- Hinweis auf planmäßige Wartung: Diese Seite wird auf Grund von Wartungsarbeiten in der Zeit von 3:00 bis 15:00 (CEST) 16/6/2024 nicht verfügbar sein. Wir entschuldigen uns vielmals für die Unannehmlichkeiten.
HIROSE ELECTRONIC Steckverbinder für Platinen（paßender Sift / Kontakt：Buchse (Buchse)）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
Platine-zu-Platine-Steckverbinder (0,5 mm Rastermaß und 4 bis 5 mm Höhe) – Serie FX10
HIROSE ELECTRONIC
[Features]
· Board-to-board connector with a ground plate, height between boards depends on application (4 to 5 mm) and whether or not to use a ground plate is selectable.
Some in-stock items are custom products, therefore returns and cancellations are not possible.- Mengenrabatt
ab∗ ： 4.10 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
EnerBee Platine-zu-Kabel-Steckverbinder mit Verriegelung, Serie DF33C【100 Stk. pro Packung】
HIROSE ELECTRONIC
Maximum 5 A. 3.3mm pitch. Satisfies the criteria of the Electrical Appliances and Material Safety Act: Creepage distance: 1.5 mm (resin filling) Widely used as a compact internal power supply connector.- Mengenrabatt
ab∗ ： 9.01 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder mit 2,54 mm Rastermaß: Serie HIF3H
HIROSE ELECTRONIC
This is a board-to-board interconnecting (stacking, vertical) connector with a 2.54mm pitch. This can be combined with other HIF3 series connectors.
[Features]
・Product variations: It is possible to connect board-to-board either horizontally or at a right angle.
・Compatibility: It can be combined with other HIF3 series connectors.- Mengenrabatt
ab∗ ： 1.94 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
DIN-Norm-konformer Platine-zu-Platine-Steckverbinder, Serie PCN10【1-100 Stk. pro Packung】
HIROSE ELECTRONIC
This is a DIN standard compliant board-to-board connector. Available in a wide variety and supports various connections.- Mengenrabatt
ab∗ ： 2.66 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Platine-Steckverbinder mit 1,27 mm Rastermaß und 5 bis 11 mm Höhe – Serie FX4
HIROSE ELECTRONIC
Board-to-board connector with half pitch. DIP circuit board mounting method; choose from a 5 to 11 mm mating height.
[Features]
·The FX4 series is a small-type board-to-board connector able to be set at a stacking height of 1 mm.
●Dip Timer.
1. Small and Lightweight.
・Mounting space and weight are the same as the prior products (FX2 series).
・Approx. 30% in comparison, mounting area is approx. 70% of prior product.
2. · Compatible with 5 mm to 11 mm stacking height.
· The stacking height between circuit boards is set at between 5 and 11 mm. in 1 mm increments.
3. Prevention of flux oozing.
· Prevents flux oozing during circuit board dip soldering.
4. Construction that prevents mis-insertion and reduces the required insertion/extraction force.
· The mating portion is constructed to completely prevent mis-insertion. It also utilizes a construction that reduces the amount of force required to insert and extract the connector.- Mengenrabatt
ab∗ ： 2.01 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Platine-Steckverbinder (0,6 mm Rastermaß, 5 bis 16 mm Höhe) – Serie FX8C
HIROSE ELECTRONIC
The height between boards can be selected from 5 to 16 mm. Although it is compact, it has a guiding mechanism to improve operability. Can use for a wide range of equipment.
[Features]
· Stacking height 3 mm to 16 mm compatible.
· Stacking height between boards of 3 mm to 16 mm is applicable.
▪ SMT co‐planarity.
▪ The SMT solder part lead's co-planarity maintains high precision and 0.1 mm or less.
· Fit guiding.
· Although very small in size, importance is placed on fit operability by providing a guiding rib with a self-alignment of ± 0.6 mm.
· Protects against incorrect insertion into the circuit board.
· Equipped with a circuit board positioning boss, which prevents incorrect insertion into the circuit board by leveraging the position and diameter of the boss.
· Two-part integrated product.
· This novel, two-piece integrated product is available for all terminal pin number configurations and makes it possible to maintain mounting position accuracy. This is achieved by consolidating two connectors using a unique method, which improves fitting reliability when using two fine-pitch connectors. (The standard fitting pitch between the two rows for the two-piece integrated version is 11 mm.)
