HIROSE ELECTRONIC Rechteckstecker（D· E· F：Dsub）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
D-Sub-Steckverbinder (Flachbandkabel-Druckverbinder) – Serie FD
HIROSE ELECTRONIC
A ribbon/cable pressure connection type D-sub connector. As a 1.27-mm pitch ribbon cable is optimal, it can be used in combination with other connectors.
[Features]
· Has a metal shell and so is small and lightweight.
· Connector mounting can be performed on the chassis, front or back, or one of the sides.
· The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.
· As the cable pitch at the pressure attachment site is a standard 1.27 mm, a normal ribbon cable can be easily connected.
· The purpose of pressure connections is the ability to make easy connections with the same purpose as other ribbon cable connectors.
· A connection press can also be used.- Mengenrabatt
ab∗ ： 11.39 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckergehäuse D-Sub-Steckverbinder (EMI-Abschirmung) , Serie CTH
HIROSE ELECTRONIC
These are EMI-shielded plug cases for D-sub connectors. • Because the ABS resin is plated, the connectors are lightweight, sturdy, and provide improved electromagnetic shielding.
[Features]
· Because the lock mechanism is a screw type mechanism it is rugged and reliable.
· Because the material properties call for plating a tough ABS resin, the resin is lightweight, solid, and provides an improved electromagnetic wave shielding effect.
· In order to improve the shield effect, the cable clamp is secured using 2 types of clamps on the shield part and the clamp has a configuration for pinching the plug cases together.
• Use screws to ground the drain wire of the cable with a clamp.
• Easily incorporated using solder (HD type), pressure contact (FD*D type) or crimping (CD type).
• For FD*D, however, wire a fused I/O cable when using the case.
• CTH-type plug cases use UL94HB ABS resin and the plating conforms to the UL746C standard.- Mengenrabatt
ab∗ ： 4.43 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
D-Sub-Steckverbinder (Flachbandkabel-Druckverbinder, flache Bauweise) – Serie FD*D
HIROSE ELECTRONIC
A ribbon/cable crimp connection type D-sub connector. Low height on the wiring side helps save space within the set.
[Features]
• Metal shell makes it compact and sturdy.
• Connectors can be mounted on the chassis, or on the front or back sides of the panel.
• Height of the wiring side is greatly reduced to facilitate more compact sets.
· The structure uses a piece of metal to secure the ribbon cable holding plate and is thus able to provide a strong securing force to secure the cable reliably.
• Standard 1.27 mm-pitch ribbon cable can also be pressure-contact connected by replacing the tool when the pitch is something other than the 1.38-mm pitch of the D-sub. (Note that in such cases, a tool that slits cable will be needed.)
• Discrete cables can also be pressure-contact connected by using a multi-core cable pressure-contact device.- Mengenrabatt
ab∗ ： 4.75 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
D-Sub-Steckverbinder (Lötverbindung) – Serie HD
HIROSE ELECTRONIC
A solder connection type D-sub connector. Terminal connection portion has a solder cup for the easy attachment of every cable type.
[Features]
· Small and lightweight connector due to metal shell.
· The solder attachment side has a solder cup construction for easy soldering. It is also optimal for wires up to a maximum size of AWG#20.
· The insulation material is heat/chemical resistant and uses the excellent PBT resin (UL94V-O) containing glass.
· CTF, CTH, and other plug case types can be used. Straight dip (SD type), right angle dip (RD type), and ribbon pressure (FD type) connections can be used.- Mengenrabatt
ab∗ ： 3.11 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
D-Sub-Steckverbinder (Crimp-Verdrahtung) – Serie CD【1-100 Stk. pro Packung】
HIROSE ELECTRONIC
A crimped wire connection type D-sub connector. The cable can be connected to #20–28 AWG (using two types of terminal pins).
[Features]
· Has a metal shell and so is small and lightweight.
· Connector mounting can be performed on the chassis, front or back, or one of the sides.
· The attaching and detaching of the terminals is done by pressing the retainer sideways. Therefore, no special extraction tool is required.
· The insulator uses a UL material synthetic resin with excellent heat-resistant, chemical-resistant properties.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you. Returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
ab∗ ： 2.55 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckergehäuse D-Sub-Steckverbinder (Kunststoff) , Serie CTF
HIROSE ELECTRONIC
These are resin cases for D-sub connectors. Screw locks make them sturdy and secure.
[Features]
· Because the lock mechanism is a screw type mechanism, it is rugged and reliable.
