Schalttafeln / Schaltschränke / Schaltkästen（Schutzfunktion (umweltbeständig)：NA Seite 2）

?* Informationen zur Lieferzeit und Preisen

• 

  Flammhemmendes Kunststoffgehäuse, Serie SW-N

  TAKACHI ELECTRONICS ENCLOSURE

  Flame Retardant Plastic Case, (SW-N)
  
  [Features]
  · A one-touch opening and closing structure.
  · The internal space is large and useful.
  · A small, multi-purpose case.
  ▪ ABS plastic SW series is available in two colors, namely S (light gray), and B (black), and 17 models, while the flame retardant ABS plastic SW-N series is available in G (gray) and 13 models, and the heat resistant ABS plastic SW-T series is available in B (black) and 6 models.
  · There is also a full line-up of optional parts such as printed circuit boards that fit the case perfectly and parts for board mounting (optional components, sold separately).
  - For that shield type ESW series, refer to 1-111P~112P.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	2.27 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flaches Gehäuse, Serie YM

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Thin case (YM)

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	8.42 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Abgeschrägter Schaltkasten, Serie CF

  TAKACHI ELECTRONICS ENCLOSURE

  Sloped Control Box (CF)
  
  [Features]
  - The clean design features a 10° slope which makes operation easy.
  - The panel structure includes both screw clamp and inlay options, either of which can be used as the front.
  · Machining is easy because of the flat plate.
  - The product is extremely lightweight, with the side plates employing flame retardant ABS resin (UL94V-0) and the frame employing extruded aluminum.
  - The product can be mounted in any position due to the sticky rubber legs.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	25.91 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Modulkasten zum Öffnen und Schließen für DIN-Schienen-Montage, Serie H53

  TAKACHI ELECTRONICS ENCLOSURE

  Opening and Closing Window DIN Module Box
  
  [Features]
  - This box is designed specifically for DIN rail (35-mm) mounting.
  - Assembly and disassembly is possible without the use of screws.
  - Three different front panel types can be selected, depending on the intended application.
  - Attachment of a mounting base or printed baseboard to the inside is possible.
  Neither a mounting base nor printed baseboard are included.
  - PPO material conforming to UL94V-0 standards is included.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	17.46 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Einschubgehäuse mit JIS-Griff, Serie JRH

  TAKACHI ELECTRONICS ENCLOSURE

  Rack case with JIS handle (JRH)
  
  [Features]
  · The JRH series is a series of rack cases available in 42 sizes (6 heights and 7 depths).
  · Sectional JIS standard rack case of panel construction that makes machining, silk printing, and carving easy to perform.
  · There are 2 types of cases, one is silver (S type) and the other is black (B type).

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	111.47 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Systemgehäuse mit Stützgriff, Serie MON

  TAKACHI ELECTRONICS ENCLOSURE

  System Case with Step Handle (MON)
  
  [Features]
  · This Series of aluminum cases with step handles includes a total of 528 models in 176 sizes, including 8 different heights, 6 different widths and 5 different depths.
  · All-aluminum and lightweight, making it ideal for equipment such as portable measuring instruments.
  · The step handle locks at 30° intervals.
  · The step handle can withstand a load of 25 kg.
  · Accessory screws: M4 × 6, countersunk head trivalent chromate × 4.
  · M4 × 8 pan trivalent chromate × 8.
  · M4 × 10 bind trivalent black chromate × 4.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	89.35 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoffkasten mit abnehmbarer oberer Abdeckung, Serie PR

  TAKACHI ELECTRONICS ENCLOSURE

  Removable Top Cover Plastic Box (PR)
  
  [Features]
  · Extremely cleanly-designed plastic box with tapered corners.
  · Top cover detachable even when attached to a wall, making maintenance simple.
  · Use on desks with the top cover surface facing down.
  · The cover mounting screws are secured using insert nuts enabling repeated opening/closing and providing a sturdy structure.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	7.77 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Gehäuse im Taschenformat, Serie PT

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  ∙ Case for mobile phone. (PT)

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	76.60 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoffgehäuse, Serie SY

  TAKACHI ELECTRONICS ENCLOSURE

  Plastic Case (SY)
  
  [Features]
  - Flat-plate panels make machining easy.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	13.37 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Abgeschrägtes Gehäuse, Serie TS

  TAKACHI ELECTRONICS ENCLOSURE

  Sloped Case (TS)
  
  [Features]
  · Chassis employs SPCCt1.0 black paint for TS-4 only.
  · Included screws correspond to M3 × 6 binding screws.
  · Cover / chassis one-sided protective sheet included (however, no protective sheet is included for the TS-4).

