YOSHIDA MFG Kupplungen / Schnellkupplungen（Ausführung：Standard）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
Buchse AC-Serie, SM-Form
YOSHIDA MFG
Lightweight design suitable for connection of hand tools. *The main body is made from steel only, so it cannot be used in water.
[Features]
· Lightweight design suitable for connection of hand tools.
· Can be easily and reliably connected with a one-touch operation by just inserting the plug into the socket.
· Not usable in water, because the main body is only available in steel.
· May only be used with air.- Mengenrabatt
ab∗ ： 17.62 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Buchse HP-Serie, HP-Typ
YOSHIDA MFG
[Features]
· This is a double path switching type coupling with built-in auto switching valves on both socket and plug.
· The valve sets down when the socket and plug separate, and the socket and plug are also completely sealed.
· S45C is used for the main body material, and as heat treatment has been performed the durability and abrasion resistance are both excellent.
· Designed especially for high pressure use, and therefore, the product is strong against vibration and shock. It is ideal for use in high pressure hydraulic equipment and high pressure gas applications.
· The structure has very low pressure loss, and therefore is suitable for high pressure oil and air pressure paths.ab∗ ： 40.41 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Buchse AC-Serie, SF-Typ
YOSHIDA MFG
[Features]
· Lightweight design suitable for manual connection of hand tools, etc.
· Can be easily and reliably connected with one-touch operation by just inserting the plug into the socket.
· Not usable in water, because the main body is available only in steel.
· Applicable fluid is air only.ab∗ ： 17.62 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Buchse AC-Serie, SH
YOSHIDA MFG
Lightweight design suitable for connections made with hand tools, etc.* The main body is made from steel only, so it cannot be used in water.
[Features]
· Lightweight design is suitable for connections made with hand tools.
· Can be easily and reliably connected via one-touch operation by simply inserting the plug into the socket.
· Not usable in water, as the main body is only available in steel.
· Only supports air as a usable fluidab∗ ： 17.62 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Buchse AC-Serie, SN-Typ
YOSHIDA MFG
[Features]
· Lightweight design suitable for manual connection of hand tools, etc.
· Can be easily and reliably connected with one-touch operation by just inserting the plug into the socket.
· Not usable in water, because the main body is available only in steel.
· Applicable fluid is air only.ab∗ ： 20.06 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Stecker AC-Serie, PF-Form
YOSHIDA MFG
Lightweight design suitable for connections made with hand tools, etc.* The main body is made from steel only, so it cannot be used in water.
[Features]
· Lightweight design is suitable for connections made with hand tools.
· Can be easily and reliably connected via one-touch operation by simply inserting the plug into the socket.
· Not usable in water, as the main body is only available in steel.
· Only supports air as a usable fluid- Mengenrabatt
ab∗ ： 2.99 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Stecker AC-Serie, PH-Form
YOSHIDA MFG
Lightweight design suitable for connections made with hand tools, etc.* The main body is made from steel only, so it cannot be used in water.
[Features]
· Lightweight design is suitable for connections made with hand tools.
· Can be easily and reliably connected via one-touch operation by simply inserting the plug into the socket.
· Not usable in water, as the main body is only available in steel.
· Only supports air as a usable fluid- Mengenrabatt
ab∗ ： 2.40 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Stecker AC-Serie, PM-Typ
YOSHIDA MFG
A lightweight design suitable for connection with hand tools. * Main body is made from steel only and cannot be used in water.- Mengenrabatt
ab∗ ： 2.75 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Stecker AC-Serie, PN-Form
YOSHIDA MFG
Lightweight design suitable for connections made with hand tools, etc.* The main body is made from steel only, so it cannot be used in water.
[Features]
· Lightweight design is suitable for connections made with hand tools.
· Can be easily and reliably connected via one-touch operation by simply inserting the plug into the socket.
· Not usable in water, as the main body is only available in steel.
· Only supports air as a usable fluidab∗ ： 4.28 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Stecker HP-Serie, HP-Form
YOSHIDA MFG
Coupling with dual opening and closing channels. The valve is seated at the moment the socket and plug are separated, and both the socket and plug are completely sealed.
[Features]
· Hidden open and closing coupling with built-in automatic opening and closing valve for both socket and plug.
· The valve is seated at the moment the socket and plug are separated, and both the socket and plug are completely sealed. The material of the main body is S45C which has been heat treated to provide excellent durability and abrasion resistance.