• Made of strong ABS resin, so they are lightweight and sturdy.
• The plastic cases are divided at the center part of the cable guiding passage, making them easy to assemble and maintain, and requiring fewer screws.
• Locking brackets are available in either rectangular or hex formats to match the way the panel is mounted.
• 25-contact models are plug cases for modems as defined in JIS-C-6361.
• Easily incorporated using solder (HD type) or crimping (CD type).- Mengenrabatt
ab∗ ： 3.72 € Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
D-Sub-Steckverbinder (Ausführung mit gerader Platinenmontage) , Serie SD
HIROSE ELECTRONIC
A straight circuit board mounting type D-sub connector. Usable with each type of D-sub connector.
[Features]
· Has a metal shell and so has a small and lightweight connector.
· The terminal contact portion is gold-plated, the circuit board mounting side is gold flash/tin-plated, and it excels at effectively reducing metal.
· Affixed perpendicularly on a printed circuit board for high-density mounting, and highly useful for connecting to cable plugs.
· With dip soldering (HD type), crimping (CD type), and ribbon pressure connecting (FD type), this product can be used with a variety of models.
· The insulation material is heat resistant and uses the excellent PBT resin (UL94V-0)containing glass.- Mengenrabatt
ab∗ ： 3.11 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
D-Sub-Steckverbinder (Ausführung mit rechtwinkliger Platinenmontage) , Serie RD*D
HIROSE ELECTRONIC
These D-sub connectors are right-angle board-mounted types. Their lock mechanisms are selectable, and they can be combined with any type of D-sub plug.
[Features]
· Has a metal shell and so has a small and lightweight connector.
• They are integrated with RD-type molds and are of simple construction.
• They install directly in parallel to the PCB and mount at high density, making connection to cable plugs extremely convenient.
• The connection and the board mounting areas are metal plated.
• Enables a variety of assembly techniques, including dip soldering (HD type), crimping (CD type), and ribbon pressure contact (FD type).
• A UL synthetic resin that is heat and chemical resistant, and is used as the insulating material.
• Various accessories can be employed to allow these connectors to be used in different applications.- Mengenrabatt
ab∗ ： 3.84 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Connector Shape |
| A· B· C |
| D· E· F |
| G·H·I |
| J·K·L |
| M·N·O |
| P· Q· R |
| S· T· U |
| Number |
| Applicable pin/contact |
| Number Of Cores |
| Application |
| Allowable Current(A) |
| Allowable Voltage(V) |
| Wire connection method |
| Connection direction |
| Protection function (environmentally resistant) |
| Representative Standard |
|
|
|
|
|
|
|
| |
| Warenzeichen | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC |
| Artikelserie | D-Sub-Steckverbinder (Flachbandkabel-Druckverbinder) – Serie FD | Steckergehäuse D-Sub-Steckverbinder (EMI-Abschirmung) , Serie CTH | D-Sub-Steckverbinder (Flachbandkabel-Druckverbinder, flache Bauweise) – Serie FD*D | D-Sub-Steckverbinder (Crimp-Verdrahtung) – Serie CD【1-100 Stk. pro Packung】 | Steckergehäuse D-Sub-Steckverbinder (Kunststoff) , Serie CTF | D-Sub-Steckverbinder (Ausführung mit gerader Platinenmontage) , Serie SD | D-Sub-Steckverbinder (Ausführung mit rechtwinkliger Platinenmontage) , Serie RD*D | |
| ab∗ | 11.39 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.43 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.75 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.11 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.55 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.72 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.11 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.84 € *Stückpreis Standardkonfiguration Mengenrabatt |
| Minimum Lieferzeit ： | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | Versand am selben Tag | 5 Arbeitstage | 5 Arbeitstage |
| Connector Shape | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch | Quadratisch |
| A· B· C | - | Sonstige | - | - | Sonstige | Sonstige | - | - |
| D· E· F | Dsub | Dsub | Dsub | Dsub | Dsub | Dsub | Dsub | Dsub |
| G·H·I | - | - | - | Sonstige | - | - | - | - |
| J·K·L | - | - | - | - | - | - | - | - |
| M·N·O | - | - | - | - | - | - | - | - |
| P· Q· R | - | - | - | - | - | - | - | Sonstige |
| S· T· U | - | - | - | - | - | - | Sonstige | - |
| Number | - | - | - | - | - | - | - | - |
| Applicable pin/contact | Stecker / Buchse | - | Stecker / Buchse | Stecker / Buchse | Stecker / Buchse | - | Stecker / Buchse | Stecker / Buchse |
| Number Of Cores | 9 ～ 37 | 9 ～ 37 | 9 ～ 37 | 9 ～ 50 | 9 ～ 37 | 9 ～ 37 | 9 ～ 50 | 9 ～ 37 |
| Application | Kabelanschluss | - | Kabelanschluss | Kabelanschluss | Kabelanschluss | - | Für PCB | Für PCB |
| Allowable Current(A) | 1 | - | 1 | 3 | 3 | - | 3 | 3 |
| Allowable Voltage(V) | 200 VAC | - | 200 VAC | AC 400 | AC350 | - | AC350 | AC350 |
| Wire connection method | Pressschweißen | - | Pressschweißen | Lötmittel | Crimp | - | Sonstige | - |
| Connection direction | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Winkel |
| Protection function (environmentally resistant) | - | - | - | - | - | - | - | - |
| Representative Standard | - | - | - | - | - | - | - | - |
Loading...
