TAKIGEN Klappenfeststeller

?* Informationen zur Lieferzeit und Preisen

• 

  Klammer mit Stopper für schwere Türen, B-450

  TAKIGEN

  The fixed angle of the door can be changed by changing the hinge position.
  
  [Features]
  · Left and right dual use type (this photo is for the right side. For left side use, set the mounting bracket in reverse before use. Secure the mounting bracket and rotate the nut).

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	28.08 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Scharnierstrebe für Deckel B-21

  TAKIGEN

  Stainless steel stop-stay with excellent corrosion resistance that can be stopped in two steps
  
  [Features]
  · Compact size doesn't take up much installation space.
  · For right and left side.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	6.80 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Große Edelstahl-Klammer für Türen B-1025

  TAKIGEN

  Large stay for doors that can be used on the left and right by attaching metal fittings
  
  [Features]
  · B-1025-2A is a different type of mounting bracket of B-1025-2.
  · B-1025-3A is a stainless steel type of B-25-3.
  · Mounting bracket is same as B-1025-2A.
  · Left-right dual use type (fig. shows the right one in use. For left use, set the mounting bracket in reverse and then use).

  • Mengenrabatt

  • Auf Lager

  2D / 3D CAD Daten verfügbar

  ab∗ ：	18.13 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Sicheres Edelstahl-Klammerschloss, B-1474

  TAKIGEN

  [Features]
  · Fully fixed type focused on safety.
  · Safety lock mechanism added to conventional stay B-1460.
  · Will not close unless the lock is released by pressing the button.
  · SUS316 type with salt tolerance specification.
  · For right and left side.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	53.64 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Edelstahlrutsche Brace für Deckel, B-1455

  TAKIGEN

  The stopper is activated by opening the lid. It can slide again by pulling the knob. Made of stainless steel, with excellent corrosion resistance.
  
  [Features]
  · When the lid is opened, it is fixed by the operation of the stopper.
  · Slide by pulling the stopper knob.
  · The lid can be fixed in 3 places.
  · Made of stainless steel, corrosion resistant.
  · Left and right combination

  2D / 3D CAD Daten verfügbar

  ab∗ ：	30.06 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Klammer für Deckel B-40

  TAKIGEN

  Compact and does not take up much space, so it can be used in any place.
  
  [Features]
  · Small and does not take up much installation space.
  · For right / for left (This diagram photo is for right).

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	4.86 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Anschlagbügel für Deckel B-60-B

  TAKIGEN

  Stainless steel stay which can be stopped at any position.
  
  [Features]
  · Existing product B-1060B-60 has changed to B-1060-BB-60-B with an improvement in stopper.
  · Stops at any position by operating the stop lever.
  · Left and right dual use type.
  · Made from corrosion resistant stainless steel (B-1060-B).

  2D / 3D CAD Daten verfügbar

  ab∗ ：	33.36 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl drehbare Klammer B-1453

  TAKIGEN

  Beginning with orders on June 1, 2013, we changed the display for what was conventional for right to left and the one for left to right (e.g. B-1453-1-L⇒B-1453-1-R). For more detailed information please contact your Takigen representative at 03-5805-7470. *The CAD data for this series is currently being revised. This data will be made available as soon as the modifications have been completed.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	12.84 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  2-Stufen-Klappenfeststeller für Türen aus Edelstahl B-1136-2

  TAKIGEN

  A corrosion-resistant 2-step door stay.
  
  [Features]
  · Can hold doors in position in 2 steps.
  · Can be inspected at the first step (approx. 80° to 90°) and can place or remove the built-in unit smoothly at the second step (approx. 120°).
  · Made of stainless steel for superior corrosion resistance.

  ab∗ ：	34.75 €
  Minimum Lieferzeit ：	13 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl-Klammer mit Stopper für schwere Türen, B-1450

  TAKIGEN

  The fixed angle of the door can be changed by changing the hinge position.
  
  [Features]
  · Left and right dual use type (this photo is for the right side. For left side use, set the mounting bracket in reverse before use. Secure the mounting bracket and rotate the nut).

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	42.43 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Edelstahl-Federklammer B-1491

  TAKIGEN

  Stop at the specified position using the operation of the spring. There is no worry of gas leakage, and the sliding part can also suppress the generation of metal powder by resin.
  