· Specially designed for high-pressure environments, so shock and vibration resistance are high, and the product is optimal for high-pressure hydraulic equipment and high-pressure gas. The structure offers extremely low pressure losses, so it is suitable for high-pressure hydraulic and pneumatic channels.- Mengenrabatt
ab∗ ： 19.23 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Buchse KC-Serie, SF-Typ
YOSHIDA MFG
[Features]
· Space-saving design which can be used also for a mold whose water port interval is narrow.
· Socket can be attached/removed with the long sleeve method while the plug is embedded in a mold.
· Easily connect and disconnect mold cooling water hoses.
· All the sizes and mount shapes are standardized to support extensive mold applications.ab∗ ： 22.50 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Buchse KC-Serie, SH-Typ
YOSHIDA MFG
[Features]
· Space-saving design which can be used also for a mold whose water port interval is narrow.
· So compact that it can be used for molds whose model-nominal-diameter spouts are narrowly placed.
· Socket can be attached/removed with the long sleeve method while the plug is embedded in a mold.
· Easily connect and disconnect mold cooling water hoses.
· All the sizes and mount shapes are standardized to support extensive mold applications.- Mengenrabatt
ab∗ ： 24.12 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Buchse KC-Serie, SM-Typ
YOSHIDA MFG
[Features]
· Space-saving design which can be used also for a mold whose water port interval is narrow.
· Socket can be attached/removed with the long sleeve method while the plug is embedded to a mold.
· Easily connect and disconnect mold cooling water hoses.
· All the sizes and mount shapes are standardized to support extensive applications of molds.- Mengenrabatt
ab∗ ： 19.64 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Stecker KC-Serie, PF-Typ
YOSHIDA MFG
[Features]
· Space-saving design which can be used also for a mold whose water port interval is narrow.
· Socket can be attached/removed with the long sleeve method while the plug is embedded in a mold.
· Easily connect and disconnect mold cooling water hoses.
· All the sizes and mount shapes are standardized to support extensive mold applications.- Mengenrabatt
ab∗ ： 3.08 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Stecker KC-Serie, PH-Typ
YOSHIDA MFG
[Features]
· Space-saving design which can be used also for molds with narrow water port intervals.
· Socket can be attached/removed with the long sleeve method while the plug is embedded in a mold.
· Easily connect and disconnect mold cooling water hoses.
· All the sizes and mount shapes are standardized to support extensive mold applications.- Mengenrabatt
ab∗ ： 3.08 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Stecker KC-Serie, PM-Typ
YOSHIDA MFG
[Features]
· Space-saving design which can be used also for a mold whose water port interval is narrow.
· So compact that it can be used for molds whose model-nominal-diameter spouts are narrowly placed.
· Socket can be attached/removed with the long sleeve method while the plug is embedded in a mold.
· Easily connect and disconnect mold cooling water hoses.
· All the sizes and mount shapes are standardized to support extensive applications of molds.- Mengenrabatt
ab∗ ： 3.08 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Buchse KS-Serie, KS-Typ
YOSHIDA MFG
A coupling with dual opening and closing channels. The socket and plug can both be completely sealed when separated.- Mengenrabatt
ab∗ ： 20.82 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Stecker KS-Serie, KS-Form
YOSHIDA MFG
Coupling with dual opening and closing channels. The socket side and plug side can both be completely sealed when the socket and plug are separated.
[Features]
· Dual path open/close coupling with automatic open/close valves installed in both the socket and the plug.
· The socket side and plug side both become airtight the instant the socket and plug are separated.
· With a finishing touch making full use of recent machining technologies, this has superior airtightness both when separate and when connected.
· The path opens simultaneous with connecting and the path closes simultaneous with separating so there is little loss of fluid or air intrusion.
· A large variety with various nominal diameters, main body materials, O-rings, and valve packing materials are available allowing users to select the most optimal based on application and use conditions.- Mengenrabatt
ab∗ ： 14.94 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Buchse NL-Serie, SF-Typ
YOSHIDA MFG
[Features]
· No need to operate the master valve when attaching/removing the plug because the automatic opening and closing valve built in to the socket opens/closes as the plug is attached/removed.
• Both socket and plug are available for male and female screw connections and hose connections, which can be combined freely.
· The fitting portions of NL21-NL24 with the same dimensions are compatible.