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	24.45 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Anschlussplatten-Einschubgehäuse für EIA-Racks, Serie UT

  TAKACHI ELECTRONICS ENCLOSURE

  EIA Rack Terminal Board Unit (UT)
  
  [Features]
  - A multipurpose terminal board unit.
  - By combining it with the optional panel and mounting it, you can build a unit to fit the application.
  - The panel/unit panel mounting bar has a 50 mm pitch and is movable, which lets you change the depth.
  · Has a simple structure and the front panel can be removed while stowed on a rack.
  - Panels and sideboards feature two colors: beige and black.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	109.92 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Einschubgehäuse mit EIA-Griff, Serie ERH

  TAKACHI ELECTRONICS ENCLOSURE

  Rack Case with EIA Handle
  
  [Features]
  · The ERH series features a total of 35 differently sized cases, with 5 different heights and 7 different depths available.
  · Sectional EIA standard rack case with panel structure that makes machining, silk printing, and carving easy to perform.
  · There are two types of cases available: one is silver (S series) and the other is black (B series).

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	113.80 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Wärmeableitungsgehäuse, Serie HEN

  TAKACHI ELECTRONICS ENCLOSURE

  Heat Dissipation Case (HEN)
  
  [Features]
  · Surface treatment offers hair line processing with a luxurious feel and superior design characteristics
  · Natural air-cooled case with heat sink shape that accommodates heating countermeasures.
  · A total of 36 models in 18 sizes are available, including 6 different heights, 1 width and 3 different depths.
  · A very sturdy case made of aluminum extruded material.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	39.70 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Vertikales Einschubgehäuse mit Kühlkörper, Serie HYR

  TAKACHI ELECTRONICS ENCLOSURE

  Vertical Heat Sink Rack Case (HYR)
  
  [Features]
  · Surface treatment offers hair line processing with a luxurious feel and superior design characteristics.
  · Natural air-cooled case with vertical heatsink shape that accommodates heat countermeasures.
  · A total of 8 different rack case models in 4 different sizes featuring 5 different heights are available.
  · A very sturdy case made of aluminum extruded material.
  · Case with few structural parts that is easy to assemble.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	142.14 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Flammhemmendes Kunststoffgehäuse, Serie SS-N

  TAKACHI ELECTRONICS ENCLOSURE

  Flame-retardant Plastic Case (SS-N)
  
  [Features]
  · Because the fit between the upper and lower covers is uneven, the case is not prone to contamination by dust or water.
  · A plastic case with an attractive soft grain finish on the top and bottom surfaces.
  · We have provided a light gray flame-retardant type (UL94V-0) for your use.
  · There is also a full line-up of optional parts such as printed circuit boards that fit the case perfectly and parts for board mounting (options are sold separately).

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	5.94 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Kunststoffgehäuse, Serie SS

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  - Uneven fit between the upper and lower covers, keeps dust and water from contaminating the case.
  - Attractive finish on the plastic, using a soft grain finish on the top and bottom surfaces.
  - Light gray flame-retardant type (UL94V-0) available.
  - Full line-up of optional parts, such as printed circuit boards that fit the case perfectly and parts for board mounting (sold separately).

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	6.83 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Universalkasten, Modell CU-N

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · The cover is made of iron and the chassis is a standard electronics case made of colored aluminum.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	19.37 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kunststoffgehäuse mit Silikon-Schutzvorrichtung TWS

  TAKACHI ELECTRONICS ENCLOSURE

  An elastic protector that protects critical internal equipment from falling impacts.
  
  [Features]
  - A small general-purpose plastic case with silicon protector
  - The flexible, slip-resistant cover protects equipment from falling impacts.
  - 11 types in total; available in a choice of 18 colors.
  - Internal case material: Cases with the color-codes B (black) and G (light gray) are made from ABS resin (UL94HB). Cases with the color-code W (off-white) are made from flame-retardant ABS resin (UL94V-0).
  - Note that the material varies according to the color code.
  - Screw the silicon protector and plastic case together at the joint.
  - Do not over-tighten the screw; this will cause the screw to bite into the silicon.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	9.26 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Wärmeableitendes Aluminiumgehäuse AWA

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  ・An aluminum case that uses a heat-sink shaped aluminum extrusion
  ・A sophisticated design with a silver alumite finish on the panels
  ・The case has a shielding effect. The body-frame interior and the rear faces of the panels are conductive.
  · An insert groove is included inside the body frame enabling the board and chassis to be slid in.
  ・Ideal for use in industrial fan-less computers, measuring instruments, and digital audio amplifiers, etc.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	20.12 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Kunststoffgehäuse mit Silikon-Schutzvorrichtung, Ausführung CSS

