Stellfüße / Gelenkfüße

?* Informationen zur Lieferzeit und Preisen

• 

  Standard-Modell Einstellerbuchse D-A / D-B

  DAIWARASHI

  The most general standard type adjuster
  
  [Features]
  · The screw shaft rotates and tilts somewhat.
  · A standard type that can be used as the adjustment bolt for any machinery.
  · The affordable standard receiver type is recommended when using in large numbers, such as for the legs of a conveyor.
  · D-A supports screw diameters M16 and M20, and D-B supports screw diameter M12.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	8.54 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Einsteller für Ankerbefestigung D-E II / D-E II-ST

  DAIWARASHI

  A standard item adjuster bolt for anchor fixing. Note: Please be advised that the model number in VONA has been changed from "D-E II" to "D-E2."
  
  [Features]
  · Similar to D-A, it is structured so that fixing of the receiver and bolt is performed by placing the bolt protrusion into the receiver and pressing a nut into it.
  · Can easily be fixed using an anchor bolt.
  · Please use an anchor bolt.
  · Please use a 12 mm anchor bolt.
  · Bolts shorter than 12 × 70 are not recommended for complete fixing due to safety concerns.
  · Note: The screw rotates and tilts somewhat.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	17.43 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Einsteller für Schrägflächen für Anker-Befestigung D-U-E II

  DAIWARASHI

  An anchor fixing type adjuster for slopes in which the screw shaft part tilts even more. Note: Please be advised that the model number in VONA has been changed from "D-U-E II" to "D-U-E2."
  
  [Features]
  · The receiver part has a larger hole than the D-A type in order to enable it to receive the spherical structure of the upper part.
  · The spherical structure is divided into a sphere and a receiver.
  · The receiver has undergone spherical processing to enable the sphere to moves smoothly.
  · M12/M16/M20 bolts can be used.
  · The angle 35° is when using an M12 bolt, and when using M16/M20, since the hexagonal part contacts the spherical portion, it is limited to about 15°

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	28.14 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Einsteller mit Gummiunterseite für leichte Schwingungsdämpfung D-AⅢ / D-AⅢ / FR / D-AⅢ / SI / D-BⅢ / D-BⅢ / FR / D-BⅢ / SI

  DAIWARASHI

  An adjuster for light vibration-proofing equipped with rubber on the back side of the adjuster base. Note: Please be advised that the model number in VONA has been changed from "D-A III" to "D-A3."
  
  [Features]
  · Since the rubber part comes in contact with the floor, floor damage is prevented.
  · A light vibration-proof type adjustment bolt.
  · However, since the rubber hardness is 80°, repulsion is higher than low elasticity rubber and does not demonstrate much of a vibration-proofing effect. For this reason, please compare with other vibration-proof types such as the D-G series when using.
  · Can easily be mounted using a screwdriver since a Phillips head slot has been provided on the bottom of the bolt.
  · A nylon washer is used between the receiver and bolt, and rotation is smooth.
  · The FR type uses non-migratory rubber so traces of rubber do not remain when moving the machinery.
  · The SI type is white and is characterized by hardly leaving traces of rubber.
  · Suitable for office equipment, etc.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	10.07 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Verstelleinrichtung mit Schraubenfeststeller, für schwere Gewichte D-C / D-C, S

  DAIWARASHI

  A standard type adjuster for heavy loads
  
  [Features]
  · The receiver is a forged item.
  · Since it is a mold release surface that has undergone hot forging, unevenness does not stand out, unlike mold casting.
  · D-C-S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.
  · Since the receiver is forged, it features a load resistance of 10 tons or more. However, since the screw is buckled first, load resistance depends on the screw diameter.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	19.14 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Einstell Vorrichtung für schwere Last (Befestigung für Lager) D-H

  DAIWARASHI

  An adjuster for heavy weights with a built-in thrust bearing
  
  [Features]
  · Suitable for the adjustment of heavy machinery.
  · Stability is outstanding since a large diameter bolt is used.
  · Smooth adjustments can be made even for non-heavy machinery.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	86.24 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Verstelleinrichtungen für schwere Gewichte mit Gummi (Langschrauben Modell) D-C-L / D-C-L, S

  DAIWARASHI

  A long screw adjuster with a wide adjustment range
  
  [Features]
  · Although the dimensions in the table are in increments of 50 mm, dimensions can be cut as desired upon request.
  A limited quantity of 500 mm total length products are available for M16 and M20.
  · D-C-LS has a luxurious feel since the surface of the receiver is grind-processed with a lathe.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	31.59 €
  Minimum Lieferzeit ：	12 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Einsteller mit Schraubbewegung-Verhinderer für Ankerbefestigung D-J-E II

  DAIWARASHI

  An adjuster for anchor fixing in which the horizontal shaking of the screw shaft part is completely locked. Note: Please be advised that the model number in VONA has been changed from "D-J-E II" to "D-J-E2."
  
  [Features]
  · The structure is such that some space exists between the receiver and bolt.
  · This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
  · It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
  · It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
  · Even when a running machine is stopped, the bolts will not move and falling over will not occur.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	31.43 €
  Minimum Lieferzeit ：	15 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Einsteller mit Schraubenfeststeller, Standard-Buchsen Modell D-J-A

  DAIWARASHI

  A standard receiver type adjuster in which the horizontal shaking of the screw shaft part is completely locked.
  