• NL44 to NL‐48 are also compatible.
• The main materials include steel, brass and stainless steel, and the parts made of steel are hardened to ensure excellent durability and abrasion resistance.
• We offer a variety of products, such as various factory piping and hydro-pneumatic tool hose connections, providing you with the best products to suit a wide range of operating conditions and applications.- Mengenrabatt
ab∗ ： 12.71 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Buchse NL-Serie, SH-Form
YOSHIDA MFG
[Features]
· No need to operate the master valve when attaching/removing the plug because the automatic opening and closing valve built in to the socket opens/closes as the plug is attached/removed.
• Both socket and plug are available for male and female screw connections and hose connections, which can be combined freely.
· The fitting portions of NL21-NL24 with the same dimensions are compatible.
• NL44 to NL‐48 are also compatible.
• The main materials include steel, brass and stainless steel, and the parts made of steel are hardened to ensure excellent durability and abrasion resistance.
• We offer a variety of products, such as various factory piping and hydro-pneumatic tool hose connections, providing you with the best products to suit a wide range of operating conditions and applications.- Mengenrabatt
ab∗ ： 12.71 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Buchse NL-Serie, SM-Typ
YOSHIDA MFG
[Features]
· No need to operate the master valve when attaching/removing the plug because the automatic opening and closing valve built in to the socket opens/closes as the plug is attached/removed.
• Both socket and plug are available for male and female screw connections and hose connections, which can be combined freely.
· The fitting portions of NL21-NL24 with the same dimensions are compatible.
• NL44 to NL‐48 are also compatible.
• The main materials include steel, brass and stainless steel, and the parts made of steel are hardened to ensure excellent durability and abrasion resistance.
• We offer a variety of products, such as various factory piping and hydro-pneumatic tool hose connections, providing you with the best products to suit a wide range of operating conditions and applications.- Mengenrabatt
ab∗ ： 5.62 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Kupplung mit Mutter NL-Serie, PB (SC)
YOSHIDA MFG
[Features]
· No need to operate the master valve every time the plug is attached/removed because the automatic opening and closing valve built into the socket opens/closes as the plug is attached/removed.
· Both socket and plug are available for male screw connection, female screw connection, and hose connection, which can be combined freely.
· The box portions of NL21 to NL24 with the same dimensions are compatible with each other.
· NL44 to NL4B are also compatible.
· The main materials include steel, brass, and stainless steel, and the key steel parts are hardened to ensure excellent durability and abrasion resistance.
· Wide variety of products available, such as various factory piping and hydro-pneumatic tool hose connections, suitable for a wide range of operating conditions and applications.- Mengenrabatt
ab∗ ： 3.98 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Kupplung mit Mutter NL-Serie, SB-Typ (SC)
YOSHIDA MFG
The valve built in to the socket automatically opens/closes as the plug is attached/removed, keeping you from having to operate the master valve.- Mengenrabatt
ab∗ ： 15.16 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Stecker NL-Serie, PFF-Typ (SC)
YOSHIDA MFG
The valve built in to the socket automatically opens/closes as the plug is attached/removed, keeping you from having to operate the master valve.- Mengenrabatt
ab∗ ： 2.35 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Stecker NL-Serie, PF-Typ
YOSHIDA MFG
[Features]
· No need to operate the master valve every time the plug is attached/removed because the automatic opening and closing valve built into the socket opens/closes as the plug is attached/removed.
· Both socket and plug are available for male screw connection, female screw connection, and hose connection, which can be combined freely.
· The fitting portions of NL21–NL24 with the same dimension are compatible with each other.
· NL44–NL48 are also compatible.
· The main materials include steel, brass, and stainless steel, and the key steel parts are hardened to ensure excellent durability and abrasion resistance.
· Wide variety of products available, such as various factory piping and hydro-pneumatic tool hose connections, suitable for a wide range of operating conditions and applications.- Mengenrabatt
ab∗ ： 1.96 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Stecker NL-Serie, PH-Typ
YOSHIDA MFG
The valve built in to the socket automatically opens/closes as the plug is attached/removed, keeping you from having to operate the master valve.- Mengenrabatt
ab∗ ： 1.82 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Stecker NL-Serie, PM
YOSHIDA MFG
[This week's sale products]offered at special promotion price until March 29. No need to operate the master valve every time attaching/removing the plug, because the automatic opening and closing valve built-in to the socket opens/closes as the plug is attached/removed.- Mengenrabatt
ab∗ ： 1.98 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Leitungsanschluss NL-Serie (SC)
YOSHIDA MFG
The valve built in to the socket automatically opens/closes as the plug is attached/removed, keeping you from having to operate the master valve.ab∗ ： 44.04 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Buchse TS-Serie, SF-Typ
YOSHIDA MFG
[Features]
· Both socket side and plug side adopt a two-way opening type coupling that does not include a valve mechanism.
