HIROSE ELECTRONIC Steckverbinder für Platinen（Zulässige Spannung：AC125）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
Platine-zu-Platine-Steckverbinder mit 1,27 mm Rastermaß und 5 bis 11 mm Höhe – Serie FX4
HIROSE ELECTRONIC
Board-to-board connector with half pitch. DIP circuit board mounting method; choose from a 5 to 11 mm mating height.
[Features]
·The FX4 series is a small-type board-to-board connector able to be set at a stacking height of 1 mm.
●Dip Timer.
1. Small and Lightweight.
・Mounting space and weight are the same as the prior products (FX2 series).
・Approx. 30% in comparison, mounting area is approx. 70% of prior product.
2. · Compatible with 5 mm to 11 mm stacking height.
· The stacking height between circuit boards is set at between 5 and 11 mm. in 1 mm increments.
3. Prevention of flux oozing.
· Prevents flux oozing during circuit board dip soldering.
4. Construction that prevents mis-insertion and reduces the required insertion/extraction force.
· The mating portion is constructed to completely prevent mis-insertion. It also utilizes a construction that reduces the amount of force required to insert and extract the connector.- Mengenrabatt
ab∗ ： 1.84 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
CF-Karten-Steckverbinder Serie MI20 / 21
HIROSE ELECTRONIC
This is a CF card connector. Wide variety available to suit different applications, with differing mount orientation, standoff inclusion, ejector button, and supported cards.- Mengenrabatt
ab∗ ： 3.81 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Rückseitiger Steckverbinder Serie NX für E / A-Karten
HIROSE ELECTRONIC
These are back connectors for I/O cards. The low profile design is shielded using a metal shell.
[Features]
• Ultra-low profile: The mounted height of the receptacle connector is 2.9 mm for an ultra-low profile, allowing mounting on type II I/O cards.
• Shell is metal: A metal shell was used for better shielding.
• Structured so that the metal shell always touches before the contacts do.
• Full ESD shielding: A cover over the mold provides full ESD shielding.
• Locks securely: An inner lock makes locking more secure.
• Less wiring work: The plug-side wiring uses AWG #28 pressure contacting (discrete type), so wiring is less work.
• Sequence structure: The receptacle connector for the I/O card is a 0.8 mm-pitch, SMT-type sequence structure.- Mengenrabatt
ab∗ ： 5.12 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
MicroSD-Karten-Anschluss – Serie DM3
HIROSE ELECTRONIC
A socket connector for use with the microSD Card TM. Available in a wide array of variations.
Some in-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Mengenrabatt
ab∗ ： 1.23 € Minimum Lieferzeit ： 13 Arbeitstage *Stückpreis Standardkonfiguration
-
PC-Kartenanschluss, Serie IC1, kompatibel mit PC-Kartenstandard
HIROSE ELECTRONIC
This PC card connector is compliant with the PC Card Standard.
[Features]
· Compliant with the PC Card Standard: the product complies with the PC Card Standard, including a mechanism for preventing incorrect insertion, a sequence structure for protecting circuits, and other features.
· Features a mechanism for preventing the card from shooting out: the ejection mechanism uses a unique structure to improve card protection.
· Effective use of space: standoffs that enable the mounting of parts underneath the connector are also available.
· Support for Type I and Type II cards: All ICI series pin connectors in the catalog support both Type I and Type II cards.
· Card connectors that support automatic mounting are available.
· Different types are available, making it possible to change the circuit board position based on the height of the parts contained in the PC card. Lead eccentricities of -0.2 mm, 0.3 mm, 0.55 mm, or 0.9 mm, and a circuit board-centered type are available.ab∗ ： 3.02 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Buchse passend zu Card Bus, kompatibel mit PC-Kartennormen, Serie IC9
HIROSE ELECTRONIC
This socket connector conforms to PC card bus standards. Choose from 2 lead degree of eccentricity.
[Features]
・PC Card Standards: Equipped with a ground plate containing 8 ground dimples.
・This allows for every type of card signal to be accelerated.
・Repairability: Separate card connector and ground plate mounting construction allows for soldering repairs.
