TYPENCODE Suche | *NOT READY*: #CODE

Suchwort-Vorschlag

Vorgeschlagene Teilenummer

Auslaufprodukte

HOZAN Zangen / Kneifzangen / Pinzetten（Product Category：Kneifzangen）

Daten, die angezeigt werden sollen: 30; 45; 60

Sortieren nach:

Lieferzeit	Alle Produkte Versand am selben Tag 3 Tage oder weniger 4 Tage oder weniger 5 Tage oder weniger 6 Tage oder weniger 7 Tage oder weniger 8 Tage oder weniger 9 Tage oder weniger 10 Tage oder weniger 11 Tage oder weniger

?* Informationen zur Lieferzeit und Preisen

Schrägzange, N-4

HOZAN

Angled finishing nippers with great sharpness.
[Features]
· Sharp and easy-to-use angled blade that's suitable for cutting copper wires.
[Applications]
· Ideal for vertical cutting of parallel lines.

Mengenrabatt

ab^∗ ：	32.14 €
Minimum Lieferzeit ：	Versand am selben Tag

*Stückpreis Standardkonfiguration

Vornschneider, N-36

HOZAN

Nippers ideal for cutting in deep places.
[Features]
· End component of the nippers has a blade so finish of the cross section is almost flat.
· The thin blade width of 3 mm makes it ideal for densely wired places.
· For cutting in deep places (vertical type).
[Applications]
· Ideal for cutting at dense and deep places.

ab^∗ ：	55.32 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Schwere Schere, N-838

HOZAN

Scissors for cutting thin aluminum plates and copper wires.
[Features]
· Hard chrome-plated finish with high wear resistance and smooth sharpness maintained.
· Cutting capacity (copper stranded wire): 2 mm2.
· Aluminum plate thickness: 0.5 mm.
· Hardness HRC (blade) of 59.
[Applications]
· Ideal for cutting thin films and paper.

ab^∗ ：	26.05 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Miniatur-Seitenschneider, N-34

HOZAN

Copper and other soft wire dedicated nippers that place emphasis on the cutting surface finish.
[Features]
· Compact size of about 100 mm total length that fits in the palm of a woman.
· Ideal for precision work with a sense of size that makes rotation easy to control.
· With a cutting edge that can cut lightly and produces a clean cross-section, finished exclusively for copper wires.
· Has thin and flat blades that can do side cutting with little protrusion of the binding band, and can be used to work without injuring the hands.
· The handle is soft to grip and has anti-static (ESD) specifications that allow it to be used even in an electronic environment without any concerns.
· Adopts a coil spring with excellent durability and recoverability, and allows fatigue-free work even when constantly holding the tool.
[Applications]
· Ideal for cutting zip ties and thin copper wires, or precision work.

ab^∗ ：	39.36 €
Minimum Lieferzeit ：	9 Arbeitstage

*Stückpreis Standardkonfiguration

Miniatur-Seitenschneider, N-32

HOZAN

Small nippers suitable for precision work.
[Features]
· Compact size of 130 mm total length that fits in the palm. It provides excellent maneuverability and ease of use.
· Small body convenient for cutting binding bands in a limited space.
· With a cutting edge that can cut lightly and produces a clean cross-section, finished exclusively for copper wires.
· The cut end of the binding band is less likely to jump out, thus preventing hand injuries.
· Chamfering of sharp projections of the rotating part prevents inadvertent injuries and promotes safe work.
[Applications]
· Ideal for cutting soft wires such as copper.

ab^∗ ：	36.09 €
Minimum Lieferzeit ：	8 Arbeitstage

*Stückpreis Standardkonfiguration

Miniatur-Seitenschneider, N-35

HOZAN

Miniature nippers with an anti-static grip to enable use at electronics sites.
[Features]
· Anti-static (ESD) specification elastomer grip for the handle.
· Adopts a coil spring with excellent durability and recoverability, and does not cause fatigue even when constantly holding the tool.
· For cutting copper wire (thin blade finish).
· The cutting edge is made sharp (shallow angle) to achieve light handling of the handle and excellent sharpness.
[Applications]
· Convenient for cutting copper wire.

