TRUSCO NAKAYAMA Werkzeuge
Suche durch Präzisierung der Kategorie der unteren Klasse
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
Magnetische Düse (zur Aufnahme von Schneidflüssigkeit)
TRUSCO NAKAYAMA
[Features]
· The powerful 800 N magnet makes it easy to install in any position.
· The angle and direction of the nozzle are freely adjustable.
· The additional Rc1/4 screw holes allow two nozzles to be used.
· Two independent screw holes are available.
[Applications]
· For cutting fluid lubrication.ab∗ ： 120.93 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Magnetisches Kühlmittel
TRUSCO NAKAYAMA
[Features]
· Powerful magnet enables easy coolant piping.
· The flexible fluid nozzle can be used in either liquid or gas.
· Flow rate can be adjusted by rotating the nozzle tip. (0 to stepless)
[Applications]
· For cooling, drying, and cleaning in metal processing.ab∗ ： 260.63 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Drehtisch Flanschbolzen- und Mutter-Set
TRUSCO NAKAYAMA
For scroll chucks compatible with front mounting.ab∗ ： 45.13 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Drehtisch (vertikaler Einsatz)
TRUSCO NAKAYAMA
[Features]
· : It is ideal for table mounting, arc cutting, boring counterbore, etc., and can also be used vertically.
·The table rotates 4 degrees for each rotation of the handle.
[Applications]
· For an accurate angle calculation.ab∗ ： 809.11 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Buchse Bohrmaschine
TRUSCO NAKAYAMA
[Features]
· Used to change Jacobs taper JT6 (2 1/2) of drill press to Morse taper (MT).
[Applications]
· Used to change Jacobs taper JT6 (2 1/2) of drill press to Morse taper (MT).ab∗ ： 156.71 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Magnetisches Kühlmittel
TRUSCO NAKAYAMA
[Features]
· Powerful magnet enables easy coolant piping.
[Applications]
· For the piping of coolant nozzles.ab∗ ： 105.41 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Schalldämpfer für Air Jet / Luftdüse
TRUSCO NAKAYAMA
[Features]
· Reduction in ventilation rate is exceedingly low thanks to low resistance.
· This product is made of a flame-retardant material.ab∗ ： 11.61 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
„Kühlmittelbuchse“ (Rückschlagventil)
TRUSCO NAKAYAMA
[Features]
· Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.
[Applications]
· Used to prevent reverse current.ab∗ ： 20.76 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
„Kühlmittelbuchse“ (Ringumlaufdüsen-Kit)
TRUSCO NAKAYAMA
[Features]
· Supplies coolant from 15 nozzles toward the center of the circle.
· Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.ab∗ ： 106.83 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
„Kühlmittelbuchse“ (flache Düse) 【1-10 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.ab∗ ： 7.45 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
„Kühlmittelbuchse“ (Ventil) 【1-10 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.ab∗ ： 18.16 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Drehtisch, Schraube Ausführung T
TRUSCO NAKAYAMA
[Merkmale]
T-förmige Schraube zur Einstellung der Position der Referenzskala.
-Gewicht (g): 150ab∗ ： 33.01 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Drehtisch (zentrale Kalibrierwelle)
TRUSCO NAKAYAMA
[Features]
· Centering and installation of flange and scroll chucks can be performed easily and accurately as a center correcting shaft is used.ab∗ ： 66.85 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Line Master (starrer Härtetyp), L32-130
TRUSCO NAKAYAMA
[Features]
· It allows easy scribing.
· Milling chuck and side lock holder can be used to easily attach it to various machines.
· Since it uses a spring to move in the axial direction, it can also scribe on a tapered surface.
[Applications]
· Can be attached to milling chucks, etc., for scribing.ab∗ ： 184.19 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Line Master (starrer Härtetyp), L32-130K
TRUSCO NAKAYAMA
It allows easy scribing. Easily attached to any machineab∗ ： 57.24 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Line Master (Typ mit Hartmetallspitze), S32-130
TRUSCO NAKAYAMA
[Features]
· It allows easy scribing.
· Milling chuck and side lock holder can be used to easily attach it to various machines.
· Since it uses a spring to move in the axial direction, it can also scribe on a tapered surface.
· The scribe part can be fixed by the lever.
· A carbide chip is used at the scribe part.
