TRUSCO NAKAYAMA Werkzeuge（Product Category：Anschlüsse/Zubehör）
Suche durch Präzisierung der Kategorie der unteren Klasse
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
Drehtisch Flanschbolzen- und Mutter-Set
TRUSCO NAKAYAMA
For scroll chucks compatible with front mounting.ab∗ ： 45.13 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
![Bohrhülse [für Morsekegel]](//de.misumi-ec.com/linked/material/fs/TRC1/PHOTO/t010002765232.jpg?$product_view_b$)
Bohrhülse [für Morsekegel]
TRUSCO NAKAYAMA
[Features]
· Use when making the drill or reamer Morse taper size smaller. (Such as when aligning to the spindle taper size of the drilling machine being used)ab∗ ： 46.79 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Drehtisch (vertikaler Einsatz)
TRUSCO NAKAYAMA
[Features]
· : It is ideal for table mounting, arc cutting, boring counterbore, etc., and can also be used vertically.
·The table rotates 4 degrees for each rotation of the handle.
[Applications]
· For an accurate angle calculation.ab∗ ： 809.11 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Drehtisch (zentrale Kalibrierwelle)
TRUSCO NAKAYAMA
[Features]
· Centering and installation of flange and scroll chucks can be performed easily and accurately as a center correcting shaft is used.ab∗ ： 66.85 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Line Master (starrer Härtetyp), L32-130
TRUSCO NAKAYAMA
[Features]
· It allows easy scribing.
· Milling chuck and side lock holder can be used to easily attach it to various machines.
· Since it uses a spring to move in the axial direction, it can also scribe on a tapered surface.
[Applications]
· Can be attached to milling chucks, etc., for scribing.ab∗ ： 184.19 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Line Master (starrer Härtetyp), L32-130K
TRUSCO NAKAYAMA
It allows easy scribing. Easily attached to any machineab∗ ： 48.38 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Line Master (Typ mit Hartmetallspitze), S32-130
TRUSCO NAKAYAMA
[Features]
· It allows easy scribing.
· Milling chuck and side lock holder can be used to easily attach it to various machines.
· Since it uses a spring to move in the axial direction, it can also scribe on a tapered surface.
· The scribe part can be fixed by the lever.
· A carbide chip is used at the scribe part.
[Applications]
· Can be attached to milling chucks, etc., for scribing.ab∗ ： 247.90 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Line Master (Typ mit Hartmetallspitze), S32-130K
TRUSCO NAKAYAMA
It allows easy scribing. A carbide tip is used for the scribe tipab∗ ： 141.66 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Zentrierplatte „SUKEITA“【15 Stk. pro Packung】
TRUSCO NAKAYAMA
[Features]
· Can be used with great convenience for the centering of all lathes, planing boards, milling machines, shaper presses, and drilling machines when placed underneath various cutting bits, jigs, and other items.
· It can also be used for thickness adjustment.
[Applications]
· For centering work.ab∗ ： 22.79 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
![Bohrsockel [für Morsekegel]](//de.misumi-ec.com/linked/material/fs/TRC1/PHOTO/t010002765230.jpg?$product_view_b$)
Bohrsockel [für Morsekegel]
TRUSCO NAKAYAMA
[Features]
· Use to change or extend the size of Morse tapers.ab∗ ： 106.49 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Buchse Bohrmaschine
TRUSCO NAKAYAMA
[Features]
· Used to change Jacobs taper JT6 (2 1/2) of drill press to Morse taper (MT).
[Applications]
· Used to change Jacobs taper JT6 (2 1/2) of drill press to Morse taper (MT).ab∗ ： 156.71 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Revolverhülse
TRUSCO NAKAYAMA
[Features]
· Straight shafts are changed to Morse tapered shafts in the milling machine and machining center.