ab^∗ ：	37.15 €
Minimum Lieferzeit ：	7 Arbeitstage

*Stückpreis Standardkonfiguration

Präzisionsseitenschneider, N-58

HOZAN

Highly durable precision nippers with lead stoppers included.
[Features]
· A semi-flush cut type.
· Cutting capacity (copper wire): 0.18 to 0.8 mm diameter (lead stopper effective range).
· Hardness HRC: Body/46.
· Blade: 60.
· Weight: 40 g.
· ESD control value: Ground resistance Rg < 1 x 10¹² Ω.
[Applications]
· Ideal for cutting the leads of resistors, capacitors, etc.

ab^∗ ：	92.08 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Vornschneider, N-33

HOZAN

Nippers with a long blade length.
[Features]
· Equipped with coil spring to prevent fatigue even during continuous work.
· As the blade is long, it is possible to cut 4 wires coming out of a modular jack at once.
[Applications]
· Ideal for cutting in deep places (slanted type).

Mengenrabatt

ab^∗ ：	43.46 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Seitenschneider, N-12

HOZAN

Nippers with a sliding part that adopts a round Tyco type to enable heavy duty cutting.
[Features]
· Copper wire: 3.2 mm diameter, copper wire: 3.5 mm², iron wire: 1.9 mm diameter, VVF: 1.6 mm diameter x 2 cores.
· Round rubberized sliding portion capable of powerful cutting.
[Applications]
· Powerful type with round rubberized-type grip, ideal for cutting copper wires and iron wires.

ab^∗ ：	28.98 €
Minimum Lieferzeit ：	6 Arbeitstage

*Stückpreis Standardkonfiguration

Seitenschneider, N-9-125 / N-9-150

HOZAN

Nipper of professional grade that combines usability and durability.
[Features]
· Has a strip hole that supports the use of thick wires.
· Two sizes are available (N-9-125/N-9-150).
· Elastomer is used for the grip.
· The elastomer grip feels great to touch and is recommended for extended periods of use.
[Applications]
· Convenient when working with thick wires.

ab^∗ ：	36.68 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Multi-Schere, N-839

HOZAN

A multi-snip tool that can cut thin plates of aluminum plate in addition to VVR.
[Features]
· Cutting capacity (VCT wire): 3.5 mm2 x 4 cores.
· VVR wire: 3.5 mm2 x 3-cores.
· Aluminum plate: 1.2 mm.
· Copper stranded wire: 8 mm2.
· Hardness HRC (blade): 58.
[Applications]
· Ideal for cutting and stripping thick wires.

ab^∗ ：	38.38 €
Minimum Lieferzeit ：	7 Arbeitstage

*Stückpreis Standardkonfiguration

Miniatur-Seitenschneider, N-31

HOZAN

Small nippers with a total length of 100 mm to fit the hand for easy use, suitable for precision work.
[Features]
· Cutting edge with emphasis on the cut surface finish for soft wires such as copper wire.
· Small body convenient for cutting binding bands in a limited space.
· Because it is a curved blade that can do side cutting, the band protrudes very little, with consideration given to safety for the fingers.
· Chamfering of sharp projections of the rotating part prevents inadvertent injuries and promotes safe work.
· Anti-static (ESD) specification carbon-free elastomer grip for safe work with electronics.
· Adopts a coil spring with excellent durability and recoverability, reducing fatigue during long-term work.
[Applications]
· The small body makes it convenient for cutting work in limited spaces.

ab^∗ ：	35.76 €
Minimum Lieferzeit ：	7 Arbeitstage

*Stückpreis Standardkonfiguration

Schrägzange (mit Loch) , N-5

HOZAN

Oblique blade type nippers with a strip hole.
[Features]
· With hole for N-4 wire strip.
[Applications]
· Ideal for vertical cutting of parallel lines.

