HOZAN Schraubendreher（Grip Type：Kunststoff）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
- Sonderpreis
Keramik-Abgleichschraubendreher, Satz, D-17
HOZAN
A long screwdriver that's convenient for adjustment inside equipment.
[Features]
· With a sewn case that is resistant to friction and pulling.
· Uses zirconia ceramic that stands out among fine ceramics specifically for its exceptional strength and elasticity.
· Has high abrasion resistance and maintains cutting edge precision for a long time even for tip-type semi-fixed knob adjustment work.
[Applications]
· The 110 mm long shaft makes it ideal for adjusting parts in deep places.- Mengenrabatt
ab∗ ： 64.90 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
Auswechselbarer Keramik-Abgleichschraubendreher, D-280
HOZAN
· A perfect driver for adjusting pre-set knobs/capacitors on printed circuit boards.
[Features]
· Uses zirconia ceramic that does not cause coil misalignment.
· Has greater durability against wear and damage than alumina ceramics.
* Alumina ceramic: Fine ceramic. Besides abrasion resistance, it is excellent in heat and chemical resistance.
[Applications]
· Combination: D-280, -0.9 x -1.8 mm, blade thickness 0.4 mm (D-282), -1.3 x -2.6 mm, blade thickness 0.4 mm (D-283).- Mengenrabatt
ab∗ ： 69.44 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
-
- Sonderpreis
Mutterndreher, D-840
HOZAN
A convenient nut driver (box driver) handy for quick turning of nuts and bolts.
[Features]
· Shaft length is 100 mm and is also ideal for nuts in deep places where hands get in the way.
· Box depth is 18 mm for screws with a long shaft; the area where the screw protrudes from the nut can also be used.
· Black oxide processing forms an oxidation film during rustproofing treatment.
[Applications]
· Ideal for small nuts for hobby use.
· M2 screws which are ideal for the wheel nuts of electric four-wheel drive vehicles (no lock, 4 mm width across flats).- Mengenrabatt
ab∗ ： 6.77 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
LED-Elektroschrauber, D-745
HOZAN
An LED type inspection screwdriver with high visibility.
[Features]
· Batteries can be changed.
· Applicable ranges: 100 to 240 VAC, tip size of 2.5 x 0.6 mm, total length of 139 mm, shaft length of 17 mm, shaft diameter of 2.5 mm.
· Handle diameter 16 mm, weight 23 g.
· Be sure to check the light before use.
· Be careful of short circuit and electric shock.
[Applications]
· Used for determining AC polarity and checking electrical conductance.
· Can be used within the applicable range.- Mengenrabatt
ab∗ ： 14.71 € Minimum Lieferzeit ： 6 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| Tip standards |
| Tip size / Phillips (+) |
| Tip size / flathead (-) blade width (mm) B1 |
| Shaft length L (mm) |
| Single Product/Set Classification |
| Shaft type |
| Magnet |
| Shaft through |
| Bolster |
| Grip Type |
| Tip size / flathead (-) blade thickness (mm) B2 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) |
| (Box/Hex/Ball-Point) Width Across Flats (inch) |
|
|
|
| |
| Warenzeichen | HOZAN | HOZAN | HOZAN | HOZAN |
| Artikelserie | ||||
| ab∗ | 64.90 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 69.44 € *Stückpreis Standardkonfiguration Mengenrabatt | 6.77 € Besonderer Preis *Stückpreis Standardkonfiguration Sonderpreis | 14.71 € *Stückpreis Standardkonfiguration Mengenrabatt |
| Minimum Lieferzeit ： | Versand am selben Tag | 6 Arbeitstage | Versand am selben Tag | 6 Arbeitstage |
| Tip standards | Kreuzschlitz (+)/Senkkopf (-) | Senkkopf (-) | Packung | Senkkopf (-) |
| Tip size / Phillips (+) | Nr. 0 | - | - | - |
| Tip size / flathead (-) blade width (mm) B1 | 1.3 ～ 1.8 | 0.9 ～ 2.6 | - | 2.5 |
| Shaft length L (mm) | 110 | - | 125 | 17 |
| Single Product/Set Classification | Produktsatz | Produktsatz | Einzelstück | Einzelstück |
| Shaft type | Rund | Rund | Rund | Rund |
| Magnet | N/A | N/A | N/A | N/A |
| Shaft through | N/A | - | N/A | N/A |
| Bolster | N/A | - | N/A | N/A |
| Grip Type | Kunststoff | Kunststoff | Kunststoff | Kunststoff |
| Tip size / flathead (-) blade thickness (mm) B2 | 0.4 | 0.4 | - | 0.6 |
| (Box/Hex/Ball-Point) Width Across Flats (mm) | - | - | 8 | - |
| (Box/Hex/Ball-Point) Width Across Flats (inch) | - | - | - | - |
Loading...
