HIROSE ELECTRONIC Steckverbinder für Platinen（Zulässige Spannung：AC100）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
Platine-zu-Platine-Steckverbinder mit 0,8 mm Rastermaß und 5 bis 9 mm Höhe, Serie FX6
HIROSE ELECTRONIC
The height between boards can be selected from 5 to 9 mm. With a long mating length and large self-alignment volume while maintaining a small size, this product offers high connection reliability.
[Features]
· Compatible with 5 mm to 9 mm stacking height.
· The stacking height between circuit boards is set at between 5 and 9 mm. in 1 mm increments.
· Long effective mating length of 1.7 mm.
· A long and spacious effective mating length of 1.7 mm even with RoPro connectors.
· Fit guiding.
· A ±1 mm self alignment and large guiding volume makes for easy mating.
· Supports automatic mounting.
·In consideration of automatic mounting, and using stick packaging for standard packaging specifications, units with less than 80 pins are available for emboss packaging (however the product has an 80-pin limit).
▪ The SMT solder portion's lead co-planarity maintains a high precision of 0.1 mm max.- Mengenrabatt
ab∗ ： 1.39 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Platine-Steckverbinder (0,6 mm Rastermaß, 5 bis 16 mm Höhe) – Serie FX8C
HIROSE ELECTRONIC
The height between boards can be selected from 5 to 16 mm. Although it is compact, it has a guiding mechanism to improve operability. Can use for a wide range of equipment.
[Features]
· Stacking height 3 mm to 16 mm compatible.
· Stacking height between boards of 3 mm to 16 mm is applicable.
▪ SMT co‐planarity.
▪ The SMT solder part lead's co-planarity maintains high precision and 0.1 mm or less.
· Fit guiding.
· Although very small in size, importance is placed on fit operability by providing a guiding rib with a self-alignment of ± 0.6 mm.
· Protects against incorrect insertion into the circuit board.
· Equipped with a circuit board positioning boss, which prevents incorrect insertion into the circuit board by leveraging the position and diameter of the boss.
· Two-part integrated product.
· This novel, two-piece integrated product is available for all terminal pin number configurations and makes it possible to maintain mounting position accuracy. This is achieved by consolidating two connectors using a unique method, which improves fitting reliability when using two fine-pitch connectors. (The standard fitting pitch between the two rows for the two-piece integrated version is 11 mm.)
In-stock items are made-to-order, so returns and cancellations are not possible. Thank you for your understanding.- Mengenrabatt
ab∗ ： 0.37 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Platine-Steckverbinder für rechtwinklige Verbindungen mit 1 mm Rastermaß, Serie FX5
HIROSE ELECTRONIC
A board-to-board connector for perpendicular connection. Equipped with 2 header heights to choose from, 2-stage sequence construction, and a large, inviting form.
[Features]
· Number of pins, header-side height: 2 types.
· 2 header types: low-back and high-back, are provided for variation in pin number when connecting to HDD, FDD, CD-ROM, and other units, as well as for variation in mating height.
· 2-stage sequence construction: the mating sequence has been constructed in 2 stages to protect the end unit.
·Fit guiding: With a ±1 mm self alignment, large guiding volume for easy mating, and guide ribs, mating is easily achieved.
▪ The SMT solder portion's lead co-planarity maintains a high precision of 0.1 mm max.
▪Miniaturization: Mounting area has been reduced by approx. 30% compared to prior half pitch connectors (1.27-mm pitch).- Mengenrabatt
ab∗ ： 2.04 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
FunctionMAX Platine-zu-Platine-Steckverbinder, Serie FX18
HIROSE ELECTRONIC
0.8mm pitch. This is the basic series that is central to the FunctionMAX range. Selection is easy from the wide range of options, and the product is very user-friendly.- Mengenrabatt
ab∗ ： 8.91 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
Platine-zu-Platine-Steckverbinder mit 0,6 mm Rastermaß und 3 bis 4 mm Höhe – Serie FX8
HIROSE ELECTRONIC
The height between boards can be selected from 3 to 4 mm. Although it is compact, it has a guiding mechanism to improve operability. Can be used for a wide range of equipment.
[Features]
· Stacking height 3 mm to 16 mm compatible.
· Stacking height between boards of 3 mm to 16 mm can be applied.
▪ SMT co‐planarity.
▪ The SMT solder part lead's co-planarity maintains high precision and 0.1 mm max.
· Fit guiding.
· Equipped with latching guiding ribs while being extremely small, the self-alignment tolerance of ±0.6 mm has been given much attention.
· Prevents mis-insertion with circuit boards.
· By placing circuit board positioning screws, mis-insertion to the circuit board is prevented based on the screw location and diameter.
・2-Piece Unit.