Mengenrabatt

ab^∗ ：	38.24 €
Minimum Lieferzeit ：	6 Arbeitstage

*Stückpreis Standardkonfiguration

Präzisionsseitenschneider, N-55

HOZAN

Nipper with a high-precision finish achieved via a combination of high-durability material and precision machining.
[Features]
· HOZAN's precision series made of alloy steel molded in precision grinding with toughness and hardness used for cutting tools.
· Enables safe precision wiring work without short circuit, discharge or scratches to parts.
· The machined handle portion has been thinned down to 1.7 mm, opens and closes smoothly, and features improved durability.
· Provides high toughness to the inner material hidden by the grip with an electrostatic discharge (ESD) specification.
· The precision set pin provides a box joint structure with fewer backlashes and smooth sliding part.
· Produces a full flush cut with only a single line, without burrs on the cut cross section.
[Applications]
· Optimal for work in narrow places with its fine blade size.

ab^∗ ：	83.96 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Schwere Schere (Gezahnt) , N-841

HOZAN

Heavy-snippers that have wear-resistance improved by about 60% compared to conventional models.
[Features]
· Hard chrome-plated finish with high wear resistance and smooth sharpness maintained.
· Also suitable for cutting aramid fibers used for optical fiber cables, etc.
[Applications]
· Ideal for cutting thin aluminum plates or copper wires.

ab^∗ ：	33.63 €
Minimum Lieferzeit ：	5 Arbeitstage

*Stückpreis Standardkonfiguration

Seitenschneider, N-23

HOZAN

Nippers that come equipped with a coil spring to prevent fatigue even during continuous work.
[Features]
· Uses an elastomer grip which is soft on the hands.
· Equipped with coil spring to prevent fatigue even during continuous work.
· Long blade length.
· Can be used to cut the wires coming out of the modular jack at once.
· Not too long and not too short to be a size that feels just right.
[Applications]
· Cutting wiring cords, etc.

ab^∗ ：	47.07 €
Minimum Lieferzeit ：	7 Arbeitstage

*Stückpreis Standardkonfiguration

Seitenschneider für Zange N-25

HOZAN

[Merkmale]
· Zum Schneiden und Entgraten von Angüssen.
· Angüsse beim Spritzgießen von Kunststoffartikeln. Ideal zum Schneiden und Entgraten.

ab^∗ ：	49.02 €
Minimum Lieferzeit ：	7 Arbeitstage

*Stückpreis Standardkonfiguration


Warenzeichen
Artikelserie
ab^∗
Minimum Lieferzeit ：
Product Category
Plier Type
Plier Type
Nipper Type
Overall Length(mm)
Shaft/hole
With or without Spring
Steel Wire Cutting Performance(φ/mm)
Copper Wire Cutting Performance(φ/mm)
Piano Wire Cutting Performance(φ/mm)
Plastic Cutting Performance(φ/mm)
Stranded Wire Cutting Ability(φ/mm)
Stainless steel cutting ability(φ/mm)
VA (VVF) Wire Cutting Capacity(φ/mm)
With/without tip claw replacement function
Tip claw diameter(mm)
Compatible Ring Size(mm)
Parts Type