[Applications]
· Straight shafts are changed to Morse tapered shafts in the milling machine and machining center.ab∗ ： 125.76 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Austreiber
TRUSCO NAKAYAMA
[Features]
· Used for taking out drills from drill sleeves or drill sockets.ab∗ ： 10.80 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Aufnahmedorn
TRUSCO NAKAYAMA
[Features]
· Used on drill presses and lathes by attaching drill chucks, etc. on arbors as with sleeves and sockets.ab∗ ： 33.97 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Schlüsselloses Spannfutter
TRUSCO NAKAYAMA
[Features]
· The chuck handle is not required, and it is possible to attach and detach the drill with manual rotation alone.
· It is an internal design that naturally increases the gripping force when centrifugal force is generated in the spindle rotation direction.
· Mainly installed onto boring machines for attaching drills.ab∗ ： 151.52 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Schlüsselloses Spannfutter (MT-Schaft integriert)
TRUSCO NAKAYAMA
[Features]
· Keyless chuck and integrated MT shank reduce the hassle of mounting.
· The chuck handle is not required, and it is possible to attach and detach the drill with manual rotation alone.
· It is an internal design that naturally increases the gripping force when centrifugal force is generated in the spindle rotation direction.
· Chuck arbor is quenched and polished.
[Applications]
· Mainly used mounted on lathes to mount a drill.ab∗ ： 125.28 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Schlüsselloses Spannfutter (MT-Schaft integriert)
TRUSCO NAKAYAMA
[Features]
· A hook wrench for keyless chucks.
· For TKL1320, TKL1330, and TKL1340.ab∗ ： 10.94 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
Drehtisch, Schraube Ausführung T
TRUSCO NAKAYAMA
[Merkmale]
T-förmige Schraube zur Einstellung der Position der Referenzskala.
-Gewicht (g): 150ab∗ ： 33.01 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Zentrierplatte SUKEITA, lose
TRUSCO NAKAYAMA
[Features]
· Can be used with great convenience for the centering of all lathes, planing boards, milling machines, shaper presses, and drilling machines when placed underneath various cutting bits, jigs, and other items.
· It can also be used for thickness adjustment.
[Applications]
· For centering work.ab∗ ： 5.71 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
![Bohrhülse [für Morsekegel]](http://de.misumi-ec.com/linked/material/fs/TRC1/PHOTO/t010002765232.jpg?$product_view_b$)
![Bohrsockel [für Morsekegel]](http://de.misumi-ec.com/linked/material/fs/TRC1/PHOTO/t010002765230.jpg?$product_view_b$)
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Product Category |
| Applicable Manufacturing Machinery (main unit) |
| Spindle types |
| HSK type |
| Tool Type |
| Retainable blade diameter(mm) |
| Chuck Type |
| Holder Length L(mm) |
| Maximum Allowable Rotational Speed(min-1) |
| Coolant System |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA | TRUSCO NAKAYAMA |
| Artikelserie | |||||||||||||||||||
| ab∗ | 45.13 € *Stückpreis Standardkonfiguration | 46.79 € *Stückpreis Standardkonfiguration | 809.11 € *Stückpreis Standardkonfiguration | 66.85 € *Stückpreis Standardkonfiguration | 184.19 € *Stückpreis Standardkonfiguration | 48.38 € *Stückpreis Standardkonfiguration | 247.90 € *Stückpreis Standardkonfiguration | 141.66 € *Stückpreis Standardkonfiguration | 22.79 € *Stückpreis Standardkonfiguration | 106.49 € *Stückpreis Standardkonfiguration | 156.71 € *Stückpreis Standardkonfiguration | 125.76 € *Stückpreis Standardkonfiguration | 10.80 € *Stückpreis Standardkonfiguration | 33.97 € *Stückpreis Standardkonfiguration | 151.52 € *Stückpreis Standardkonfiguration | 125.28 € *Stückpreis Standardkonfiguration | 10.94 € *Stückpreis Standardkonfiguration | 33.01 € *Stückpreis Standardkonfiguration | 5.71 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit ： | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | Versand am selben Tag | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 6 Arbeitstage | 9 Arbeitstage | 6 Arbeitstage | 9 Arbeitstage | 7 Arbeitstage | 6 Arbeitstage |
| Product Category | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör | Anschlüsse/Zubehör |
| Applicable Manufacturing Machinery (main unit) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Spindle types | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| HSK type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Tool Type | - | Bohrung / Senker | - | - | - | - | - | - | - | - | - | - | Bohrung | - | - | - | - | - | - |
| Retainable blade diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Chuck Type | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Holder Length L(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Maximum Allowable Rotational Speed(min-1) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Coolant System | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
![Bohrhülse [für Morsekegel]](http://de.misumi-ec.com/linked/material/fs/TRC1/PHOTO/t010002765232.jpg?$product_view_c$)
![Bohrsockel [für Morsekegel]](http://de.misumi-ec.com/linked/material/fs/TRC1/PHOTO/t010002765230.jpg?$product_view_c$)
Loading...
