XAL series carbide square end mill, 2-flute / 3D Flute Length model
Klicken Sie auf dieses Bild, um es zu vergrößern.
Klicken Sie auf dieses Bild, um es zu vergrößern.
- Mengenrabatt
- XAL
- General Steel
- 2 Flutes
Teilenummer
Hier finden Sie die Teilenummern
zu dem gesuchten Artikel
| Teilenummer |
Standard-Stückpreis
| Mindestbestellmenge | Mengenrabatt | Outer Diameter (D) (φ) | Work Material | Flute Length (ℓ) (mm) | Shank Diameter (d) (mm) | Overall Length (L) (mm) | Processing Applications | Geometry | Figure | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
12.01 € | 1 | Verfügbar | 5 Arbeitstage | 0.3 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[◎] / Copper Alloy[◎] | 0.9 | 3 | 40 | Flat Surface / Side Surface / Nut / Inclined Cutting | Mit Führung | 1 | |
9.26 € | 1 | Verfügbar | 5 Arbeitstage | 0.5 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[◎] / Copper Alloy[◎] | 1.5 | 3 | 40 | Flat Surface / Side Surface / Nut / Inclined Cutting | Mit Führung | 1 | |
10.51 € | 1 | Verfügbar | 5 Arbeitstage | 0.6 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[◎] / Copper Alloy[◎] | 1.8 | 3 | 40 | Flat Surface / Side Surface / Nut / Inclined Cutting | Mit Führung | 1 | |
9.26 € | 1 | Verfügbar | 5 Arbeitstage | 0.8 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[◎] / Copper Alloy[◎] | 2.4 | 3 | 40 | Flat Surface / Side Surface / Nut / Inclined Cutting | Mit Führung | 1 | |
8.06 € | 1 | Verfügbar | 5 Arbeitstage | 1 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[◎] / Copper Alloy[◎] | 3 | 4 | 45 | Flat Surface / Side Surface / Nut / Inclined Cutting | Mit Führung | 1 | |
8.06 € | 1 | Verfügbar | 5 Arbeitstage | 1.5 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[◎] / Copper Alloy[◎] | 4.5 | 4 | 45 | Flat Surface / Side Surface / Nut / Inclined Cutting | Mit Führung | 1 | |
8.06 € | 1 | Verfügbar | 5 Arbeitstage | 2 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[◎] / Copper Alloy[◎] | 6 | 4 | 45 | Flat Surface / Side Surface / Nut / Inclined Cutting | Mit Führung | 1 | |
9.75 € | 1 | Verfügbar | 5 Arbeitstage | 3 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[◎] / Copper Alloy[◎] | 9 | 6 | 45 | Flat Surface / Side Surface / Nut / Inclined Cutting | Mit Führung | 1 | |
15.29 € | 1 | Verfügbar | 5 Arbeitstage | 3.5 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[◎] / Copper Alloy[◎] | 10.5 | 6 | 45 | Flat Surface / Side Surface / Nut / Inclined Cutting | Mit Führung | 1 | |
9.75 € | 1 | Verfügbar | 5 Arbeitstage | 4 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[◎] / Copper Alloy[◎] | 12 | 6 | 50 | Flat Surface / Side Surface / Nut / Inclined Cutting | Mit Führung | 1 | |
