DAIWARASHI Stellfüße / Gelenkfüße
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
Verstelleinrichtung mit Schraubenfeststeller, für schwere Gewichte D-C / D-C, S
DAIWARASHI
A standard type adjuster for heavy loads
[Features]
· The receiver is a forged item.
· Since it is a mold release surface that has undergone hot forging, unevenness does not stand out, unlike mold casting.
· D-C-S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.
· Since the receiver is forged, it features a load resistance of 10 tons or more. However, since the screw is buckled first, load resistance depends on the screw diameter.- Mengenrabatt
- 2D CAD Daten verfügbar
ab∗ ： 19.14 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Standard-Modell Einstellerbuchse D-A / D-B
DAIWARASHI
The most general standard type adjuster
[Features]
· The screw shaft rotates and tilts somewhat.
· A standard type that can be used as the adjustment bolt for any machinery.
· The affordable standard receiver type is recommended when using in large numbers, such as for the legs of a conveyor.
· D-A supports screw diameters M16 and M20, and D-B supports screw diameter M12.- Mengenrabatt
- 2D CAD Daten verfügbar
ab∗ ： 8.54 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Einsteller für Ankerbefestigung D-E II / D-E II-ST
DAIWARASHI
A standard item adjuster bolt for anchor fixing. Note: Please be advised that the model number in VONA has been changed from "D-E II" to "D-E2."
[Features]
· Similar to D-A, it is structured so that fixing of the receiver and bolt is performed by placing the bolt protrusion into the receiver and pressing a nut into it.
· Can easily be fixed using an anchor bolt.
· Please use an anchor bolt.
· Please use a 12 mm anchor bolt.
· Bolts shorter than 12 × 70 are not recommended for complete fixing due to safety concerns.
· Note: The screw rotates and tilts somewhat.- Mengenrabatt
- 2D CAD Daten verfügbar
ab∗ ： 17.43 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Einsteller mit Gummiunterseite für leichte Schwingungsdämpfung D-AⅢ / D-AⅢ / FR / D-AⅢ / SI / D-BⅢ / D-BⅢ / FR / D-BⅢ / SI
DAIWARASHI
An adjuster for light vibration-proofing equipped with rubber on the back side of the adjuster base. Note: Please be advised that the model number in VONA has been changed from "D-A III" to "D-A3."
[Features]
· Since the rubber part comes in contact with the floor, floor damage is prevented.
· A light vibration-proof type adjustment bolt.
· However, since the rubber hardness is 80°, repulsion is higher than low elasticity rubber and does not demonstrate much of a vibration-proofing effect. For this reason, please compare with other vibration-proof types such as the D-G series when using.
· Can easily be mounted using a screwdriver since a Phillips head slot has been provided on the bottom of the bolt.
· A nylon washer is used between the receiver and bolt, and rotation is smooth.
· The FR type uses non-migratory rubber so traces of rubber do not remain when moving the machinery.
· The SI type is white and is characterized by hardly leaving traces of rubber.
· Suitable for office equipment, etc.- Mengenrabatt
- 2D CAD Daten verfügbar
ab∗ ： 10.07 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Einstell Vorrichtung für schwere Last (Befestigung für Lager) D-H
DAIWARASHI
An adjuster for heavy weights with a built-in thrust bearing
[Features]
· Suitable for the adjustment of heavy machinery.
· Stability is outstanding since a large diameter bolt is used.
· Smooth adjustments can be made even for non-heavy machinery.- Mengenrabatt
- 2D CAD Daten verfügbar
ab∗ ： 86.24 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Einsteller mit Schraubbewegung-Verhinderer für Ankerbefestigung D-J-E II
DAIWARASHI
An adjuster for anchor fixing in which the horizontal shaking of the screw shaft part is completely locked. Note: Please be advised that the model number in VONA has been changed from "D-J-E II" to "D-J-E2."
[Features]
· The structure is such that some space exists between the receiver and bolt.
· This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
· It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
· It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
· Even when a running machine is stopped, the bolts will not move and falling over will not occur.- Mengenrabatt
- 2D CAD Daten verfügbar
ab∗ ： 31.43 € Minimum Lieferzeit ： 15 Arbeitstage *Stückpreis Standardkonfiguration
-
Einsteller mit Schraubenfeststeller, Standard-Buchsen Modell D-J-A
DAIWARASHI
A standard receiver type adjuster in which the horizontal shaking of the screw shaft part is completely locked.
[Features]
· The structure is such that some space exists between the receiver and bolt.