Warenzeichen	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN	HOZAN
Artikelserie	Schrägzange, N-4	Vornschneider, N-36	Schwere Schere, N-838	Miniatur-Seitenschneider, N-34	Miniatur-Seitenschneider, N-32	Miniatur-Seitenschneider, N-35	Präzisionsseitenschneider, N-58	Vornschneider, N-33	Seitenschneider, N-12	Seitenschneider, N-9-125 / N-9-150	Multi-Schere, N-839	Miniatur-Seitenschneider, N-31	Schrägzange (mit Loch) , N-5	Präzisionsseitenschneider, N-55	Schwere Schere (Gezahnt) , N-841	Seitenschneider, N-23	Seitenschneider für Zange N-25
ab^∗	32.14 € *Stückpreis Standardkonfiguration Mengenrabatt	55.32 € *Stückpreis Standardkonfiguration	26.05 € *Stückpreis Standardkonfiguration	39.36 € *Stückpreis Standardkonfiguration	36.09 € *Stückpreis Standardkonfiguration	37.15 € *Stückpreis Standardkonfiguration	92.08 € *Stückpreis Standardkonfiguration	43.46 € *Stückpreis Standardkonfiguration Mengenrabatt	28.98 € *Stückpreis Standardkonfiguration	36.68 € *Stückpreis Standardkonfiguration	38.38 € *Stückpreis Standardkonfiguration	35.76 € *Stückpreis Standardkonfiguration	38.24 € *Stückpreis Standardkonfiguration Mengenrabatt	83.96 € *Stückpreis Standardkonfiguration	33.63 € *Stückpreis Standardkonfiguration	47.07 € *Stückpreis Standardkonfiguration	49.02 € *Stückpreis Standardkonfiguration
Minimum Lieferzeit ：	Versand am selben Tag	5 Arbeitstage	5 Arbeitstage	9 Arbeitstage	8 Arbeitstage	7 Arbeitstage	5 Arbeitstage	5 Arbeitstage	6 Arbeitstage	5 Arbeitstage	7 Arbeitstage	7 Arbeitstage	6 Arbeitstage	5 Arbeitstage	5 Arbeitstage	7 Arbeitstage	7 Arbeitstage
Product Category	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen
Plier Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Plier Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Nipper Type	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen	Kneifzangen
Overall Length(mm)	133 ～ 158	117.5	162	102.5	128.5	128.5	105	116	163	135 ～ 152.5	190	102.5	133 ～ 158	105	160	133	132,5
Shaft/hole	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
With or without Spring	N/A	Verfügbar	N/A	Verfügbar	Verfügbar	Verfügbar	N/A	Verfügbar	N/A	N/A	Verfügbar	Verfügbar	N/A	Verfügbar	-	Verfügbar	Verfügbar
Steel Wire Cutting Performance(φ/mm)	1.2 ～ 1.4	-	-	-	-	-	-	-	1.9	1.6 ～ 1.9	-	-	1.2 ～ 1.4	-	-	-	-
Copper Wire Cutting Performance(φ/mm)	2 ～ 2.6	1	-	1	2	1.6	0.18～0.8	1	3.2	2.6 ～ 3.2	-	1.6	2 ～ 2.6	1	-	1.6	-
Piano Wire Cutting Performance(φ/mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Plastic Cutting Performance(φ/mm)	-	1.5	-	-	-	-	-	-	-	-	-	-	-	-	-	-	5,0
Stranded Wire Cutting Ability(φ/mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Stainless steel cutting ability(φ/mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
VA (VVF) Wire Cutting Capacity(φ/mm)	-	-	-	-	-	-	-	-	1.6 x 2 core	-	-	-	-	-	-	-	-
With/without tip claw replacement function	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Tip claw diameter(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Compatible Ring Size(mm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
Parts Type	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Filtern nach:

Stock

- Stock Items Included
Zurücksetzen

Suchergebnisse durch Auswahl der Spez./Maße einschränken

Product Category
- Zangen
- Zangen
- Kneifzangen
- Teile
Zurücksetzen

Plier Type
- Zangen
- Zange für Sicherungsringe
Zurücksetzen

Plier Type
- Zangen
- Plombierzangen
- Zangen mit langen Backen
Zurücksetzen

Nipper Type
- Kneifzangen
- Wärmekneifzange
Zurücksetzen

Overall Length(mm)
36

46

92

100

102.5

105

108

110

111.5

115

116

117

117.5

118

120

123

124

125

125.5

126

127

128

128.5

130

131

132

132,5

133

134

135

138

139

140

141

142

143

144

145

146

148

149

150

151

152

152.5

153

154

155

156

157

158

158.5

159

160

161

162

163

164

165

166

167

168

169

170

171

172

174

175

178

180

181

183

185

186

188

190

192

195

197

199

200

Approx. 200

201.5

202

203

204

205

206

208

210

213

214.5

215

217

219

220

223

223.5

224

225

227

228

229

230

240

242

245

250

266

Approximately 275

280

282

Approximately 285

290

293

295

297

300

305

310

320

400

455

570

600
Zurücksetzen

Shaft/hole
- Für Schaft
- Für Bohrung
- Verwendung mit Schaft und Bohrung
Zurücksetzen