Filtern nach:
Stock
-
- Stock Items Included
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
Tip standards
- Kreuzschlitz (+)
- Senkkopf (-)
- Kreuzschlitz (+)/Senkkopf (-)
- Torx
- Packung
- Sechskant
- Kugelkopf
- Kombination
- Sonstige
-
Tip size / Phillips (+)
- Nr. 000
- Nr. 00
- Nr. 0
- Nr. 1
- Nr. 2
- Nr. 3
- Nr. 4
- Sonstige
-
Tip size / flathead (-) blade width (mm) B1
-
Shaft length L (mm)
-
Single Product/Set Classification
- Einzelstück
- Produktsatz
-
Shaft type
- Rund
- Quadratisch
-
Magnet
- Verfügbar
- N/A
-
Shaft through
- Verfügbar
- N/A
-
Bolster
- im Lieferumfang enthalten
- N/A
-
Grip Type
- Kunststoff
- Holzgriff
- Kautschuk
- Edelstahl
-
Tip size / flathead (-) blade thickness (mm) B2
-
(Box/Hex/Ball-Point) Width Across Flats (mm)
-
(Box/Hex/Ball-Point) Width Across Flats (inch)
Suchergebnisse durch Herstellerauswahl einschränken
-
- MAEDAKINNZOKU (25)
- PB SWISS TOOLS (23)
- ANEX (14)
- KTC(KYOTO TOOL) (10)
- SK 11 (8)
- ENGINEER (5)
- HOZAN (4)
- EIGHT TOOL (2)
- E VALUE (2)
- HIRAI KOGU (2)
- SUNFLAG (2)
- SIGNET (2)
- TRAD (2)
- TRUSCO NAKAYAMA (2)
- HANDIWORK (1)
- SMATO (1)
- GEDORE (0)
- AS ONE (0)
- CUSTOM KOBO (0)
- MATADOR (0)
- PROXXON MICROMOT (0)
- RITTAL (0)
- WOLFCRAFT (0)
- WEIDMÜLLER (0)
- FACOM (0)
- OSG (0)
- SUEKAGE TOOL (0)
- WIHA (0)
- BAHCO (0)
- CIMCO (0)
- VESSEL (0)
- BERNSTEIN AG (0)
- WERA (0)
- HAZET (0)
- KNIPEX (0)
- PHOENIX CONTACT (0)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Weitere Kategorien aus dem Produktbereich Schraubendreher
-
- Ratschenschlüssel / Ringschlüssel / Schraubenschlüssel
- Steckschlüssel
- Innensechskantschlüssel
- Sechsrund-Schlüssel (TX/E)
- Schraubendreher
- Bits für Schraubendreher / Schraubendrehereinsätze
- Blechbearbeitung
- Zangen / Kneifzangen / Pinzetten
- Universalschlüssel
- Werkzeuge für Wasserversorgungs-/Klimaleitungen
- Werkzeuge für Elektroanlagen
- Werkzeug-Sets/Werkzeugkästen
- Pinzetten, Klemmen, Zangen
- Fahrzeug-Wartungswerkzeuge
-
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.