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
ab∗ ： 3.28 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder für unterseitigen Eingang mit 2,54 mm Rastermaß, Serie MDF-7
HIROSE ELECTRONIC
With the 2.54-mm pitch bottom entry connector and circuit board height can be set freely. Also able to be connected with IPM and IGBT.
[Features]
▪ Circuit board gap dimensions can be set freely: With the header pin pass-through type construction and a number of header variations, circuit board gap dimensions can be set outside of predetermined levels.
▪ Unified part loading surface: 2 circuit board part loading surfaces can be oriented in the same direction while facing each other.
▪ Rich variation: single-array, double-array, and tin/gold plating available.
▪ In addition, we provide headers that conform to all circuit board gap dimensions for compatibility with items outside the catalog. Feel free to discuss further details with us.- Mengenrabatt
ab∗ ： 0.60 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Stiftleiste mit 2 mm Rastermaß (Klemmen mit 2 Reihen) , Serie A3【1-100 Stk. pro Packung】
HIROSE ELECTRONIC
2-mm pitch pin header terminal 2 row type. Allows for even higher precision installation.
[Features]
· Small, high-density mounting: A small, lightweight design enables high-density mounting.
· Also, the crimped slip case can be used by aligning connectors in a 2 mm grid.
· Product variation: In addition to dip types, there are SMT and crimp types, and thus a wide array of variations is provided.
· Stacking variation: When used board-to-board in combination with the A3B pin header, the distance between the boards can be set to 6 mm, or 5.2 mm when used in combination with the A3C pin header.
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
ab∗ ： 0.19 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder / FPC/FFC-Steckverbinder, Serie FH28 (Höhe 2,55 mm)
HIROSE ELECTRONIC
[Features]
· A solidly built connector for FPC/FFC connections.
· An FPC positioning mechanism provides highly reliable connections.
In-stock items are custom products, therefore returns and cancellations are not possible.- Mengenrabatt
ab∗ ： 4.58 € Minimum Lieferzeit ： 7 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Platine-Steckverbinder mit 0,5 mm Rastermaß und 2 bis 3 mm Höhe, Serie FX11
HIROSE ELECTRONIC
[Features]
· A board-to-board connector with a ground plate.
· Select with/without the ground plate and also the height of the board spacing (2–3 mm) to match the application.- Mengenrabatt
ab∗ ： 3.21 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Platine-Steckverbinder mit 0,8 mm Rastermaß und 5 bis 9 mm Höhe, Serie FX6
HIROSE ELECTRONIC
The height between boards can be selected from 5 to 9 mm. With a long mating length and large self-alignment volume while maintaining a small size, this product offers high connection reliability.
[Features]
· Compatible with 5 mm to 9 mm stacking height.
· The stacking height between circuit boards is set at between 5 and 9 mm. in 1 mm increments.
· Long effective mating length of 1.7 mm.
· A long and spacious effective mating length of 1.7 mm even with RoPro connectors.
· Fit guiding.
· A ±1 mm self alignment and large guiding volume makes for easy mating.
· Supports automatic mounting.
·In consideration of automatic mounting, and using stick packaging for standard packaging specifications, units with less than 80 pins are available for emboss packaging (however the product has an 80-pin limit).
▪ The SMT solder portion's lead co-planarity maintains a high precision of 0.1 mm max.- Mengenrabatt
ab∗ ： 2.36 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
DIN-Norm-konformer Platine-zu-Platine-Steckverbinder, Serie PCN12
HIROSE ELECTRONIC
This is a DIN standard compliant board-to-board connector. Available in a wide variety and supports various connections.- Mengenrabatt
ab∗ ： 1.79 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Buchse passend zu Card Bus, kompatibel mit PC-Kartennormen, Serie IC9
HIROSE ELECTRONIC
This socket connector conforms to PC card bus standards. Choose from 2 lead degree of eccentricity.
[Features]
・PC Card Standards: Equipped with a ground plate containing 8 ground dimples.
・This allows for every type of card signal to be accelerated.
・Repairability: Separate card connector and ground plate mounting construction allows for soldering repairs.
