ASAHI SEIKO Gehäuselager / Kugellager mit Gehäuse（Ausführung - Lagerblock：Leichtbauweise）
Suche durch Präzisierung der Kategorie der unteren Klasse
Eingeschränkte Suche durch Präzisierung Ausführung
-
Lagereinheit -
Lagersitz -
Lagereinheit mit Rahmen -
Sonstige
?* Informationen zur Lieferzeit und Preisen
-
Lagereinheit Serie Silver, Modell mit exzentrischem Rad und zylindrischem Loch UP-Modell
ASAHI SEIKO
[Features]
· Smaller and more lightweight than conventional insert bearing units.
· Also, the bearing box is marked with a center mark for easy positioning.- Mengenrabatt
ab∗ ： 13.88 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Lagereinheit Serie Silver, Modell mit exzentrischem Rad und zylindrischem Loch MUP-Modell
ASAHI SEIKO
The bearing, fixed eccentric wheel, and bearing box are all made of corrosion-resistant stainless steel, making the product suitable for use with machinery that doesn't handle rust well.
[Features]
· Logical steel center: The outer wheel's outer diameter is machined into a ball surface, fitting around the center of a bearing box machined in the same way. Because both of the spherical surfaces can be aligned, this ensures logical operation of the machinery and stops erratic shaft center behavior, preventing excessive force from being applied to the bearing due to complications.
· Supply method: Simply supply fresh grease at arbitrary intervals and ensure that the bearing internal workings are ejecting old grease to the exterior as much as possible to extend working life for both grease supplies and the bearing. The cast iron series comes standard with a supply method to ensure that it can be used in severe conditions for long periods of time with complete confidence.
· Excellent sealing equipment: The bearing is double-sealed with a steel plate slinger and a heat-resistant synthetic rubber seal. Friction is low and even if the shaft tilts the seal contact is unchanged. The result is an extremely effective seal that prevents both grease leaks and contamination of the interior by external trash and moisture. Can be used with confidence even extremely poor conditions.
· This insert bearing unit with a cover can be used with confidence in poor environmental conditions such as factories engaged in steel manufacturing, milling, cement making, and casting, and in machinery for aircraft, air conditioning, and public works. The advance receiving box for units with set screws and adapters included has a steel plate or cast iron cover mounted for dust prevention, and both the bearing and the bearing box are processed with sealing equipment to improve dust-proof properties.
· Deep groove shaped internal structure: The bearing interior is identical to the deep groove ball bearing structure of the 6200 and 6300 shape. For this reason, it can support both radial and axial loads and is low noise.
· Bearing and bearing box compatibility: Because the bearing and bearing box have mutual compatibility, the bearing can be replaced on its own as necessary, which is extremely convenient.
· Easy handling: The insert bearing unit is an integrated combination of a bearing and bearing box. The bearing is preloaded with an appropriate amount of high quality lubricant grease, so it can be operating immediately as is after mounting. For this reason, there is no concern of contaminants and other materials entering the bearing during handling, preventing trouble during mounting before it occurs.
· Simple mounting to the shaft: The insert bearing unit can be mounted to the shaft on the side of the inner ring with the two included hex socket head set screws, to the inner ring using the included mounting adapter for the tapered hole in the inner diameter, or mounted with the included eccentric wheel. All of these methods are simple procedures, and the shaft machining is easy.ab∗ ： 43.11 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Ausführung |
| Ausführung - Lagereinheit |
| [d] Durchmesser - Wellenbohrung(mm) |
| Werkstoff - Lagergehäuse |
| Form - Lagerinnendurchmesser |
| Ausführung - Lagerblock |
| Werkstoff - Lagerkugeln |
| Oberflächenbehandlung |
|
| |
| Warenzeichen | ASAHI SEIKO | ASAHI SEIKO |
| Artikelserie | Lagereinheit Serie Silver, Modell mit exzentrischem Rad und zylindrischem Loch UP-Modell | Lagereinheit Serie Silver, Modell mit exzentrischem Rad und zylindrischem Loch MUP-Modell |
| ab∗ | 13.88 € *Stückpreis Standardkonfiguration Mengenrabatt | 43.11 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit ： | Versand am selben Tag | Versand am selben Tag |
| Ausführung | Lagereinheit | Lagereinheit |
| Ausführung - Lagereinheit | Stehlager | Stehlager |
| [d] Durchmesser - Wellenbohrung(mm) | 10 ～ 30 | 10 ～ 30 |
| Werkstoff - Lagergehäuse | Sonstige | Sonstige |
| Form - Lagerinnendurchmesser | Zylinderbohrung - Exzenterhülse | Zylinderbohrung - Exzenterhülse |
| Ausführung - Lagerblock | Leichtbauweise | Leichtbauweise |
| Werkstoff - Lagerkugeln | Rostfreier Stahl | Rostfreier Stahl |
| Oberflächenbehandlung | Unbehandelt | Unbehandelt |
Loading...
Filtern nach:
Stock
-
- Stock Items Included
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Ausführung - Lagereinheit
-
Stehlager -
Quadratflansch -
Rundflansch -
Abgeflachter Rundflansch -
Spannlager -
Spezialflansch -
Sonstige
-
-
[d] Durchmesser - Wellenbohrung(mm)
- 6
- 8
- 10
- 12
- 12.7
- 15
- 15,875
- 15.875
- 16
- 17
- 19,05 - 30
- 19.05
- 20
- 22,225 - 35
- 22.225
- 25
- 25.4
- 28,575 - 40
- 28.575
- 30
- 30.163
- 31,75 - 50
- 31.75
- 34.925
- 35
- 36,513 - 45
- 36,513 - 55
- 38.1
- 40
- 41,275 - 60
- 41.275
- 44.45
- 45
- 47,625 - 65
- 47.625
- 49.213
- 50
- 50.8
- 53,975 - 75
- 55
- 55,563 - 80
- 60
- 61,913 - 90
- 63.5
- 65
- 68.263
- 70
- 74,613 - 85
- 74,613 - 100
- 74.6131
- 75
- 79,375 - 90
- 80
- 85
- 87,313 - 120
- 90
- 95
- 100
- 105
- 110
- 115
- 120
- 125
- 130
- 140
- 160
-
Werkstoff - Lagergehäuse
-
Form - Lagerinnendurchmesser
-
Ausführung - Lagerblock
-
Werkstoff - Lagerkugeln
-
Oberflächenbehandlung
Suchergebnisse durch Herstellerauswahl einschränken
-
- MISUMI (1)
- ASAHI SEIKO (2)
- NIPPON PILLOW BLOCK (2)
- FSBEARING (1)
- NTN (1)
- KMT BEARINGS (0)
- TOHO (0)
- SANWA CONVEYOR (0)
- SNR (0)
- ZEN (0)
- NKE BEARINGS (0)
- TIMKEN (0)
- SKF (0)
- INA (0)
- FAG (0)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Eingeschränkte Suche durch Präzisierung der Lieferzeit
-
- Alle Produkte
- Versand am selben Tag
- 3 Tage oder weniger
- 4 Tage oder weniger
- 5 Tage oder weniger
- 6 Tage oder weniger
- 7 Tage oder weniger
- 8 Tage oder weniger
- 9 Tage oder weniger
- 10 Tage oder weniger
- 11 Tage oder weniger
Weitere Kategorien aus dem Produktbereich Gehäuselager / Kugellager mit Gehäuse
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.