  [Features]
  · Stop at the specified position using the operation of the spring.
  · Since a spring is being used, there is no worry of gas leak.
  · There is no direction for installation.
  · Can also be used for reducing the weight of the lid.
  · Since the resin bush is used for the sliding part, it is possible to suppress the occurrence of metal powder due to abrasion.
  · Made of stainless steel, corrosion resistant.
  · Left and right dual use type.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	59.54 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  One-Touch-Strebe für Überdachungen B-580-1

  TAKIGEN

  When the lid is opened, it is fixed by the action of the stopper. Release easily by just lifting the lid a little
  
  [Features]
  · When the lid is opened, the lid is fixed by the operation of the stopper.
  · The stopper is released if the lid is lifted a little while closing.
  · For right and left side.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	16.93 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Multistop Edelstahl-Klammer für Überdachungen B-1570N

  TAKIGEN

  Automatic lock by spring. Door can be closed by releasing the stopper.
  
  [Features]
  · Made of stainless steel, with excellent corrosion resistance.
  · Stop at every 45° position.
  · For right or left (this diagram photo shows the right).

  2D / 3D CAD Daten verfügbar

  ab∗ ：	15.27 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  One-Touch-Edelstahl-Klammer B-1223

  TAKIGEN

  The stopper engages when the window is opened. It will be unlocked if lifted a little while closing. Made of stainless steel with excellent corrosion resistance.
  
  [Features]
  · Made of stainless steel, with excellent corrosion resistance.
  · When the door is opened, the door is fixed by the operation of the stopper.
  · The stopper is released if it is lifted a little while closing.
  · For right or left (this diagram photo shows the right).

  2D / 3D CAD Daten verfügbar

  ab∗ ：	22.69 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Schienenklammer B-476

  TAKIGEN

  If the door is pulled, it is firmly fixed at the stop position. Release is easy operated by just pulling the stopper.
  
  [Features]
  · Stops at the stop position without fail.

  2D / 3D CAD Daten verfügbar

  ab∗ ：	102.16 €
  Minimum Lieferzeit ：	14 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl dicke Klammer für sehr schwere Lasten, B-1456

  TAKIGEN

  Robust structure suitable for super heavy doors. Unlock with wire. Made of stainless steel with excellent corrosion resistance.
  
  [Features]
  · Robust structure suitable for super heavy doors.
  · Made of stainless steel, corrosion resistant.
  · Release lock with wire (B-1456-W).
  · For right / for left

  2D / 3D CAD Daten verfügbar

  ab∗ ：	486.24 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl-Klammer für Deckel, B-1040

  TAKIGEN

  Compact, so it doesn't take up much installation space. Left and right types are available.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	8.84 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Edelstahl-Klammer mit Auto-Stopper für Überdachungen, B-1020-B

  TAKIGEN

  [Features]
  · Use the sliding stopper mechanism to hold the door securely.
  · Automatically locks by spring, and when the stopper is released the door will close.
  · For right or left (this diagram photo shows the right).

  2D / 3D CAD Daten verfügbar

  ab∗ ：	21.77 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl-Klammer B-1475

  TAKIGEN

  Excellent corrosion-resistant stay made from stainless steel that can be used for both left and right
  
  [Features]
  · Made of stainless steel and has excellent corrosion resistance.
  · Left and right dual use type.

  • Mengenrabatt

  • Auf Lager

  2D / 3D CAD Daten verfügbar

  ab∗ ：	48.13 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Edelstahl-Stoppklammer B-1145

  TAKIGEN

  Fix door at 2 stages of angle, lock by just stepping down on the arm. Made of stainless steel with excellent corrosion resistance.
  
  [Features]
  · When opening the door, the pin will enter into the stopper hole with the movement of the spring to fix it securely.
  · When pushing the arm (PUSH part) down, the stopper is released and the door can be closed.
  · The opening angle can be changed by tightening the hexagon bolt of the L type angle.
  · Left and right dual use type.

  2D / 3D CAD Daten verfügbar

  ab∗ ：	81.89 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl-Federklammer B-1222

  TAKIGEN

  Stop at the specified position using the operation of the spring. Can by used for both left and right, at the location of your choice.
  
  [Features]
  · Stop at the specified position using the operation of the spring.
  · Left and right dual use type.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	35.67 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Edelstahl-Federanschlag Stopklammer B-1480-S

  TAKIGEN

  [Features]
  · When opening the door, the pin will fall into the stopper hole with the movement of the spring and be held securely.
  · When the arm is pushed down, the stopper is released.
  · The B-1480 (Page 868) lock mechanism was further secured.
  · Left and right dual use type.

  2D / 3D CAD Daten verfügbar

  ab∗ ：	44.23 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl-Federdraht Klammer B-1221

  TAKIGEN

  Since wire is contained in the core, it does not extend too much. Ideal for lightweight small hatch, etc. as a simple stay.
  