・ Lead degree of eccentricity: 0.3 mm and 0.9 mm degrees of eccentricity are provided in order to alter circuit board position in line with PC card height.- Mengenrabatt
ab∗ ： 5.65 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Steckerform |
| A· B· C |
| D· E· F |
| G·H·I |
| M·N·O |
| P· Q· R |
| S· T· U |
| V· W· X |
| Anzahl |
| paßender Sift / Kontakt |
| Anzahl der Adern |
| Anwendung |
| Zulässiger Strom(A) |
| Zulässige Spannung(V) |
| Verdrahtungsverfahren |
| Anschlussrichtung |
| Schutzfunktion (umweltbeständig) |
| Repräsentativer Standard |
|
|
|
|
|
| |
| Warenzeichen | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC |
| Artikelserie | Platine-zu-Platine-Steckverbinder mit 1,27 mm Rastermaß und 5 bis 11 mm Höhe – Serie FX4 | PC-Kartenanschluss, Serie IC1, kompatibel mit PC-Kartenstandard | Buchse passend zu Card Bus, kompatibel mit PC-Kartennormen, Serie IC9 | |||
| ab∗ | 1.84 € *Stückpreis Standardkonfiguration Mengenrabatt | 3.81 € *Stückpreis Standardkonfiguration Mengenrabatt | 5.12 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.23 € *Stückpreis Standardkonfiguration | 3.02 € *Stückpreis Standardkonfiguration | 5.65 € *Stückpreis Standardkonfiguration Mengenrabatt |
| Minimum Lieferzeit ： | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 13 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage |
| Steckerform | - | - | - | - | - | - |
| A· B· C | - | - | - | - | - | - |
| D· E· F | Sonstige | - | - | Sonstige | - | - |
| G·H·I | - | - | - | - | Sonstige | Sonstige |
| M·N·O | - | Sonstige | Sonstige | - | - | - |
| P· Q· R | - | - | - | - | - | - |
| S· T· U | - | - | - | - | - | - |
| V· W· X | - | - | - | - | - | - |
| Anzahl | - | - | - | - | - | - |
| paßender Sift / Kontakt | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) | Stecker (Stecker) / Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) | Buchse (Buchse) |
| Anzahl der Adern | 20 ～ 80 | 50 | 25 ～ 32 | 8 | 68 | 68 |
| Anwendung | Platine-zu-Platine | Für Leiterplatten | Kabelanschluss / Für Leiterplatten | Für Leiterplatten | Für Leiterplatten | Für Leiterplatten |
| Zulässiger Strom(A) | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 | 0.5 |
| Zulässige Spannung(V) | AC125 | AC125 | AC125 | AC125 | AC125 | AC125 |
| Verdrahtungsverfahren | Sonstige | Sonstige | Pressschweißen / Sonstige | Sonstige | Sonstige | Sonstige |
| Anschlussrichtung | Gerade | Winkel | Gerade / Winkel | Winkel | Winkel | Winkel |
| Schutzfunktion (umweltbeständig) | - | - | - | - | - | - |
| Repräsentativer Standard | - | - | - | - | - | - |
Loading...
Filtern nach:
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Steckerform
- Rund
- Quadratisch
-
A· B· C
- Sonstige
-
D· E· F
- DIN/Mini-DIN
- Sonstige
-
G·H·I
- Sonstige
-
M·N·O
- Sonstige
-
P· Q· R
- Sonstige
-
S· T· U
- USB
-
V· W· X
-
Anzahl
- Sonstige
-
paßender Sift / Kontakt
- Stecker (Stecker)
- Buchse (Buchse)
- Sonstige
-
Anzahl der Adern
-
Anwendung
-
Zulässiger Strom(A)
-
Zulässige Spannung(V)
-
Verdrahtungsverfahren
- Lötmittel
- Crimp
- Pressschweißen
- Befestigung mit Schrauben
- Sonstige
-
Anschlussrichtung
- Gerade
- Winkel
-
Schutzfunktion (umweltbeständig)
-
Repräsentativer Standard
Suchergebnisse durch Herstellerauswahl einschränken
-
- HIROSE ELECTRONIC (6)
- OMRON (3)
- HONDA TSUSHIN KOGYO (1)
- FUJIKURA (DDK) (0)
- HARTING (0)
- MOLEX (0)
- WEIDMÜLLER (0)
- ERNI (0)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Steckverbinder für Platinen
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.