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · Small form plastic case with silicon cover.
  · The cover is flexible and does not slip easily, protecting devices from impact due to falling.
  · A smartphone size CSS115 that takes 2 coin batteries (CR2032) and a type that does not use batteries have been newly added.
  · Replacing batteries is easy for the type that takes coin batteries (CR2032).
  Use the included terminal by soldering it on the circuit board.
  · For use with small devices like remote controllers, wireless devices, and simple measuring instruments, etc.
  · Customers can select from 3 sizes, 6 different models, and 12 different color finishes.
  · Silicon covers with and without a front face opening are available.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	4.95 €
  Minimum Lieferzeit ：	6 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Tragbares Kunststoffgehäuse CS

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  · A smartphone size CS115 that takes 2 coin batteries (CR2032) and an N type that does not use batteries have been newly added.
  · Replacing batteries is easy for the type with space for inserting coin batteries (CR2032). Use the included terminal by soldering it on the circuit board.
  · For use with small devices like remote controllers, wireless devices, simple measuring instruments, etc.
  · Choose from 3 sizes, 6 types, and 2 colors (white/black).

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	2.21 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Aluminium-Schutzkasten, Ausführung SL

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  • The SL series is a case series with 351 sizes, including height, 13 types, width, eight types, and depth, five types.
  · Case with panel construction that makes machining, silk printing, and carving easy.
  • This is an assembly-type case that can be used even with an independent case, or with a rack-mounted unit.
  • This is a JIS standard rack case using a mount bracket with height of 49, 99, 149, 199, 249, 299 W dimension 430 (431) mm.
  • This is an EIA standard rack case using a mount bracket with height of 44, 88, 132.5, 177, 221.5 W dimension 430 (431) mm.
  • When a side surface is used as the front surface, it becomes a panel case.
  • The panel, frame, and side panel can be combined with silver and black.
  • Drill holes to fasten the mount bracket and tilt stand mounting.
  • In case width × depth, 120×160, 120×230, 160×160, 160×230, 200×160, 260×160 ceiling panel, there is no heat dissipation hole.

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	90.17 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Kasten in Schalenausführung, Serie GL

  SETTSU METAL INDUSTRIAL

  Simple yet standard plastic case for electric equipment that is available in many types and a wide array of sizes
  
  [Features]
  · Plastic case that is a simple, basic, shell type for electronic devices.
  · Uneven engaging configuration allows for secure meeting of parts.
  · The inside has a groove for vertically mounting a circuit board.
  · The boss for mounting on a circuit board is provided on the upper and lower covers.
  · Conforms to protection class IP65 by using the optional sealing kit.
  · The GM series with battery box is also available.
  · Can be used as an interface, switch box or modem as a peripheral device for measurement, control, medical and research applications.

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	55.48 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Datec-Datenstation, Serie VEA

  SETTSU METAL INDUSTRIAL

  Plastic case for inclined electronic devices suited for input terminals.
  
  [Features]
  - This Datec terminal is a plastic case for electronic devices that can be used in a wide range of desktop applications.
  - This case was developed for data collection and is characterized by its high degree of diversity.
  - The ergonomically designed sloping angle of the operable part allows for easy operation and reading.
  - Boasts a easy-to-assemble structure which reduces assembly and maintenance time and costs.
  - All assembly screws are hidden in the covering trim, making them invisible from the exterior.
  - Designed with flat surface parts suited for boring.
  - Protection rating of IP54.
  - Can be used for a wide range of applications, including machinery operation, data collection, entry and security management, measurement and control, heating and air-conditioning controls, medical treatment, safety management, etc.

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	139.71 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• 

  Carry Tech, Serie VUA

  SETTSU METAL INDUSTRIAL

  [Features]
  - Easy-to-carry plastic case for electronic equipment with a handle.
  - The design incorporates a handle for a broader range of possible new usage applications.
  - The handle is positioned above the center of gravity line of the case for a well-balance product design. It provides ergonomically designed superior operability.
  - The handle pad uses flexible TPE material (elastomer) that feels comfortable to the touch and prevents slipping.
  - The back face of the case incorporates indentations that make it easy to maintain your grip when holding it in your hand while working.

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	103.82 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Kunststoff-Netzwerkgehäuse, Modell PF

  TAKACHI ELECTRONICS ENCLOSURE

  [Features]
  - A panel plastic case with a flat design that has perfectly even panel surfaces.
  - Made from flame retardant ABS resin (UL94V-0) in all 8 sizes.
  - Available in off-white and dark gray.
  · Equipped with a boss for mounting on a circuit board.
  - Case with a design that makes it suitable for tabletop use or mounting to wall services.
  - May be used with a variety of devices, such as communication devices, measuring instrument controllers, etc.

  • Mengenrabatt

  2D CAD Daten verfügbar

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	9.68 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• 

  Schaltkasten, Serie T

  SETTSU METAL INDUSTRIAL

  Zum Vergleich auswählen

  Jetzt konfigurieren
  ab∗ ：	70.73 €
  Minimum Lieferzeit ：	5 Arbeitstage

  *Stückpreis Standardkonfiguration

Loading...