· This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
· It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
· It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
· Even when a running machine is stopped, the bolts will not move and falling over will not occur.- Mengenrabatt
- 2D CAD Daten verfügbar
ab∗ ： 14.95 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Einsteller für Schrägflächen für Anker-Befestigung D-U-E II
DAIWARASHI
An anchor fixing type adjuster for slopes in which the screw shaft part tilts even more. Note: Please be advised that the model number in VONA has been changed from "D-U-E II" to "D-U-E2."
[Features]
· The receiver part has a larger hole than the D-A type in order to enable it to receive the spherical structure of the upper part.
· The spherical structure is divided into a sphere and a receiver.
· The receiver has undergone spherical processing to enable the sphere to moves smoothly.
· M12/M16/M20 bolts can be used.
· The angle 35° is when using an M12 bolt, and when using M16/M20, since the hexagonal part contacts the spherical portion, it is limited to about 15°- Mengenrabatt
- 2D CAD Daten verfügbar
ab∗ ： 28.14 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Einsteller für schwere Gewichte mit Gummi D-C-R
DAIWARASHI
A rubber equipped type adjuster for medium loads
[Features]
· Receiver features a chloroprene rubber coating.- Mengenrabatt
- 2D CAD Daten verfügbar
ab∗ ： 21.00 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Verstelleinrichtungen für schwere Gewichte mit Gummi (Langschrauben Modell) D-C-L / D-C-L, S
DAIWARASHI
A long screw adjuster with a wide adjustment range
[Features]
· Although the dimensions in the table are in increments of 50 mm, dimensions can be cut as desired upon request.
A limited quantity of 500 mm total length products are available for M16 and M20.
· D-C-LS has a luxurious feel since the surface of the receiver is grind-processed with a lathe.- Mengenrabatt
- 2D CAD Daten verfügbar
ab∗ ： 31.59 € Minimum Lieferzeit ： 12 Arbeitstage *Stückpreis Standardkonfiguration
-
Einsteller für schwere Gewichte (Modell mit breitem Stecksockel) D-CⅢ / D-CⅢ / S / D-CⅢ-W
DAIWARASHI
A wide base type adjuster for heavy weights that is stable and that can distribute the load to the floor. Note: Please be advised that the model number in VONA has been changed from "D-C III" to "D-C3."
[Features]
· The receiver of the stainless steel D-C III is a forged item.
· D-C III S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.- Mengenrabatt
- 2D CAD Daten verfügbar
ab∗ ： 41.31 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Einsteller für schwere Gewichte mit Gummi (Drucklager-Befestigung) WD-C-R
DAIWARASHI
A rubber type adjuster for medium loads with a thrust bearing that enables smooth leveling
[Features]
· Receiver features a chloroprene rubber coating.- Mengenrabatt
- 2D CAD Daten verfügbar
ab∗ ： 49.08 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Einsteller für schwere Gewichte mit Gummi (Modell mit breitem Stecksockel) D-CⅢ-R
DAIWARASHI
A wide base type adjuster for medium loads with rubber. Note: Please be advised that the model number in VONA has been changed from "D-C III" to "D-C3."
[Features]
· The receiver features a chloroprene rubber coating and the rear side of the rubber has undergone groove processing to make it resistant to slipping.
· Has a larger outer diameter than D-C-R and feels more stable and heavy.- Mengenrabatt
- 2D CAD Daten verfügbar
ab∗ ： 37.47 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Standard-Einstellerbuchse Mit Kunststoff D-A II / D-B II
DAIWARASHI
A standard type adjuster with plastic that does not damage the floor. Note: Please be advised that the model number in VONA has been changed from "D-A II" to "D-A2."
[Features]
· Does not stain or damage floors since a special plastic is molded into the receiver.
· The plastic part has elasticity, feels good to touch, and features excellent aging resistance and temperature resistance.
· Suitable for any machinery or office equipment since the external appearance also features a beautiful finish.- Mengenrabatt
- 2D CAD Daten verfügbar
ab∗ ： 14.94 € Minimum Lieferzeit ： 12 Arbeitstage *Stückpreis Standardkonfiguration
-
Standard-Einstellerbuchse mit kleinem Durchmesser D-F / D-F-C
DAIWARASHI
An adjuster whose screw and base have small diameters
[Features]
· Similar to the D-A and D-B types, it is structured so that a nut is pressed into the bolt protrusion inside the receiver, eliminating worries regarding the receiver falling off.
· Manufactured to enable some play between the screw part and receiver, enabling its use on surfaces with a slight slope.