Filtern nach:
Stock
-
- Stock Items Included
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Product Category
- Grundkörper
- Anschlüsse/Zubehör
- Heiz- und Kühlgeräte
- Messgeräte
-
Applicable Manufacturing Machinery (main unit)
- Bearbeitungszentren
- Allgemeine Maschine
-
Spindle types
- BT30
- BT40
- BT50
- HSK-A
- HSK-E
-
HSK type
-
Tool Type
- Schaftfräser
- Bohrung
- Senker
- Walzenstirnfräser
- Hahn
-
Retainable blade diameter(mm)
- 0.25～0.50
- 0.25～ 6
- 0.3~3
- 0.45 ～0.55
- 0.45～3.25
- 0.45～4.05
- 0.45～6.05
- 0.50 to 0.75
- 0.5 to 0.75
- 0.5～5.0
- 0.5～ 6
- 0.5～6.5
- 0.5～7.0
- 0.5 ～ 8
- 0.5～8
- 0.5～ 8
- 0.5–10
- 0.5～10.0
- 0.5～13
- 0.5～13.0
- 0.55 ～0.65
- 0.65 ～0.75
- 0.75 ～0.85
- 0.75～1.0
- 0.75～1.00
- 0.85 ～0.95
- 0.95 ～1.05
- 1
- 1.0～0.5
- 1.0~1.25
- 1.00～1.25
- 1 to 13
- 1.05 ～1.15
- 1.15 ～1.25
- 1.25 ～1.35
- 1.25～1.5
- 1.25～1.50
- 1.35 ～1.45
- 1.4 to 1.5
- 1.45 ～1.55
- 1.5
- 1.5～1.0
- 1.50～1.75
- 1.5～1.75
- 1.5 to 10
- 1.5 ～10
- 1.55 ～1.65
- 1.65 ～1.75
- 1.75 ～1.85
- 1.75～2.0
- 1.75～2.00
- 1.85 ～1.95
- 1.95 ～2.05
- 2
- 2.0～1.5
- 2.00～2.25
- 2.0～2.25
- 2.0～10.0
- 2.05 ～2.15
- 2.15 ～2.25
- 2.25 ～2.35
- 2.25～2.5
- 2.25～2.50
- 2.35 ～2.45
- 2.4～2.5
- 2.45 ～2.55
- 2.5
- 2.5 to 2.0
- 2.50～2.75
- 2.5～2.75
- 2.5–3.0
- 2.5 ～13
- 2.5～13
- 2.5 to 16
- 2.5 ～16
- 2.5～16.0
- 2.5 ～20
- 2.5～20
- 2.55 ～2.65
- 2.65 ～2.75
- 2.675～3.175
- 2.75 ～2.85
- 2.75～3.0
- 2.75～3.00
- 2.75～3.25
- 2.85 ～2.95
- 2.9～3.0
- 2.925～3.175
- 2.95 ～3.05
- 2.95～3.05
- 2.95～8.05
- 3
- 3.0～2.5
- 3.00～3.25
- 3~3.5
- 3.0–3.5
- 3–4
- 3～ 6
- 3～ 8
- 3–10
- 3 to 12
- 3 to 16
- 3.05 ～3.15
- 3.05～3.15
- 3.125～3.225
- 3.15 ～3.25
- 3.15～3.25
- 3.175
- 3.25 ～3.35
- 3.25～3.35
- 3.25～3.50
- 3.25～3.75
- 3.35 ～3.45
- 3.35～3.45
- 3.4~3.5
- 3.40～3.50
- 3.45 ～3.55
- 3.45～3.55
- 3.5～3.0
- 3.50～3.75
- 3.5～4.0
- 3.5～20.0
- 3.55 ～3.65
- 3.55～3.65
- 3.65 ～3.75
- 3.65～3.75
- 3.75 ～3.85
- 3.75～3.85
- 3.75～4.00