[Applications]
· Can be attached to milling chucks, etc., for scribing.ab∗ ： 293.23 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Line Master (Typ mit Hartmetallspitze), S32-130K
TRUSCO NAKAYAMA
It allows easy scribing. A carbide tip is used for the scribe tipab∗ ： 141.66 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
Zentrierplatte „SUKEITA“【15 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· Can be used with great convenience for the centering of all lathes, planing boards, milling machines, shaper presses, and drilling machines when placed underneath various cutting bits, jigs, and other items.
· It can also be used for thickness adjustment.
[Applications]
· For centering work.ab∗ ： 22.79 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
![Bohrsockel [für Morsekegel]](//de.misumi-ec.com/linked/material/fs/TRC1/PHOTO/t010002765230.jpg?$product_view_b$)
Bohrsockel [für Morsekegel]
TRUSCO NAKAYAMA
[Features]
· Use to change or extend the size of Morse tapers.ab∗ ： 106.49 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Revolverhülse
TRUSCO NAKAYAMA
[Features]
· Straight shafts are changed to Morse tapered shafts in the milling machine and machining center.
[Applications]
· Straight shafts are changed to Morse tapered shafts in the milling machine and machining center.ab∗ ： 125.76 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Austreiber
TRUSCO NAKAYAMA
[Features]
· Used for taking out drills from drill sleeves or drill sockets.ab∗ ： 10.80 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
![Bohrhülse [für Morsekegel]](//de.misumi-ec.com/linked/material/fs/TRC1/PHOTO/t010002765232.jpg?$product_view_b$)
Bohrhülse [für Morsekegel]
TRUSCO NAKAYAMA
[Features]
· Use when making the drill or reamer Morse taper size smaller. (Such as when aligning to the spindle taper size of the drilling machine being used)ab∗ ： 55.35 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Aufnahmedorn
TRUSCO NAKAYAMA
[Features]
· Used on drill presses and lathes by attaching drill chucks, etc. on arbors as with sleeves and sockets.ab∗ ： 37.60 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Schlüsselloses Spannfutter
TRUSCO NAKAYAMA
[Features]
· The chuck handle is not required, and it is possible to attach and detach the drill with manual rotation alone.
· It is an internal design that naturally increases the gripping force when centrifugal force is generated in the spindle rotation direction.
· Mainly installed onto boring machines for attaching drills.ab∗ ： 151.52 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Schlüsselloses Spannfutter (MT-Schaft integriert)
TRUSCO NAKAYAMA
[Features]
· Keyless chuck and integrated MT shank reduce the hassle of mounting.
· The chuck handle is not required, and it is possible to attach and detach the drill with manual rotation alone.
· It is an internal design that naturally increases the gripping force when centrifugal force is generated in the spindle rotation direction.
· Chuck arbor is quenched and polished.
[Applications]
· Mainly used mounted on lathes to mount a drill.ab∗ ： 162.36 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Schlüsselloses Spannfutter (MT-Schaft integriert)
TRUSCO NAKAYAMA
[Features]
· A hook wrench for keyless chucks.
· For TKL1320, TKL1330, and TKL1340.ab∗ ： 10.94 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Magnetsockel-Kühlmittel
TRUSCO NAKAYAMA
[Features]
· With its powerful 600 N magnet, the coolant piping is very useful for metalworking sites.
[Applications]
· For the piping of coolant nozzles.ab∗ ： 117.40 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Magnetsockel-Kühlmittel
TRUSCO NAKAYAMA
[Features]
· With its powerful 600 N magnet, the coolant piping is very useful for metalworking sites.
· The flexible fluid nozzle can be used in either liquid or gas.
· Flow rate can be adjusted by rotating the nozzle tip. (0 to stepless)
[Applications]
· For cooling, drying, and cleaning in metal processing.ab∗ ： 192.11 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Flexible Öldüse
TRUSCO NAKAYAMA
[Features]
· The special processing extends the life of the blade tip and clearly finishes worked surfaces.
· The tip of the nozzle does not tilt forward compared to a plastic one.
[Applications]
· For cutting, cooling, and lubrication nozzles.
· It is attached to the machine tool body and used for lubrication and cooling.ab∗ ： 61.67 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Endkappe für Magnetsockel
TRUSCO NAKAYAMA
[Features]
· Can be used to plug unnecessary holes in the magnet base coolant.