· A light load type with a receiver diameter that is also small.
· Thanks to the plastic coating on the outer circumference of the receiver, floors are not stained or damaged.- Mengenrabatt
- 2D CAD Daten verfügbar
ab∗ ： 5.60 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Einsteller für Wandflächen D-DⅠ
DAIWARASHI
A base cut type adjuster that does not protrude from the upper part and that prevents interference with other parts. Note: Please be advised that the model number in VONA has been changed from "D-D I" to "D-D1."
[Features]
· A special adjuster for walls.
· Please use together with D-D II.
· Please use accessories such as hex nuts, etc.
· The portion that makes contact with the wall is folded.
· As a result, the structure features a load resistance that is dramatically higher than products from other manufacturers in which the receiver is cut.
· In terms of its relation to the wall surface, the bolt hole has undergone special machining different from that of normal catch plates.
· Please refer to the drawings for use.- Mengenrabatt
- 2D CAD Daten verfügbar
ab∗ ： 23.22 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| CAD |
| ab∗ |
| Minimum Lieferzeit ： |
| Ausführung (Bauart) |
| Ausführung (Stellfuß) |
| Schwenkwinkel(°) |
| Ausführung (innen) |
| Handgriff mit Höhenverstellung |
| Werkstoff (Gewinde) |
| Oberflächenbehandlung (Gewinde) |
| Werkstoff (Korpus) |
| Oberflächebehnandlung (Korpus) |
| Werkstoff (elastisches Unterteil) |
| [L1] Länge (Gewinde)(mm) |
| [h] Höhe (Koprus)(mm) |
| [M] Durchmesser (nominal)(mm) |
| Eigenschaften |
| Ausführung (Schwenkfähigkeit) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI | DAIWARASHI |
| Artikelserie | Verstelleinrichtung mit Schraubenfeststeller, für schwere Gewichte D-C / D-C, S | Einstell Vorrichtung für schwere Last (Befestigung für Lager) D-H | Einsteller mit Schraubbewegung-Verhinderer für Ankerbefestigung D-J-E II | Einsteller mit Schraubenfeststeller, Standard-Buchsen Modell D-J-A | Verstelleinrichtungen für schwere Gewichte mit Gummi (Langschrauben Modell) D-C-L / D-C-L, S | Einsteller für schwere Gewichte (Modell mit breitem Stecksockel) D-CⅢ / D-CⅢ / S / D-CⅢ-W | Einsteller für schwere Gewichte mit Gummi (Drucklager-Befestigung) WD-C-R | Einsteller für schwere Gewichte mit Gummi (Modell mit breitem Stecksockel) D-CⅢ-R | Standard-Einstellerbuchse mit kleinem Durchmesser D-F / D-F-C | |||||||
| CAD |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ab∗ | 19.14 € *Stückpreis Standardkonfiguration Mengenrabatt | 8.54 € *Stückpreis Standardkonfiguration Mengenrabatt | 17.43 € *Stückpreis Standardkonfiguration Mengenrabatt | 10.07 € *Stückpreis Standardkonfiguration Mengenrabatt | 86.24 € *Stückpreis Standardkonfiguration Mengenrabatt | 31.43 € *Stückpreis Standardkonfiguration Mengenrabatt | 14.95 € *Stückpreis Standardkonfiguration Mengenrabatt | 28.14 € *Stückpreis Standardkonfiguration Mengenrabatt | 21.00 € *Stückpreis Standardkonfiguration Mengenrabatt | 31.59 € *Stückpreis Standardkonfiguration Mengenrabatt | 41.31 € *Stückpreis Standardkonfiguration Mengenrabatt | 49.08 € *Stückpreis Standardkonfiguration Mengenrabatt | 37.47 € *Stückpreis Standardkonfiguration Mengenrabatt | 14.94 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.60 € *Stückpreis Standardkonfiguration Mengenrabatt | 23.22 € *Stückpreis Standardkonfiguration Mengenrabatt |