· Optimal for piping routes which do not require shutoff fluid when separating the socket and plug.
· The internal structure generates less flow rate resistance, which results in less pressure loss; as a result, this product is suitable for pipes used with viscous fluid, steam, powder, etc.
· Both socket and plug are available for male screw connections, female screw connections, and hose connections, which can be combined freely.
· Wide variety of types, including nominal diameters, main body materials and O-ring material connection types are available.
· Selections can be made based on the intended application and use conditions- Mengenrabatt
ab∗ ： 15.98 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Buchse TS-Serie, SH-Typ
YOSHIDA MFG
[Features]
· A two-way opening type coupling without a valve mechanism in the socket or plug.
· Optimally suited for plumbing lines where it is not necessary to shut off the flow of fluid when separating the socket and plug.
· The internal structure generates less flow rate resistance, which results in less pressure loss. Therefore, this product is suitable for pipes using viscous fluids, steam, and powders, etc.
· Both the socket and plug are available for combining freely with male and female thread, and hose connections.
· We offer various products of nominal diameters, main body materials, and O-ring material connection methods, etc.
· You can choose to match your application and use conditions- Mengenrabatt
ab∗ ： 15.98 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Buchse TS-Serie, SM-Typ
YOSHIDA MFG
Both the socket side and plug side adopt a two-way opening type coupling that does not have a valve mechanism. Optimal for piping lines that do not require fluid to be shutoff when separating the socket and plug.- Mengenrabatt
ab∗ ： 13.52 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Stecker TS-Serie, PF-Typ
YOSHIDA MFG
Both the socket side and plug side adopt a two-way opening type coupling that does not have a valve mechanism. Optimal for piping lines not requiring fluid be shutoff when separating the socket and plug.
[Features]
-The internal structure of this piping path is flow-resistant, optimum for the pipe path, which does not require fluid blocking when removing socket and plug. Consequently, minimal pressure is lost, optimal for piping for flow rate, vapor and powder with a high coefficient and both draw-socket and plug have male screw connection, female screw connection and hose connection, allowing for any combination of use.
-Many types are available to suit various conditions of use, such as for nominal diameter, main body material, O-ring material connection method.- Mengenrabatt
ab∗ ： 10.07 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Stecker TS-Serie, PH-Typ
YOSHIDA MFG
Both the socket and plug have a two-way coupling with no valve mechanism. Optimal for piping lines that do not require fluid shutoff when unplugging.- Mengenrabatt
ab∗ ： 11.00 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Stecker TS-Serie, PM-Typ
YOSHIDA MFG
Both the socket and plug have a two-way coupling with no valve mechanism. Optimal for piping lines that do not require fluid shutoff when unplugging.- Mengenrabatt
ab∗ ： 10.07 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Buchse YNL-Serie, SB-Typ
YOSHIDA MFG
The valve built in to the socket automatically opens/closes as the plug is attached/removed, keeping you from having to operate the master valve.- Mengenrabatt
ab∗ ： 18.43 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Buchse YNL-Serie, SF-Typ
YOSHIDA MFG
The valve built in to the socket automatically opens/closes as the plug is attached/removed, keeping you from having to operate the master valve.- Mengenrabatt
ab∗ ： 15.98 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Buchse YNL-Serie, SH-Typ
YOSHIDA MFG
[Features]
· As with the NL series, there is no need to operate the master valve every time the plug is attached/removed because the automatic opening and closing valve built into the socket opens/closes as the plug is attached/removed.
· Can be easily and reliably connected with a one-touch operation by just inserting the plug into the socket.
· YNL one-touch socket and standard NL series plug are used.
· Cannot be used in water because the socket main body is only available in steel.
· Both socket and plug are available for male screw connection, female screw connection, hose connection, and urethane hose connection, which can be combined freely.