With or without Spring
- Verfügbar
- N/A
Zurücksetzen

Steel Wire Cutting Performance(φ/mm)
0.5

0.8

0.8 (Soft Iron Wire)

Tip blade: 0.8 or less, Side blade: 1.2 or less

0.9

1

1.0 (Soft Iron Wire)

1.2

1.2 (Soft Iron Wire)

1.4

1.5

1.6

1.8

1.9

2

2.15

2.2

2.4

2.5

2.6

2.75

2.8

3

3.2

3.4

3.5

3.6

4

5.0

-
Zurücksetzen

Copper Wire Cutting Performance(φ/mm)
0.10～0.60

0.1～0.80

0.1 to 1.00

0.18～0.8

0.20～0.80

0.8

1

1.2

Tip blade: 1.2 or less, Side blade: 1.2 or less

1.5

1.6

2

2.3

2.5

2.6

2.8

3

3.2

3.3

3.5

3.6

4

4.5

8.0

14

-
Zurücksetzen

Piano Wire Cutting Performance(φ/mm)
0.5

0.75

1

1.2

1.8

2

2.2

2.5

3

3.6
Zurücksetzen

Plastic Cutting Performance(φ/mm)
1

1.5

2

3

4

5

5,0

8

9

10
Zurücksetzen

Stranded Wire Cutting Ability(φ/mm)
1.25

2

5

5.5

8
Zurücksetzen

Stainless steel cutting ability(φ/mm)
0.8

0.9

1

1.2

2

5.0
Zurücksetzen

VA (VVF) Wire Cutting Capacity(φ/mm)
1.6 x 2 core

1.6・2・2.6

1.6 x 3 core

1.6X3 core

1.6×3

2.0 x 2 core

2 x 3 core

2.0 × 3 core

2.0X3 core

2X3 core

2.0×3

2.0 x 4 Kern

2.6 x 3 core

2.6X3 core
Zurücksetzen

With/without tip claw replacement function
- Verfügbar
- N/A
Zurücksetzen

Tip claw diameter(mm)
0.9

1.4

1.8

2

2.3

3.2

3.4

3.5

4.5
Zurücksetzen

Compatible Ring Size(mm)
3-4

3–8

5-9

C-type for shaft: 10-30; Grip-type for shaft: 6-9; For hole: 12-30

10-25

12~13

19~30

19～40

25-50

32~75

32–80

40-65

82-180
Zurücksetzen

Parts Type
- Klingenspitze
- Feder
- Zange mit Schnappringspitze
Zurücksetzen

Suchergebnisse durch Herstellerauswahl einschränken

- MUROMOTO TEKKO (40)
- HOZAN (17)
- KNIPEX (13)
- FUJIYA (9)
- THREE PEAKS GIKEN (5)
- KEIBA (3)
- SMATO (3)
- LINDSTROM (2)
- TSUNODA (2)
- MAEDAKINNZOKU (2)
- ANEX (1)
- AS ONE (1)
- HANAZONO TOOL (1)
- KTC(KYOTO TOOL) (1)
- NEPROS (1)
- WOLFCRAFT (0)
- HANDIWORK (0)
- M & M (0)
- SUPER TOOL (0)
- TRAD (0)
- H & H (0)
- ONISHI MANUFACTURING (0)
- RITTAL (0)
- WELLER (0)
- SIGNET (0)
- FACOM (0)
- SK 11 (0)
- E VALUE (0)
- HAZET (0)
- IGARASHI PLIERS (0)
- BAHCO (0)
- GEDORE (0)
- BERNSTEIN AG (0)
- WEIDMÜLLER (0)
- WIHA (0)
- LOBTEX (0)
- RENNSTEIG (0)
- ENGINEER (0)
- TRUSCO NAKAYAMA (0)
- PHOENIX CONTACT (0)
- 엔더블유에스 (0)
- CIMCO (0)
Zurücksetzen