| Minimum Lieferzeit ： | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 15 Arbeitstage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 12 Arbeitstage | Versand am selben Tag | Versand am selben Tag | Versand am selben Tag | 12 Arbeitstage | Versand am selben Tag | 5 Arbeitstage |
| Ausführung (Bauart) | Einstellschraube | Einstellschraube | Einstellschraube | Einstellschraube | Einstellschraube | Einstellschraube | Einstellschraube | Einstellschraube | Einstellschraube | Einstellschraube | Einstellschraube | Einstellschraube | Einstellschraube | Einstellschraube | Einstellschraube | Einstellschraube |
| Ausführung (Stellfuß) | Standard | Standard | Gummifuß mit Bodenanker | Gummifuß | Integriertes Lager | Gummifuß mit Bodenanker | Standard | Gummifuß mit Bodenanker | Gummifuß | Standard | Standard | Integriertes Lager | Gummifuß | Standard | Standard | Bodenanker |
| Schwenkwinkel(°) | - | - | - | - | - | - | - | 35 | - | - | - | - | - | - | - | - |
| Ausführung (innen) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Handgriff mit Höhenverstellung | Ohne | Ohne | Ohne | Ohne | Ohne | Ohne | Ohne | Ohne | Ohne | Ohne | Ohne | Ohne | Ohne | Ohne | Ohne | Ohne |
| Werkstoff (Gewinde) | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl | Rostfreier Stahl |
| Oberflächenbehandlung (Gewinde) | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige |
| Werkstoff (Korpus) | rostfreier Stahl | - | - | - | rostfreier Stahl | - | - | - | rostfreier Stahl | rostfreier Stahl | rostfreier Stahl | rostfreier Stahl | rostfreier Stahl | - | - | - |
| Oberflächebehnandlung (Korpus) | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige |
| Werkstoff (elastisches Unterteil) | - | - | - | Chloropren-Gummi / Ethylen-Propylen-Kautschuk / Silikon | - | - | - | - | Chloropren-Gummi | - | - | Chloropren-Gummi | Chloropren-Gummi | ABS-Kunststoff | ABS-Kunststoff | - |
| [L1] Länge (Gewinde)(mm) | 50 ～ 200 | 50 ～ 200 | 50 ～ 200 | 50 ～ 180 | 150 ～ 200 | 100 ～ 150 | 100 ～ 150 | 150 | 50 ～ 200 | 200 ～ 300 | 100 ～ 200 | 150 | 100 | 100 ～ 180 | 50 ～ 100 | 130 ～ 150 |
| [h] Höhe (Koprus)(mm) | 17 | 15 ～ 18 | 17 | 13 ～ 17 | 29.5 ～ 31.5 | 17 | 15 ～ 18 | 17 | 22 | 17 ～ 22 | 22 | 22 | 27 | 18 ～ 22 | 12.5 ～ 13.5 | 18 |
| [M] Durchmesser (nominal)(mm) | 12 ～ 20 | 12 ～ 20 | 12 ～ 16 | 8 ～ 20 | 20 ～ 24 | 12 ～ 16 | 12 ～ 16 | 12 | 12 ～ 20 | 12 ～ 24 | 16 ～ 24 | 20 | 16 | 12 ～ 16 | 8 ～ 10 | 16 |
| Eigenschaften | Standard / Korrosionsbeständig | Standard / Korrosionsbeständig | Standard / Korrosionsbeständig / Schwingungsdämpfend | Korrosionsbeständig / Schwingungsdämpfend | Standard / Korrosionsbeständig | Korrosionsbeständig / Schwingungsdämpfend | Standard / Korrosionsbeständig / Schwingungsdämpfend | Standard / Korrosionsbeständig | Standard / Korrosionsbeständig | Standard / Korrosionsbeständig | Standard / Korrosionsbeständig | Standard / Korrosionsbeständig | Standard / Korrosionsbeständig | Standard / Korrosionsbeständig | Standard / Korrosionsbeständig | Standard / Korrosionsbeständig |
| Ausführung (Schwenkfähigkeit) | starr | starr | starr | starr | starr | starr | starr | schwenkbar | starr | starr | starr | starr | starr | starr | starr | starr |
Loading...
