Signalsäulen（Color (top stage)：Blau）

?* Informationen zur Lieferzeit und Preisen

• 

  LED-beschichtete Signallampe mit elektronischem Alarm

  PATLITE

  A speech synthesis type / electronic audio alarm device with a built-in high-volume horn. Features LED stack lights that are clearly visible from a distance. Features 32 built-in alarm sounds and melodies (the LKEH-FV type has no built-in audio functionality).
  
  [Features]
  The head cover uses an alloy resin with excellent oil resistance (oil mist environments also taken into consideration).
  · The body is made using AES resin giving excellent weather resistance.
  · The lighting unit is made using polycarbonate resin, which helps protect against impact/shock.
  · The surface of the lighting unit is flat, helping prevent dust from accumulating.
  · The new reflective mirror design improves visibility from both the top and bottom.
  · The optimized horn-shaped design deliver a volume of 105dB (at 1 m).
  · The volume, selection switches, and SD card slot are found on the front of the unit, enabling easy changing of settings, even post-installation.
  · Operate the selection switch to play the test sounds which can then be used to check operations and for when adjusting the volume.
  · The volume can be reduced by approximately 20dB via the noise-reduction input. The combination of a timer and sensor allow noise reduction for use during nighttime.
  · Features compatibility with NPN transistor open collectors, enabling direct drive with a PLC etc.
  · UL-compatible types are also available.
  · Boasts IP53 protective characteristics, enabling use in factories with high volumes of moisture and dust.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	557.52 €
  Minimum Lieferzeit ：	23 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Extrem schlanke LED-Säulen-Signalleuchte

  PATLITE

  An ultra-slim types with an aluminum body. Ideal for small equipment, etc.
  
  [Features]
  · The modular structure makes changing and expanding of the color array easy.
  · The wiring is determined by the color of the unit. As such, there is no need to alter the wiring, even if the color array changes.
  · The color array can be easily recombined and expanded, even after mounting to equipment.
  · The prism cut globes scatter the light with a high level of brightness, helping improve visibility.
  · The body is made from aluminum, helping protect against rust. Maintain its appearance, even after many hours of use.
  · The screws for mounting the main body are parallel screw size types for pipes/tubes, enabling direct connection with flexible wire conduits, etc.
  · A modular structure in which the wiring is determined by the color of the unit.
  · No need to alter the wiring, even if the color array changes.
  · The color array can be easily recombined, even after mounting to equipment.
  · Features compatibility with NPN transistor open collectors, enabling direct drive with a PLC etc.
  · CE marking compliant (conforms to EN / IEC standards).
  · UL standards compliant (UL508 / File no. E215660).

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	95.02 €
  Minimum Lieferzeit ：	13 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Extrem dünne LED-Signalsäule MP-A

  PATLITE

  An ultra-slim types with a lightweight resin body. Ideal for small equipment, etc.
  
  [Features]
  · The modular structure makes changing and expanding of the color array easy.
  · The wiring is determined by the color of the unit. As such, there is no need to alter the wiring, even if the color array changes.
  · The color array can be easily recombined and expanded, even after mounting to equipment.
  · The prism structure and lens cut globes scatter the light with a high level of brightness, helping improve visibility.
  · The body is made from lightweight ABS resin. Maintains its appearance, even after man hours of use.
  · The screw parts used for mounting the main body are metric size types (M22 × 1.5).
  · A dust-proof and jet-proof IP65 structure that can even be used in factories with large amounts of moisture and dust. <
  br>· Compatible with open collectors and can be driven directly using a PLC, etc.
  · CE marking compliant (conforms to EN / IEC standards).
  · UL standards compliant (UL508 / File no. E215660).

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	89.68 €
  Minimum Lieferzeit ：	13 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...