  [Features]
  · Made of stainless steel, with excellent corrosion resistance, heat resistance and low temperature resistance.
  · Simple stay ideal for fixing small hatch, etc.
  · Minimal compact design.

  2D / 3D CAD Daten verfügbar

  ab∗ ：	23.22 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl Tischklammer B-1847

  TAKIGEN

  When the table is raised it is held in place by the stopper, and it is possible to store it by pushing the stopper knob. Stainless steel with excellent erosion resistance.
  
  [Features]
  · Made of stainless steel, with excellent corrosion resistance.
  · Raise the table and hold it in place by the operation of the stopper.
  · Can be stored by pushing the stopper knob.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	14.46 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Edelstahl drehbare Klammer B-1472-1

  TAKIGEN

  A new type of stay designed to stop at 22.5° C and open and close the door as far as 90° C
  
  [Features]
  · Multi-level stay with strength adjustment function.
  · A new type of multi-level stay designed to stop at every 22.5° and open and close the door as far as 90° C, that also prevents the door's vibration.
  · For right and left side.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	17.55 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Edelstahlstoppklammer Fuß-Typ B-1482

  TAKIGEN

  [Features]
  · When you open the door the stopper locks and fixes the door in place.
  · To release the lock, step on the arm with your foot, and close the door.
  · Left and right dual use type.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	22.02 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahldraht-Klammer B-1212

  TAKIGEN

  Made of reliable stainless steel.
  
  [Features]
  · Made of stainless steel, with excellent corrosion resistance, heat resistance and low temperature resistance.
  · Simple stay ideal for fixing small hatch, etc.
  · Minimal compact design.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	4.68 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Einwegdrehmomentenstrebe B-492

  TAKIGEN

  Possible to stop at any position. Adjust holding power and closing speed with attached hexagonal wrench.
  
  [Features]
  · Doors can be stopped at any position.
  · During operation, torque is applied in one direction.
  · Holding force and opening / closing speed can be adjusted with the included hexagonal wrench.
  · For top opening doors, left and right dual use type.

  2D / 3D CAD Daten verfügbar

  ab∗ ：	28.48 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl-Klammer für schwere Türen, B-1451

  TAKIGEN

  Stay for left and right type heavyweight doors using a stop mechanism with a strong coil spring
  
  [Features]
  · Uses a stop mechanism with a strong coil spring.
  · Left and right dual use type (this photo diagram shows the right one set. For left use, set the mounting bracket in reverse and then use).

  2D / 3D CAD Daten verfügbar

  ab∗ ：	40.27 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl-Stopklammer für Deckel, B-1060-B

  TAKIGEN

  Possible to stop at any position by operating the stop lever. Made of stainless steel with excellent corrosion resistance.
  
  [Features]
  · Existing products B-1060/ B-60 have changed to B-1060-B/ B-60-B with improvements in stoppers.
  · Stops at any position by operating the stop lever.
  · Left and right dual use type.
  · Made of stainless steel, corrosion resistant

  2D / 3D CAD Daten verfügbar

  ab∗ ：	39.88 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  One-Touch-Strebe für Überdachungen B-580-3

  TAKIGEN

  When the lid is opened, it is fixed by the action of the stopper. Release easily by just lifting the lid a little
  
  [Features]
  · When the lid is opened, the lid is fixed by the operation of the stopper.
  · The stopper is released if the lid is lifted a little while closing.
  · For right and left side.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	16.05 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Große Edelstahl-Klammer für Türen B-1025-A

  TAKIGEN

  Large stay for doors that can be used on the left and right by attaching metal fittings
  
  [Features]
  · B-1025-2A is a different type of mounting bracket of B-1025-2.
  · B-1025-3A is a stainless steel type of B-25-3.
  · Mounting bracket is same as B-1025-2A.
  · Left-right dual use type (fig. shows the right one in use.
  · For left use, set the mounting bracket in reverse and then use).
  · B-1025-2Ahasadifferent

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	19.88 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Rostfreier Edelstahl 90°-Stopper B-1891

  TAKIGEN

  Auto locking, 90° C stopper that opens with one touch. Made of stainless steel, with high corrosion resistance.

  2D CAD Daten verfügbar

  ab∗ ：	111.85 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Rostfreier Edelstahl 90°-Stopper B-1893

  TAKIGEN

  Automatically locks at 90° C when opening the door. Ideal for light vehicles.
  
