HOZAN Schraubendreher（Tip standards：Senkkopf (-)）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
Auswechselbarer Keramik-Abgleichschraubendreher, D-280
HOZAN
· A perfect driver for adjusting pre-set knobs/capacitors on printed circuit boards.
[Features]
· Uses zirconia ceramic that does not cause coil misalignment.
· Has greater durability against wear and damage than alumina ceramics.
* Alumina ceramic: Fine ceramic. Besides abrasion resistance, it is excellent in heat and chemical resistance.
[Applications]
· Combination: D-280, -0.9 x -1.8 mm, blade thickness 0.4 mm (D-282), -1.3 x -2.6 mm, blade thickness 0.4 mm (D-283).ab∗ ： 58.70 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Schlagschrauber, D-963
HOZAN
Impact screwdriver that can be switched between left and right rotation.
[Features]
· Rusted screws can be loosened easily by hitting it with the hammer as the screwdriver bit rotates at high torque.
· It uses a flanged protective grip that protects the hand.
· Removing the bit holder allows a 12.7 mm square socket to be attached.
· Case included.
[Applications]
· Ideal for turning screws, etc. that take effort to loosen.ab∗ ： 3.70 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Schlitzschraubendreher, D-630 – D-655
HOZAN
[Features]
· Designed to deal with the screws in hard-to-reach places by reducing the outer diameter of the screwdriver shaft.
· Hole diameter is compatible with deep screws like those in household appliances because the shaft has a thinner finish than even JIS standards.
· Even when thin, "torsional strength" abides by JIS standards.
· The basic hardening treatment for shaft strength is thermal hardening treatment involving skilled full quenching.
· The polypropylene grip with pen clip has both strength and lightness.
· It uses electroless nickel plating that's thin and tough in order to maintain accuracy, providing surface processing that emphasizes accuracy and strength.
[Applications]
· Convenient for tightening and loosening screws.ab∗ ： 5.10 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
LED-Elektroschrauber, D-745
HOZAN
An LED type inspection screwdriver with high visibility.
[Features]
· Batteries can be changed.
· Applicable ranges: 100 to 240 VAC, tip size of 2.5 x 0.6 mm, total length of 139 mm, shaft length of 17 mm, shaft diameter of 2.5 mm.
· Handle diameter 16 mm, weight 23 g.
· Be sure to check the light before use.
· Be careful of short circuit and electric shock.
[Applications]
· Used for determining AC polarity and checking electrical conductance.
· Can be used within the applicable range.ab∗ ： 10.36 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
| |
| Warenzeichen | HOZAN | HOZAN | HOZAN | HOZAN |
| Artikelserie | ||||
| ab∗ | 58.70 € *Stückpreis Standardkonfiguration | 3.70 € *Stückpreis Standardkonfiguration | 5.10 € *Stückpreis Standardkonfiguration | 10.36 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit ： | 5 Arbeitstage | 7 Arbeitstage | Versand am selben Tag | 5 Arbeitstage |
| Tip standards | Senkkopf (-) | Senkkopf (-) | Senkkopf (-) | Senkkopf (-) |
| Tip size / Phillips (+) | - | - | - | - |
| Tip size / flathead (-) blade width (mm) B1 | 0.9 ～ 2.6 | 8 ～ 10 | 2.5 | 2.5 |
| Shaft length L (mm) | - | - | 100 | 17 |
| Single Product/Set Classification | Produktsatz | Einzelstück | Einzelstück | Einzelstück |
| Shaft type | Rund | - | Rund | Rund |
| Magnet | N/A | N/A | N/A | N/A |
| Shaft through | - | - | N/A | N/A |
| Bolster | - | - | N/A | N/A |
| Grip Type | Kunststoff | - | Kautschuk | Kunststoff |
| Tip size / flathead (-) blade thickness (mm) B2 | 0.4 | - | 0.35 | 0.6 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | - | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - |
Loading...
Filtern nach:
Stock
-
- Stock Items Included
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Tip standards
- Kreuzschlitz (+)
- Senkkopf (-)
- Kreuzschlitz (+)/Senkkopf (-)
- Torx
- Packung
- Sechskant
- Kugelkopf
- Kombination
- Sonstige
-
Tip size / Phillips (+)
- Nr. 000
- Nr. 00
- Nr. 0
- Nr. 1
- Nr. 2
- Nr. 3
- Nr. 4
- Sonstige
-
Tip size / flathead (-) blade width (mm) B1
-
Shaft length L (mm)
-
Single Product/Set Classification
- Einzelstück
- Produktsatz
-
Shaft type
- Rund
- Quadratisch
-
Magnet
- Verfügbar
- N/A
-
Shaft through
- Verfügbar
- N/A
-
Bolster
- im Lieferumfang enthalten
- N/A
-
Grip Type
- Kunststoff
- Holzgriff
- Kautschuk
- Edelstahl
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Suchergebnisse durch Herstellerauswahl einschränken
-
- MAEDAKINNZOKU (15)
- KTC(KYOTO TOOL) (7)
- ANEX (6)
- PB SWISS TOOLS (6)
- TRUSCO NAKAYAMA (6)
- HOZAN (4)
- ENGINEER (3)
- HIRAI KOGU (1)
- SIGNET (1)
- SK 11 (1)
- AS ONE (0)
- CUSTOM KOBO (0)
- HANDIWORK (0)
- MATADOR (0)
- PROXXON MICROMOT (0)
- RITTAL (0)
- WOLFCRAFT (0)
- E VALUE (0)
- SMATO (0)
- FACOM (0)
- EIGHT TOOL (0)
- OSG (0)
- SUEKAGE TOOL (0)
- TRAD (0)
- SUNFLAG (0)
- GEDORE (0)
- WEIDMÜLLER (0)
- HAZET (0)
- BAHCO (0)
- CIMCO (0)
- VESSEL (0)
- BERNSTEIN AG (0)
- WERA (0)
- WIHA (0)
- KNIPEX (0)
- PHOENIX CONTACT (0)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Schraubendreher
-
- Ratschenschlüssel / Ringschlüssel / Schraubenschlüssel
- Steckschlüssel
- Innensechskantschlüssel
- Sechsrund-Schlüssel (TX/E)
- Schraubendreher
- Bits für Schraubendreher / Schraubendrehereinsätze
- Blechbearbeitung
- Zangen / Kneifzangen / Pinzetten
- Universalschlüssel
- Werkzeuge für Wasserversorgungs-/Klimaleitungen
- Werkzeuge für Elektroanlagen
- Werkzeug-Sets/Werkzeugkästen
- Pinzetten, Klemmen, Zangen
- Fahrzeug-Wartungswerkzeuge
-
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.