[Applications]
· 2-axis/3-axis - Bracket for stopping up unnecessary holes.ab∗ ： 3.56 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Düse für magnetisches Kühlmittel
TRUSCO NAKAYAMA
[Features]
· Replacement nozzle for magnetic coolant and magnet-based coolant.
· Round blow (R type) with flow adjustment nozzle (from 0, stepless).
[Applications]
· For blowing cutting chips in cutting work.ab∗ ： 61.67 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Air Jet (1 Düsensatz)
TRUSCO NAKAYAMA
[Features]
· It is a cooling method that does not use cutting fluid.
· Cooling air temperature can be lowered up to 31°C below outside temperature.
· Since no machine is used, there is no breakdown and maintenance is easy.
· A cooling device for dry processing applying 'Vortex Theory'.
[Applications]
· For cooling the blade and workpiece during cutting process.ab∗ ： 180.08 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Ölspritze
TRUSCO NAKAYAMA
[Features]
· This product is capable of washing chip powder and the like generated by machine tools such as CNC/CMC by feeding cutting oil of the machine from the circulating pump to the oil gun.
[Applications]
· Cleaning the inside of machine tools.ab∗ ： 77.25 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
„Air Jet“ (Kühlsystem-Hauptgerät)
TRUSCO NAKAYAMA
[Features]
· Cooling air temperature can be lowered up to 31°C below outside temperature.
· Since it is air-cooling, cutting fluid is not required.ab∗ ： 105.89 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Magnet für Air Jet / Luftdüse
TRUSCO NAKAYAMA
[Features]
· An ultra-strong ON/OFF small magnet of 320 N.
· The bottom surface has V-shape processing (150°) and can adhere to not only flat surfaces but also cylindrical surfaces.
· Equipped with three screw holes Rc1/4. Can also be used for cutting fluids.
· Allows easy setting.
· Grinding finished surface adsorption force is S20C and plate thickness is 200 mm.
[Applications]
· For cutting fluid lubrication.
· Manifold with strong small magnet, for 1/4" nozzles.ab∗ ： 77.87 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Ersatzdüse für Air Jet / Luftdüse
TRUSCO NAKAYAMA
[Features]
· Has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance.ab∗ ： 40.29 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
„Kühlmittelbuchse“ (Schlauch) 【1-10 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.ab∗ ： 18.07 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
„Gelenkzange“ (für Kühlmittelbuchse)
TRUSCO NAKAYAMA
[Features]
· Material adopts die-cast aluminum and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.
[Applications]
· Coolant liner connection.ab∗ ： 128.87 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
„Kühlmittelbuchse“ (Schlauch)
TRUSCO NAKAYAMA
[Features]
· Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.ab∗ ： 110.00 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
„Kühlmittelbuchse“ (Schlauch-Kit) 【5-7 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.ab∗ ： 35.87 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
„Kühlmittelbuchse“ (2-tlg. Set) 【2 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.ab∗ ： 26.21 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
„Kühlmittelbuchse“ (gerollter Schlauch)
TRUSCO NAKAYAMA
[Features]
· Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.ab∗ ： 841.42 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
„Kühlmittelbuchse“ (90°-Düse) 【1-10 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.ab∗ ： 6.83 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
„Kühlmittelbuchse“ (runde Düse) 【1-10 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.- Mengenrabatt
ab∗ ： 5.66 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
„Kühlmittelbuchse“ (Flamme) 【1-10 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· Material adopts polyacetal resin and has excellent mechanical strength, fatigue resistance, dimensional stability, oil resistance, and chemical resistance. In addition, its characteristics include a wide usage temperature range of -30°C to +80°C.ab∗ ： 8.84 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
![Bohrsockel [für Morsekegel]](http://de.misumi-ec.com/linked/material/fs/TRC1/PHOTO/t010002765230.jpg?$product_view_b$)
![Bohrhülse [für Morsekegel]](http://de.misumi-ec.com/linked/material/fs/TRC1/PHOTO/t010002765232.jpg?$product_view_b$)
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Product Category |
| Applicable Manufacturing Machinery (main unit) |
