20 can also be used as a simplified polarizing element holder by directly turning the element.

  2D / 3D CAD Daten verfügbar

  ab∗ ：	132.96 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...