· For use with air only.- Mengenrabatt
ab∗ ： 15.98 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Buchse YNL-Serie, SM
YOSHIDA MFG
The valve built in to the socket automatically opens/closes as the plug is attached/removed, keeping you from having to operate the master valve.- Mengenrabatt
ab∗ ： 15.98 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Ausführung |
| Verbindertyp |
| Stecker/Buchse |
| Haupteinheits-Material |
| Dichtungswerkstoff |
| Zulässige Flüssigkeit |
| Ventilstruktur |
| Betriebsumgebung, Anwendungen |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG | YOSHIDA MFG |
| Artikelserie | ||||||||||||||||||||||||||||||||||||||
| ab∗ | 17.62 € *Stückpreis Standardkonfiguration Mengenrabatt | 40.41 € *Stückpreis Standardkonfiguration | 17.62 € *Stückpreis Standardkonfiguration | 17.62 € *Stückpreis Standardkonfiguration | 20.06 € *Stückpreis Standardkonfiguration | 2.99 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.40 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.75 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.28 € *Stückpreis Standardkonfiguration | 19.23 € *Stückpreis Standardkonfiguration Mengenrabatt | 22.50 € *Stückpreis Standardkonfiguration | 24.12 € *Stückpreis Standardkonfiguration | 19.64 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.08 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.08 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.08 € *Stückpreis Standardkonfiguration Mengenrabatt | 20.82 € *Stückpreis Standardkonfiguration Mengenrabatt | 14.94 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.71 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.71 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.62 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.98 € *Stückpreis Standardkonfiguration Mengenrabatt | 15.16 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.35 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.96 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.82 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.98 € *Stückpreis Standardkonfiguration Mengenrabatt | 44.04 € *Stückpreis Standardkonfiguration | 15.98 € *Stückpreis Standardkonfiguration Mengenrabatt | 15.98 € *Stückpreis Standardkonfiguration Mengenrabatt | 13.52 € *Stückpreis Standardkonfiguration Mengenrabatt | 10.07 € *Stückpreis Standardkonfiguration Mengenrabatt | 11.00 € *Stückpreis Standardkonfiguration Mengenrabatt | 10.07 € *Stückpreis Standardkonfiguration Mengenrabatt | 18.43 € *Stückpreis Standardkonfiguration Mengenrabatt | 15.98 € *Stückpreis Standardkonfiguration | 15.98 € *Stückpreis Standardkonfiguration Mengenrabatt | 15.98 € *Stückpreis Standardkonfiguration Mengenrabatt |
| Minimum Lieferzeit ： | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | 6 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | Versand am selben Tag | 5 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage |
| Ausführung | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
| Verbindertyp | Mit Gewinde | Mit Gewindebohrung | Mit Gewindebohrung | Für Schlauchhalterung | Mutter Anzug | Mit Gewindebohrung | Für Schlauchhalterung | Mit Gewinde | Mutter Anzug | Mit Gewindebohrung | Mit Gewindebohrung | Für Schlauchhalterung | Mit Gewinde | Mit Gewindebohrung | Für Schlauchhalterung | Mit Gewinde | Mit Gewindebohrung | Mit Gewindebohrung | Mit Gewindebohrung | Für Schlauchhalterung | Mit Gewinde | Mutter Anzug | Mutter Anzug | Mit Gewindebohrung | Mit Gewindebohrung | Für Schlauchhalterung | Mit Gewinde | Sonstige | Mit Gewindebohrung | Für Schlauchhalterung | Mit Gewinde | Mit Gewindebohrung | Für Schlauchhalterung | Mit Gewinde | Mutter Anzug | Mit Gewindebohrung | Für Schlauchhalterung | Mit Gewinde |