| Spindle types |
| HSK type |
| Tool Type |
| Retainable blade diameter(mm) |
| Chuck Type |
| Holder Length L(mm) |
| Maximum Allowable Rotational Speed(min-1) |
| Coolant System |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA |
| Artikelserie | |||||||||||||||||||||||||||||||||||||||||||||
| ab∗ | 120.93 € *Stückpreis Standardkonfiguration | 260.63 € *Stückpreis Standardkonfiguration | 45.13 € *Stückpreis Standardkonfiguration | 809.11 € *Stückpreis Standardkonfiguration | 156.71 € *Stückpreis Standardkonfiguration | 105.41 € *Stückpreis Standardkonfiguration | 11.61 € *Stückpreis Standardkonfiguration | 20.76 € *Stückpreis Standardkonfiguration | 106.83 € *Stückpreis Standardkonfiguration | 7.45 € *Stückpreis Standardkonfiguration | 18.16 € *Stückpreis Standardkonfiguration | 33.01 € *Stückpreis Standardkonfiguration | 66.85 € *Stückpreis Standardkonfiguration | 184.19 € *Stückpreis Standardkonfiguration | 57.24 € *Stückpreis Standardkonfiguration | 293.23 € *Stückpreis Standardkonfiguration | 141.66 € *Stückpreis Standardkonfiguration | 22.79 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis | 106.49 € *Stückpreis Standardkonfiguration | 125.76 € *Stückpreis Standardkonfiguration | 10.80 € *Stückpreis Standardkonfiguration | 55.35 € *Stückpreis Standardkonfiguration | 37.60 € *Stückpreis Standardkonfiguration | 151.52 € *Stückpreis Standardkonfiguration | 162.36 € *Stückpreis Standardkonfiguration | 10.94 € *Stückpreis Standardkonfiguration | 117.40 € *Stückpreis Standardkonfiguration | 192.11 € *Stückpreis Standardkonfiguration | 61.67 € *Stückpreis Standardkonfiguration | 3.56 € *Stückpreis Standardkonfiguration | 61.67 € *Stückpreis Standardkonfiguration | 180.08 € *Stückpreis Standardkonfiguration | 77.25 € *Stückpreis Standardkonfiguration | 105.89 € *Stückpreis Standardkonfiguration | 77.87 € *Stückpreis Standardkonfiguration | 40.29 € *Stückpreis Standardkonfiguration | 18.07 € *Stückpreis Standardkonfiguration | 128.87 € *Stückpreis Standardkonfiguration | 110.00 € *Stückpreis Standardkonfiguration | 35.87 € *Stückpreis Standardkonfiguration | 26.21 € *Stückpreis Standardkonfiguration | 841.42 € *Stückpreis Standardkonfiguration | 6.83 € *Stückpreis Standardkonfiguration | 5.66 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 8.84 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit ： | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 7 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | Versand am selben Tag | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 9 Arbeitstage | 6 Arbeitstage | 9 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 9 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 7 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | Versand am selben Tag | 6 Arbeitstage |
| Product Category | Heiz- und Kühlgeräte | Heiz- und Kühlgeräte | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Heiz- und Kühlgeräte | Heiz- und Kühlgeräte | Heiz- und Kühlgeräte | Heiz- und Kühlgeräte | Heiz- und Kühlgeräte | Heiz- und Kühlgeräte | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Heiz- und Kühlgeräte | Heiz- und Kühlgeräte | Heiz- und Kühlgeräte | Heiz- und Kühlgeräte | Heiz- und Kühlgeräte | Heiz- und Kühlgeräte | Heiz- und Kühlgeräte | Heiz- und Kühlgeräte | Heiz- und Kühlgeräte | Heiz- und Kühlgeräte | Heiz- und Kühlgeräte | Heiz- und Kühlgeräte | Heiz- und Kühlgeräte | Heiz- und Kühlgeräte | Heiz- und Kühlgeräte | Heiz- und Kühlgeräte | Heiz- und Kühlgeräte | Heiz- und Kühlgeräte | Heiz- und Kühlgeräte |
| Applicable Manufacturing Machinery (main unit) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Spindle types | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| HSK type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tool Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Bohrung | Bohrung / Senker | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Retainable blade diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Chuck Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Holder Length L(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Allowable Rotational Speed(min-1) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Coolant System | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![Bohrsockel [für Morsekegel]](http://de.misumi-ec.com/linked/material/fs/TRC1/PHOTO/t010002765230.jpg?$product_view_c$)
![Bohrhülse [für Morsekegel]](http://de.misumi-ec.com/linked/material/fs/TRC1/PHOTO/t010002765232.jpg?$product_view_c$)
Loading...