Filtern nach:
Stock
-
- Stock Items Included
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Connector Shape
- Quadratisch
- Sonstige
-
A· B· C
- Sonstige
-
D· E· F
- Dsub
- FCN
- Sonstige
-
G·H·I
- Für Hochleistungsanwendungen
- Sonstige
-
J·K·L
- Sonstige
-
M·N·O
- MR
- MIL
- Sonstige
-
P· Q· R
- Sonstige
-
S· T· U
- Sonstige
-
Number
- Sonstige
-
Applicable pin/contact
- Stecker
- Buchse
- Kombination aus Stecker/Buchse
- Sonstige
-
Number Of Cores
-
Application
-
Allowable Current(A)
-
Allowable Voltage(V)
- 5
- DC 12
- 12 VDC - 230 VAC
- 17.5
- 24
- 25
- 50
- AC 50
- 72
- 100
- AC100
- 120 V AC
- 125
- AC125
- 150
- AC 150
- 160
- 200 VAC
- 230/400
- 250
- 250 VAC
- AC 250, AC 125
- AC 250, DC 350
- 300
- AC300
- AC 300
- AC 300, AC 30
- AC 300, AC 250
- 320
- AC350
- 400
- AC 400
- 400/400 V (Leistungs-/Steuerungsbereich)
- 400/690
- 400/690 V (Leiter-Erde/Leiter/Leiter)
- 400/690 V(Leiter-Erde/Leiter-Leiter)
- 500
- AC500
- AC / DC 500
- 550
- 600
- AC 600, AC 250
- 630
- 690
- 690/160 V (Leistungs-/Steuerungsbereich)
- 830
- 830/400 V (Leistungs-/Steuerungsbereich)
- 1000
- 1550
- AC / DC 3000
- 3100
-
Wire connection method
- Lötmittel
- Crimp
- Pressschweißen
- Befestigung mit Schrauben
- Sonstige
-
Connection direction
- Gerade
- Winkel
- Sonstige
-
Protection function (environmentally resistant)
-
Representative Standard
Suchergebnisse durch Herstellerauswahl einschränken
-
- MISUMI (0)
- HIROSE ELECTRONIC (8)
- JAPAN AVIATION ELECTRONICS(JAE) (1)
- BKL ELECTRONIC (0)
- KEL (0)
- FINDER (0)
- UNIVER (0)
- FISCHER ELEKTRONIK (0)
- PROVERTHA (0)
- FUJITSU COMPONENT (0)
- IFM (0)
- NEUTRIK (0)
- TE CONNECTIVITY (0)
- LUMBERG (0)
- AMPHENOL ICC (0)
- HELLERMANN TYTON (0)
- CONNFLY (0)
- PTR (0)
- DECA (0)
- BINDER (0)
- SOURIAU (0)
- HARTING (0)
- WEIDMÜLLER (0)
- EDAC (0)
- CONEC (0)
- MOLEX (0)
- LAPP (0)
- HONDA TSUSHIN KOGYO (0)
- WAGO (0)
- ILME (0)
- ECON CONNECT (0)
- TRU COMPONENTS (0)
- PHOENIX CONTACT (0)
- HIRSCHMANN (0)
- FUJIKURA (DDK) (0)
- MH CONNECTORS (0)
- ASSMANN WSW (0)
- VOGT VERBINDUNGSTECHNIK (0)
- OMRON (0)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Rechteckstecker
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.