・ Lead degree of eccentricity: 0.3 mm and 0.9 mm degrees of eccentricity are provided in order to alter circuit board position in line with PC card height.- Mengenrabatt
ab∗ ： 5.65 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder / Anschluss für interne Stromversorgung, Baureihe DF63 (15 A-Unterstützung, 3,96 mm Raster)【100 Stk. pro Packung】
HIROSE ELECTRONIC
Maximum 15A. 3.96mm pitch. This connector employs a center lock function which enables high-density mounting, contributing to space saving on the board.- Mengenrabatt
ab∗ ： 12.95 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Platine-Steckverbinder mit 0,6 mm Rastermaß und 3 bis 4 mm Höhe – Serie FX8
HIROSE ELECTRONIC
The height between boards can be selected from 3 to 4 mm. Although it is compact, it has a guiding mechanism to improve operability. Can be used for a wide range of equipment.
[Features]
· Stacking height 3 mm to 16 mm compatible.
· Stacking height between boards of 3 mm to 16 mm can be applied.
▪ SMT co‐planarity.
▪ The SMT solder part lead's co-planarity maintains high precision and 0.1 mm max.
· Fit guiding.
· Equipped with latching guiding ribs while being extremely small, the self-alignment tolerance of ±0.6 mm has been given much attention.
· Prevents mis-insertion with circuit boards.
· By placing circuit board positioning screws, mis-insertion to the circuit board is prevented based on the screw location and diameter.
・2-Piece Unit.
・With 2 fine-pitch connector units used for increased connection reliability, we offer a unique 2-connection method for each terminal as a new way to ensure highly accurate mounting (standard 11 mm connection pitch between the 2 arrays in the 2-piece unit).- Mengenrabatt
ab∗ ： 2.45 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Stiftleiste mit 2,54 mm Rastermaß (Klemme mit 1 Reihe) , Serie A2
HIROSE ELECTRONIC
2.54-mm pitch pin header terminal 1 row type. Can be arrayed without creating wasted space on 2.54 mm mesh board.
[Features]
· High density: Can be arrayed without creating wasted space on a 2.54 mm mesh board when the connectors are arrayed lengthwise.
· Number of pins variations: A1 series has 16 types from 6 pins to 64 pins and A2 series has 20 types from 1 pin to 20 pins.
· Compatibility: the A1 series is interchangeable with the HIF3B series cable side and HIF3H (receptacle) for a wide range of use.- Mengenrabatt
ab∗ ： 0.28 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Stiftleiste mit 2,54 mm Rastermaß (zweireihige Klemmen) , Serie A1
HIROSE ELECTRONIC
2.54-mm pitch pin header terminal 2 row type. Can be arrayed without creating wasted space on 2.54 mm mesh board.
[Features]
· High density: Can be arrayed without creating wasted space on a 2.54 mm mesh board when the connectors are arrayed lengthwise.
· Number of pins variations: A1 series has 16 types from 6 pins to 64 pins and A2 series has 20 types from 1 pin to 20 pins.
· Compatibility: the A1 series is interchangeable with the HIF3B series cable side and HIF4H (receptacle) for a wide range of use.- Mengenrabatt
ab∗ ： 0.40 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
Stiftleiste mit 2 mm Rastermaß (Klemme mit 1 Reihe) , Serie A4
HIROSE ELECTRONIC
2-mm pitch pin header terminal 1 row type. Allows for even higher precision installation.
[Features]
· Small, high-density mounting: A small, lightweight design enables high-density mounting.
· Also, the crimped slip case can be used by aligning connectors in a 2 mm grid.
· Product variation: In addition to DIP types, there are SMT and crimp types, and thus a wide array of variations is provided.
· Stacking variation: Can be set when used with board-to-board, in combination with A3B pin header and a 6 mm distance between boards, or in combination with A3C pin header and a space of 5.1 mm between boards.- Mengenrabatt
ab∗ ： 0.19 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Kabel-Steckverbinder mit Verriegelung, 7,92 mm Rastermaß – Serie DF22【1-100 Stk. pro Packung】
HIROSE ELECTRONIC
[Features]
· Cable connector for board-to-cable and cable-to-cable connections. Supports 30 maximum amperes.