Filtern nach:
Stock
-
- Stock Items Included
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Product Category
- Grundkörper
- Anschlüsse/Zubehör
- Heiz- und Kühlgeräte
- Messgeräte
-
Applicable Manufacturing Machinery (main unit)
- Bearbeitungszentren
- Allgemeine Maschine
- NC-Drehmaschine
-
Spindle types
- BT30
- BT40
- BT50
- HSK-A
- HSK-E
-
HSK type
-
Tool Type
-
Retainable blade diameter(mm)
- 0.25～0.50
- 0.25～ 6
- 0.3~3
- 0.3～8
- 0.45 ～0.55
- 0.45～3.25
- 0.45～4.05
- 0.45～6.05
- 0.50 to 0.75
- 0.5 to 0.75
- 0.5～5.0
- 0.5～ 6
- 0.5～6.5
- 0.5～7.0
- 0.5 ～ 8
- 0.5～8
- 0.5～ 8
- 0.5–10
- 0.5～10.0
- 0.5～13
- 0.5～13.0
- 0.5～16.0
- 0.55 ～0.65
- 0.65 ～0.75
- 0.7～6.0
- 0.7～6
- 0.75 ～0.85
- 0.75～1.0
- 0.75～1.00
- 0.85 ～0.95
- 0.95 ～1.05
- 1
- 1.0～0.5
- 1.0~1.25
- 1.00～1.25
- 1.0~6.0
- 1.0～8.0
- 1 to 13
- 1.05 ～1.15
- 1.15 ～1.25
- 1.25 ～1.35
- 1.25～1.5
- 1.25～1.50
- 1.35 ～1.45
- 1.4 to 1.5
- 1.45 ～1.55
- 1.5
- 1.5～1.0
- 1.50～1.75
- 1.5～1.75
- 1.5 to 10
- 1.5 ～10
- 1.5～20.0
- 1.55 ～1.65
- 1.65 ～1.75
- 1.75 ～1.85
- 1.75～2.0
- 1.75～2.00
- 1.75～10.0
- 1.75～10
- 1.85 ～1.95
- 1.95 ～2.05
- 2
- 2.0～1.5
- 2.00～2.25
- 2.0～2.25
- 2–8
- 2.0～10.0
- 2.05 ～2.15
- 2.15 ～2.25
- 2.25 ～2.35
- 2.25～2.5
- 2.25～2.50
- 2.35 ～2.45
- 2.4～2.5
- 2.45 ～2.55
- 2.5
- 2.5 to 2.0
- 2.50～2.75
- 2.5～2.75
- 2.5–3.0
- 2.5 ～13
- 2.5～13
- 2.5 to 16
- 2.5 ～16
- 2.5～16.0
- 2.5 ～20
- 2.5～20.0
- 2.5～20
- 2.55 ～2.65
- 2.65 ～2.75
- 2.675～3.175
- 2.75 ～2.85
- 2.75～3.0
- 2.75～3.00
- 2.75～3.25
- 2.75～13.0
- 2.75～16.0
- 2.75～16
- 2.85 ～2.95
- 2.9～3.0
- 2.925～3.175
- 2.95 ～3.05
- 2.95～3.05
- 2.95～8.05
- 3
- 3.0～2.5
- 3.00～3.25
- 3~3.5
- 3.0–3.5
- 3–4
- 3–6
- 3.0–6.0
- 3～ 6
- 3～ 8
- 3–10
- 3.0～10.0
- 3 to 12
- 3.0～12.5
- 3.0～13.0
- 3 to 16
- 3.0～16.0
- 3.0~20.0
- 3.05 ～3.15
- 3.05～3.15
- 3.125～3.225
- 3.15 ～3.25
- 3.15～3.25
- 3.175
- 3.25 ～3.35
- 3.25～3.35
- 3.25～3.50
- 3.25～3.75
- 3.35 ～3.45
- 3.35～3.45
- 3.4~3.5
- 3.40～3.50
- 3.45 ～3.55
- 3.45～3.55
- 3.5
- 3.5～3.0
- 3.50～3.75
- 3.5～4.0
- 3.5～20.0
- 3.55 ～3.65
- 3.55～3.65
- 3.65 ～3.75
- 3.65～3.75
- 3.75 ～3.85
- 3.75～3.85
- 3.75～4.00
- 3.75～4.25
- 3.75～ 4.25
- 3.85 ～3.95
- 3.85～3.95
- 3.9～4.0
- 3.90～4.00
- 3.95 ～4.05
- 3.95～4.05
- 4
- 4.0～3.5
- 4.00～4.25
