KANEMITSU Flexibel mit Flansch（Modell：Zubehörteile）
| Lieferzeit |
|
|---|
?* Informationen zur Lieferzeit und Preisen
-
- Sonderpreis
SNS Flansch flexible Wellenkupplung, Kautschuktüllen
KANEMITSU
The rubber material quality is based on JIS K6386. A flexible structure that is elastic and vibration-proof.- Mengenrabatt
ab∗ ： 1.42 € Besonderer Preis Minimum Lieferzeit ： Versand am selben Tag *Stückpreis Standardkonfiguration
-
SNS Flansch flexible Wellenkupplung, Kits für zu verbindende Teile
KANEMITSU
The material used for the bolts, nuts, and washer is SS400, and the material for the spring washers is SWRH62, and the rubber material quality is based on JIS K6386. A flexible structure that is elastic and vibration-proof.ab∗ ： 6.60 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
SNS Flansch-Modell: montierte Schrauben für die Wellenkupplung
KANEMITSU
Schraube und Mutter sind aus EN 1.0038 Equiv., und Federscheibe, SWRH62.ab∗ ： 4.95 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 28.38 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
STB-Buchse 4225
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.
[Features]
· No need to create shaft holes or key grooves.
· It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
· Extremely strong grip and can be used without a key with light loads.
· Does not require a cover or set screw.
· Changes to the shaft hole diameter and rpm are extremely smooth.
· Pulley replacement is easy and can be used as a substitute for a transmission.
· Eliminates outer diameter vibrations at the center of the shaft hole.
· Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
· Easy to design using millimeter dimensions.
· A design that is based on a bushing type that has a strong track record in the US and Europe.
· Can reduce costs by more than 20% compared with conventional products using inventory control, shortened delivery time, and increasing operating efficiency, etc.ab∗ ： 30.80 € Minimum Lieferzeit ： 5 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 41.60 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
STB-Buchse 6340
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.
[Features]
· No need to create shaft holes or key grooves.
· It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
· Extremely strong grip and can be used without a key with light loads.
· Does not require a cover or set screw.
· Changes to the shaft hole diameter and rpm are extremely smooth.
· Pulley replacement is easy and can be used as a substitute for a transmission.
· Eliminates outer diameter vibrations at the center of the shaft hole.
· Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
· Easy to design using millimeter dimensions.
· A design that is based on a bushing type that has a strong track record in the US and Europe.
· Can reduce costs by more than 20% compared with conventional products using inventory control, shortened delivery time, and increasing operating efficiency, etc.ab∗ ： 60.92 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 75.99 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 133.83 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
STB-Buchse 11080
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.
[Features]
· The bushing is used as a part for tightening a shaft with any type of rotating body such as a pulley, gear, sprocket wheel, and coupling, and can be used to very easily attach or separate these types of rotating bodies and the shaft which leads to greatly reduced costs associated with processing, assembly, maintenance, and inspection to provide comprehensive cost benefits.
· Shaft hole key grooves have been machined into the bushing to provide benefits such as consistent accuracy and shortened delivery time.
· The STB bushing system covers all of these benefits and greatly contributes to saving labor and reducing total costs.
· It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
· Can be used without a key with light loads. Does not require a cover or set screw.
· Pulley replacement is easy and can be used as a substitute for a transmission.
· Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
· Easy to design using millimeter dimensions.
· A design that is based on a bushing type used in the US and Europe.·ab∗ ： 108.39 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
ab∗ ： 168.96 € Minimum Lieferzeit ： 9 Arbeitstage *Stückpreis Standardkonfiguration
-
STB-Buchse 14090
KANEMITSU
Millimeter dimensions with no need to create shaft holes or key grooves.
[Features]
· No need to create shaft holes or key grooves.
· It is easy to attach and remove the shaft, the positioning can be performed freely on the shaft, and eliminate fretting wear on the shaft due to the sturdy fastening with the shaft.
· Extremely strong grip and can be used without a key with light loads.
· Does not require a cover or set screw.
· Changes to the shaft hole diameter and rpm are extremely smooth.
· Pulley replacement is easy and can be used as a substitute for a transmission.
· Eliminates outer diameter vibrations at the center of the shaft hole.
· Can sufficiently increase the bushing vibration accuracy which provides peace of mind during use.
· Easy to design using millimeter dimensions.
· A design that is based on a bushing type that has a strong track record in the US and Europe.