· Equipped with a lock mechanism and mechanism for preventing incorrect insertion to ensure safety.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Mengenrabatt
ab∗ ： 0.09 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
DIN-Norm-konformer Platine-zu-Platine-Steckverbinder, Serie PCN13
HIROSE ELECTRONIC
This is a DIN standard compliant board-to-board connector. Reduces cost by using a single-sided, two-point connection for the terminal.ab∗ ： 1.50 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Rückseitiger Steckverbinder Serie NX für E / A-Karten
HIROSE ELECTRONIC
These are back connectors for I/O cards. The low profile design is shielded using a metal shell.
[Features]
• Ultra-low profile: The mounted height of the receptacle connector is 2.9 mm for an ultra-low profile, allowing mounting on type II I/O cards.
• Shell is metal: A metal shell was used for better shielding.
• Structured so that the metal shell always touches before the contacts do.
• Full ESD shielding: A cover over the mold provides full ESD shielding.
• Locks securely: An inner lock makes locking more secure.
• Less wiring work: The plug-side wiring uses AWG #28 pressure contacting (discrete type), so wiring is less work.
• Sequence structure: The receptacle connector for the I/O card is a 0.8 mm-pitch, SMT-type sequence structure.- Mengenrabatt
ab∗ ： 5.12 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
MicroSD-Karten-Anschluss – Serie DM3
HIROSE ELECTRONIC
A socket connector for use with the microSD Card TM. Available in a wide array of variations.
Some in-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Mengenrabatt
ab∗ ： 1.23 € Minimum Lieferzeit ： 13 Arbeitstage *Stückpreis Standardkonfiguration
-
PC-Kartenanschluss, Serie IC1, kompatibel mit PC-Kartenstandard
HIROSE ELECTRONIC
This PC card connector is compliant with the PC Card Standard.
[Features]
· Compliant with the PC Card Standard: the product complies with the PC Card Standard, including a mechanism for preventing incorrect insertion, a sequence structure for protecting circuits, and other features.
· Features a mechanism for preventing the card from shooting out: the ejection mechanism uses a unique structure to improve card protection.
· Effective use of space: standoffs that enable the mounting of parts underneath the connector are also available.
· Support for Type I and Type II cards: All ICI series pin connectors in the catalog support both Type I and Type II cards.
· Card connectors that support automatic mounting are available.
· Different types are available, making it possible to change the circuit board position based on the height of the parts contained in the PC card. Lead eccentricities of -0.2 mm, 0.3 mm, 0.55 mm, or 0.9 mm, and a circuit board-centered type are available.ab∗ ： 3.02 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
SIM-Karten-Stecker, Serie ID1
HIROSE ELECTRONIC
This is a SIM card connector. With the slide-lock method, card holder opening and closing is easy.- Mengenrabatt
ab∗ ： 1.96 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Steckverbinder / Steckverbinder für interne Stromversorgung, Baureihe DF60 (45 A-Support, 10,16 mm Raster)【100 Stk. pro Packung】
HIROSE ELECTRONIC
Maximum 45A. 10.16-mm pitch. This high power connector for large currents is the smallest size in its class.- Mengenrabatt
ab∗ ： 81.90 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
FunctionMAX Platine-zu-Platine-Steckverbinder, Serie FX18
HIROSE ELECTRONIC
0.8mm pitch. This is the basic series that is central to the FunctionMAX range. Selection is easy from the wide range of options, and the product is very user-friendly.- Mengenrabatt
ab∗ ： 10.75 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
FunctionMAX Platine-zu-Platine-Steckverbinder, Serie FX20
HIROSE ELECTRONIC
0.5mm pitch. The structure features two independent contacts for high contact reliability. It is suitable for harsh conditions such as automotive equipment applications.- Mengenrabatt