・With 2 fine-pitch connector units used for increased connection reliability, we offer a unique 2-connection method for each terminal as a new way to ensure highly accurate mounting (standard 11 mm connection pitch between the 2 arrays in the 2-piece unit).- Mengenrabatt
ab∗ ： 1.56 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
SIM-Karten-Stecker, Serie ID1
HIROSE ELECTRONIC
This is a SIM card connector. With the slide-lock method, card holder opening and closing is easy.- Mengenrabatt
ab∗ ： 1.94 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Steckerform |
| A· B· C |
| D· E· F |
| G·H·I |
| M·N·O |
| P· Q· R |
| S· T· U |
| V· W· X |
| Anzahl |
| paßender Sift / Kontakt |
| Anzahl der Adern |
| Anwendung |
| Zulässiger Strom(A) |
| Zulässige Spannung(V) |
| Verdrahtungsverfahren |
| Anschlussrichtung |
| Schutzfunktion (umweltbeständig) |
| Repräsentativer Standard |
|
|
|
|
|
| |
| Warenzeichen | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC |
| Artikelserie | Platine-zu-Platine-Steckverbinder mit 0,8 mm Rastermaß und 5 bis 9 mm Höhe, Serie FX6 | Platine-zu-Platine-Steckverbinder (0,6 mm Rastermaß, 5 bis 16 mm Höhe) – Serie FX8C | Platine-zu-Platine-Steckverbinder für rechtwinklige Verbindungen mit 1 mm Rastermaß, Serie FX5 | Platine-zu-Platine-Steckverbinder mit 0,6 mm Rastermaß und 3 bis 4 mm Höhe – Serie FX8 | ||
| ab∗ | 1.39 € *Stückpreis Standardkonfiguration Mengenrabatt | 0.37 € *Stückpreis Standardkonfiguration Mengenrabatt | 2.04 € *Stückpreis Standardkonfiguration Mengenrabatt | 8.91 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.56 € *Stückpreis Standardkonfiguration Mengenrabatt | 1.94 € *Stückpreis Standardkonfiguration Mengenrabatt |
| Minimum Lieferzeit ： | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage |
| Steckerform | - | - | - | - | - | - |
| A· B· C | - | - | - | - | - | - |
| D· E· F | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | - |
| G·H·I | - | - | - | - | - | Sonstige |
| M·N·O | - | - | - | - | - | - |
| P· Q· R | - | - | - | - | - | - |
| S· T· U | - | - | - | - | - | - |
| V· W· X | - | - | - | - | - | - |
| Anzahl | - | - | - | - | - | - |
| paßender Sift / Kontakt | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) | Stecker (Stecker) / Buchse (Buchse) | Stecker (Stecker) / Buchse (Buchse) | Buchse (Buchse) |
| Anzahl der Adern | 20 ～ 100 | 60 ～ 140 | 20 ～ 80 | 40 ～ 140 | 60 ～ 140 | 6 |
| Anwendung | Platine-zu-Platine | Platine-zu-Platine | Platine-zu-Platine | Platine-zu-Platine | Platine-zu-Platine | Für Leiterplatten |
| Zulässiger Strom(A) | 0.5 | 0.4 | 0.5 | 0.5 | 0.4 | 1 |
| Zulässige Spannung(V) | AC100 | AC100 | AC100 | AC100 | AC100 | AC100 |
| Verdrahtungsverfahren | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige | Sonstige |
| Anschlussrichtung | Gerade | Gerade | Winkel | Gerade / Winkel | Gerade | Winkel |
| Schutzfunktion (umweltbeständig) | - | - | - | - | - | - |
| Repräsentativer Standard | - | - | - | - | - | - |
Loading...
Filtern nach:
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Steckerform
- Rund
- Quadratisch
-
A· B· C
- Sonstige
-
D· E· F
- DIN/Mini-DIN
- Sonstige
-
G·H·I
- Sonstige
-
M·N·O
- Sonstige
-
P· Q· R
- Sonstige
-
S· T· U
- USB
-
V· W· X
-
Anzahl
- Sonstige
-
paßender Sift / Kontakt
- Stecker (Stecker)
- Buchse (Buchse)
- Sonstige
-
Anzahl der Adern
-
Anwendung
-
Zulässiger Strom(A)
-
Zulässige Spannung(V)
-
Verdrahtungsverfahren
- Lötmittel
- Crimp
- Pressschweißen
- Befestigung mit Schrauben
- Sonstige
-
Anschlussrichtung
- Gerade
- Winkel
-
Schutzfunktion (umweltbeständig)
-
Repräsentativer Standard
Suchergebnisse durch Herstellerauswahl einschränken
-
- HIROSE ELECTRONIC (6)
- FUJIKURA (DDK) (0)
- HONDA TSUSHIN KOGYO (0)
- HARTING (0)
- MOLEX (0)
- WEIDMÜLLER (0)
- ERNI (0)
- OMRON (0)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Steckverbinder für Platinen
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.