· Can reduce costs by more than 20% compared with conventional products using inventory control, shortened delivery time, and increasing operating efficiency, etc.ab∗ ： 263.19 € Minimum Lieferzeit ： 8 Arbeitstage *Stückpreis Standardkonfiguration
| Warenzeichen |
|---|
| Artikelserie |
| ab∗ |
| Minimum Lieferzeit ： |
| zulässiger Drehmomentbereich(N·m) |
| Max. Drehzahlbereich(r/min) |
| O.D. A(φ) |
| Gesamtlänge W(mm) |
| Eigenschaft |
| Haupteinheits-Material |
| Modell |
| Zulässiges Anzugsmoment(Nm) |
| Max. Drehzahl(r/min) |
| Zulässiger Exzentrizitätsbereich(mm) |
| Zulässiger Radialversatz(mm) |
| Zulässiger Winkelversatz(Grad) |
| Anwendung |
|
|
|
|
|
|
|
|
|
|
|
| |
| Warenzeichen | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU | KANEMITSU |
| Artikelserie | SNS Flansch flexible Wellenkupplung, Kits für zu verbindende Teile | SNS Flansch-Modell: montierte Schrauben für die Wellenkupplung | ||||||||||
| ab∗ | 1.42 € Besonderer Preis *Stückpreis Standardkonfiguration SonderpreisMengenrabatt | 6.60 € *Stückpreis Standardkonfiguration | 4.95 € *Stückpreis Standardkonfiguration | 28.38 € *Stückpreis Standardkonfiguration | 30.80 € *Stückpreis Standardkonfiguration | 41.60 € *Stückpreis Standardkonfiguration | 60.92 € *Stückpreis Standardkonfiguration | 75.99 € *Stückpreis Standardkonfiguration | 133.83 € *Stückpreis Standardkonfiguration | 108.39 € *Stückpreis Standardkonfiguration | 168.96 € *Stückpreis Standardkonfiguration | 263.19 € *Stückpreis Standardkonfiguration |
| Minimum Lieferzeit ： | Versand am selben Tag | 5 Arbeitstage | 9 Arbeitstage | 5 Arbeitstage | 5 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 9 Arbeitstage | 8 Arbeitstage |
| zulässiger Drehmomentbereich(N·m) | - | - | - | - | - | - | - | - | - | - | - | - |
| Max. Drehzahlbereich(r/min) | - | - | - | - | - | - | - | - | - | - | - | - |
| O.D. A(φ) | - | - | - | - | - | - | - | - | - | - | - | - |
| Gesamtlänge W(mm) | - | - | - | - | - | - | - | - | - | - | - | - |
| Eigenschaft | - | - | - | - | - | - | - | - | - | - | - | - |
| Haupteinheits-Material | Harz | Stahl | Stahl | Stahl | Stahl | Stahl | Stahl | Stahl | Stahl | Stahl | Stahl | Stahl |
| Modell | Zubehörteile | Zubehörteile | Zubehörteile | Zubehörteile | Zubehörteile | Zubehörteile | Zubehörteile | Zubehörteile | Zubehörteile | Zubehörteile | Zubehörteile | Zubehörteile |
| Zulässiges Anzugsmoment(Nm) | - | - | - | - | - | - | - | - | - | - | - | - |
| Max. Drehzahl(r/min) | - | - | - | - | - | - | - | - | - | - | - | - |
| Zulässiger Exzentrizitätsbereich(mm) | - | - | - | - | - | - | - | - | - | - | - | - |
| Zulässiger Radialversatz(mm) | - | - | - | - | - | - | - | - | - | - | - | - |
| Zulässiger Winkelversatz(Grad) | - | - | - | - | - | - | - | - | - | - | - | - |
| Anwendung | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard | Standard |
Loading...
Filtern nach:
Stock
-
- Stock Items Included
Suchergebnisse durch Auswahl der Spez./Maße einschränken
-
zulässiger Drehmomentbereich(N·m)
-
Max. Drehzahlbereich(r/min)
-
O.D. A(φ)
-
Gesamtlänge W(mm)
-
Eigenschaft
- Schwingungsdämpfung
- Unbearbeitete Wellenbohrung
-
Haupteinheits-Material
- Stahl
- Harz
-
Modell
- Haupteinheit
- Zubehörteile
-
Zulässiges Anzugsmoment(Nm)
-
Max. Drehzahl(r/min)
-
Zulässiger Exzentrizitätsbereich(mm)
-
Zulässiger Radialversatz(mm)
-
Zulässiger Winkelversatz(Grad)
-
Anwendung
Suchergebnisse durch Herstellerauswahl einschränken
-
- KANEMITSU (12)
- KAYSEVEN (0)
- NBK (0)
Suchergebnisse durch Auswahl des CAD-Formats einschränken
-
- 2D
- 3D
Beispiele, wie Sie diese Komponenten verwenden können
Weitere Kategorien aus dem Produktbereich Flexibel mit Flansch
Bezahlverfahren
On-Demand-Fertigung
Zertifikate
Copyright © MISUMI Corporation All Rights Reserved.