10.46 € | 1 | Verfügbar | 5 Arbeitstage | 5 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[◎] / Copper Alloy[◎] | 15 | 6 | 55 | Flat Surface / Side Surface / Nut / Inclined Cutting | Mit Führung | 1 | |
10.46 € | 1 | Verfügbar | 5 Arbeitstage | 6 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[◎] / Copper Alloy[◎] | 18 | 6 | 60 | Flat Surface / Side Surface / Nut / Inclined Cutting | Mit Führung | 2 | |
25.75 € | 1 | Verfügbar | 5 Arbeitstage | 7 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[◎] / Copper Alloy[◎] | 21 | 8 | 60 | Flat Surface / Side Surface / Nut / Inclined Cutting | Mit Führung | 1 | |
20.11 € | 1 | Verfügbar | 5 Arbeitstage | 8 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[◎] / Copper Alloy[◎] | 24 | 8 | 70 | Flat Surface / Side Surface / Nut / Inclined Cutting | Mit Führung | 2 | |
29.52 € | 1 | Verfügbar | 5 Arbeitstage | 10 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[◎] / Copper Alloy[◎] | 30 | 10 | 80 | Flat Surface / Side Surface / Nut / Inclined Cutting | Mit Führung | 2 | |
42.68 € | 1 | Verfügbar | 5 Arbeitstage | 12 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[◎] / Copper Alloy[◎] | 36 | 12 | 85 | Flat Surface / Side Surface / Nut / Inclined Cutting | Mit Führung | 2 | |
63.17 € | 1 | Verfügbar | 5 Arbeitstage | 14 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[◎] / Copper Alloy[◎] | 42 | 12 | 80 | Flat Surface / Side Surface / Nut / Inclined Cutting | Mit Führung | 3 | |
84.76 € | 1 | Verfügbar | 5 Arbeitstage | 16 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[◎] / Copper Alloy[◎] | 48 | 16 | 110 | Flat Surface / Side Surface / Nut / Inclined Cutting | Mit Führung | 2 | |
133.81 € | 1 | Verfügbar | 5 Arbeitstage | 20 | General Steel[◎] / Heat-Treated Steel[◎] / Edelstahl[○] / Gusseisen[○] / Aluminum Alloy[◎] / Copper Alloy[◎] | 60 | 20 | 110 | Flat Surface / Side Surface / Nut / Inclined Cutting | Mit Führung | 2 |
Loading...
Spezifikationen
| Model Number | Shank Diameter d |
Flute Length ℓ |
Overall Length L |
Figure | Standards Y/N | |||
| Outer Diameter D |
Shank Diameter d |
|||||||
| Standard | Sharp Edge | |||||||
| XAL-EM2R (Standard) XAL-PEM2R (Sharp Edge) |
0.1 | — | 3 | 0.3 | 40 | 1 | No Standards | ● |
| 0.2 | — | 3 | 0.6 | 40 | 1 | No Standards | ● | |
| 0.3 | — | 3 | 0.9 | 40 | 1 | ● | ● | |
| 0.4 | — | 3 | 1.2 | 40 | 1 | No Standards | ● | |
| 0.5 | — | 3 | 1.5 | 40 | 1 | ● | ● | |
| 0.6 | — | 3 | 1.8 | 40 | 1 | ● | ● | |
| 0.7 | — | 3 | 2.1 | 40 | 1 | No Standards | ● | |
| 0.8 | — | 3 | 2.4 | 40 | 1 | ● | ● | |
| 0.9 | — | 4 | 2.7 | 45 | 1 | No Standards | ● | |
| 1 | — | 4 | 3 | 45 | 1 | ● | ● | |
| 1.1 | — | 4 | 3.3 | 45 | 1 | No Standards | ● | |
| 1.2 | — | 4 | 3.6 | 45 | 1 | No Standards | ● | |
| 1.3 | — | 4 | 3.9 | 45 | 1 | No Standards | ● | |