| Stecker/Buchse | Buchse (weiblich) | Buchse (weiblich) | Buchse (weiblich) | Buchse (weiblich) | Buchse (weiblich) | Stecker (Außengewinde) | Stecker (Außengewinde) | Stecker (Außengewinde) | Stecker (Außengewinde) | Stecker (Außengewinde) | Buchse (weiblich) | Buchse (weiblich) | Buchse (weiblich) | Stecker (Außengewinde) | Stecker (Außengewinde) | Stecker (Außengewinde) | Buchse (weiblich) | Stecker (Außengewinde) | Buchse (weiblich) | Buchse (weiblich) | Buchse (weiblich) | Stecker (Außengewinde) | Buchse (weiblich) | Stecker (Außengewinde) | Stecker (Außengewinde) | Stecker (Außengewinde) | Stecker (Außengewinde) | Stecker/Buchse, Satz | Buchse (weiblich) | Buchse (weiblich) | Buchse (weiblich) | Stecker (Außengewinde) | Stecker (Außengewinde) | Stecker (Außengewinde) | Buchse (weiblich) | Buchse (weiblich) | Buchse (weiblich) | Buchse (weiblich) |
| Haupteinheits-Material | Stahl | Stahl | Stahl | Stahl | Stahl | Stahl | Stahl | Stahl | Stahl | Stahl | Messing | Messing | Messing | Messing | Messing | Messing | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. / Messing | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. / Messing | Stahl / EN 1.4305 Äquiv. / EN 1.4301 Äquiv. / Messing | Stahl / EN 1.4305 Äquiv. / EN 1.4301 Äquiv. / Messing | Stahl / EN 1.4305 Äquiv. / EN 1.4301 Äquiv. / Messing | Stahl | Stahl | Stahl | Stahl / EN 1.4305 Äquiv. / EN 1.4301 Äquiv. / Messing | Stahl / EN 1.4305 Äquiv. / EN 1.4301 Äquiv. / Messing | Stahl / EN 1.4305 Äquiv. / EN 1.4301 Äquiv. / Messing | Stahl | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. / Messing | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. / Messing | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. / Messing | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. / Messing | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. / Messing | EN 1.4305 Äquiv. / EN 1.4301 Äquiv. / Messing | Stahl | Stahl | Stahl | Stahl |
| Dichtungswerkstoff | Nitrilkautschuk | Fluorkautschuk | Nitrilkautschuk | Nitrilkautschuk | Nitrilkautschuk | - | - | - | - | Fluorkautschuk | Fluorkautschuk | Fluorkautschuk | Fluorkautschuk | - | - | - | Fluorkautschuk | Fluorkautschuk | Nitrilkautschuk | Nitrilkautschuk | Nitrilkautschuk | - | Nitrilkautschuk | - | - | - | - | Nitrilkautschuk | Fluorkautschuk | Fluorkautschuk | Fluorkautschuk | - | - | - | Nitrilkautschuk | Nitrilkautschuk | Nitrilkautschuk | Nitrilkautschuk |
| Zulässige Flüssigkeit | Luft | Öl / Schutzgas / Aktivgas | Luft | Luft | Luft | Luft | Luft | Luft | Luft | Öl / Schutzgas / Aktivgas | Wasser | Wasser | Wasser | Wasser | Wasser | Wasser | Wasser / Wasserdampf / Öl / Chemikalien | Wasser / Wasserdampf / Öl / Chemikalien | Wasser / Luft / Öl | Wasser / Luft / Öl | Wasser / Luft / Öl | Luft / Öl | Luft / Öl | Luft / Öl | Wasser / Luft / Öl | Wasser / Luft / Öl | Wasser / Luft / Öl | Luft / Öl | Wasser / Wasserdampf / Öl / Chemikalien | Wasser / Wasserdampf / Öl / Chemikalien | Wasser / Wasserdampf / Öl / Chemikalien | Wasser / Wasserdampf / Öl / Chemikalien | Wasser / Wasserdampf / Öl / Chemikalien | Wasser / Wasserdampf / Öl / Chemikalien | Luft | Luft | Luft | Luft |