  [Features]
  · The structure is such that some space exists between the receiver and bolt.
  · This is the result of our efforts to enable bolts to move smoothly even if the floor surface is somewhat tilted.
  · It has been pointed out in the past that this may cause bolt looseness to occur when the upper portion of a conveyor vibrates, possibly resulting in significant machinery movement caused by shaking when the conveyor stops.
  · It is for this reason that we came up with the D-J type, which is suitable for use when the top portion of machinery such as a conveyor vibrates and moves slightly.
  · Even when a running machine is stopped, the bolts will not move and falling over will not occur.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	14.95 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Einsteller – Gummistecksockel D -G / D-G II

  DAIWARASHI

  An adjuster with a rubber-made base that is also optimal for slip prevention. Note: Please be advised that the model number in VONA has been changed from "D-G II" to "D-G2."
  
  [Features]
  · A rubber cover is used for the entire receiver, and an iron core is included inside.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	35.85 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Einsteller für schwere Gewichte mit Gummi D-C-R

  DAIWARASHI

  A rubber equipped type adjuster for medium loads
  
  [Features]
  · Receiver features a chloroprene rubber coating.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	21.00 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Einsteller für schwere Gewichte (Modell mit breitem Stecksockel) D-CⅢ / D-CⅢ / S / D-CⅢ-W

  DAIWARASHI

  A wide base type adjuster for heavy weights that is stable and that can distribute the load to the floor. Note: Please be advised that the model number in VONA has been changed from "D-C III" to "D-C3."
  
  [Features]
  · The receiver of the stainless steel D-C III is a forged item.
  · D-C III S has a luxurious feel since the surface of the receiver is grind-processed with a lathe.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	41.31 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Einsteller für schwere Gewichte mit Gummi (Drucklager-Befestigung) WD-C-R

  DAIWARASHI

  A rubber type adjuster for medium loads with a thrust bearing that enables smooth leveling
  
  [Features]
  · Receiver features a chloroprene rubber coating.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	49.08 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Einsteller für schwere Gewichte mit Gummi (Modell mit breitem Stecksockel) D-CⅢ-R

  DAIWARASHI

  A wide base type adjuster for medium loads with rubber. Note: Please be advised that the model number in VONA has been changed from "D-C III" to "D-C3."
  
  [Features]
  · The receiver features a chloroprene rubber coating and the rear side of the rubber has undergone groove processing to make it resistant to slipping.
  · Has a larger outer diameter than D-C-R and feels more stable and heavy.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	37.47 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Standard-Einstellerbuchse Mit Kunststoff D-A II / D-B II

  DAIWARASHI

  A standard type adjuster with plastic that does not damage the floor. Note: Please be advised that the model number in VONA has been changed from "D-A II" to "D-A2."
  
  [Features]
  · Does not stain or damage floors since a special plastic is molded into the receiver.
  · The plastic part has elasticity, feels good to touch, and features excellent aging resistance and temperature resistance.
  · Suitable for any machinery or office equipment since the external appearance also features a beautiful finish.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	14.94 €
  Minimum Lieferzeit ：	12 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Standard-Einstellerbuchse mit kleinem Durchmesser D-F / D-F-C

  DAIWARASHI

  An adjuster whose screw and base have small diameters
  
  [Features]
  · Similar to the D-A and D-B types, it is structured so that a nut is pressed into the bolt protrusion inside the receiver, eliminating worries regarding the receiver falling off.
  · Manufactured to enable some play between the screw part and receiver, enabling its use on surfaces with a slight slope.
  · A light load type with a receiver diameter that is also small.
  · Thanks to the plastic coating on the outer circumference of the receiver, floors are not stained or damaged.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	5.60 €
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Einsteller für Wandflächen D-DⅠ

  DAIWARASHI

  A base cut type adjuster that does not protrude from the upper part and that prevents interference with other parts. Note: Please be advised that the model number in VONA has been changed from "D-D I" to "D-D1."
  
  [Features]
  · A special adjuster for walls.
  · Please use together with D-D II.
  · Please use accessories such as hex nuts, etc.
  · The portion that makes contact with the wall is folded.
  · As a result, the structure features a load resistance that is dramatically higher than products from other manufacturers in which the receiver is cut.
  · In terms of its relation to the wall surface, the bolt hole has undergone special machining different from that of normal catch plates.
  · Please refer to the drawings for use.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	23.22 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Nivellierung (KA)

  IMAO CORPORATION

  [Merkmale] Der Rostfreier Stahl-Typ hat eine ausgezeichnete Korrosions- und Wasserbeständigkeit. Zugelassene Last: 3 kN, 5 kN.

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	7.78 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Nivellierung (Ankerausführung) (KAF)

  IMAO CORPORATION

  [Merkmale] Der Rostfreier Stahl-Typ hat eine ausgezeichnete Korrosionsbeständigkeit und Wasserbeständigkeit. Zugelassene Last: 5 kN.

  • Mengenrabatt

  Zum Vergleich auswählen

  › Jetzt konfigurieren
  ab∗ ：	18.71 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...