ab∗ ： 5.07 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Steckerform |
| A· B· C |
| D· E· F |
| G·H·I |
| M·N·O |
| P· Q· R |
| S· T· U |
| V· W· X |
| Anzahl |
| paßender Sift / Kontakt |
| Anzahl der Adern |
| Anwendung |
| Zulässiger Strom(A) |
| Zulässige Spannung(V) |
| Verdrahtungsverfahren |
| Anschlussrichtung |
| Schutzfunktion (umweltbeständig) |
| Repräsentativer Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC |
| Artikelserie | Platine-zu-Platine-Steckverbinder (0,5 mm Rastermaß und 4 bis 5 mm Höhe) – Serie FX10 | EnerBee Platine-zu-Kabel-Steckverbinder mit Verriegelung, Serie DF33C【100 Stk. pro Packung】 | Platine-zu-Kabel-Steckverbinder mit 2,54 mm Rastermaß: Serie HIF3H | DIN-Norm-konformer Platine-zu-Platine-Steckverbinder, Serie PCN10【1-100 Stk. pro Packung】 | Platine-zu-Platine-Steckverbinder mit 1,27 mm Rastermaß und 5 bis 11 mm Höhe – Serie FX4 | Platine-zu-Platine-Steckverbinder (0,6 mm Rastermaß, 5 bis 16 mm Höhe) – Serie FX8C | Steckverbinder für unterseitigen Eingang mit 2,54 mm Rastermaß, Serie MDF-7 | Stiftleiste mit 2 mm Rastermaß (Klemmen mit 2 Reihen) , Serie A3【1-100 Stk. pro Packung】 | Steckverbinder / FPC/FFC-Steckverbinder, Serie FH28 (Höhe 2,55 mm) | Platine-zu-Platine-Steckverbinder mit 0,5 mm Rastermaß und 2 bis 3 mm Höhe, Serie FX11 | Platine-zu-Platine-Steckverbinder mit 0,8 mm Rastermaß und 5 bis 9 mm Höhe, Serie FX6 | DIN-Norm-konformer Platine-zu-Platine-Steckverbinder, Serie PCN12 | Buchse passend zu Card Bus, kompatibel mit PC-Kartennormen, Serie IC9 | Platine-zu-Platine-Steckverbinder mit 0,6 mm Rastermaß und 3 bis 4 mm Höhe – Serie FX8 | Stiftleiste mit 2,54 mm Rastermaß (Klemme mit 1 Reihe) , Serie A2 | Stiftleiste mit 2,54 mm Rastermaß (zweireihige Klemmen) , Serie A1 | Stiftleiste mit 2 mm Rastermaß (Klemme mit 1 Reihe) , Serie A4 | DIN-Norm-konformer Platine-zu-Platine-Steckverbinder, Serie PCN13 | PC-Kartenanschluss, Serie IC1, kompatibel mit PC-Kartenstandard | ||||||||
| ab∗ | 4.10 € *Stückpreis Standardkonfiguration Mengenrabatt | 9.01 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.94 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.66 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.01 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.28 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.60 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.19 € *Stückpreis Standardkonfiguration Mengenrabatt | 4.58 € *Stückpreis Standardkonfiguration | 3.21 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.36 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.79 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.65 € *Stückpreis Standardkonfiguration Mengenrabatt | 12.95 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.45 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.28 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.40 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.19 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.09 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.50 € *Stückpreis Standardkonfiguration | 5.12 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.23 € *Stückpreis Standardkonfiguration | 3.02 € *Stückpreis Standardkonfiguration | 1.96 € *Stückpreis Standardkonfiguration Mengenrabatt | 81.90 € *Stückpreis Standardkonfiguration Mengenrabatt | 10.75 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.07 € *Stückpreis Standardkonfiguration Mengenrabatt |
| Minimum Lieferzeit ： | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 7 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 6 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 13 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage |
| Steckerform | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| A· B· C | - | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | Sonstige | Sonstige | Sonstige | - | - | - | - | - | - | - | - | - |