| Ventilstruktur | Einzeldurchgang Öffnungs-/Schließausführung | Doppeldurchgang Öffnungs-/Schließsystem | Einzeldurchgang Öffnungs-/Schließausführung | Einzeldurchgang Öffnungs-/Schließausführung | Einzeldurchgang Öffnungs-/Schließausführung | Einzeldurchgang Öffnungs-/Schließausführung | Einzeldurchgang Öffnungs-/Schließausführung | Einzeldurchgang Öffnungs-/Schließausführung | Einzeldurchgang Öffnungs-/Schließausführung | Doppeldurchgang Öffnungs-/Schließsystem | - | - | - | - | - | - | Doppeldurchgang Öffnungs-/Schließsystem | Doppeldurchgang Öffnungs-/Schließsystem | Einzeldurchgang Öffnungs-/Schließausführung | Einzeldurchgang Öffnungs-/Schließausführung | Einzeldurchgang Öffnungs-/Schließausführung | Einzeldurchgang Öffnungs-/Schließausführung | Einzeldurchgang Öffnungs-/Schließausführung | Einzeldurchgang Öffnungs-/Schließausführung | Einzeldurchgang Öffnungs-/Schließausführung | Einzeldurchgang Öffnungs-/Schließausführung | Einzeldurchgang Öffnungs-/Schließausführung | Einzeldurchgang Öffnungs-/Schließausführung | Doppeldurchgang Öffnungssystem | Doppeldurchgang Öffnungssystem | Doppeldurchgang Öffnungssystem | Doppeldurchgang Öffnungssystem | Doppeldurchgang Öffnungssystem | Doppeldurchgang Öffnungssystem | Einzeldurchgang Öffnungs-/Schließausführung | Einzeldurchgang Öffnungs-/Schließausführung | Einzeldurchgang Öffnungs-/Schließausführung | Einzeldurchgang Öffnungs-/Schließausführung |
| Betriebsumgebung, Anwendungen | Standard | Standard / Industriemaschinen | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Industriemaschinen | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Werksleitungen / Physiochemische Vorrichtungen | Standard / Werksleitungen / Physiochemische Vorrichtungen | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard / Werksleitungen / Physiochemische Vorrichtungen | Standard / Werksleitungen / Physiochemische Vorrichtungen | Standard / Werksleitungen / Physiochemische Vorrichtungen | Standard / Werksleitungen / Physiochemische Vorrichtungen | Standard / Werksleitungen / Physiochemische Vorrichtungen | Standard / Werksleitungen / Physiochemische Vorrichtungen | Standard | Standard | Standard | Standard |
Loading...
Filtern nach:
Stock
-
- Stock Items Included
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Ausführung
-
Standard
-
Anschlussstutzen
-
Mehrfach
-
Verdrillung
-
Drehung
-
Schwenkbar
-
Standard
-
Verbindertyp
-
Mit Gewinde
-
Mit Gewindebohrung
-
Mit Schnellkupplung
-
Für Schlauchhalterung
-
Für Rohrmontage
-
Mutter Anzug
-
Sonstige
-
Mit Gewinde
-
Stecker/Buchse
-
Stecker (Außengewinde)
-
Buchse (weiblich)
-
Stecker/Buchse, Satz
-
Abzweig mit Innen- und Außengewinde
-
Stecker (Außengewinde)
-
Haupteinheits-Material
- Stahl
- EN 1.4305 Äquiv. / EN 1.4301 Äquiv.
- Rostfreier Stahl (EN 1.4401 Äquiv.)
- Messing
- Aluminium
- Kunststoff
- Spezialstahl
- EN 1.4408 Äquiv.
- Bronze
-
Dichtungswerkstoff
- Nitrilkautschuk
- Fluorkautschuk
- EPDM
- Nicht im Lieferumfang
-
Zulässige Flüssigkeit
- Wasser
- Luft
- Wasserdampf
- Öl
- Chemikalien
- Schutzgas
- Gase für Schneidegeräte
- Aktivgas
- Pulver
-
Ventilstruktur
- Doppeldurchgang Öffnungs-/Schließsystem
- Klappbare Zweikanal-Ausführung (Luftlose Ausführung)
- Einzeldurchgang Öffnungs-/Schließausführung
- Doppeldurchgang Öffnungssystem
-
Betriebsumgebung, Anwendungen
- Standard
- Vakuum-
- Werksleitungen
- Industriemaschinen
- Halbleiterherstellung, Ausrüstung
- Physiochemische Vorrichtungen
- Medizinische Geräte
- Besondere hygienische Anforderungen
Suchergebnisse durch Herstellerauswahl einschränken
-
- MISUMI (55)
- NEW-MACHINE (47)
- YOSHIDA MFG (38)
- NAGAHORI INDUSTRY (36)
- CHIYODA TSUSHO (29)
- JOPLAX (26)
- SMC (22)
- OZAWA (21)
- NIHON PISCO (20)
- NITTA (17)
- CONSUSS (9)
- IFIELD (9)
- JUNKOSHA (4)
- BRIDGESTONE (3)
- YOKOHAMA RUBBER (2)
- OHTSUKA (1)
- FAG (0)
- TRUSCO NAKAYAMA (0)
- ESCO (0)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Kupplungen / Schnellkupplungen
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.