- 4~4.5
- 4.0–4.5
- 4–5
- 4 to 12
- 4.0~20.0
- 4–20
- 4.05 ～4.15
- 4.05～4.15
- 4.15 ～4.25
- 4.15～4.25
- 4.25 ～4.35
- 4.25～4.35
- 4.25～4.50
- 4.25～4.75
- 4.25～ 4.75
- 4.35 ～4.45
- 4.35～4.45
- 4.4～4.5
- 4.40～4.50
- 4.45 ～4.55
- 4.45～4.55
- 4.5～4.0
- 4.50～4.75
- 4.5–5.0
- 4.55 ～4.65
- 4.55～4.65
- 4.65 ～4.75
- 4.65～4.75
- 4.7125～4.8125
- 4.75 ～4.85
- 4.75～4.85
- 4.75～5.00
- 4.75 to 5.25
- 4.85 ～4.95
- 4.85～4.95
- 4.9~5.0
- 4.90～5.00
- 4.95 ～5.05
- 4.95～5.05
- 5
- 5.0～4.0
- 5.0～4.5
- 5.00～5.25
- 5.0～5.5
- 5～5.5
- 5–6
- 5.0～25.0
- 5.0～32.0
- 5.05 ～5.15
- 5.05～5.15
- 5.15 ～5.25
- 5.15～5.25
- 5.25 ～5.35
- 5.25～5.35
- 5.25～5.50
- 5.25～5.75
- 5.35 ～5.45
- 5.35～5.45
- 5.4～5.5
- 5.40～5.50
- 5.45 ～5.55
- 5.45～5.55
- 5.5
- 5.5～5.0
- 5.50～5.75
- 5.5–6.0
- 5.55 ～5.65
- 5.55～5.65
- 5.65 ～5.75
- 5.65～5.75
- 5.75 ～5.85
- 5.75～5.85
- 5.75～6.00
- 5.85 ～5.95
- 5.85～5.95
- 5.9～6.0
- 5.90～6.00
- 5.95 ～6.05
- 5.95～6.05
- 6
- 6.0～5.0
- 6.0～5.5
- 6 to 6.5
- 6.0–6.5
- 6–7
- 6.0～25.0
- 6.05～6.15
- 6.15～6.25
- 6.2
- 6.25～6.35
- 6.35～6.45
- 6.4～6.5
- 6.45～6.55
- 6.5～6.0
- 6.5 to 7.0
- 6.55～6.65
- 6.65～6.75
- 6.75～6.85
- 6.85～6.95
- 6.9～7.0
- 6.95～7.05
- 7
- 7.0～6.0
- 7.0～6.5
- 7.0～7.5
- 7～7.5
- 7–8
- 7.05～7.15
- 7.15～7.25
- 7.25～7.35
- 7.35～7.45
- 7.4～7.5
- 7.45～7.55
- 7.5～8.0
- 7.5～25.4
- 7.55～7.65
- 7.65～7.75
- 7.75～7.85
- 7.85～7.95
- 7.9～8.0
- 8
- 8.0～7.0
- 8~8.5
- 8.0～8.5
- 8–9
- 8～25.4
- 8.4～8.5
- 8.5
- 8.5～9.0
- 8.9～9.0
- 9
- 9.0～8.0
- 9.0～9.5
- 9～9.5
- 9–10
- 9.4～9.5
- 9.5 to 10.0
- 9.9～10.0
- 10
- 10.0～9.0
- 10.0 ～10.5
- 10.0～10.5
- 10～10.5
- 10~11
- 10–16
- 10–20
- 10.4~10.5
- 10.5
- 10.5～11.0
- 10.9～11.0
- 11
- 11.0～10.0
- 11.0～11.5
- 11～11.5
- 11~12
- 11.4～11.5
- 11.5～12.0
- 11.9～12.0
- 12
- 12.0～11.0
- 12.0～12.5
- 12～12.5
- 12~13
- 12.4~12.5
- 12.5
- 12.5～13.0
- 12.9～13.0
- 13.0～12.0
- 13.0～13.5
- 13～14
- 13.4～13.5
- 13.5～14.0
- 13.9~14.0
- 14
- 14.0～13.0
- 14.0～14.5
- 14~15
- 14.4～14.5
- 14.5～15.0
- 14.9～15.0
- 15.0～14.0
- 15.0～15.5
- 15~16
- 15.4～15.5
- 15.5～16.0
- 15.9～16.0
- 16
- 16.0～15.0
- 16.0～16.5
- 16～17
- 16～25
- 16.0～25.4
- 16.0～32.0
- 16.4～16.5
- 16.5
- 16.5～17.0
- 16.9～17.0
- 17.0～16.0
- 17.0～17.5
- 17～18
- 17.4～17.5
- 17.5～18.0
- 17.9～18.0
- 18
- 18.0～17.0