- 3.75～4.25
- 3.75～ 4.25
- 3.85 ～3.95
- 3.85～3.95
- 3.9～4.0
- 3.90～4.00
- 3.95 ～4.05
- 3.95～4.05
- 4
- 4.0～3.5
- 4.00～4.25
- 4~4.5
- 4.0–4.5
- 4–5
- 4.05 ～4.15
- 4.05～4.15
- 4.15 ～4.25
- 4.15～4.25
- 4.25 ～4.35
- 4.25～4.35
- 4.25～4.50
- 4.25～4.75
- 4.25～ 4.75
- 4.35 ～4.45
- 4.35～4.45
- 4.4～4.5
- 4.40～4.50
- 4.45 ～4.55
- 4.45～4.55
- 4.5～4.0
- 4.50～4.75
- 4.5–5.0
- 4.55 ～4.65
- 4.55～4.65
- 4.65 ～4.75
- 4.65～4.75
- 4.7125～4.8125
- 4.75 ～4.85
- 4.75～4.85
- 4.75～5.00
- 4.75 to 5.25
- 4.85 ～4.95
- 4.85～4.95
- 4.9~5.0
- 4.90～5.00
- 4.95 ～5.05
- 4.95～5.05
- 5
- 5.0～4.0
- 5.0～4.5
- 5.00～5.25
- 5.0～5.5
- 5～5.5
- 5–6
- 5.0～25.0
- 5.05 ～5.15
- 5.05～5.15
- 5.15 ～5.25
- 5.15～5.25
- 5.25 ～5.35
- 5.25～5.35
- 5.25～5.50
- 5.25～5.75
- 5.35 ～5.45
- 5.35～5.45
- 5.4～5.5
- 5.40～5.50
- 5.45 ～5.55
- 5.45～5.55
- 5.5
- 5.5～5.0
- 5.50～5.75
- 5.5–6.0
- 5.55 ～5.65
- 5.55～5.65
- 5.65 ～5.75
- 5.65～5.75
- 5.75 ～5.85
- 5.75～5.85
- 5.75～6.00
- 5.85 ～5.95
- 5.85～5.95
- 5.9～6.0
- 5.90～6.00
- 5.95 ～6.05
- 5.95～6.05
- 6
- 6.0～5.0
- 6.0～5.5
- 6 to 6.5
- 6.0–6.5
- 6–7
- 6.05～6.15
- 6.15～6.25
- 6.2
- 6.25～6.35
- 6.35～6.45
- 6.4～6.5
- 6.45～6.55
- 6.5～6.0
- 6.5 to 7.0
- 6.55～6.65
- 6.65～6.75
- 6.75～6.85
- 6.85～6.95
- 6.9～7.0
- 6.95～7.05
- 7
- 7.0～6.0
- 7.0～6.5
- 7.0～7.5
- 7～7.5
- 7–8
- 7.05～7.15
- 7.15～7.25
- 7.25～7.35
- 7.35～7.45
- 7.4～7.5
- 7.45～7.55
- 7.5～8.0
- 7.55～7.65
- 7.65～7.75
- 7.75～7.85
- 7.85～7.95
- 7.9～8.0
- 7.95～8.05
- 8
- 8.0～7.0
- 8~8.5
- 8.0～8.5
- 8–9
- 8.4～8.5
- 8.5
- 8.5～9.0
- 8.9～9.0
- 9
- 9.0～8.0
- 9.0～9.5
- 9～9.5
- 9–10
- 9.4～9.5
- 9.5 to 10.0
- 9.9～10.0
- 10
- 10.0～9.0
- 10.0 ～10.5
- 10.0～10.5
- 10～10.5
- 10~11
- 10.4~10.5
- 10.5
- 10.5～11.0
- 10.9～11.0
- 11
- 11.0～10.0
- 11.0～11.5
- 11～11.5
- 11~12
- 11.4～11.5
- 11.5～12.0
- 11.9～12.0
- 12
- 12.0～11.0
- 12.0～12.5
- 12～12.5
- 12~13
- 12.4~12.5
- 12.5
- 12.5～13.0
- 12.9～13.0
- 13.0～12.0
- 13.0～13.5
- 13～14
- 13.4～13.5
- 13.5～14.0