  [Features]
  · Automatically locks at 90° when opening the door.
  · Locking does not work in the closing direction.
  · When opening more than 90°, please open the door while pressing the lock part.
  · Ideal for light vehicles.
  · Left and right combination

  2D / 3D CAD Daten verfügbar

  ab∗ ：	87.68 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  90°-Anschlag B-893

  TAKIGEN

  [Features]
  · Automatically locks at 90° when opening the door.
  · Locking does not work in the closing direction.
  · When opening more than 90°, please open the door while pressing the lock part.
  · Ideal for light vehicles.
  · Left and right dual use type.

  2D / 3D CAD Daten verfügbar

  ab∗ ：	37.71 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Klammer mit automatischem Stopper für Überdachung, B-20-B

  TAKIGEN

  Hold the door securely with a sliding stopper
  
  [Features]
  · Door is held securely with a sliding stopper mechanism.
  · Automatically locks by spring, and when the stopper is released the door will close.
  · For right or left (this diagram photo shows the right).

  2D / 3D CAD Daten verfügbar

  ab∗ ：	15.98 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Klammer mit Stopper B-430

  TAKIGEN

  Right and left dual use stay with stopper.
  
  [Features]
  · Mounting compatibility with B-450-2 (B-430-2), B-450-3 (B-430-3).
  · Right and left dual use type (for left use, please change the mounting position of the stopper before use).

  2D / 3D CAD Daten verfügbar

  ab∗ ：	17.43 €
  Minimum Lieferzeit ：	10 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl-Stoppklammer B-1480

  TAKIGEN

  [Features]
  · When the door is opened, the pin falls into the stopper hole due to the weight of the arm and holds it perfectly in place.
  · When the arm is lifted, the stopper is released.
  · Left and right dual use type.

  2D / 3D CAD Daten verfügbar

  ab∗ ：	39.88 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl Tischklammer B-1485

  TAKIGEN

  [Features]
  · Made of stainless steel, with excellent corrosion resistance.
  · When the table is raised, it is held in place by the stopper.
  · Slide by pulling the stopper knob.
  · Stretch type with little danger of pinching your hands.

  2D / 3D CAD Daten verfügbar

  ab∗ ：	48.57 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl Deadlock Klammer B-1467

  TAKIGEN

  Made of stainless steel which is resistant to vibration and shock and has excellent corrosion resistance. When opened it is fully fixed, and it closes when the stopper is pushed.
  
  [Features]
  · Safe structure resistant to vibration shock.
  · Made of stainless steel, corrosion resistant.
  · When opened it is fully fixed, and it closes when the stopper is pushed.
  · For right or left (this diagram photo shows the right).

  2D / 3D CAD Daten verfügbar

  ab∗ ：	40.27 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Stainless Steel Spangenklamme B-1468

  TAKIGEN

  Stainless steel with excellent corrosion resistance, vibration and shock resistant safety structure
  
  [Features]
  · Safety structure resistant to vibration shock.
  · Made of stainless steel, corrosion resistant.
  · There are 3 types with the same total length (L₂) and different stop positions (1 to 6).
  · Left and right dual use type.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	37.11 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Anschlagstütze: Fußmodell B-482

  TAKIGEN

  [Features]
  · When you open the door the stopper locks and fixes the door in place.
  · To release the lock, step on the arm with your foot, and close the door.
  · Left and right dual use type.

  • Mengenrabatt

  2D / 3D CAD Daten verfügbar

  ab∗ ：	13.61 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Edelstahl Freier Anschlagbügel B-1571

  TAKIGEN

  Ratchet mechanism type with safety stopper is a safe design which holds the door in position even if it is released while moving.
  
  [Features]
  · Even if you release your hand while opening the canopy, it retains its position by the operation of the ratchet mechanism type safety stopper (PAT.PEND.).

  2D / 3D CAD Daten verfügbar

  ab∗ ：	84.15 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Edelstahl Freie One-Touch-Klammer B-1479

  TAKIGEN

  [Features]
  · Made of stainless steel, with excellent corrosion resistance.
  · When the lid is opened, it is fixed at any position by the operation of the stopper.
  · When closing, please extend the stay to full to release the stopper.
  · Thin type that doesn't take up space.
  · Left and right dual use type.

  2D / 3D CAD Daten verfügbar

  ab∗ ：	36.26 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Edelstahl-Verschluss Öffnerklammer B-1469

  TAKIGEN

  Locks with one touch. To unlock, just pull the knob. Made from stainless steel for superior corrosion resistance.
  
  [Features]
  · Made of stainless steel, with excellent corrosion resistance.
  · Locking is complete with one touch, and unlocking can be done just by pulling the knob.

  2D / 3D CAD Daten verfügbar

  ab∗ ：	61.61 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...