NTN Lager-Bauteile

?* Informationen zur Lieferzeit und Preisen

• • Sonderpreis

  

  Innenringe / mit Schmierbohrung / IR

  NTN

  Optimal for use with shafts that cannot be surface hardened or finished,
  although shafts are often used directly as raceway surfaces without a needle roller bearing inner ring.

  • Mengenrabatt

  ab∗ ：	3.77 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Sicherungsringe / BR

  NTN

  A dedicated stop ring used when the track ring or retainer of a needle roller bearing is fixed in the axial direction, or guided.

  • Mengenrabatt

  ab∗ ：	0.24 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Sicherungsringe / WR

  NTN

  A dedicated stop ring used when the track ring or retainer of a needle roller bearing is fixed in the axial direction, or guided.
  
  [Features]
  · Although the shape is the same as a C-shaped concentric retaining ring as specified in JIS B 2804, this product has been manufactured to a smaller cross-sectional height (b) to accommodate a needle shaped bearing and to an even smaller size range.
  · Using a hard steel wire, a chemical treatment is applied to the surface.

  • Mengenrabatt

  ab∗ ：	0.29 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Dichtungen (G)

  NTN

  Seal specially designed for use with needle roller bearings with a small cross-section height.
  
  [Features]
  · Seal specially designed for use with needle roller bearings with a small cross-section height.
  · Contact seal made of synthetic rubber reinforced by steel plate, with an operating temperature range of -25° to 120°C, and 100°C or less for continuous use.
  · A G model with a single lip and a GD model with two lips are available.
  · Hardening and finishing by grinding of the contact surface of the seal is necessary in order to obtain good sealing performance.
  · In addition, there should not be any harmful damage or indentations on the contact surface of the seal.
  · The inner ring raceway surface should preferably be used as a seal contact surface.
  · A suitable press-fit between the seal and the housing can be obtained within a normal housing tolerance of G7 tp R7.

  • Mengenrabatt

  ab∗ ：	1.88 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

• • Sonderpreis

  

  Dichtungen (GD)

  NTN

  [Features]
  · Dedicated needle roller bearing seal with a small cross-section designed for needle roller bearings.
  · Contact seal made of synthetic rubber reinforced via steel plate.

  • Mengenrabatt

  ab∗ ：	3.27 €
  	Besonderer Preis
  Minimum Lieferzeit ：	Versand am selben Tag

  *Stückpreis Standardkonfiguration

Loading...