- 13.9~14.0
- 14
- 14.0～13.0
- 14.0～14.5
- 14~15
- 14.4～14.5
- 14.5～15.0
- 14.9～15.0
- 15.0～14.0
- 15.0～15.5
- 15~16
- 15.4～15.5
- 15.5～16.0
- 15.9～16.0
- 16
- 16.0～15.0
- 16.0～16.5
- 16～17
- 16.4～16.5
- 16.5
- 16.5～17.0
- 16.9～17.0
- 17.0～16.0
- 17.0～17.5
- 17～18
- 17.4～17.5
- 17.5～18.0
- 17.9～18.0
- 18
- 18.0～17.0
- 18.0～18.5
- 18~19
- 18.4～18.5
- 18.5～19.0
- 18.9～19.0
- 19
- 19.0～18.0
- 19.0～19.5
- 19～20
- 19.4～19.5
- 19.5～20.0
- 19.9～20.0
- 20
- 20.0～19.0
- 21
- 22
- 23
- 24
- 25
- 32
- 32.0～31.0
- 38
- 39
- 40
- 50
-
Chuck Type
- Aufgeschrumpft
- Seitenverriegelung
-
Holder Length L(mm)
- 15.5
- 16
- 16.5
- 19.5
- 24.5
- 26.5
- 29
- 30
- 33
- 34
- 35
- 40
- 43
- 44
- 44.1
- 45
- 47
- 50
- 52
- 53
- 54
- 54.6
- 55
- 60
- 62
- 62.5
- 67.5
- 68.5
- 70
- 74
- 75
- 77
- 80
- 81
- 84.5
- 85
- 90
- 90.5
- 91
- 93
- 94.5
- 95
- 95/135/165
- 96
- 97.5
- 100
- 100/140/170
- 105
- 105/145/175
- 107
- 107.5
- 110
- 111.5
- 115
- 120
- 120/160/190
- 121
- 122
- 125
- 125/175/205
- 130
- 130/180/210
- 131.5
- 132
- 135
- 137
- 137.5
- 140
- 140/190/220
- 145/195/225
- 150
- 155
- 160
- 165
- 167.5
- 176.5
- 185
- 190
- 195
- 200
- 202.5
- 220
- 235
- 250
- 300
- 335
- 350
- 360
-
Maximum Allowable Rotational Speed(min-1)
-
Coolant System
- Hülse mit mittiger Öffnung (Klingenschutzhülse)
- Lücke
Suchergebnisse durch Herstellerauswahl einschränken
-
- BIG KAISER (61)
- YUKIWA SEIKO (36)
- MANYO TOOLS (30)
- TRUSCO NAKAYAMA (19)
- TAKURA KOGU (17)
- KATO MFG (8)
- SHOWA TOOL (7)
- EARTH MAN (2)
- NEW STRONG (2)
- SANDVIK (2)
- ALBRECHT (1)
- BLUEBIRD (1)
- FUJI TOOL (1)
- NIIGATA SEIKI (1)
- NT TOOL (1)
- SKC (1)
- SHINWA RULES (1)
- VERTEX (1)
- TOHIN SHOJI (0)
- AMF (0)
- NIKKI (0)
- KASAHARA (0)
- FUSO SEIKI (0)
- NOGAJAPAN (0)
- OSG (0)
- NISSIN SANGYO (0)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Werkzeuge
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.