Filtern nach:
Stock
-
- Stock Items Included
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Ausführung (Bauart)
- Einstellschraube
- Einstellschraube mit Kontermutter
- Block
- automatische Höhenverstellung
- Sonstige
- Einstellschraube mit Kautschuktüllen
-
Ausführung (Stellfuß)
-
Schwenkwinkel(°)
-
Ausführung (innen)
-
Handgriff mit Höhenverstellung
-
Werkstoff (Gewinde)
-
Oberflächenbehandlung (Gewinde)
-
Werkstoff (Korpus)
-
Oberflächebehnandlung (Korpus)
-
Werkstoff (elastisches Unterteil)
-
[L1] Länge (Gewinde)(mm)
- 11.5
- 11.6
- 14
- 15
- 16
- 17
- 17.5
- 18
- 19
- 19.5
- 20
- 21
- 22
- 23
- 24
- 25
- 25.5
- 26
- 26.5
- 27
- 28
- 29
- 29.5
- 30
- 31
- 31.5
- 32
- 34
- 35
- 36
- 36.5
- 38
- 39.5
- 40
- 41
- 43
- 43.5
- 44
- 45
- 45.5
- 46
- 48
- 49.5
- 50
- 51
- 52
- 54
- 55
- 58
- 59.5
- 60
- 61
- 62
- 63
- 63.5
- 64
- 65
- 65.5
- 66
- 67.5
- 68
- 69.5
- 70
- 71
- 72
- 73
- 75
- 78
- 79
- 80
- 85
- 90
- 91
- 93.5
- 94
- 95
- 95.5
- 96
- 98
- 99.5
- 100
- 103
- 103.5
- 104
- 108
- 110
- 114
- 117.5
- 120
- 122
- 124
- 125
- 126
- 127
- 129
- 130
- 132
- 132.5
- 135.5
- 136
- 138
- 142
- 143.5
- 144
- 145
- 148
- 150
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 162
- 162.5
- 165.5
- 168
- 170
- 172
- 174
- 175
- 176
- 177
- 179
- 180
- 182
- 182.5
- 184
- 185.5
- 186
- 198
- 200
- 206
- 207
- 209
- 210
- 212
- 212.5
- 215.5
- 220
- 225
- 250
- 280
- 300
-
[h] Höhe (Koprus)(mm)
- 4
- 5
- 5.4
- 6
- 7
- 8
- 8.5
- 9
- 9.5
- 9.7
- 9.8
- 10
- 10.5
- 11
- 11.2
- 12
- 12.5
- 13
- 13.5
- 13.7
- 14
- ~ 14
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 17.7
- 18
- ~ 18
- 18.5
- 19
- 20
- 20.5
- 20.7
- 21
- 21.5
- 22
- ~ 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 26
- ~ 26
- 27
- 28
- 28.2
- 29
- 29.5
- 30
- 30.5
- 31
- 31.5
- 32
- ~ 32
- 32.5
- 33
- 33.2
- 34
- 35
- 35.4
- 35.5
- 36.5
- 37
- 39
- 40
- 41
- 42
- ~ 42
- 42.5
- 44
- 44.5
- 45
- ~ 45
- 46
- 46.5
- 47
- 48.5
- 50
- 51
- 52
- 53
- 54
- 55
- 55.5
- 56
- 57
- 58
- 58~70
- 60
- 60.5
- 61
- 62
- 63
- 64
- 64.5
- 65
- 65~79
- 65.5
- 66
- 67
- 67.5
- 68
- 69
- 70
- 70.5
- 71
- 72
- 73
- 75
- 76
- 77
- 77.5
- 78
- 78.5
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 85.5
- 87
- 88
- 89
- 90
- 92
- 93
- 93.5
- 94
- 95
- 97
- 98
- 99
- 100
- 101
- 101.5
- 105
- 110
- 112
- 115
- 117.5
- 119
- 121
- 123
- 125
- 127
- 128
- 130
- 131
- 140
- 142
- 143
- 144
- 145
- 150
- 153
- 154
- 156
- 157
- 158
- 160
- 161
- 165
- 166
- 170
- 171
- 173
- 175
- 177
- 178
- 180
- 181
- 185
- 190
- 207
- 208
- 210
- 211
- 225
- 227
- 228
- 230
- 231
- 245
-
[M] Durchmesser (nominal)(mm)
-
Eigenschaften
- Standard
- Korrosionsbeständig
- Ölbeständig
- Chemikalienbeständig
- Wärmebeständig
- Schwingungsdämpfend
- Schlagfestigkeit
- El. Leitfähigkeit
-
Ausführung (Schwenkfähigkeit)
Suchergebnisse durch Herstellerauswahl einschränken
-
- MISUMI (0)
- DAIWARASHI (16)
- NABEYA (4)
- IMAO CORPORATION (2)
- RICH ENGINEERIN (0)
- EUROFLEX (0)
- GIFU SANKEN KOGYO (0)
- AMF (0)
- IWATA MFG (0)
- SUNCO (0)
- YAHATA NEJI (0)
- NANSIN (0)
- KURASHIKI KAKO (0)
- SUN FASTENER (0)
- HALDER (0)
- GANTER (0)
- OHNORUBBER (0)
- KIPP (0)
- TAKIGEN (0)
- ELESA (0)
- NBK (0)
- TRUSCO NAKAYAMA (0)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Stellfüße / Gelenkfüße
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.