- 18.0～18.5
- 18~19
- 18.4～18.5
- 18.5～19.0
- 18.9～19.0
- 19
- 19.0～18.0
- 19.0～19.5
- 19～20
- 19.4～19.5
- 19.5～20.0
- 19.9～20.0
- 20
- 20.0～19.0
- 21
- 21.0～20.0
- 22
- 22.0～21.0
- 23
- 23.0～22.0
- 24
- 24.0～23.0
- 25
- 25.0～24.0
- 28.0～27.0
- 30.0～29.0
- 32
- 32.0～31.0
- 38
- 39
- 40
- 50
- 75
- 80
- 100
- 125
- 150
- 160
- 200
- 200～
-
Chuck Type
- Gerade Klemmhülse
- Aufgeschrumpft
- Seitenverriegelung
-
Holder Length L(mm)
- 15.5
- 16
- 16.5
- 19.5
- 24.5
- 26.5
- 29
- 29.5
- 30
- 33
- 34
- 35
- 35.6
- 37
- 40
- 43
- 44
- 44.1
- 44.8
- 45
- 47
- 48
- 50
- 52
- 53
- 54
- 54.6
- 55
- 55.5～62.5
- 57
- 60
- 60.8
- 62
- 62.5
- 63
- 64.6
- 65
- 66
- 67
- 67.5
- 68.5
- 68.6
- 70
- 71
- 73.6
- 74
- 75
- 76.5
- 76.5～83.5
- 77
- 79
- 79.5～91.5
- 80
- 81
- 81.5
- 82
- 84
- 84.5
- 85
- 85.5
- 87.5～94.5
- 90
- 90.5
- 91
- 93
- 94.5
- 95
- 95/135/165
- 96
- 97
- 97.1～108.1
- 97.5
- 98
- 100
- 100/140/170
- 101.6
- 102.1～113.1
- 105
- 105.5
- 107
- 107.5
- 109
- 110
- 111.5
- 112
- 113
- 115
- 115.5～122.5
- 120
- 120/160/190
- 121
- 122
- 123
- 125
- 125/175/205
- 127
- 129.5
- 130
- 131.5
- 132
- 135
- 137
- 137.1～148.1
- 137.5
- 140
- 142
- 143
- 145
- 148
- 149.5
- 150
- 155
- 156
- 160
- 160.5～167.5
- 163
- 165
- 167.5
- 170
- 174.0
- 175
- 175.5～182.5
- 176.5
- 180
- 181
- 182.1～193.1
- 185
- 187
- 190
- 192
- 195
- 200
- 202.5
- 210
- 218
- 220
- 225
- 226.0
- 240
- 250
- 255
- 275
- 283
- 285
- 300
- 375
-
Maximum Allowable Rotational Speed(min-1)
-
Coolant System
- Hülse mit mittiger Öffnung (Klingenschutzhülse)
- Lücke
Suchergebnisse durch Herstellerauswahl einschränken
-
- BIG KAISER (91)
- YUKIWA SEIKO (78)
- NIKKEN KOSAKUSHO (69)
- TRUSCO NAKAYAMA (61)
- MANYO TOOLS (57)
- SANDVIK (57)
- AMF (44)
- TAKURA KOGU (30)
- KATO MFG (23)
- NOGAJAPAN (17)
- MITUTOYO (13)
- SHOWA TOOL (12)
- NORELEM (8)
- NISSIN SANGYO (7)
- FUSO SEIKI (5)
- NIKKI (4)
- NIIGATA SEIKI (3)
- OSG (3)
- EARTH MAN (2)
- FUJI TOOL (2)
- KASAHARA (2)
- NEW STRONG (2)
- ALBRECHT (1)
- BLUEBIRD (1)
- NT TOOL (1)
- SKC (1)
- SHINWA RULES (1)
- TOHIN SHOJI (1)
- VERTEX (1)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Werkzeuge
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.