TRUSCO NAKAYAMA Bearbeitungs-/Abnehmwerkzeuge
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
Sechseckige Neu-Gewinde-Matrize (metrisch-grobe Schraube) , Satz【10 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· Used when cleaning out bolts/screws.
· Work can be done using a monkey wrench.
· This product can be used in place of a round die when modifying the screw thread ridges.
· Convenient for storage as it is a set of main sizes.
· Used when cleaning out bolts/screws.
[Applications]
· Metric coarse thread alteration.
[Material]
· Low Alloy Steel (SKS)ab∗ ： 461.87 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
Geklapptes Werkzeug zum Abnehmen von Gewinden, 4 Greifer (für 4 Rillen) , Wechselgreifer【4 Stk. pro Packung】
TRUSCO NAKAYAMA
A tool that extracts broken taps when broken partway through threading without damaging the screw threads. The claw uses a special steel wire with high torsion strength that is not easily broken, so it can be used to easily remove broken taps which have caught strongly. Even if the claw is broken, it can be used repeatedly until it becomes too short. Also, since it can be simply exchanged with a replacement jaw, it is extremely economical. Dedicated for hand tapping.- Mengenrabatt
ab∗ ： 17.38 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Abziehvorrichtung für defekte Gewinde, Satz【5-7 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· A tool that extracts broken taps when broken partway through threading without damaging the screw threads.
· The claw uses a special steel wire with high torsion strength that is not easily broken, so it can be used to easily remove broken taps which have caught strongly.
· Even if the claw is broken, it can be used repeatedly until it becomes too short. Also, since it can be simply exchanged with a replacement jaw, it is extremely economical.
· Dedicated for hand tapping.
[Applications]
· For extracting broken hand taps.ab∗ ： 158.24 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
„Abziehvorrichtung“ (Spiralmodell)
TRUSCO NAKAYAMA
[Features]
· Used for removing damaged bolts, pipes, etc.
· Bolts that are broken inside screw holes can be extracted without damaging the screw holes.
· When Phillips or slotted grooves in the heads of machine screws are damaged, it is typically very difficult to extract the screws, but they can be removed easily with this tool.
· Hex bolts with crushed head or broken bolts can be removed easily by drilling a pilot hole.
[Applications]
· For the extraction of things like bolts and pipes that had broken inside.- Mengenrabatt
ab∗ ： 4.25 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
„Abziehvorrichtung, Satz“ (Spiralmodell) 【6 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· Bolts that are broken inside screw holes can be extracted without damaging the screw holes.
[Applications]
· For the extraction of things like bolts and pipes that had broken inside.- Mengenrabatt
ab∗ ： 54.09 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Extraktor (quadratisch), EX-809K
TRUSCO NAKAYAMA
[Features]
· Used for removing damaged bolts, pipes, etc.
· The square model can be used for both left and right hand bolt screws.
· It is applicable to both left and right bolt screws.
[Applications]
· When the cross hole or slit in the head of a machine screw is damaged.
· For removal of hex bolts with crushed heads or broken bolts.
· For the extraction of things like bolts and pipes that had broken inside.ab∗ ： 6.44 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Auszieher-Set (quadratisch), EXS-18【5-7 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· Bolts that are broken inside screw holes can be extracted without damaging the screw holes.
[Applications]
· For the extraction of things like bolts and pipes that had broken inside.ab∗ ： 42.06 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
| |
| Warenzeichen | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA |
| Artikelserie | Sechseckige Neu-Gewinde-Matrize (metrisch-grobe Schraube) , Satz【10 Stk. pro Packung】 | Abziehvorrichtung für defekte Gewinde, Satz【5-7 Stk. pro Packung】 | „Abziehvorrichtung, Satz“ (Spiralmodell) 【6 Stk. pro Packung】 | ||||
| ab∗ | 461.87 € *Stückpreis Standardkonfiguration | 17.38 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis | 158.24 € *Stückpreis Standardkonfiguration | 4.25 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis | 54.09 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.44 € *Stückpreis Standardkonfiguration | 42.06 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit ： | 6 Arbeitstage | Versand am selben Tag | 6 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 6 Arbeitstage | 6 Arbeitstage |
| Screw Types | - | - | - | - | - | - | - |
| Screw size (Nominal) | - | - | - | - | - | - | - |
| Pitch (P), Number of Threading(mm) | - | - | - | - | - | - | - |
| Chamfer threads (Lcf) | - | - | - | - | - | - | - |
| Tool Material Type | - | - | - | - | - | - | - |
| Tap Type | Matrize | Umbau-/Abnehmwerkzeug | Umbau-/Abnehmwerkzeug | Umbau-/Abnehmwerkzeug | Umbau-/Abnehmwerkzeug | Umbau-/Abnehmwerkzeug | Umbau-/Abnehmwerkzeug |
| Hole type | - | - | - | - | - | - | - |
| Coating Y/N | - | - | - | - | - | - | - |
| Coating Type | - | - | - | - | - | - | - |
| Overall Length (L)(mm) | - | - | - | 50 ～ 76 | - | 60 | - |
Loading...
Filtern nach:
Stock
-
- Stock Items Included
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Screw Types
- Meter
-
Screw size (Nominal)
-
Pitch (P), Number of Threading(mm)
-
Chamfer threads (Lcf)
-
Tool Material Type
- Carbid
- Vanadium HSS-Stahl
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Suchergebnisse durch Herstellerauswahl einschränken
-
- REX TOOLS (20)
- GEDORE (7)
- TRUSCO NAKAYAMA (7)
- WERA (5)
- HAZET (4)
- NOGAJAPAN (4)
- RENNSTEIG (3)
- BAHCO (2)
- EIKOSHA (2)
- WIHA (2)
- BERNSTEIN AG (1)
- H & H (1)
- LIGHTSEIKI (1)
- OSG (1)
- STAHLWILLE (1)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Bearbeitungs-/Abnehmwerkzeuge
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.