| 1.4 | — | 4 | 4.2 | 45 | 1 | No Standards | ● | |
| 1.5 | — | 4 | 4.5 | 45 | 1 | ● | ● | |
| 1.6 | — | 4 | 4.8 | 45 | 1 | No Standards | ● | |
| 1.7 | — | 4 | 5.1 | 45 | 1 | No Standards | ● | |
| 1.8 | — | 4 | 5.4 | 45 | 1 | No Standards | ● | |
| 1.9 | — | 4 | 5.7 | 45 | 1 | No Standards | ● | |
| 2 | — | 4 | 6 | 45 | 1 | ● | ● | |
| 2.1 | — | 4 | 6.3 | 45 | 1 | No Standards | ● | |
| 2.2 | — | 4 | 6.6 | 45 | 1 | No Standards | ● | |
| 2.3 | — | 4 | 6.9 | 45 | 1 | No Standards | ● | |
| 2.4 | — | 4 | 7.2 | 45 | 1 | No Standards | ● | |
| 2.5 | — | 4 | 7.5 | 45 | 1 | No Standards | ● | |
| 2.6 | — | 4 | 7.8 | 45 | 1 | No Standards | ● | |
| 2.7 | — | 4 | 8.1 | 45 | 1 | No Standards | ● | |
| 2.8 | — | 4 | 8.4 | 45 | 1 | No Standards | ● | |
| 2.9 | — | 4 | 8.7 | 45 | 1 | No Standards | ● | |
| 3 | 4 | 4 | 9 | 45 | 1 | No Standards | ● | |
| 3 | — | 6 | 9 | 45 | 1 | ● | ● | |
| 3.1 | — | 6 | 9.3 | 45 | 1 | No Standards | ● | |
| 3.2 | — | 6 | 9.6 | 45 | 1 | No Standards | ● | |
| 3.3 | — | 6 | 9.9 | 45 | 1 | No Standards | ● | |
[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
| Model Number | Shank Diameter d |
Flute Length ℓ |
Overall Length L |
Figure | Standards Y/N | |||
| Outer Diameter D |
Shank Diameter d |
|||||||
| Standard | Sharp Edge | |||||||
| XAL-EM2R (Standard) XAL-PEM2R (Sharp Edge) |
3.4 | — | 6 | 10.2 | 45 | 1 | No Standards | ● |
| 3.5 | — | 6 | 10.5 | 45 | 1 | ● | ● | |
| 3.6 | — | 6 | 10.8 | 45 | 1 | No Standards | ● | |
| 3.7 | — | 6 | 11.1 | 45 | 1 | No Standards | ● | |
| 3.8 | — | 6 | 11.4 | 45 | 1 | No Standards | ● | |
| 3.9 | — | 6 | 11.7 | 45 | 1 | No Standards | ● | |
| 4 | 4 | 4 | 12 | 50 | 2 | No Standards | ● | |
| 4 | — | 6 | 12 | 50 | 1 | ● | ● | |
| 4.1 | — | 6 | 12.3 | 50 | 1 | No Standards | ● | |
| 4.2 | — | 6 | 12.6 | 50 | 1 | No Standards | ● | |
| 4.3 | — | 6 | 12.9 | 50 | 1 | No Standards | ● | |
| 4.4 | — | 6 | 13.2 | 50 | 1 | No Standards | ● | |
| 4.5 | — | 6 | 13.5 | 50 | 1 | No Standards | ● | |
| 4.6 | — | 6 | 13.8 | 55 | 1 | No Standards | ● | |
| 4.7 | — | 6 | 14.1 | 55 | 1 | No Standards | ● | |
| 4.8 | — | 6 | 14.4 | 55 | 1 | No Standards | ● | |
| 4.9 | — | 6 | 14.7 | 55 | 1 | No Standards | ● | |
| 5 | — | 6 | 15 | 55 | 1 | ● | ● | |
| 5.1 | — | 6 | 15.3 | 55 | 1 | No Standards | ● | |
| 5.2 | — | 6 | 15.6 | 55 | 1 | No Standards | ● | |
| 5.3 | — | 6 | 15.9 | 55 | 1 | No Standards | ● | |
| 5.4 | — | 6 | 16.2 | 55 | 1 | No Standards | ● | |
| 5.5 | — | 6 | 16.5 | 55 | 1 | No Standards | ● | |
| 5.6 | — | 6 | 16.8 | 60 | 1 | No Standards | ● | |
| 5.7 | — | 6 | 17.1 | 60 | 1 | No Standards | ● | |
| 5.8 | — | 6 | 17.4 | 60 | 1 | No Standards | ● | |
| 5.9 | — | 6 | 17.7 | 60 | 1 | No Standards | ● | |
| 6 | — | 6 | 18 | 60 | 2 | ● | ● | |