| D· E· F | Sonstige | Sonstige | - | - | Sonstige | Sonstige | - | - | Sonstige | Sonstige | Sonstige | - | - | Sonstige | Sonstige | - | - | - | Sonstige | - | - | Sonstige | - | - | Sonstige | Sonstige | Sonstige |
| G·H·I | - | - | Sonstige | - | - | - | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | Sonstige | Sonstige | - | - | - |
| M·N·O | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - |
| P· Q· R | - | - | - | Sonstige | - | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - | Sonstige | - | - | - | - | - | - | - |
| S· T· U | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| V· W· X | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Anzahl | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| paßender Sift / Kontakt | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) |
| Anzahl der Adern | 80 ～ 120 | 2 | 10 ～ 64 | 16 ～ 128 | 20 ～ 80 | 60 ～ 140 | 5 ～ 25 | 4 ～ 50 | 45 | 60 ～ 140 | 20 ～ 100 | 10 ～ 96 | 68 | 2 ～ 4 | 60 ～ 140 | 5 ～ 6 | 8 ～ 12 | 2 ～ 10 | 1 ～ 5 | 20 | 25 ～ 32 | 8 | 68 | 6 | 1 | 40 ～ 140 | 20 ～ 60 |
| Anwendung | Platine-zu-Platine | Kabelanschluss | Platine-zu-Platine | Kabelanschluss / Platine-zu-Platine | Platine-zu-Platine | Platine-zu-Platine | Platine-zu-Platine | Kabelanschluss / Platine-zu-Platine | Sonstige | Platine-zu-Platine | Platine-zu-Platine | Platine-zu-Platine | Für Leiterplatten | Kabelanschluss | Platine-zu-Platine | Kabelanschluss | Kabelanschluss | Kabelanschluss | Kabelanschluss | Platine-zu-Platine | Für Leiterplatten | Für Leiterplatten | Für Leiterplatten | Für Leiterplatten | Kabelanschluss | Platine-zu-Platine | Platine-zu-Platine |
| Zulässiger Strom(A) | 0.3 | 5 | 3 | 2 | 0.5 | 0.4 | 3 | 1 | 0.5 | 0.3 | 0.5 | 2 | 0.5 | 10 ～ 14 | 0.4 | 3 | 3 | 1 | 22 ～ 30 | 2 | 0.5 | 0.5 | 0.5 | 1 | - | 0.5 | 0.5 |
| Zulässige Spannung(V) | AC 50 | AC / DC 500 | AC 300 | AC 300 | AC125 | AC100 | 250 VAC | 200 VAC | AC 50 | AC 50 | AC100 | AC 300 | AC125 | AC / DC 630 | AC100 | 200 VAC | 200 VAC | 200 VAC | AC / DC 1000 | AC 300 | AC125 | AC125 | AC125 | AC100 | - | AC100 | AC 50 |
| Verdrahtungsverfahren | Sonstige | Crimp | Sonstige | Crimp / Sonstige | Sonstige | Sonstige | Sonstige | Crimp / Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Crimp | Sonstige | Crimp | Crimp | Crimp | Crimp | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Crimp | Sonstige | Sonstige |
| Anschlussrichtung | Gerade | Gerade | Gerade / Winkel | Gerade / Winkel | Gerade | Gerade | Gerade | Gerade / Winkel | Winkel | Gerade | Gerade | Gerade | Winkel | Gerade | Gerade | Gerade | Gerade | Gerade | Gerade | Winkel | Winkel | Winkel | Winkel | Winkel | - | Gerade | Gerade |
| Schutzfunktion (umweltbeständig) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Repräsentativer Standard | - | - | - | - | - | - | - | - | - | - | - | - | - | UL / CUL | - | - | - | - | UL / CUL / TUV | - | - | - | - | - | - | - | - |
Loading...
Filtern nach:
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Steckerform
- Rund
- Quadratisch
-
A· B· C
- Sonstige
-
D· E· F
- DIN/Mini-DIN
- Sonstige
-
G·H·I
- Sonstige
-
M·N·O
- Sonstige
-
P· Q· R
- Sonstige
-
S· T· U
- USB
-
V· W· X
-
Anzahl
- Sonstige
-
paßender Sift / Kontakt
- Stecker (Stecker)
- Buchse (Buchse)
- Sonstige
-
Anzahl der Adern
-
Anwendung
-
Zulässiger Strom(A)
-
Zulässige Spannung(V)
-
Verdrahtungsverfahren
- Lötmittel
- Crimp
- Pressschweißen
- Befestigung mit Schrauben
- Sonstige
-
Anschlussrichtung
- Gerade
- Winkel
-
Schutzfunktion (umweltbeständig)
-
Repräsentativer Standard
Suchergebnisse durch Herstellerauswahl einschränken
-
- HIROSE ELECTRONIC (27)
- OMRON (11)
- MOLEX (5)
- WEIDMÜLLER (3)
- FUJIKURA (DDK) (1)
- HONDA TSUSHIN KOGYO (1)
- HARTING (0)
- ERNI (0)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Steckverbinder für Platinen
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.