| 6.5 | — | 8 | 19.5 | 60 | 1 | No Standards | ● | |
| 7 | — | 8 | 21 | 60 | 1 | ● | ● | |
| 7.5 | — | 8 | 22.5 | 70 | 1 | No Standards | ● | |
| 8 | — | 8 | 24 | 70 | 2 | ● | ● | |
| 8.5 | — | 10 | 25.5 | 70 | 1 | No Standards | ● | |
| 9 | — | 10 | 27 | 70 | 1 | No Standards | ● | |
| 9.5 | — | 10 | 28.5 | 75 | 1 | No Standards | ● | |
| 10 | — | 10 | 30 | 80 | 2 | ● | ● | |
| 11 | — | 12 | 33 | 85 | 1 | No Standards | ● | |
| 12 | — | 12 | 36 | 85 | 2 | ● | ● | |
| 14 | — | 12 | 42 | 80 | 3 | ● | No Standards | |
| 16 | — | 16 | 48 | 110 | 2 | ● | ● | |
| 18 | — | 16 | 54 | 110 | 3 | No Standards | ● | |
| 20 | — | 20 | 60 | 110 | 2 | ● | ● | |
[ ! ]For shank diameter (d) specifications listed in blue, specify both a outer diameter (D) and shank diameter (d).
Weitere Informationen
● An affordable set price that moves according to quantity from 3 pieces and up.
● The XAL coating with excellent lubricity delivers stable wear-resistant performance, especially when milling raw materials, giving improved shape accuracy to the machined objects.
● 2-flute end mill with a wide operating range. Use for a variety of applications.
[ ! ]The XAL coating does not have conductive properties. Cannot be used with conduction model tool setters.
Grundlegende Informationen
| Number of Flutes(sheet) | 2 | Model | Quadratisch | Coating | For General Steel (AlCrN etc.) |
|---|---|---|---|---|---|
| Torsion Angle (θ) | Standard Helix (30 to 40°) | Additional Classification | Stocked Product | Tolerance of OD(mm) | 0 ~ -0.02 |
| ● Inventory Product □ Manufacturer Product | ● |
Konfigurieren
Basiseigenschaften
-
Outer Diameter (D)(φ)
-
Work Material
- General Steel
- Heat-Treated Steel
- Edelstahl
- Gusseisen
- Aluminum Alloy
- Copper Alloy
- Kunststoff
-
Flute Length (ℓ)(mm)
- 0.3
- 0.6
- 0.9
- 1.2
- 1.5
- 1.8
- 2.1
- 2.4
- 2.7
- 3
- 3.3
- 3.6
- 3.9
- 4.2
- 4.5
- 4.8
- 5.1
- 5.4
- 5.7
- 6
- 6.3
- 6.6
- 6.9
- 7.2
- 7.5
- 7.8
- 8.1
- 8.4
- 8.7
- 9
- 9.3
- 9.6
- 9.9
- 10.2
- 10.5
- 10.8
- 11.1
- 11.4
- 11.7
- 12
- 12.3
- 12.6
- 12.9
- 13.2
- 13.5
- 13.8
- 14.1
- 14.4
- 14.7
- 15
- 15.3
- 15.6
- 15.9
- 16.2
- 16.5
- 16.8
- 17.1
- 17.4
- 17.7
- 18
- 19.5
- 21
- 22.5
- 24
- 25.5
- 27
- 28.5
- 30
- 33
- 36
- 42
- 48
- 54
- 60
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
-
Processing Applications
- Flat Surface
- Side Surface
- Nut
- Inclined Cutting
-
Ausführung
- XAL-EM2R
- XAL-PEM2R
-
Geometry
- Sharp Corner
- Mit Führung
Filtern nach vsl. Lieferzeit
-
- Alle Produkte
- 5 Tage oder weniger
Optionale Eigenschaften
- Die Spezifikationen und Maße einiger Teile sind evtl. nicht vollständig enthalten. Genaue Details siehe Herstellerkataloge .
Technischer Support
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.